Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Add Maglev hashing scheduler to IPVS, from Inju Song.

 2) Lots of new TC subsystem tests from Roman Mashak.

 3) Add TCP zero copy receive and fix delayed acks and autotuning with
    SO_RCVLOWAT, from Eric Dumazet.

 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard
    Brouer.

 5) Add ttl inherit support to vxlan, from Hangbin Liu.

 6) Properly separate ipv6 routes into their logically independant
    components. fib6_info for the routing table, and fib6_nh for sets of
    nexthops, which thus can be shared. From David Ahern.

 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP
    messages from XDP programs. From Nikita V. Shirokov.

 8) Lots of long overdue cleanups to the r8169 driver, from Heiner
    Kallweit.

 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau.

10) Add traffic condition monitoring to iwlwifi, from Luca Coelho.

11) Plumb extack down into fib_rules, from Roopa Prabhu.

12) Add Flower classifier offload support to igb, from Vinicius Costa
    Gomes.

13) Add UDP GSO support, from Willem de Bruijn.

14) Add documentation for eBPF helpers, from Quentin Monnet.

15) Add TLS tx offload to mlx5, from Ilya Lesokhin.

16) Allow applications to be given the number of bytes available to read
    on a socket via a control message returned from recvmsg(), from
    Soheil Hassas Yeganeh.

17) Add x86_32 eBPF JIT compiler, from Wang YanQing.

18) Add AF_XDP sockets, with zerocopy support infrastructure as well.
    From Björn Töpel.

19) Remove indirect load support from all of the BPF JITs and handle
    these operations in the verifier by translating them into native BPF
    instead. From Daniel Borkmann.

20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha.

21) Allow XDP programs to do lookups in the main kernel routing tables
    for forwarding. From David Ahern.

22) Allow drivers to store hardware state into an ELF section of kernel
    dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy.

23) Various RACK and loss detection improvements in TCP, from Yuchung
    Cheng.

24) Add TCP SACK compression, from Eric Dumazet.

25) Add User Mode Helper support and basic bpfilter infrastructure, from
    Alexei Starovoitov.

26) Support ports and protocol values in RTM_GETROUTE, from Roopa
    Prabhu.

27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard
    Brouer.

28) Add lots of forwarding selftests, from Petr Machata.

29) Add generic network device failover driver, from Sridhar Samudrala.

* ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits)
  strparser: Add __strp_unpause and use it in ktls.
  rxrpc: Fix terminal retransmission connection ID to include the channel
  net: hns3: Optimize PF CMDQ interrupt switching process
  net: hns3: Fix for VF mailbox receiving unknown message
  net: hns3: Fix for VF mailbox cannot receiving PF response
  bnx2x: use the right constant
  Revert "net: sched: cls: Fix offloading when ingress dev is vxlan"
  net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
  enic: fix UDP rss bits
  netdev-FAQ: clarify DaveM's position for stable backports
  rtnetlink: validate attributes in do_setlink()
  mlxsw: Add extack messages for port_{un, }split failures
  netdevsim: Add extack error message for devlink reload
  devlink: Add extack to reload and port_{un, }split operations
  net: metrics: add proper netlink validation
  ipmr: fix error path when ipmr_new_table fails
  ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds
  net: hns3: remove unused hclgevf_cfg_func_mta_filter
  netfilter: provide udp*_lib_lookup for nf_tproxy
  qed*: Utilize FW 8.37.2.0
  ...

1 files changed, 327 insertions, 0 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
new file mode 100644
index 000000000000..c047da8752da
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2018, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "port_buffer.h"
+
+int mlx5e_port_query_buffer(struct mlx5e_priv *priv,
+			    struct mlx5e_port_buffer *port_buffer)
+{
+	struct mlx5_core_dev *mdev = priv->mdev;
+	int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
+	u32 total_used = 0;
+	void *buffer;
+	void *out;
+	int err;
+	int i;
+
+	out = kzalloc(sz, GFP_KERNEL);
+	if (!out)
+		return -ENOMEM;
+
+	err = mlx5e_port_query_pbmc(mdev, out);
+	if (err)
+		goto out;
+
+	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+		buffer = MLX5_ADDR_OF(pbmc_reg, out, buffer[i]);
+		port_buffer->buffer[i].lossy =
+			MLX5_GET(bufferx_reg, buffer, lossy);
+		port_buffer->buffer[i].epsb =
+			MLX5_GET(bufferx_reg, buffer, epsb);
+		port_buffer->buffer[i].size =
+			MLX5_GET(bufferx_reg, buffer, size) << MLX5E_BUFFER_CELL_SHIFT;
+		port_buffer->buffer[i].xon =
+			MLX5_GET(bufferx_reg, buffer, xon_threshold) << MLX5E_BUFFER_CELL_SHIFT;
+		port_buffer->buffer[i].xoff =
+			MLX5_GET(bufferx_reg, buffer, xoff_threshold) << MLX5E_BUFFER_CELL_SHIFT;
+		total_used += port_buffer->buffer[i].size;
+
+		mlx5e_dbg(HW, priv, "buffer %d: size=%d, xon=%d, xoff=%d, epsb=%d, lossy=%d\n", i,
+			  port_buffer->buffer[i].size,
+			  port_buffer->buffer[i].xon,
+			  port_buffer->buffer[i].xoff,
+			  port_buffer->buffer[i].epsb,
+			  port_buffer->buffer[i].lossy);
+	}
+
+	port_buffer->port_buffer_size =
+		MLX5_GET(pbmc_reg, out, port_buffer_size) << MLX5E_BUFFER_CELL_SHIFT;
+	port_buffer->spare_buffer_size =
+		port_buffer->port_buffer_size - total_used;
+
+	mlx5e_dbg(HW, priv, "total buffer size=%d, spare buffer size=%d\n",
+		  port_buffer->port_buffer_size,
+		  port_buffer->spare_buffer_size);
+out:
+	kfree(out);
+	return err;
+}
+
+static int port_set_buffer(struct mlx5e_priv *priv,
+			   struct mlx5e_port_buffer *port_buffer)
+{
+	struct mlx5_core_dev *mdev = priv->mdev;
+	int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
+	void *buffer;
+	void *in;
+	int err;
+	int i;
+
+	in = kzalloc(sz, GFP_KERNEL);
+	if (!in)
+		return -ENOMEM;
+
+	err = mlx5e_port_query_pbmc(mdev, in);
+	if (err)
+		goto out;
+
+	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+		buffer = MLX5_ADDR_OF(pbmc_reg, in, buffer[i]);
+
+		MLX5_SET(bufferx_reg, buffer, size,
+			 port_buffer->buffer[i].size >> MLX5E_BUFFER_CELL_SHIFT);
+		MLX5_SET(bufferx_reg, buffer, lossy,
+			 port_buffer->buffer[i].lossy);
+		MLX5_SET(bufferx_reg, buffer, xoff_threshold,
+			 port_buffer->buffer[i].xoff >> MLX5E_BUFFER_CELL_SHIFT);
+		MLX5_SET(bufferx_reg, buffer, xon_threshold,
+			 port_buffer->buffer[i].xon >> MLX5E_BUFFER_CELL_SHIFT);
+	}
+
+	err = mlx5e_port_set_pbmc(mdev, in);
+out:
+	kfree(in);
+	return err;
+}
+
+/* xoff = ((301+2.16 * len [m]) * speed [Gbps] + 2.72 MTU [B]) */
+static u32 calculate_xoff(struct mlx5e_priv *priv, unsigned int mtu)
+{
+	u32 speed;
+	u32 xoff;
+	int err;
+
+	err = mlx5e_port_linkspeed(priv->mdev, &speed);
+	if (err)
+		return 0;
+
+	xoff = (301 + 216 * priv->dcbx.cable_len / 100) * speed / 1000 + 272 * mtu / 100;
+
+	mlx5e_dbg(HW, priv, "%s: xoff=%d\n", __func__, xoff);
+	return xoff;
+}
+
+static int update_xoff_threshold(struct mlx5e_port_buffer *port_buffer,
+				 u32 xoff, unsigned int mtu)
+{
+	int i;
+
+	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+		if (port_buffer->buffer[i].lossy) {
+			port_buffer->buffer[i].xoff = 0;
+			port_buffer->buffer[i].xon  = 0;
+			continue;
+		}
+
+		if (port_buffer->buffer[i].size <
+		    (xoff + mtu + (1 << MLX5E_BUFFER_CELL_SHIFT)))
+			return -ENOMEM;
+
+		port_buffer->buffer[i].xoff = port_buffer->buffer[i].size - xoff;
+		port_buffer->buffer[i].xon  = port_buffer->buffer[i].xoff - mtu;
+	}
+
+	return 0;
+}
+
+/**
+ * update_buffer_lossy()
+ *   mtu: device's MTU
+ *   pfc_en: <input> current pfc configuration
+ *   buffer: <input> current prio to buffer mapping
+ *   xoff:   <input> xoff value
+ *   port_buffer: <output> port receive buffer configuration
+ *   change: <output>
+ *
+ *   Update buffer configuration based on pfc configuraiton and priority
+ *   to buffer mapping.
+ *   Buffer's lossy bit is changed to:
+ *     lossless if there is at least one PFC enabled priority mapped to this buffer
+ *     lossy if all priorities mapped to this buffer are PFC disabled
+ *
+ *   Return:
+ *     Return 0 if no error.
+ *     Set change to true if buffer configuration is modified.
+ */
+static int update_buffer_lossy(unsigned int mtu,
+			       u8 pfc_en, u8 *buffer, u32 xoff,
+			       struct mlx5e_port_buffer *port_buffer,
+			       bool *change)
+{
+	bool changed = false;
+	u8 lossy_count;
+	u8 prio_count;
+	u8 lossy;
+	int prio;
+	int err;
+	int i;
+
+	for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+		prio_count = 0;
+		lossy_count = 0;
+
+		for (prio = 0; prio < MLX5E_MAX_PRIORITY; prio++) {
+			if (buffer[prio] != i)
+				continue;
+
+			prio_count++;
+			lossy_count += !(pfc_en & (1 << prio));
+		}
+
+		if (lossy_count == prio_count)
+			lossy = 1;
+		else /* lossy_count < prio_count */
+			lossy = 0;
+
+		if (lossy != port_buffer->buffer[i].lossy) {
+			port_buffer->buffer[i].lossy = lossy;
+			changed = true;
+		}
+	}
+
+	if (changed) {
+		err = update_xoff_threshold(port_buffer, xoff, mtu);
+		if (err)
+			return err;
+
+		*change = true;
+	}
+
+	return 0;
+}
+
+int mlx5e_port_manual_buffer_config(struct mlx5e_priv *priv,
+				    u32 change, unsigned int mtu,
+				    struct ieee_pfc *pfc,
+				    u32 *buffer_size,
+				    u8 *prio2buffer)
+{
+	struct mlx5e_port_buffer port_buffer;
+	u32 xoff = calculate_xoff(priv, mtu);
+	bool update_prio2buffer = false;
+	u8 buffer[MLX5E_MAX_PRIORITY];
+	bool update_buffer = false;
+	u32 total_used = 0;
+	u8 curr_pfc_en;
+	int err;
+	int i;
+
+	mlx5e_dbg(HW, priv, "%s: change=%x\n", __func__, change);
+
+	err = mlx5e_port_query_buffer(priv, &port_buffer);
+	if (err)
+		return err;
+
+	if (change & MLX5E_PORT_BUFFER_CABLE_LEN) {
+		update_buffer = true;
+		err = update_xoff_threshold(&port_buffer, xoff, mtu);
+		if (err)
+			return err;
+	}
+
+	if (change & MLX5E_PORT_BUFFER_PFC) {
+		err = mlx5e_port_query_priority2buffer(priv->mdev, buffer);
+		if (err)
+			return err;
+
+		err = update_buffer_lossy(mtu, pfc->pfc_en, buffer, xoff,
+					  &port_buffer, &update_buffer);
+		if (err)
+			return err;
+	}
+
+	if (change & MLX5E_PORT_BUFFER_PRIO2BUFFER) {
+		update_prio2buffer = true;
+		err = mlx5_query_port_pfc(priv->mdev, &curr_pfc_en, NULL);
+		if (err)
+			return err;
+
+		err = update_buffer_lossy(mtu, curr_pfc_en, prio2buffer, xoff,
+					  &port_buffer, &update_buffer);
+		if (err)
+			return err;
+	}
+
+	if (change & MLX5E_PORT_BUFFER_SIZE) {
+		for (i = 0; i < MLX5E_MAX_BUFFER; i++) {
+			mlx5e_dbg(HW, priv, "%s: buffer[%d]=%d\n", __func__, i, buffer_size[i]);
+			if (!port_buffer.buffer[i].lossy && !buffer_size[i]) {
+				mlx5e_dbg(HW, priv, "%s: lossless buffer[%d] size cannot be zero\n",
+					  __func__, i);
+				return -EINVAL;
+			}
+
+			port_buffer.buffer[i].size = buffer_size[i];
+			total_used += buffer_size[i];
+		}
+
+		mlx5e_dbg(HW, priv, "%s: total buffer requested=%d\n", __func__, total_used);
+
+		if (total_used > port_buffer.port_buffer_size)
+			return -EINVAL;
+
+		update_buffer = true;
+		err = update_xoff_threshold(&port_buffer, xoff, mtu);
+		if (err)
+			return err;
+	}
+
+	/* Need to update buffer configuration if xoff value is changed */
+	if (!update_buffer && xoff != priv->dcbx.xoff) {
+		update_buffer = true;
+		err = update_xoff_threshold(&port_buffer, xoff, mtu);
+		if (err)
+			return err;
+	}
+	priv->dcbx.xoff = xoff;
+
+	/* Apply the settings */
+	if (update_buffer) {
+		err = port_set_buffer(priv, &port_buffer);
+		if (err)
+			return err;
+	}
+
+	if (update_prio2buffer)
+		err = mlx5e_port_set_priority2buffer(priv->mdev, prio2buffer);
+
+	return err;
+}