summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2010-05-22 00:36:56 -0600
committerGrant Likely <grant.likely@secretlab.ca>2010-05-22 00:36:56 -0600
commitcf9b59e9d3e008591d1f54830f570982bb307a0d (patch)
tree113478ce8fd8c832ba726ffdf59b82cb46356476 /drivers/mtd/nand
parent44504b2bebf8b5823c59484e73096a7d6574471d (diff)
parentf4b87dee923342505e1ddba8d34ce9de33e75050 (diff)
Merge remote branch 'origin' into secretlab/next-devicetree
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Diffstat (limited to 'drivers/mtd/nand')
-rw-r--r--drivers/mtd/nand/Kconfig69
-rw-r--r--drivers/mtd/nand/Makefile10
-rw-r--r--drivers/mtd/nand/alauda.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/au1550nd.c12
-rw-r--r--drivers/mtd/nand/bcm_umi_nand.c3
-rw-r--r--drivers/mtd/nand/bf5xx_nand.c29
-rw-r--r--drivers/mtd/nand/cafe_nand.c4
-rw-r--r--drivers/mtd/nand/davinci_nand.c6
-rw-r--r--drivers/mtd/nand/denali.c2134
-rw-r--r--drivers/mtd/nand/denali.h816
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c4
-rw-r--r--drivers/mtd/nand/fsl_upm.c9
-rw-r--r--drivers/mtd/nand/gpio.c12
-rw-r--r--drivers/mtd/nand/mpc5121_nfc.c917
-rw-r--r--drivers/mtd/nand/mxc_nand.c146
-rw-r--r--drivers/mtd/nand/nand_base.c387
-rw-r--r--drivers/mtd/nand/nand_bbt.c29
-rw-r--r--drivers/mtd/nand/nand_bcm_umi.h71
-rw-r--r--drivers/mtd/nand/nand_ids.c1
-rw-r--r--drivers/mtd/nand/nandsim.c17
-rw-r--r--drivers/mtd/nand/nomadik_nand.c6
-rw-r--r--drivers/mtd/nand/nuc900_nand.c (renamed from drivers/mtd/nand/w90p910_nand.c)144
-rw-r--r--drivers/mtd/nand/omap2.c16
-rw-r--r--drivers/mtd/nand/orion_nand.c21
-rw-r--r--drivers/mtd/nand/pasemi_nand.c2
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c11
-rw-r--r--drivers/mtd/nand/r852.c1140
-rw-r--r--drivers/mtd/nand/r852.h163
-rw-r--r--drivers/mtd/nand/s3c2410.c12
-rw-r--r--drivers/mtd/nand/sh_flctl.c2
-rw-r--r--drivers/mtd/nand/sm_common.c148
-rw-r--r--drivers/mtd/nand/sm_common.h61
-rw-r--r--drivers/mtd/nand/socrates_nand.c4
-rw-r--r--drivers/mtd/nand/tmio_nand.c14
-rw-r--r--drivers/mtd/nand/ts7250.c207
-rw-r--r--drivers/mtd/nand/txx9ndfmc.c2
37 files changed, 6072 insertions, 561 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 42e5ea49e975..98a04b3c9526 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -2,11 +2,23 @@ menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
select MTD_NAND_IDS
+ select MTD_NAND_ECC
help
This enables support for accessing all type of NAND flash
devices. For further information see
<http://www.linux-mtd.infradead.org/doc/nand.html>.
+config MTD_NAND_ECC
+ tristate
+
+config MTD_NAND_ECC_SMC
+ bool "NAND ECC Smart Media byte order"
+ depends on MTD_NAND_ECC
+ default n
+ help
+ Software ECC according to the Smart Media Specification.
+ The original Linux implementation had byte 0 and 1 swapped.
+
if MTD_NAND
config MTD_NAND_VERIFY_WRITE
@@ -18,12 +30,9 @@ config MTD_NAND_VERIFY_WRITE
device thinks the write was successful, a bit could have been
flipped accidentally due to device wear or something else.
-config MTD_NAND_ECC_SMC
- bool "NAND ECC Smart Media byte order"
+config MTD_SM_COMMON
+ tristate
default n
- help
- Software ECC according to the Smart Media Specification.
- The original Linux implementation had byte 0 and 1 swapped.
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
@@ -41,6 +50,23 @@ config MTD_NAND_AUTCPU12
This enables the driver for the autronix autcpu12 board to
access the SmartMediaCard.
+config MTD_NAND_DENALI
+ depends on PCI
+ tristate "Support Denali NAND controller on Intel Moorestown"
+ help
+ Enable the driver for NAND flash on Intel Moorestown, using the
+ Denali NAND controller core.
+
+config MTD_NAND_DENALI_SCRATCH_REG_ADDR
+ hex "Denali NAND size scratch register address"
+ default "0xFF108018"
+ help
+ Some platforms place the NAND chip size in a scratch register
+ because (some versions of) the driver aren't able to automatically
+ determine the size of certain chips. Set the address of the
+ scratch register here to enable this feature. On Intel Moorestown
+ boards, the scratch register is at 0xFF108018.
+
config MTD_NAND_EDB7312
tristate "Support for Cirrus Logic EBD7312 evaluation board"
depends on ARCH_EDB7312
@@ -95,15 +121,21 @@ config MTD_NAND_OMAP_PREFETCH_DMA
or in DMA interrupt mode.
Say y for DMA mode or MPU mode will be used
-config MTD_NAND_TS7250
- tristate "NAND Flash device on TS-7250 board"
- depends on MACH_TS72XX
- help
- Support for NAND flash on Technologic Systems TS-7250 platform.
-
config MTD_NAND_IDS
tristate
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable ether
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ expermental, readwrite
+ 'SmartMedia/xD new translation layer'
+
config MTD_NAND_AU1550
tristate "Au1550/1200 NAND support"
depends on SOC_AU1200 || SOC_AU1550
@@ -358,8 +390,6 @@ config MTD_NAND_ATMEL_ECC_NONE
If unsure, say N
- endchoice
-
endchoice
config MTD_NAND_PXA3xx
@@ -442,6 +472,13 @@ config MTD_NAND_FSL_UPM
Enables support for NAND Flash chips wired onto Freescale PowerPC
processor localbus with User-Programmable Machine support.
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 built-in NAND Flash Controller support"
+ depends on PPC_MPC512x
+ help
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
+
config MTD_NAND_MXC
tristate "MXC NAND support"
depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3
@@ -481,11 +518,11 @@ config MTD_NAND_SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.
-config MTD_NAND_W90P910
- tristate "Support for NAND on w90p910 evaluation board."
+config MTD_NAND_NUC900
+ tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
depends on ARCH_W90X900 && MTD_PARTITIONS
help
This enables the driver for the NAND Flash on evaluation board based
- on w90p910.
+ on w90p910 / NUC9xx.
endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 1407bd144015..e8ab884ba47b 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -2,13 +2,16 @@
# linux/drivers/nand/Makefile
#
-obj-$(CONFIG_MTD_NAND) += nand.o nand_ecc.o
+obj-$(CONFIG_MTD_NAND) += nand.o
+obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
+obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o
obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
obj-$(CONFIG_MTD_NAND_SPIA) += spia.o
obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o
+obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
@@ -19,7 +22,6 @@ obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
-obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o
obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
@@ -39,8 +41,10 @@ obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
-obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
+obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
+obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 2d6773281fd9..8691e0482ed2 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -49,7 +49,7 @@
#define TIMEOUT HZ
-static struct usb_device_id alauda_table [] = {
+static const struct usb_device_id alauda_table[] = {
{ USB_DEVICE(0x0584, 0x0008) }, /* Fujifilm DPC-R1 */
{ USB_DEVICE(0x07b4, 0x010a) }, /* Olympus MAUSB-10 */
{ }
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 524e6c9e0672..04d30887ca7f 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -474,7 +474,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
}
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, 1)) {
+ if (nand_scan_ident(mtd, 1, NULL)) {
res = -ENXIO;
goto err_scan_ident;
}
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 43d46e424040..3ffe05db4923 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -451,7 +451,7 @@ static int __init au1xxx_nand_init(void)
u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
- au1550_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+ au1550_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
if (!au1550_mtd) {
printk("Unable to allocate NAND MTD dev structure.\n");
return -ENOMEM;
@@ -460,10 +460,6 @@ static int __init au1xxx_nand_init(void)
/* Get pointer to private data */
this = (struct nand_chip *)(&au1550_mtd[1]);
- /* Initialize structures */
- memset(au1550_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
/* Link the private data with the MTD structure */
au1550_mtd->priv = this;
au1550_mtd->owner = THIS_MODULE;
@@ -544,7 +540,7 @@ static int __init au1xxx_nand_init(void)
}
nand_phys = (mem_staddr << 4) & 0xFFFC0000;
- p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
+ p_nand = ioremap(nand_phys, 0x1000);
/* make controller and MTD agree */
if (NAND_CS == 0)
@@ -589,7 +585,7 @@ static int __init au1xxx_nand_init(void)
return 0;
outio:
- iounmap((void *)p_nand);
+ iounmap(p_nand);
outmem:
kfree(au1550_mtd);
@@ -610,7 +606,7 @@ static void __exit au1550_cleanup(void)
kfree(au1550_mtd);
/* Unmap */
- iounmap((void *)p_nand);
+ iounmap(p_nand);
}
module_exit(au1550_cleanup);
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index c997f98eeb3d..dfe262c726fb 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -13,7 +13,6 @@
*****************************************************************************/
/* ---- Include Files ---------------------------------------------------- */
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
@@ -447,7 +446,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev)
* layout we'll be using.
*/
- err = nand_scan_ident(board_mtd, 1);
+ err = nand_scan_ident(board_mtd, 1, NULL);
if (err) {
printk(KERN_ERR "nand_scan failed: %d\n", err);
iounmap(bcm_umi_io_base);
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 8506e7e606fd..2974995e194d 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -68,6 +68,27 @@
#define DRV_AUTHOR "Bryan Wu <bryan.wu@analog.com>"
#define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver"
+/* NFC_STAT Masks */
+#define NBUSY 0x01 /* Not Busy */
+#define WB_FULL 0x02 /* Write Buffer Full */
+#define PG_WR_STAT 0x04 /* Page Write Pending */
+#define PG_RD_STAT 0x08 /* Page Read Pending */
+#define WB_EMPTY 0x10 /* Write Buffer Empty */
+
+/* NFC_IRQSTAT Masks */
+#define NBUSYIRQ 0x01 /* Not Busy IRQ */
+#define WB_OVF 0x02 /* Write Buffer Overflow */
+#define WB_EDGE 0x04 /* Write Buffer Edge Detect */
+#define RD_RDY 0x08 /* Read Data Ready */
+#define WR_DONE 0x10 /* Page Write Done */
+
+/* NFC_RST Masks */
+#define ECC_RST 0x01 /* ECC (and NFC counters) Reset */
+
+/* NFC_PGCTL Masks */
+#define PG_RD_START 0x01 /* Page Read Start */
+#define PG_WR_START 0x02 /* Page Write Start */
+
#ifdef CONFIG_MTD_NAND_BF5XX_HWECC
static int hardware_ecc = 1;
#else
@@ -487,7 +508,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
* transferred to generate the correct ECC register
* values.
*/
- bfin_write_NFC_RST(0x1);
+ bfin_write_NFC_RST(ECC_RST);
SSYNC();
disable_dma(CH_NFC);
@@ -497,7 +518,7 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
set_dma_config(CH_NFC, 0x0);
set_dma_start_addr(CH_NFC, (unsigned long) buf);
-/* The DMAs have different size on BF52x and BF54x */
+ /* The DMAs have different size on BF52x and BF54x */
#ifdef CONFIG_BF52x
set_dma_x_count(CH_NFC, (page_size >> 1));
set_dma_x_modify(CH_NFC, 2);
@@ -517,9 +538,9 @@ static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
/* Start PAGE read/write operation */
if (is_read)
- bfin_write_NFC_PGCTL(0x1);
+ bfin_write_NFC_PGCTL(PG_RD_START);
else
- bfin_write_NFC_PGCTL(0x2);
+ bfin_write_NFC_PGCTL(PG_WR_START);
wait_for_completion(&info->dma_completion);
}
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index e5a9f9ccea60..db1dfc5a1b11 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -762,7 +762,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe_readl(cafe, GLOBAL_CTRL), cafe_readl(cafe, GLOBAL_IRQ_MASK));
/* Scan to find existence of the device */
- if (nand_scan_ident(mtd, 2)) {
+ if (nand_scan_ident(mtd, 2, NULL)) {
err = -ENXIO;
goto out_irq;
}
@@ -849,7 +849,7 @@ static void __devexit cafe_nand_remove(struct pci_dev *pdev)
kfree(mtd);
}
-static struct pci_device_id cafe_nand_tbl[] = {
+static const struct pci_device_id cafe_nand_tbl[] = {
{ PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_88ALP01_NAND,
PCI_ANY_ID, PCI_ANY_ID },
{ }
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 76e2dc8e62f7..9c9d893affeb 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -567,8 +567,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
goto err_nomem;
}
- vaddr = ioremap(res1->start, res1->end - res1->start);
- base = ioremap(res2->start, res2->end - res2->start);
+ vaddr = ioremap(res1->start, resource_size(res1));
+ base = ioremap(res2->start, resource_size(res2));
if (!vaddr || !base) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -EINVAL;
@@ -691,7 +691,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
spin_unlock_irq(&davinci_nand_lock);
/* Scan to find existence of the device(s) */
- ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1);
+ ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
if (ret < 0) {
dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
goto err_scan;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
new file mode 100644
index 000000000000..ca03428b59cc
--- /dev/null
+++ b/drivers/mtd/nand/denali.c
@@ -0,0 +1,2134 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/mtd/mtd.h>
+#include <linux/module.h>
+
+#include "denali.h"
+
+MODULE_LICENSE("GPL");
+
+/* We define a module parameter that allows the user to override
+ * the hardware and decide what timing mode should be used.
+ */
+#define NAND_DEFAULT_TIMINGS -1
+
+static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
+module_param(onfi_timing_mode, int, S_IRUGO);
+MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting. -1 indicates"
+ " use default timings");
+
+#define DENALI_NAND_NAME "denali-nand"
+
+/* We define a macro here that combines all interrupts this driver uses into
+ * a single constant value, for convenience. */
+#define DENALI_IRQ_ALL (INTR_STATUS0__DMA_CMD_COMP | \
+ INTR_STATUS0__ECC_TRANSACTION_DONE | \
+ INTR_STATUS0__ECC_ERR | \
+ INTR_STATUS0__PROGRAM_FAIL | \
+ INTR_STATUS0__LOAD_COMP | \
+ INTR_STATUS0__PROGRAM_COMP | \
+ INTR_STATUS0__TIME_OUT | \
+ INTR_STATUS0__ERASE_FAIL | \
+ INTR_STATUS0__RST_COMP | \
+ INTR_STATUS0__ERASE_COMP)
+
+/* indicates whether or not the internal value for the flash bank is
+ valid or not */
+#define CHIP_SELECT_INVALID -1
+
+#define SUPPORT_8BITECC 1
+
+/* This macro divides two integers and rounds fractional values up
+ * to the nearest integer value. */
+#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
+
+/* this macro allows us to convert from an MTD structure to our own
+ * device context (denali) structure.
+ */
+#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
+
+/* These constants are defined by the driver to enable common driver
+ configuration options. */
+#define SPARE_ACCESS 0x41
+#define MAIN_ACCESS 0x42
+#define MAIN_SPARE_ACCESS 0x43
+
+#define DENALI_READ 0
+#define DENALI_WRITE 0x100
+
+/* types of device accesses. We can issue commands and get status */
+#define COMMAND_CYCLE 0
+#define ADDR_CYCLE 1
+#define STATUS_CYCLE 2
+
+/* this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller */
+#define BANK(x) ((x) << 24)
+
+/* List of platforms this NAND controller has be integrated into */
+static const struct pci_device_id denali_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+ { /* end: all zeroes */ }
+};
+
+
+/* these are static lookup tables that give us easy access to
+ registers in the NAND controller.
+ */
+static const uint32_t intr_status_addresses[4] = {INTR_STATUS0,
+ INTR_STATUS1,
+ INTR_STATUS2,
+ INTR_STATUS3};
+
+static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0,
+ DEVICE_RESET__BANK1,
+ DEVICE_RESET__BANK2,
+ DEVICE_RESET__BANK3};
+
+static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT,
+ INTR_STATUS1__TIME_OUT,
+ INTR_STATUS2__TIME_OUT,
+ INTR_STATUS3__TIME_OUT};
+
+static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP,
+ INTR_STATUS1__RST_COMP,
+ INTR_STATUS2__RST_COMP,
+ INTR_STATUS3__RST_COMP};
+
+/* specifies the debug level of the driver */
+static int nand_debug_level = 0;
+
+/* forward declarations */
+static void clear_interrupts(struct denali_nand_info *denali);
+static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask);
+static uint32_t read_interrupt_status(struct denali_nand_info *denali);
+
+#define DEBUG_DENALI 0
+
+/* This is a wrapper for writing to the denali registers.
+ * this allows us to create debug information so we can
+ * observe how the driver is programming the device.
+ * it uses standard linux convention for (val, addr) */
+static void denali_write32(uint32_t value, void *addr)
+{
+ iowrite32(value, addr);
+
+#if DEBUG_DENALI
+ printk(KERN_ERR "wrote: 0x%x -> 0x%x\n", value, (uint32_t)((uint32_t)addr & 0x1fff));
+#endif
+}
+
+/* Certain operations for the denali NAND controller use an indexed mode to read/write
+ data. The operation is performed by writing the address value of the command to
+ the device memory followed by the data. This function abstracts this common
+ operation.
+*/
+static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data)
+{
+ denali_write32(address, denali->flash_mem);
+ denali_write32(data, denali->flash_mem + 0x10);
+}
+
+/* Perform an indexed read of the device */
+static void index_addr_read_data(struct denali_nand_info *denali,
+ uint32_t address, uint32_t *pdata)
+{
+ denali_write32(address, denali->flash_mem);
+ *pdata = ioread32(denali->flash_mem + 0x10);
+}
+
+/* We need to buffer some data for some of the NAND core routines.
+ * The operations manage buffering that data. */
+static void reset_buf(struct denali_nand_info *denali)
+{
+ denali->buf.head = denali->buf.tail = 0;
+}
+
+static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
+{
+ BUG_ON(denali->buf.tail >= sizeof(denali->buf.buf));
+ denali->buf.buf[denali->buf.tail++] = byte;
+}
+
+/* reads the status of the device */
+static void read_status(struct denali_nand_info *denali)
+{
+ uint32_t cmd = 0x0;
+
+ /* initialize the data buffer to store status */
+ reset_buf(denali);
+
+ /* initiate a device status read */
+ cmd = MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, cmd | COMMAND_CYCLE, 0x70);
+ denali_write32(cmd | STATUS_CYCLE, denali->flash_mem);
+
+ /* update buffer with status value */
+ write_byte_to_buf(denali, ioread32(denali->flash_mem + 0x10));
+
+#if DEBUG_DENALI
+ printk("device reporting status value of 0x%2x\n", denali->buf.buf[0]);
+#endif
+}
+
+/* resets a specific device connected to the core */
+static void reset_bank(struct denali_nand_info *denali)
+{
+ uint32_t irq_status = 0;
+ uint32_t irq_mask = reset_complete[denali->flash_bank] |
+ operation_timeout[denali->flash_bank];
+ int bank = 0;
+
+ clear_interrupts(denali);
+
+ bank = device_reset_banks[denali->flash_bank];
+ denali_write32(bank, denali->flash_reg + DEVICE_RESET);
+
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status & operation_timeout[denali->flash_bank])
+ {
+ printk(KERN_ERR "reset bank failed.\n");
+ }
+}
+
+/* Reset the flash controller */
+static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali)
+{
+ uint32_t i;
+
+ nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++)
+ denali_write32(reset_complete[i] | operation_timeout[i],
+ denali->flash_reg + intr_status_addresses[i]);
+
+ for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) {
+ denali_write32(device_reset_banks[i], denali->flash_reg + DEVICE_RESET);
+ while (!(ioread32(denali->flash_reg + intr_status_addresses[i]) &
+ (reset_complete[i] | operation_timeout[i])))
+ ;
+ if (ioread32(denali->flash_reg + intr_status_addresses[i]) &
+ operation_timeout[i])
+ nand_dbg_print(NAND_DBG_WARN,
+ "NAND Reset operation timed out on bank %d\n", i);
+ }
+
+ for (i = 0; i < LLD_MAX_FLASH_BANKS; i++)
+ denali_write32(reset_complete[i] | operation_timeout[i],
+ denali->flash_reg + intr_status_addresses[i]);
+
+ return PASS;
+}
+
+/* this routine calculates the ONFI timing values for a given mode and programs
+ * the clocking register accordingly. The mode is determined by the get_onfi_nand_para
+ routine.
+ */
+static void NAND_ONFi_Timing_Mode(struct denali_nand_info *denali, uint16_t mode)
+{
+ uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
+ uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
+ uint16_t Treh[6] = {30, 15, 15, 10, 10, 7};
+ uint16_t Trc[6] = {100, 50, 35, 30, 25, 20};
+ uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15};
+ uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5};
+ uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25};
+ uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70};
+ uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100};
+ uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100};
+ uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60};
+ uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15};
+
+ uint16_t TclsRising = 1;
+ uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
+ uint16_t dv_window = 0;
+ uint16_t en_lo, en_hi;
+ uint16_t acc_clks;
+ uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
+
+ nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ en_lo = CEIL_DIV(Trp[mode], CLK_X);
+ en_hi = CEIL_DIV(Treh[mode], CLK_X);
+#if ONFI_BLOOM_TIME
+ if ((en_hi * CLK_X) < (Treh[mode] + 2))
+ en_hi++;
+#endif
+
+ if ((en_lo + en_hi) * CLK_X < Trc[mode])
+ en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
+
+ if ((en_lo + en_hi) < CLK_MULTI)
+ en_lo += CLK_MULTI - en_lo - en_hi;
+
+ while (dv_window < 8) {
+ data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
+
+ data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
+
+ data_invalid =
+ data_invalid_rhoh <
+ data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh;
+
+ dv_window = data_invalid - Trea[mode];
+
+ if (dv_window < 8)
+ en_lo++;
+ }
+
+ acc_clks = CEIL_DIV(Trea[mode], CLK_X);
+
+ while (((acc_clks * CLK_X) - Trea[mode]) < 3)
+ acc_clks++;
+
+ if ((data_invalid - acc_clks * CLK_X) < 2)
+ nand_dbg_print(NAND_DBG_WARN, "%s, Line %d: Warning!\n",
+ __FILE__, __LINE__);
+
+ addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
+ re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
+ re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
+ we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
+ cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
+ if (!TclsRising)
+ cs_cnt = CEIL_DIV(Tcs[mode], CLK_X);
+ if (cs_cnt == 0)
+ cs_cnt = 1;
+
+ if (Tcea[mode]) {
+ while (((cs_cnt * CLK_X) + Trea[mode]) < Tcea[mode])
+ cs_cnt++;
+ }
+
+#if MODE5_WORKAROUND
+ if (mode == 5)
+ acc_clks = 5;
+#endif
+
+ /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
+ if ((ioread32(denali->flash_reg + MANUFACTURER_ID) == 0) &&
+ (ioread32(denali->flash_reg + DEVICE_ID) == 0x88))
+ acc_clks = 6;
+
+ denali_write32(acc_clks, denali->flash_reg + ACC_CLKS);
+ denali_write32(re_2_we, denali->flash_reg + RE_2_WE);
+ denali_write32(re_2_re, denali->flash_reg + RE_2_RE);
+ denali_write32(we_2_re, denali->flash_reg + WE_2_RE);
+ denali_write32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
+ denali_write32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
+ denali_write32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
+ denali_write32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
+}
+
+/* configures the initial ECC settings for the controller */
+static void set_ecc_config(struct denali_nand_info *denali)
+{
+#if SUPPORT_8BITECC
+ if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) < 4096) ||
+ (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) <= 128))
+ denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+#endif
+
+ if ((ioread32(denali->flash_reg + ECC_CORRECTION) & ECC_CORRECTION__VALUE)
+ == 1) {
+ denali->dev_info.wECCBytesPerSector = 4;
+ denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
+ denali->dev_info.wNumPageSpareFlag =
+ denali->dev_info.wPageSpareSize -
+ denali->dev_info.wPageDataSize /
+ (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
+ denali->dev_info.wECCBytesPerSector
+ - denali->dev_info.wSpareSkipBytes;
+ } else {
+ denali->dev_info.wECCBytesPerSector =
+ (ioread32(denali->flash_reg + ECC_CORRECTION) &
+ ECC_CORRECTION__VALUE) * 13 / 8;
+ if ((denali->dev_info.wECCBytesPerSector) % 2 == 0)
+ denali->dev_info.wECCBytesPerSector += 2;
+ else
+ denali->dev_info.wECCBytesPerSector += 1;
+
+ denali->dev_info.wECCBytesPerSector *= denali->dev_info.wDevicesConnected;
+ denali->dev_info.wNumPageSpareFlag = denali->dev_info.wPageSpareSize -
+ denali->dev_info.wPageDataSize /
+ (ECC_SECTOR_SIZE * denali->dev_info.wDevicesConnected) *
+ denali->dev_info.wECCBytesPerSector
+ - denali->dev_info.wSpareSkipBytes;
+ }
+}
+
+/* queries the NAND device to see what ONFI modes it supports. */
+static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
+{
+ int i;
+ uint16_t blks_lun_l, blks_lun_h, n_of_luns;
+ uint32_t blockperlun, id;
+
+ denali_write32(DEVICE_RESET__BANK0, denali->flash_reg + DEVICE_RESET);
+
+ while (!((ioread32(denali->flash_reg + INTR_STATUS0) &
+ INTR_STATUS0__RST_COMP) |
+ (ioread32(denali->flash_reg + INTR_STATUS0) &
+ INTR_STATUS0__TIME_OUT)))
+ ;
+
+ if (ioread32(denali->flash_reg + INTR_STATUS0) & INTR_STATUS0__RST_COMP) {
+ denali_write32(DEVICE_RESET__BANK1, denali->flash_reg + DEVICE_RESET);
+ while (!((ioread32(denali->flash_reg + INTR_STATUS1) &
+ INTR_STATUS1__RST_COMP) |
+ (ioread32(denali->flash_reg + INTR_STATUS1) &
+ INTR_STATUS1__TIME_OUT)))
+ ;
+
+ if (ioread32(denali->flash_reg + INTR_STATUS1) &
+ INTR_STATUS1__RST_COMP) {
+ denali_write32(DEVICE_RESET__BANK2,
+ denali->flash_reg + DEVICE_RESET);
+ while (!((ioread32(denali->flash_reg + INTR_STATUS2) &
+ INTR_STATUS2__RST_COMP) |
+ (ioread32(denali->flash_reg + INTR_STATUS2) &
+ INTR_STATUS2__TIME_OUT)))
+ ;
+
+ if (ioread32(denali->flash_reg + INTR_STATUS2) &
+ INTR_STATUS2__RST_COMP) {
+ denali_write32(DEVICE_RESET__BANK3,
+ denali->flash_reg + DEVICE_RESET);
+ while (!((ioread32(denali->flash_reg + INTR_STATUS3) &
+ INTR_STATUS3__RST_COMP) |
+ (ioread32(denali->flash_reg + INTR_STATUS3) &
+ INTR_STATUS3__TIME_OUT)))
+ ;
+ } else {
+ printk(KERN_ERR "Getting a time out for bank 2!\n");
+ }
+ } else {
+ printk(KERN_ERR "Getting a time out for bank 1!\n");
+ }
+ }
+
+ denali_write32(INTR_STATUS0__TIME_OUT, denali->flash_reg + INTR_STATUS0);
+ denali_write32(INTR_STATUS1__TIME_OUT, denali->flash_reg + INTR_STATUS1);
+ denali_write32(INTR_STATUS2__TIME_OUT, denali->flash_reg + INTR_STATUS2);
+ denali_write32(INTR_STATUS3__TIME_OUT, denali->flash_reg + INTR_STATUS3);
+
+ denali->dev_info.wONFIDevFeatures =
+ ioread32(denali->flash_reg + ONFI_DEVICE_FEATURES);
+ denali->dev_info.wONFIOptCommands =
+ ioread32(denali->flash_reg + ONFI_OPTIONAL_COMMANDS);
+ denali->dev_info.wONFITimingMode =
+ ioread32(denali->flash_reg + ONFI_TIMING_MODE);
+ denali->dev_info.wONFIPgmCacheTimingMode =
+ ioread32(denali->flash_reg + ONFI_PGM_CACHE_TIMING_MODE);
+
+ n_of_luns = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
+ ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS;
+ blks_lun_l = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L);
+ blks_lun_h = ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U);
+
+ blockperlun = (blks_lun_h << 16) | blks_lun_l;
+
+ denali->dev_info.wTotalBlocks = n_of_luns * blockperlun;
+
+ if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+ ONFI_TIMING_MODE__VALUE))
+ return FAIL;
+
+ for (i = 5; i > 0; i--) {
+ if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) & (0x01 << i))
+ break;
+ }
+
+ NAND_ONFi_Timing_Mode(denali, i);
+
+ index_addr(denali, MODE_11 | 0, 0x90);
+ index_addr(denali, MODE_11 | 1, 0);
+
+ for (i = 0; i < 3; i++)
+ index_addr_read_data(denali, MODE_11 | 2, &id);
+
+ nand_dbg_print(NAND_DBG_DEBUG, "3rd ID: 0x%x\n", id);
+
+ denali->dev_info.MLCDevice = id & 0x0C;
+
+ /* By now, all the ONFI devices we know support the page cache */
+ /* rw feature. So here we enable the pipeline_rw_ahead feature */
+ /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
+ /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */
+
+ return PASS;
+}
+
+static void get_samsung_nand_para(struct denali_nand_info *denali)
+{
+ uint8_t no_of_planes;
+ uint32_t blk_size;
+ uint64_t plane_size, capacity;
+ uint32_t id_bytes[5];
+ int i;
+
+ index_addr(denali, (uint32_t)(MODE_11 | 0), 0x90);
+ index_addr(denali, (uint32_t)(MODE_11 | 1), 0);
+ for (i = 0; i < 5; i++)
+ index_addr_read_data(denali, (uint32_t)(MODE_11 | 2), &id_bytes[i]);
+
+ nand_dbg_print(NAND_DBG_DEBUG,
+ "ID bytes: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
+ id_bytes[0], id_bytes[1], id_bytes[2],
+ id_bytes[3], id_bytes[4]);
+
+ if ((id_bytes[1] & 0xff) == 0xd3) { /* Samsung K9WAG08U1A */
+ /* Set timing register values according to datasheet */
+ denali_write32(5, denali->flash_reg + ACC_CLKS);
+ denali_write32(20, denali->flash_reg + RE_2_WE);
+ denali_write32(12, denali->flash_reg + WE_2_RE);
+ denali_write32(14, denali->flash_reg + ADDR_2_DATA);
+ denali_write32(3, denali->flash_reg + RDWR_EN_LO_CNT);
+ denali_write32(2, denali->flash_reg + RDWR_EN_HI_CNT);
+ denali_write32(2, denali->flash_reg + CS_SETUP_CNT);
+ }
+
+ no_of_planes = 1 << ((id_bytes[4] & 0x0c) >> 2);
+ plane_size = (uint64_t)64 << ((id_bytes[4] & 0x70) >> 4);
+ blk_size = 64 << ((ioread32(denali->flash_reg + DEVICE_PARAM_1) & 0x30) >> 4);
+ capacity = (uint64_t)128 * plane_size * no_of_planes;
+
+ do_div(capacity, blk_size);
+ denali->dev_info.wTotalBlocks = capacity;
+}
+
+static void get_toshiba_nand_para(struct denali_nand_info *denali)
+{
+ void __iomem *scratch_reg;
+ uint32_t tmp;
+
+ /* Workaround to fix a controller bug which reports a wrong */
+ /* spare area size for some kind of Toshiba NAND device */
+ if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
+ (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
+ denali_write32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
+ ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ denali_write32(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+#if SUPPORT_15BITECC
+ denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+ denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+#endif
+ }
+
+ /* As Toshiba NAND can not provide it's block number, */
+ /* so here we need user to provide the correct block */
+ /* number in a scratch register before the Linux NAND */
+ /* driver is loaded. If no valid value found in the scratch */
+ /* register, then we use default block number value */
+ scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
+ if (!scratch_reg) {
+ printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
+ __FILE__, __LINE__);
+ denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ } else {
+ nand_dbg_print(NAND_DBG_WARN,
+ "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
+ denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
+ if (denali->dev_info.wTotalBlocks < 512)
+ denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ iounmap(scratch_reg);
+ }
+}
+
+static void get_hynix_nand_para(struct denali_nand_info *denali)
+{
+ void __iomem *scratch_reg;
+ uint32_t main_size, spare_size;
+
+ switch (denali->dev_info.wDeviceID) {
+ case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
+ case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
+ denali_write32(128, denali->flash_reg + PAGES_PER_BLOCK);
+ denali_write32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ denali_write32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ main_size = 4096 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ spare_size = 224 * ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali_write32(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+ denali_write32(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ denali_write32(0, denali->flash_reg + DEVICE_WIDTH);
+#if SUPPORT_15BITECC
+ denali_write32(15, denali->flash_reg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+ denali_write32(8, denali->flash_reg + ECC_CORRECTION);
+#endif
+ denali->dev_info.MLCDevice = 1;
+ break;
+ default:
+ nand_dbg_print(NAND_DBG_WARN,
+ "Spectra: Unknown Hynix NAND (Device ID: 0x%x)."
+ "Will use default parameter values instead.\n",
+ denali->dev_info.wDeviceID);
+ }
+
+ scratch_reg = ioremap_nocache(SCRATCH_REG_ADDR, SCRATCH_REG_SIZE);
+ if (!scratch_reg) {
+ printk(KERN_ERR "Spectra: ioremap failed in %s, Line %d",
+ __FILE__, __LINE__);
+ denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ } else {
+ nand_dbg_print(NAND_DBG_WARN,
+ "Spectra: ioremap reg address: 0x%p\n", scratch_reg);
+ denali->dev_info.wTotalBlocks = 1 << ioread8(scratch_reg);
+ if (denali->dev_info.wTotalBlocks < 512)
+ denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ iounmap(scratch_reg);
+ }
+}
+
+/* determines how many NAND chips are connected to the controller. Note for
+ Intel CE4100 devices we don't support more than one device.
+ */
+static void find_valid_banks(struct denali_nand_info *denali)
+{
+ uint32_t id[LLD_MAX_FLASH_BANKS];
+ int i;
+
+ denali->total_used_banks = 1;
+ for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) {
+ index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90);
+ index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0);
+ index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]);
+
+ nand_dbg_print(NAND_DBG_DEBUG,
+ "Return 1st ID for bank[%d]: %x\n", i, id[i]);
+
+ if (i == 0) {
+ if (!(id[i] & 0x0ff))
+ break; /* WTF? */
+ } else {
+ if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
+ denali->total_used_banks++;
+ else
+ break;
+ }
+ }
+
+ if (denali->platform == INTEL_CE4100)
+ {
+ /* Platform limitations of the CE4100 device limit
+ * users to a single chip solution for NAND.
+ * Multichip support is not enabled.
+ */
+ if (denali->total_used_banks != 1)
+ {
+ printk(KERN_ERR "Sorry, Intel CE4100 only supports "
+ "a single NAND device.\n");
+ BUG();
+ }
+ }
+ nand_dbg_print(NAND_DBG_DEBUG,
+ "denali->total_used_banks: %d\n", denali->total_used_banks);
+}
+
+static void detect_partition_feature(struct denali_nand_info *denali)
+{
+ if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
+ if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) &
+ PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) {
+ denali->dev_info.wSpectraStartBlock =
+ ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
+ MIN_MAX_BANK_1__MIN_VALUE) *
+ denali->dev_info.wTotalBlocks)
+ +
+ (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) &
+ MIN_BLK_ADDR_1__VALUE);
+
+ denali->dev_info.wSpectraEndBlock =
+ (((ioread32(denali->flash_reg + MIN_MAX_BANK_1) &
+ MIN_MAX_BANK_1__MAX_VALUE) >> 2) *
+ denali->dev_info.wTotalBlocks)
+ +
+ (ioread32(denali->flash_reg + MAX_BLK_ADDR_1) &
+ MAX_BLK_ADDR_1__VALUE);
+
+ denali->dev_info.wTotalBlocks *= denali->total_used_banks;
+
+ if (denali->dev_info.wSpectraEndBlock >=
+ denali->dev_info.wTotalBlocks) {
+ denali->dev_info.wSpectraEndBlock =
+ denali->dev_info.wTotalBlocks - 1;
+ }
+
+ denali->dev_info.wDataBlockNum =
+ denali->dev_info.wSpectraEndBlock -
+ denali->dev_info.wSpectraStartBlock + 1;
+ } else {
+ denali->dev_info.wTotalBlocks *= denali->total_used_banks;
+ denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
+ denali->dev_info.wSpectraEndBlock =
+ denali->dev_info.wTotalBlocks - 1;
+ denali->dev_info.wDataBlockNum =
+ denali->dev_info.wSpectraEndBlock -
+ denali->dev_info.wSpectraStartBlock + 1;
+ }
+ } else {
+ denali->dev_info.wTotalBlocks *= denali->total_used_banks;
+ denali->dev_info.wSpectraStartBlock = SPECTRA_START_BLOCK;
+ denali->dev_info.wSpectraEndBlock = denali->dev_info.wTotalBlocks - 1;
+ denali->dev_info.wDataBlockNum =
+ denali->dev_info.wSpectraEndBlock -
+ denali->dev_info.wSpectraStartBlock + 1;
+ }
+}
+
+static void dump_device_info(struct denali_nand_info *denali)
+{
+ nand_dbg_print(NAND_DBG_DEBUG, "denali->dev_info:\n");
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceMaker: 0x%x\n",
+ denali->dev_info.wDeviceMaker);
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceID: 0x%x\n",
+ denali->dev_info.wDeviceID);
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceType: 0x%x\n",
+ denali->dev_info.wDeviceType);
+ nand_dbg_print(NAND_DBG_DEBUG, "SpectraStartBlock: %d\n",
+ denali->dev_info.wSpectraStartBlock);
+ nand_dbg_print(NAND_DBG_DEBUG, "SpectraEndBlock: %d\n",
+ denali->dev_info.wSpectraEndBlock);
+ nand_dbg_print(NAND_DBG_DEBUG, "TotalBlocks: %d\n",
+ denali->dev_info.wTotalBlocks);
+ nand_dbg_print(NAND_DBG_DEBUG, "PagesPerBlock: %d\n",
+ denali->dev_info.wPagesPerBlock);
+ nand_dbg_print(NAND_DBG_DEBUG, "PageSize: %d\n",
+ denali->dev_info.wPageSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "PageDataSize: %d\n",
+ denali->dev_info.wPageDataSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "PageSpareSize: %d\n",
+ denali->dev_info.wPageSpareSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "NumPageSpareFlag: %d\n",
+ denali->dev_info.wNumPageSpareFlag);
+ nand_dbg_print(NAND_DBG_DEBUG, "ECCBytesPerSector: %d\n",
+ denali->dev_info.wECCBytesPerSector);
+ nand_dbg_print(NAND_DBG_DEBUG, "BlockSize: %d\n",
+ denali->dev_info.wBlockSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "BlockDataSize: %d\n",
+ denali->dev_info.wBlockDataSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "DataBlockNum: %d\n",
+ denali->dev_info.wDataBlockNum);
+ nand_dbg_print(NAND_DBG_DEBUG, "PlaneNum: %d\n",
+ denali->dev_info.bPlaneNum);
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceMainAreaSize: %d\n",
+ denali->dev_info.wDeviceMainAreaSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceSpareAreaSize: %d\n",
+ denali->dev_info.wDeviceSpareAreaSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "DevicesConnected: %d\n",
+ denali->dev_info.wDevicesConnected);
+ nand_dbg_print(NAND_DBG_DEBUG, "DeviceWidth: %d\n",
+ denali->dev_info.wDeviceWidth);
+ nand_dbg_print(NAND_DBG_DEBUG, "HWRevision: 0x%x\n",
+ denali->dev_info.wHWRevision);
+ nand_dbg_print(NAND_DBG_DEBUG, "HWFeatures: 0x%x\n",
+ denali->dev_info.wHWFeatures);
+ nand_dbg_print(NAND_DBG_DEBUG, "ONFIDevFeatures: 0x%x\n",
+ denali->dev_info.wONFIDevFeatures);
+ nand_dbg_print(NAND_DBG_DEBUG, "ONFIOptCommands: 0x%x\n",
+ denali->dev_info.wONFIOptCommands);
+ nand_dbg_print(NAND_DBG_DEBUG, "ONFITimingMode: 0x%x\n",
+ denali->dev_info.wONFITimingMode);
+ nand_dbg_print(NAND_DBG_DEBUG, "ONFIPgmCacheTimingMode: 0x%x\n",
+ denali->dev_info.wONFIPgmCacheTimingMode);
+ nand_dbg_print(NAND_DBG_DEBUG, "MLCDevice: %s\n",
+ denali->dev_info.MLCDevice ? "Yes" : "No");
+ nand_dbg_print(NAND_DBG_DEBUG, "SpareSkipBytes: %d\n",
+ denali->dev_info.wSpareSkipBytes);
+ nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageNumber: %d\n",
+ denali->dev_info.nBitsInPageNumber);
+ nand_dbg_print(NAND_DBG_DEBUG, "BitsInPageDataSize: %d\n",
+ denali->dev_info.nBitsInPageDataSize);
+ nand_dbg_print(NAND_DBG_DEBUG, "BitsInBlockDataSize: %d\n",
+ denali->dev_info.nBitsInBlockDataSize);
+}
+
+static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali)
+{
+ uint16_t status = PASS;
+ uint8_t no_of_planes;
+
+ nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ denali->dev_info.wDeviceMaker = ioread32(denali->flash_reg + MANUFACTURER_ID);
+ denali->dev_info.wDeviceID = ioread32(denali->flash_reg + DEVICE_ID);
+ denali->dev_info.bDeviceParam0 = ioread32(denali->flash_reg + DEVICE_PARAM_0);
+ denali->dev_info.bDeviceParam1 = ioread32(denali->flash_reg + DEVICE_PARAM_1);
+ denali->dev_info.bDeviceParam2 = ioread32(denali->flash_reg + DEVICE_PARAM_2);
+
+ denali->dev_info.MLCDevice = ioread32(denali->flash_reg + DEVICE_PARAM_0) & 0x0c;
+
+ if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
+ ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
+ if (FAIL == get_onfi_nand_para(denali))
+ return FAIL;
+ } else if (denali->dev_info.wDeviceMaker == 0xEC) { /* Samsung NAND */
+ get_samsung_nand_para(denali);
+ } else if (denali->dev_info.wDeviceMaker == 0x98) { /* Toshiba NAND */
+ get_toshiba_nand_para(denali);
+ } else if (denali->dev_info.wDeviceMaker == 0xAD) { /* Hynix NAND */
+ get_hynix_nand_para(denali);
+ } else {
+ denali->dev_info.wTotalBlocks = GLOB_HWCTL_DEFAULT_BLKS;
+ }
+
+ nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
+ "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
+ "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+ "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
+ ioread32(denali->flash_reg + ACC_CLKS),
+ ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + WE_2_RE),
+ ioread32(denali->flash_reg + ADDR_2_DATA),
+ ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
+ ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
+ ioread32(denali->flash_reg + CS_SETUP_CNT));
+
+ denali->dev_info.wHWRevision = ioread32(denali->flash_reg + REVISION);
+ denali->dev_info.wHWFeatures = ioread32(denali->flash_reg + FEATURES);
+
+ denali->dev_info.wDeviceMainAreaSize =
+ ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ denali->dev_info.wDeviceSpareAreaSize =
+ ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+
+ denali->dev_info.wPageDataSize =
+ ioread32(denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+
+ /* Note: When using the Micon 4K NAND device, the controller will report
+ * Page Spare Size as 216 bytes. But Micron's Spec say it's 218 bytes.
+ * And if force set it to 218 bytes, the controller can not work
+ * correctly. So just let it be. But keep in mind that this bug may
+ * cause
+ * other problems in future. - Yunpeng 2008-10-10
+ */
+ denali->dev_info.wPageSpareSize =
+ ioread32(denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+
+ denali->dev_info.wPagesPerBlock = ioread32(denali->flash_reg + PAGES_PER_BLOCK);
+
+ denali->dev_info.wPageSize =
+ denali->dev_info.wPageDataSize + denali->dev_info.wPageSpareSize;
+ denali->dev_info.wBlockSize =
+ denali->dev_info.wPageSize * denali->dev_info.wPagesPerBlock;
+ denali->dev_info.wBlockDataSize =
+ denali->dev_info.wPagesPerBlock * denali->dev_info.wPageDataSize;
+
+ denali->dev_info.wDeviceWidth = ioread32(denali->flash_reg + DEVICE_WIDTH);
+ denali->dev_info.wDeviceType =
+ ((ioread32(denali->flash_reg + DEVICE_WIDTH) > 0) ? 16 : 8);
+
+ denali->dev_info.wDevicesConnected = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+
+ denali->dev_info.wSpareSkipBytes =
+ ioread32(denali->flash_reg + SPARE_AREA_SKIP_BYTES) *
+ denali->dev_info.wDevicesConnected;
+
+ denali->dev_info.nBitsInPageNumber =
+ ilog2(denali->dev_info.wPagesPerBlock);
+ denali->dev_info.nBitsInPageDataSize =
+ ilog2(denali->dev_info.wPageDataSize);
+ denali->dev_info.nBitsInBlockDataSize =
+ ilog2(denali->dev_info.wBlockDataSize);
+
+ set_ecc_config(denali);
+
+ no_of_planes = ioread32(denali->flash_reg + NUMBER_OF_PLANES) &
+ NUMBER_OF_PLANES__VALUE;
+
+ switch (no_of_planes) {
+ case 0:
+ case 1:
+ case 3:
+ case 7:
+ denali->dev_info.bPlaneNum = no_of_planes + 1;
+ break;
+ default:
+ status = FAIL;
+ break;
+ }
+
+ find_valid_banks(denali);
+
+ detect_partition_feature(denali);
+
+ dump_device_info(denali);
+
+ /* If the user specified to override the default timings
+ * with a specific ONFI mode, we apply those changes here.
+ */
+ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
+ {
+ NAND_ONFi_Timing_Mode(denali, onfi_timing_mode);
+ }
+
+ return status;
+}
+
+static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali,
+ uint16_t INT_ENABLE)
+{
+ nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ if (INT_ENABLE)
+ denali_write32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
+ else
+ denali_write32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
+}
+
+/* validation function to verify that the controlling software is making
+ a valid request
+ */
+static inline bool is_flash_bank_valid(int flash_bank)
+{
+ return (flash_bank >= 0 && flash_bank < 4);
+}
+
+static void denali_irq_init(struct denali_nand_info *denali)
+{
+ uint32_t int_mask = 0;
+
+ /* Disable global interrupts */
+ NAND_LLD_Enable_Disable_Interrupts(denali, false);
+
+ int_mask = DENALI_IRQ_ALL;
+
+ /* Clear all status bits */
+ denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS0);
+ denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS1);
+ denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS2);
+ denali_write32(0xFFFF, denali->flash_reg + INTR_STATUS3);
+
+ denali_irq_enable(denali, int_mask);
+}
+
+static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
+{
+ NAND_LLD_Enable_Disable_Interrupts(denali, false);
+ free_irq(irqnum, denali);
+}
+
+static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask)
+{
+ denali_write32(int_mask, denali->flash_reg + INTR_EN0);
+ denali_write32(int_mask, denali->flash_reg + INTR_EN1);
+ denali_write32(int_mask, denali->flash_reg + INTR_EN2);
+ denali_write32(int_mask, denali->flash_reg + INTR_EN3);
+}
+
+/* This function only returns when an interrupt that this driver cares about
+ * occurs. This is to reduce the overhead of servicing interrupts
+ */
+static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
+{
+ return (read_interrupt_status(denali) & DENALI_IRQ_ALL);
+}
+
+/* Interrupts are cleared by writing a 1 to the appropriate status bit */
+static inline void clear_interrupt(struct denali_nand_info *denali, uint32_t irq_mask)
+{
+ uint32_t intr_status_reg = 0;
+
+ intr_status_reg = intr_status_addresses[denali->flash_bank];
+
+ denali_write32(irq_mask, denali->flash_reg + intr_status_reg);
+}
+
+static void clear_interrupts(struct denali_nand_info *denali)
+{
+ uint32_t status = 0x0;
+ spin_lock_irq(&denali->irq_lock);
+
+ status = read_interrupt_status(denali);
+
+#if DEBUG_DENALI
+ denali->irq_debug_array[denali->idx++] = 0x30000000 | status;
+ denali->idx %= 32;
+#endif
+
+ denali->irq_status = 0x0;
+ spin_unlock_irq(&denali->irq_lock);
+}
+
+static uint32_t read_interrupt_status(struct denali_nand_info *denali)
+{
+ uint32_t intr_status_reg = 0;
+
+ intr_status_reg = intr_status_addresses[denali->flash_bank];
+
+ return ioread32(denali->flash_reg + intr_status_reg);
+}
+
+#if DEBUG_DENALI
+static void print_irq_log(struct denali_nand_info *denali)
+{
+ int i = 0;
+
+ printk("ISR debug log index = %X\n", denali->idx);
+ for (i = 0; i < 32; i++)
+ {
+ printk("%08X: %08X\n", i, denali->irq_debug_array[i]);
+ }
+}
+#endif
+
+/* This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared
+ * interrupt.
+ */
+static irqreturn_t denali_isr(int irq, void *dev_id)
+{
+ struct denali_nand_info *denali = dev_id;
+ uint32_t irq_status = 0x0;
+ irqreturn_t result = IRQ_NONE;
+
+ spin_lock(&denali->irq_lock);
+
+ /* check to see if a valid NAND chip has
+ * been selected.
+ */
+ if (is_flash_bank_valid(denali->flash_bank))
+ {
+ /* check to see if controller generated
+ * the interrupt, since this is a shared interrupt */
+ if ((irq_status = denali_irq_detected(denali)) != 0)
+ {
+#if DEBUG_DENALI
+ denali->irq_debug_array[denali->idx++] = 0x10000000 | irq_status;
+ denali->idx %= 32;
+
+ printk("IRQ status = 0x%04x\n", irq_status);
+#endif
+ /* handle interrupt */
+ /* first acknowledge it */
+ clear_interrupt(denali, irq_status);
+ /* store the status in the device context for someone
+ to read */
+ denali->irq_status |= irq_status;
+ /* notify anyone who cares that it happened */
+ complete(&denali->complete);
+ /* tell the OS that we've handled this */
+ result = IRQ_HANDLED;
+ }
+ }
+ spin_unlock(&denali->irq_lock);
+ return result;
+}
+#define BANK(x) ((x) << 24)
+
+static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
+{
+ unsigned long comp_res = 0;
+ uint32_t intr_status = 0;
+ bool retry = false;
+ unsigned long timeout = msecs_to_jiffies(1000);
+
+ do
+ {
+#if DEBUG_DENALI
+ printk("waiting for 0x%x\n", irq_mask);
+#endif
+ comp_res = wait_for_completion_timeout(&denali->complete, timeout);
+ spin_lock_irq(&denali->irq_lock);
+ intr_status = denali->irq_status;
+
+#if DEBUG_DENALI
+ denali->irq_debug_array[denali->idx++] = 0x20000000 | (irq_mask << 16) | intr_status;
+ denali->idx %= 32;
+#endif
+
+ if (intr_status & irq_mask)
+ {
+ denali->irq_status &= ~irq_mask;
+ spin_unlock_irq(&denali->irq_lock);
+#if DEBUG_DENALI
+ if (retry) printk("status on retry = 0x%x\n", intr_status);
+#endif
+ /* our interrupt was detected */
+ break;
+ }
+ else
+ {
+ /* these are not the interrupts you are looking for -
+ need to wait again */
+ spin_unlock_irq(&denali->irq_lock);
+#if DEBUG_DENALI
+ print_irq_log(denali);
+ printk("received irq nobody cared: irq_status = 0x%x,"
+ " irq_mask = 0x%x, timeout = %ld\n", intr_status, irq_mask, comp_res);
+#endif
+ retry = true;
+ }
+ } while (comp_res != 0);
+
+ if (comp_res == 0)
+ {
+ /* timeout */
+ printk(KERN_ERR "timeout occurred, status = 0x%x, mask = 0x%x\n",
+ intr_status, irq_mask);
+
+ intr_status = 0;
+ }
+ return intr_status;
+}
+
+/* This helper function setups the registers for ECC and whether or not
+ the spare area will be transfered. */
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
+ bool transfer_spare)
+{
+ int ecc_en_flag = 0, transfer_spare_flag = 0;
+
+ /* set ECC, transfer spare bits if needed */
+ ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
+ transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
+
+ /* Enable spare area/ECC per user's request. */
+ denali_write32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
+ denali_write32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+}
+
+/* sends a pipeline command operation to the controller. See the Denali NAND
+ controller's user guide for more information (section 4.2.3.6).
+ */
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali, bool ecc_en,
+ bool transfer_spare, int access_type,
+ int op)
+{
+ int status = PASS;
+ uint32_t addr = 0x0, cmd = 0x0, page_count = 1, irq_status = 0,
+ irq_mask = 0;
+
+ if (op == DENALI_READ) irq_mask = INTR_STATUS0__LOAD_COMP;
+ else if (op == DENALI_WRITE) irq_mask = 0;
+ else BUG();
+
+ setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
+
+#if DEBUG_DENALI
+ spin_lock_irq(&denali->irq_lock);
+ denali->irq_debug_array[denali->idx++] = 0x40000000 | ioread32(denali->flash_reg + ECC_ENABLE) | (access_type << 4);
+ denali->idx %= 32;
+ spin_unlock_irq(&denali->irq_lock);
+#endif
+
+
+ /* clear interrupts */
+ clear_interrupts(denali);
+
+ addr = BANK(denali->flash_bank) | denali->page;
+
+ if (op == DENALI_WRITE && access_type != SPARE_ACCESS)
+ {
+ cmd = MODE_01 | addr;
+ denali_write32(cmd, denali->flash_mem);
+ }
+ else if (op == DENALI_WRITE && access_type == SPARE_ACCESS)
+ {
+ /* read spare area */
+ cmd = MODE_10 | addr;
+ index_addr(denali, (uint32_t)cmd, access_type);
+
+ cmd = MODE_01 | addr;
+ denali_write32(cmd, denali->flash_mem);
+ }
+ else if (op == DENALI_READ)
+ {
+ /* setup page read request for access type */
+ cmd = MODE_10 | addr;
+ index_addr(denali, (uint32_t)cmd, access_type);
+
+ /* page 33 of the NAND controller spec indicates we should not
+ use the pipeline commands in Spare area only mode. So we
+ don't.
+ */
+ if (access_type == SPARE_ACCESS)
+ {
+ cmd = MODE_01 | addr;
+ denali_write32(cmd, denali->flash_mem);
+ }
+ else
+ {
+ index_addr(denali, (uint32_t)cmd, 0x2000 | op | page_count);
+
+ /* wait for command to be accepted
+ * can always use status0 bit as the mask is identical for each
+ * bank. */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0)
+ {
+ printk(KERN_ERR "cmd, page, addr on timeout "
+ "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr);
+ status = FAIL;
+ }
+ else
+ {
+ cmd = MODE_01 | addr;
+ denali_write32(cmd, denali->flash_mem);
+ }
+ }
+ }
+ return status;
+}
+
+/* helper function that simply writes a buffer to the flash */
+static int write_data_to_flash_mem(struct denali_nand_info *denali, const uint8_t *buf,
+ int len)
+{
+ uint32_t i = 0, *buf32;
+
+ /* verify that the len is a multiple of 4. see comment in
+ * read_data_from_flash_mem() */
+ BUG_ON((len % 4) != 0);
+
+ /* write the data to the flash memory */
+ buf32 = (uint32_t *)buf;
+ for (i = 0; i < len / 4; i++)
+ {
+ denali_write32(*buf32++, denali->flash_mem + 0x10);
+ }
+ return i*4; /* intent is to return the number of bytes read */
+}
+
+/* helper function that simply reads a buffer from the flash */
+static int read_data_from_flash_mem(struct denali_nand_info *denali, uint8_t *buf,
+ int len)
+{
+ uint32_t i = 0, *buf32;
+
+ /* we assume that len will be a multiple of 4, if not
+ * it would be nice to know about it ASAP rather than
+ * have random failures...
+ *
+ * This assumption is based on the fact that this
+ * function is designed to be used to read flash pages,
+ * which are typically multiples of 4...
+ */
+
+ BUG_ON((len % 4) != 0);
+
+ /* transfer the data from the flash */
+ buf32 = (uint32_t *)buf;
+ for (i = 0; i < len / 4; i++)
+ {
+ *buf32++ = ioread32(denali->flash_mem + 0x10);
+ }
+ return i*4; /* intent is to return the number of bytes read */
+}
+
+/* writes OOB data to the device */
+static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_status = 0;
+ uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP |
+ INTR_STATUS0__PROGRAM_FAIL;
+ int status = 0;
+
+ denali->page = page;
+
+ if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+ DENALI_WRITE) == PASS)
+ {
+ write_data_to_flash_mem(denali, buf, mtd->oobsize);
+
+#if DEBUG_DENALI
+ spin_lock_irq(&denali->irq_lock);
+ denali->irq_debug_array[denali->idx++] = 0x80000000 | mtd->oobsize;
+ denali->idx %= 32;
+ spin_unlock_irq(&denali->irq_lock);
+#endif
+
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0)
+ {
+ printk(KERN_ERR "OOB write failed\n");
+ status = -EIO;
+ }
+ }
+ else
+ {
+ printk(KERN_ERR "unable to send pipeline command\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+/* reads OOB data from the device */
+static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0;
+
+ denali->page = page;
+
+#if DEBUG_DENALI
+ printk("read_oob %d\n", page);
+#endif
+ if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+ DENALI_READ) == PASS)
+ {
+ read_data_from_flash_mem(denali, buf, mtd->oobsize);
+
+ /* wait for command to be accepted
+ * can always use status0 bit as the mask is identical for each
+ * bank. */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0)
+ {
+ printk(KERN_ERR "page on OOB timeout %d\n", denali->page);
+ }
+
+ /* We set the device back to MAIN_ACCESS here as I observed
+ * instability with the controller if you do a block erase
+ * and the last transaction was a SPARE_ACCESS. Block erase
+ * is reliable (according to the MTD test infrastructure)
+ * if you are in MAIN_ACCESS.
+ */
+ addr = BANK(denali->flash_bank) | denali->page;
+ cmd = MODE_10 | addr;
+ index_addr(denali, (uint32_t)cmd, MAIN_ACCESS);
+
+#if DEBUG_DENALI
+ spin_lock_irq(&denali->irq_lock);
+ denali->irq_debug_array[denali->idx++] = 0x60000000 | mtd->oobsize;
+ denali->idx %= 32;
+ spin_unlock_irq(&denali->irq_lock);
+#endif
+ }
+}
+
+/* this function examines buffers to see if they contain data that
+ * indicate that the buffer is part of an erased region of flash.
+ */
+bool is_erased(uint8_t *buf, int len)
+{
+ int i = 0;
+ for (i = 0; i < len; i++)
+ {
+ if (buf[i] != 0xFF)
+ {
+ return false;
+ }
+ }
+ return true;
+}
+#define ECC_SECTOR_SIZE 512
+
+#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
+#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
+#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO))
+#define ECC_ERR_DEVICE(x) ((x) & ERR_CORRECTION_INFO__DEVICE_NR >> 8)
+#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
+
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
+ uint8_t *oobbuf, uint32_t irq_status)
+{
+ bool check_erased_page = false;
+
+ if (irq_status & INTR_STATUS0__ECC_ERR)
+ {
+ /* read the ECC errors. we'll ignore them for now */
+ uint32_t err_address = 0, err_correction_info = 0;
+ uint32_t err_byte = 0, err_sector = 0, err_device = 0;
+ uint32_t err_correction_value = 0;
+
+ do
+ {
+ err_address = ioread32(denali->flash_reg +
+ ECC_ERROR_ADDRESS);
+ err_sector = ECC_SECTOR(err_address);
+ err_byte = ECC_BYTE(err_address);
+
+
+ err_correction_info = ioread32(denali->flash_reg +
+ ERR_CORRECTION_INFO);
+ err_correction_value =
+ ECC_CORRECTION_VALUE(err_correction_info);
+ err_device = ECC_ERR_DEVICE(err_correction_info);
+
+ if (ECC_ERROR_CORRECTABLE(err_correction_info))
+ {
+ /* offset in our buffer is computed as:
+ sector number * sector size + offset in
+ sector
+ */
+ int offset = err_sector * ECC_SECTOR_SIZE +
+ err_byte;
+ if (offset < denali->mtd.writesize)
+ {
+ /* correct the ECC error */
+ buf[offset] ^= err_correction_value;
+ denali->mtd.ecc_stats.corrected++;
+ }
+ else
+ {
+ /* bummer, couldn't correct the error */
+ printk(KERN_ERR "ECC offset invalid\n");
+ denali->mtd.ecc_stats.failed++;
+ }
+ }
+ else
+ {
+ /* if the error is not correctable, need to
+ * look at the page to see if it is an erased page.
+ * if so, then it's not a real ECC error */
+ check_erased_page = true;
+ }
+
+#if DEBUG_DENALI
+ printk("Detected ECC error in page %d: err_addr = 0x%08x,"
+ " info to fix is 0x%08x\n", denali->page, err_address,
+ err_correction_info);
+#endif
+ } while (!ECC_LAST_ERR(err_correction_info));
+ }
+ return check_erased_page;
+}
+
+/* programs the controller to either enable/disable DMA transfers */
+static void denali_enable_dma(struct denali_nand_info *denali, bool en)
+{
+ uint32_t reg_val = 0x0;
+
+ if (en) reg_val = DMA_ENABLE__FLAG;
+
+ denali_write32(reg_val, denali->flash_reg + DMA_ENABLE);
+ ioread32(denali->flash_reg + DMA_ENABLE);
+}
+
+/* setups the HW to perform the data DMA */
+static void denali_setup_dma(struct denali_nand_info *denali, int op)
+{
+ uint32_t mode = 0x0;
+ const int page_count = 1;
+ dma_addr_t addr = denali->buf.dma_buf;
+
+ mode = MODE_10 | BANK(denali->flash_bank);
+
+ /* DMA is a four step process */
+
+ /* 1. setup transfer type and # of pages */
+ index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
+
+ /* 2. set memory high address bits 23:8 */
+ index_addr(denali, mode | ((uint16_t)(addr >> 16) << 8), 0x2200);
+
+ /* 3. set memory low address bits 23:8 */
+ index_addr(denali, mode | ((uint16_t)addr << 8), 0x2300);
+
+ /* 4. interrupt when complete, burst len = 64 bytes*/
+ index_addr(denali, mode | 0x14000, 0x2400);
+}
+
+/* writes a page. user specifies type, and this function handles the
+ configuration details. */
+static void write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, bool raw_xfer)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct pci_dev *pci_dev = denali->dev;
+
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+
+ uint32_t irq_status = 0;
+ uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP |
+ INTR_STATUS0__PROGRAM_FAIL;
+
+ /* if it is a raw xfer, we want to disable ecc, and send
+ * the spare area.
+ * !raw_xfer - enable ecc
+ * raw_xfer - transfer spare
+ */
+ setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer);
+
+ /* copy buffer into DMA buffer */
+ memcpy(denali->buf.buf, buf, mtd->writesize);
+
+ if (raw_xfer)
+ {
+ /* transfer the data to the spare area */
+ memcpy(denali->buf.buf + mtd->writesize,
+ chip->oob_poi,
+ mtd->oobsize);
+ }
+
+ pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE);
+
+ clear_interrupts(denali);
+ denali_enable_dma(denali, true);
+
+ denali_setup_dma(denali, DENALI_WRITE);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0)
+ {
+ printk(KERN_ERR "timeout on write_page (type = %d)\n", raw_xfer);
+ denali->status =
+ (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? NAND_STATUS_FAIL :
+ PASS;
+ }
+
+ denali_enable_dma(denali, false);
+ pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE);
+}
+
+/* NAND core entry points */
+
+/* this is the callback that the NAND core calls to write a page. Since
+ writing a page with ECC or without is similar, all the work is done
+ by write_page above. */
+static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ /* for regular page writes, we let HW handle all the ECC
+ * data written to the device. */
+ write_page(mtd, chip, buf, false);
+}
+
+/* This is the callback that the NAND core calls to write a page without ECC.
+ raw access is similiar to ECC page writes, so all the work is done in the
+ write_page() function above.
+ */
+static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf)
+{
+ /* for raw page writes, we want to disable ECC and simply write
+ whatever data is in the buffer. */
+ write_page(mtd, chip, buf, true);
+}
+
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ return write_oob_data(mtd, chip->oob_poi, page);
+}
+
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ read_oob_data(mtd, chip->oob_poi, page);
+
+ return 0; /* notify NAND core to send command to
+ * NAND device. */
+}
+
+static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct pci_dev *pci_dev = denali->dev;
+
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+
+ uint32_t irq_status = 0;
+ uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE |
+ INTR_STATUS0__ECC_ERR;
+ bool check_erased_page = false;
+
+ setup_ecc_for_xfer(denali, true, false);
+
+ denali_enable_dma(denali, true);
+ pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+
+ clear_interrupts(denali);
+ denali_setup_dma(denali, DENALI_READ);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+
+ memcpy(buf, denali->buf.buf, mtd->writesize);
+
+ check_erased_page = handle_ecc(denali, buf, chip->oob_poi, irq_status);
+ denali_enable_dma(denali, false);
+
+ if (check_erased_page)
+ {
+ read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
+
+ /* check ECC failures that may have occurred on erased pages */
+ if (check_erased_page)
+ {
+ if (!is_erased(buf, denali->mtd.writesize))
+ {
+ denali->mtd.ecc_stats.failed++;
+ }
+ if (!is_erased(buf, denali->mtd.oobsize))
+ {
+ denali->mtd.ecc_stats.failed++;
+ }
+ }
+ }
+ return 0;
+}
+
+static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ struct pci_dev *pci_dev = denali->dev;
+
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+
+ uint32_t irq_status = 0;
+ uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP;
+
+ setup_ecc_for_xfer(denali, false, true);
+ denali_enable_dma(denali, true);
+
+ pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+
+ clear_interrupts(denali);
+ denali_setup_dma(denali, DENALI_READ);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE);
+
+ denali_enable_dma(denali, false);
+
+ memcpy(buf, denali->buf.buf, mtd->writesize);
+ memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize);
+
+ return 0;
+}
+
+static uint8_t denali_read_byte(struct mtd_info *mtd)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint8_t result = 0xff;
+
+ if (denali->buf.head < denali->buf.tail)
+ {
+ result = denali->buf.buf[denali->buf.head++];
+ }
+
+#if DEBUG_DENALI
+ printk("read byte -> 0x%02x\n", result);
+#endif
+ return result;
+}
+
+static void denali_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+#if DEBUG_DENALI
+ printk("denali select chip %d\n", chip);
+#endif
+ spin_lock_irq(&denali->irq_lock);
+ denali->flash_bank = chip;
+ spin_unlock_irq(&denali->irq_lock);
+}
+
+static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int status = denali->status;
+ denali->status = 0;
+
+#if DEBUG_DENALI
+ printk("waitfunc %d\n", status);
+#endif
+ return status;
+}
+
+static void denali_erase(struct mtd_info *mtd, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ uint32_t cmd = 0x0, irq_status = 0;
+
+#if DEBUG_DENALI
+ printk("erase page: %d\n", page);
+#endif
+ /* clear interrupts */
+ clear_interrupts(denali);
+
+ /* setup page read request for access type */
+ cmd = MODE_10 | BANK(denali->flash_bank) | page;
+ index_addr(denali, (uint32_t)cmd, 0x1);
+
+ /* wait for erase to complete or failure to occur */
+ irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP |
+ INTR_STATUS0__ERASE_FAIL);
+
+ denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? NAND_STATUS_FAIL :
+ PASS;
+}
+
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
+ int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+#if DEBUG_DENALI
+ printk("cmdfunc: 0x%x %d %d\n", cmd, col, page);
+#endif
+ switch (cmd)
+ {
+ case NAND_CMD_PAGEPROG:
+ break;
+ case NAND_CMD_STATUS:
+ read_status(denali);
+ break;
+ case NAND_CMD_READID:
+ reset_buf(denali);
+ if (denali->flash_bank < denali->total_used_banks)
+ {
+ /* write manufacturer information into nand
+ buffer for NAND subsystem to fetch.
+ */
+ write_byte_to_buf(denali, denali->dev_info.wDeviceMaker);
+ write_byte_to_buf(denali, denali->dev_info.wDeviceID);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam0);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam1);
+ write_byte_to_buf(denali, denali->dev_info.bDeviceParam2);
+ }
+ else
+ {
+ int i;
+ for (i = 0; i < 5; i++)
+ write_byte_to_buf(denali, 0xff);
+ }
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_SEQIN:
+ denali->page = page;
+ break;
+ case NAND_CMD_RESET:
+ reset_bank(denali);
+ break;
+ case NAND_CMD_READOOB:
+ /* TODO: Read OOB data */
+ break;
+ default:
+ printk(KERN_ERR ": unsupported command received 0x%x\n", cmd);
+ break;
+ }
+}
+
+/* stubs for ECC functions not used by the NAND core */
+static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data,
+ uint8_t *ecc_code)
+{
+ printk(KERN_ERR "denali_ecc_calculate called unexpectedly\n");
+ BUG();
+ return -EIO;
+}
+
+static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ printk(KERN_ERR "denali_ecc_correct called unexpectedly\n");
+ BUG();
+ return -EIO;
+}
+
+static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
+{
+ printk(KERN_ERR "denali_ecc_hwctl called unexpectedly\n");
+ BUG();
+}
+/* end NAND core entry points */
+
+/* Initialization code to bring the device up to a known good state */
+static void denali_hw_init(struct denali_nand_info *denali)
+{
+ denali_irq_init(denali);
+ NAND_Flash_Reset(denali);
+ denali_write32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
+ denali_write32(CHIP_EN_DONT_CARE__FLAG, denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+
+ denali_write32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
+ denali_write32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+
+ /* Should set value for these registers when init */
+ denali_write32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
+ denali_write32(1, denali->flash_reg + ECC_ENABLE);
+}
+
+/* ECC layout for SLC devices. Denali spec indicates SLC fixed at 4 bytes */
+#define ECC_BYTES_SLC 4 * (2048 / ECC_SECTOR_SIZE)
+static struct nand_ecclayout nand_oob_slc = {
+ .eccbytes = 4,
+ .eccpos = { 0, 1, 2, 3 }, /* not used */
+ .oobfree = {{
+ .offset = ECC_BYTES_SLC,
+ .length = 64 - ECC_BYTES_SLC
+ }}
+};
+
+#define ECC_BYTES_MLC 14 * (2048 / ECC_SECTOR_SIZE)
+static struct nand_ecclayout nand_oob_mlc_14bit = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, /* not used */
+ .oobfree = {{
+ .offset = ECC_BYTES_MLC,
+ .length = 64 - ECC_BYTES_MLC
+ }}
+};
+
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/* initalize driver data structures */
+void denali_drv_init(struct denali_nand_info *denali)
+{
+ denali->idx = 0;
+
+ /* setup interrupt handler */
+ /* the completion object will be used to notify
+ * the callee that the interrupt is done */
+ init_completion(&denali->complete);
+
+ /* the spinlock will be used to synchronize the ISR
+ * with any element that might be access shared
+ * data (interrupt status) */
+ spin_lock_init(&denali->irq_lock);
+
+ /* indicate that MTD has not selected a valid bank yet */
+ denali->flash_bank = CHIP_SELECT_INVALID;
+
+ /* initialize our irq_status variable to indicate no interrupts */
+ denali->irq_status = 0;
+}
+
+/* driver entry point */
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int ret = -ENODEV;
+ resource_size_t csr_base, mem_base;
+ unsigned long csr_len, mem_len;
+ struct denali_nand_info *denali;
+
+ nand_dbg_print(NAND_DBG_TRACE, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ denali = kzalloc(sizeof(*denali), GFP_KERNEL);
+ if (!denali)
+ return -ENOMEM;
+
+ ret = pci_enable_device(dev);
+ if (ret) {
+ printk(KERN_ERR "Spectra: pci_enable_device failed.\n");
+ goto failed_enable;
+ }
+
+ if (id->driver_data == INTEL_CE4100) {
+ /* Due to a silicon limitation, we can only support
+ * ONFI timing mode 1 and below.
+ */
+ if (onfi_timing_mode < -1 || onfi_timing_mode > 1)
+ {
+ printk("Intel CE4100 only supports ONFI timing mode 1 "
+ "or below\n");
+ ret = -EINVAL;
+ goto failed_enable;
+ }
+ denali->platform = INTEL_CE4100;
+ mem_base = pci_resource_start(dev, 0);
+ mem_len = pci_resource_len(dev, 1);
+ csr_base = pci_resource_start(dev, 1);
+ csr_len = pci_resource_len(dev, 1);
+ } else {
+ denali->platform = INTEL_MRST;
+ csr_base = pci_resource_start(dev, 0);
+ csr_len = pci_resource_start(dev, 0);
+ mem_base = pci_resource_start(dev, 1);
+ mem_len = pci_resource_len(dev, 1);
+ if (!mem_len) {
+ mem_base = csr_base + csr_len;
+ mem_len = csr_len;
+ nand_dbg_print(NAND_DBG_WARN,
+ "Spectra: No second BAR for PCI device; assuming %08Lx\n",
+ (uint64_t)csr_base);
+ }
+ }
+
+ /* Is 32-bit DMA supported? */
+ ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
+
+ if (ret)
+ {
+ printk(KERN_ERR "Spectra: no usable DMA configuration\n");
+ goto failed_enable;
+ }
+ denali->buf.dma_buf = pci_map_single(dev, denali->buf.buf, DENALI_BUF_SIZE,
+ PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(dev, denali->buf.dma_buf))
+ {
+ printk(KERN_ERR "Spectra: failed to map DMA buffer\n");
+ goto failed_enable;
+ }
+
+ pci_set_master(dev);
+ denali->dev = dev;
+
+ ret = pci_request_regions(dev, DENALI_NAND_NAME);
+ if (ret) {
+ printk(KERN_ERR "Spectra: Unable to request memory regions\n");
+ goto failed_req_csr;
+ }
+
+ denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->flash_reg) {
+ printk(KERN_ERR "Spectra: Unable to remap memory region\n");
+ ret = -ENOMEM;
+ goto failed_remap_csr;
+ }
+ nand_dbg_print(NAND_DBG_DEBUG, "Spectra: CSR 0x%08Lx -> 0x%p (0x%lx)\n",
+ (uint64_t)csr_base, denali->flash_reg, csr_len);
+
+ denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+ if (!denali->flash_mem) {
+ printk(KERN_ERR "Spectra: ioremap_nocache failed!");
+ iounmap(denali->flash_reg);
+ ret = -ENOMEM;
+ goto failed_remap_csr;
+ }
+
+ nand_dbg_print(NAND_DBG_WARN,
+ "Spectra: Remapped flash base address: "
+ "0x%p, len: %ld\n",
+ denali->flash_mem, csr_len);
+
+ denali_hw_init(denali);
+ denali_drv_init(denali);
+
+ nand_dbg_print(NAND_DBG_DEBUG, "Spectra: IRQ %d\n", dev->irq);
+ if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
+ DENALI_NAND_NAME, denali)) {
+ printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
+ ret = -ENODEV;
+ goto failed_request_irq;
+ }
+
+ /* now that our ISR is registered, we can enable interrupts */
+ NAND_LLD_Enable_Disable_Interrupts(denali, true);
+
+ pci_set_drvdata(dev, denali);
+
+ NAND_Read_Device_ID(denali);
+
+ /* MTD supported page sizes vary by kernel. We validate our
+ kernel supports the device here.
+ */
+ if (denali->dev_info.wPageSize > NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
+ {
+ ret = -ENODEV;
+ printk(KERN_ERR "Spectra: device size not supported by this "
+ "version of MTD.");
+ goto failed_nand;
+ }
+
+ nand_dbg_print(NAND_DBG_DEBUG, "Dump timing register values:"
+ "acc_clks: %d, re_2_we: %d, we_2_re: %d,"
+ "addr_2_data: %d, rdwr_en_lo_cnt: %d, "
+ "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
+ ioread32(denali->flash_reg + ACC_CLKS),
+ ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + WE_2_RE),
+ ioread32(denali->flash_reg + ADDR_2_DATA),
+ ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
+ ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
+ ioread32(denali->flash_reg + CS_SETUP_CNT));
+
+ denali->mtd.name = "Denali NAND";
+ denali->mtd.owner = THIS_MODULE;
+ denali->mtd.priv = &denali->nand;
+
+ /* register the driver with the NAND core subsystem */
+ denali->nand.select_chip = denali_select_chip;
+ denali->nand.cmdfunc = denali_cmdfunc;
+ denali->nand.read_byte = denali_read_byte;
+ denali->nand.waitfunc = denali_waitfunc;
+
+ /* scan for NAND devices attached to the controller
+ * this is the first stage in a two step process to register
+ * with the nand subsystem */
+ if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL))
+ {
+ ret = -ENXIO;
+ goto failed_nand;
+ }
+
+ /* second stage of the NAND scan
+ * this stage requires information regarding ECC and
+ * bad block management. */
+
+ /* Bad block management */
+ denali->nand.bbt_td = &bbt_main_descr;
+ denali->nand.bbt_md = &bbt_mirror_descr;
+
+ /* skip the scan for now until we have OOB read and write support */
+ denali->nand.options |= NAND_USE_FLASH_BBT | NAND_SKIP_BBTSCAN;
+ denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+
+ if (denali->dev_info.MLCDevice)
+ {
+ denali->nand.ecc.layout = &nand_oob_mlc_14bit;
+ denali->nand.ecc.bytes = ECC_BYTES_MLC;
+ }
+ else /* SLC */
+ {
+ denali->nand.ecc.layout = &nand_oob_slc;
+ denali->nand.ecc.bytes = ECC_BYTES_SLC;
+ }
+
+ /* These functions are required by the NAND core framework, otherwise,
+ the NAND core will assert. However, we don't need them, so we'll stub
+ them out. */
+ denali->nand.ecc.calculate = denali_ecc_calculate;
+ denali->nand.ecc.correct = denali_ecc_correct;
+ denali->nand.ecc.hwctl = denali_ecc_hwctl;
+
+ /* override the default read operations */
+ denali->nand.ecc.size = denali->mtd.writesize;
+ denali->nand.ecc.read_page = denali_read_page;
+ denali->nand.ecc.read_page_raw = denali_read_page_raw;
+ denali->nand.ecc.write_page = denali_write_page;
+ denali->nand.ecc.write_page_raw = denali_write_page_raw;
+ denali->nand.ecc.read_oob = denali_read_oob;
+ denali->nand.ecc.write_oob = denali_write_oob;
+ denali->nand.erase_cmd = denali_erase;
+
+ if (nand_scan_tail(&denali->mtd))
+ {
+ ret = -ENXIO;
+ goto failed_nand;
+ }
+
+ ret = add_mtd_device(&denali->mtd);
+ if (ret) {
+ printk(KERN_ERR "Spectra: Failed to register MTD device: %d\n", ret);
+ goto failed_nand;
+ }
+ return 0;
+
+ failed_nand:
+ denali_irq_cleanup(dev->irq, denali);
+ failed_request_irq:
+ iounmap(denali->flash_reg);
+ iounmap(denali->flash_mem);
+ failed_remap_csr:
+ pci_release_regions(dev);
+ failed_req_csr:
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ PCI_DMA_BIDIRECTIONAL);
+ failed_enable:
+ kfree(denali);
+ return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+ struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+ nand_dbg_print(NAND_DBG_WARN, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ nand_release(&denali->mtd);
+ del_mtd_device(&denali->mtd);
+
+ denali_irq_cleanup(dev->irq, denali);
+
+ iounmap(denali->flash_reg);
+ iounmap(denali->flash_mem);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE,
+ PCI_DMA_BIDIRECTIONAL);
+ pci_set_drvdata(dev, NULL);
+ kfree(denali);
+}
+
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static struct pci_driver denali_pci_driver = {
+ .name = DENALI_NAND_NAME,
+ .id_table = denali_pci_ids,
+ .probe = denali_pci_probe,
+ .remove = denali_pci_remove,
+};
+
+static int __devinit denali_init(void)
+{
+ printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", __DATE__, __TIME__);
+ return pci_register_driver(&denali_pci_driver);
+}
+
+/* Free memory */
+static void __devexit denali_exit(void)
+{
+ pci_unregister_driver(&denali_pci_driver);
+}
+
+module_init(denali_init);
+module_exit(denali_exit);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
new file mode 100644
index 000000000000..422a29ab2f60
--- /dev/null
+++ b/drivers/mtd/nand/denali.h
@@ -0,0 +1,816 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009 - 2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/mtd/nand.h>
+
+#define DEVICE_RESET 0x0
+#define DEVICE_RESET__BANK0 0x0001
+#define DEVICE_RESET__BANK1 0x0002
+#define DEVICE_RESET__BANK2 0x0004
+#define DEVICE_RESET__BANK3 0x0008
+
+#define TRANSFER_SPARE_REG 0x10
+#define TRANSFER_SPARE_REG__FLAG 0x0001
+
+#define LOAD_WAIT_CNT 0x20
+#define LOAD_WAIT_CNT__VALUE 0xffff
+
+#define PROGRAM_WAIT_CNT 0x30
+#define PROGRAM_WAIT_CNT__VALUE 0xffff
+
+#define ERASE_WAIT_CNT 0x40
+#define ERASE_WAIT_CNT__VALUE 0xffff
+
+#define INT_MON_CYCCNT 0x50
+#define INT_MON_CYCCNT__VALUE 0xffff
+
+#define RB_PIN_ENABLED 0x60
+#define RB_PIN_ENABLED__BANK0 0x0001
+#define RB_PIN_ENABLED__BANK1 0x0002
+#define RB_PIN_ENABLED__BANK2 0x0004
+#define RB_PIN_ENABLED__BANK3 0x0008
+
+#define MULTIPLANE_OPERATION 0x70
+#define MULTIPLANE_OPERATION__FLAG 0x0001
+
+#define MULTIPLANE_READ_ENABLE 0x80
+#define MULTIPLANE_READ_ENABLE__FLAG 0x0001
+
+#define COPYBACK_DISABLE 0x90
+#define COPYBACK_DISABLE__FLAG 0x0001
+
+#define CACHE_WRITE_ENABLE 0xa0
+#define CACHE_WRITE_ENABLE__FLAG 0x0001
+
+#define CACHE_READ_ENABLE 0xb0
+#define CACHE_READ_ENABLE__FLAG 0x0001
+
+#define PREFETCH_MODE 0xc0
+#define PREFETCH_MODE__PREFETCH_EN 0x0001
+#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0
+
+#define CHIP_ENABLE_DONT_CARE 0xd0
+#define CHIP_EN_DONT_CARE__FLAG 0x01
+
+#define ECC_ENABLE 0xe0
+#define ECC_ENABLE__FLAG 0x0001
+
+#define GLOBAL_INT_ENABLE 0xf0
+#define GLOBAL_INT_EN_FLAG 0x01
+
+#define WE_2_RE 0x100
+#define WE_2_RE__VALUE 0x003f
+
+#define ADDR_2_DATA 0x110
+#define ADDR_2_DATA__VALUE 0x003f
+
+#define RE_2_WE 0x120
+#define RE_2_WE__VALUE 0x003f
+
+#define ACC_CLKS 0x130
+#define ACC_CLKS__VALUE 0x000f
+
+#define NUMBER_OF_PLANES 0x140
+#define NUMBER_OF_PLANES__VALUE 0x0007
+
+#define PAGES_PER_BLOCK 0x150
+#define PAGES_PER_BLOCK__VALUE 0xffff
+
+#define DEVICE_WIDTH 0x160
+#define DEVICE_WIDTH__VALUE 0x0003
+
+#define DEVICE_MAIN_AREA_SIZE 0x170
+#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff
+
+#define DEVICE_SPARE_AREA_SIZE 0x180
+#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff
+
+#define TWO_ROW_ADDR_CYCLES 0x190
+#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001
+
+#define MULTIPLANE_ADDR_RESTRICT 0x1a0
+#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001
+
+#define ECC_CORRECTION 0x1b0
+#define ECC_CORRECTION__VALUE 0x001f
+
+#define READ_MODE 0x1c0
+#define READ_MODE__VALUE 0x000f
+
+#define WRITE_MODE 0x1d0
+#define WRITE_MODE__VALUE 0x000f
+
+#define COPYBACK_MODE 0x1e0
+#define COPYBACK_MODE__VALUE 0x000f
+
+#define RDWR_EN_LO_CNT 0x1f0
+#define RDWR_EN_LO_CNT__VALUE 0x001f
+
+#define RDWR_EN_HI_CNT 0x200
+#define RDWR_EN_HI_CNT__VALUE 0x001f
+
+#define MAX_RD_DELAY 0x210
+#define MAX_RD_DELAY__VALUE 0x000f
+
+#define CS_SETUP_CNT 0x220
+#define CS_SETUP_CNT__VALUE 0x001f
+
+#define SPARE_AREA_SKIP_BYTES 0x230
+#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f
+
+#define SPARE_AREA_MARKER 0x240
+#define SPARE_AREA_MARKER__VALUE 0xffff
+
+#define DEVICES_CONNECTED 0x250
+#define DEVICES_CONNECTED__VALUE 0x0007
+
+#define DIE_MASK 0x260
+#define DIE_MASK__VALUE 0x00ff
+
+#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
+#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff
+
+#define WRITE_PROTECT 0x280
+#define WRITE_PROTECT__FLAG 0x0001
+
+#define RE_2_RE 0x290
+#define RE_2_RE__VALUE 0x003f
+
+#define MANUFACTURER_ID 0x300
+#define MANUFACTURER_ID__VALUE 0x00ff
+
+#define DEVICE_ID 0x310
+#define DEVICE_ID__VALUE 0x00ff
+
+#define DEVICE_PARAM_0 0x320
+#define DEVICE_PARAM_0__VALUE 0x00ff
+
+#define DEVICE_PARAM_1 0x330
+#define DEVICE_PARAM_1__VALUE 0x00ff
+
+#define DEVICE_PARAM_2 0x340
+#define DEVICE_PARAM_2__VALUE 0x00ff
+
+#define LOGICAL_PAGE_DATA_SIZE 0x350
+#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff
+
+#define LOGICAL_PAGE_SPARE_SIZE 0x360
+#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
+
+#define REVISION 0x370
+#define REVISION__VALUE 0xffff
+
+#define ONFI_DEVICE_FEATURES 0x380
+#define ONFI_DEVICE_FEATURES__VALUE 0x003f
+
+#define ONFI_OPTIONAL_COMMANDS 0x390
+#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
+
+#define ONFI_TIMING_MODE 0x3a0
+#define ONFI_TIMING_MODE__VALUE 0x003f
+
+#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
+#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f
+
+#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
+#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff
+#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff
+
+#define FEATURES 0x3f0
+#define FEATURES__N_BANKS 0x0003
+#define FEATURES__ECC_MAX_ERR 0x003c
+#define FEATURES__DMA 0x0040
+#define FEATURES__CMD_DMA 0x0080
+#define FEATURES__PARTITION 0x0100
+#define FEATURES__XDMA_SIDEBAND 0x0200
+#define FEATURES__GPREG 0x0400
+#define FEATURES__INDEX_ADDR 0x0800
+
+#define TRANSFER_MODE 0x400
+#define TRANSFER_MODE__VALUE 0x0003
+
+#define INTR_STATUS0 0x410
+#define INTR_STATUS0__ECC_TRANSACTION_DONE 0x0001
+#define INTR_STATUS0__ECC_ERR 0x0002
+#define INTR_STATUS0__DMA_CMD_COMP 0x0004
+#define INTR_STATUS0__TIME_OUT 0x0008
+#define INTR_STATUS0__PROGRAM_FAIL 0x0010
+#define INTR_STATUS0__ERASE_FAIL 0x0020
+#define INTR_STATUS0__LOAD_COMP 0x0040
+#define INTR_STATUS0__PROGRAM_COMP 0x0080
+#define INTR_STATUS0__ERASE_COMP 0x0100
+#define INTR_STATUS0__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_STATUS0__LOCKED_BLK 0x0400
+#define INTR_STATUS0__UNSUP_CMD 0x0800
+#define INTR_STATUS0__INT_ACT 0x1000
+#define INTR_STATUS0__RST_COMP 0x2000
+#define INTR_STATUS0__PIPE_CMD_ERR 0x4000
+#define INTR_STATUS0__PAGE_XFER_INC 0x8000
+
+#define INTR_EN0 0x420
+#define INTR_EN0__ECC_TRANSACTION_DONE 0x0001
+#define INTR_EN0__ECC_ERR 0x0002
+#define INTR_EN0__DMA_CMD_COMP 0x0004
+#define INTR_EN0__TIME_OUT 0x0008
+#define INTR_EN0__PROGRAM_FAIL 0x0010
+#define INTR_EN0__ERASE_FAIL 0x0020
+#define INTR_EN0__LOAD_COMP 0x0040
+#define INTR_EN0__PROGRAM_COMP 0x0080
+#define INTR_EN0__ERASE_COMP 0x0100
+#define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_EN0__LOCKED_BLK 0x0400
+#define INTR_EN0__UNSUP_CMD 0x0800
+#define INTR_EN0__INT_ACT 0x1000
+#define INTR_EN0__RST_COMP 0x2000
+#define INTR_EN0__PIPE_CMD_ERR 0x4000
+#define INTR_EN0__PAGE_XFER_INC 0x8000
+
+#define PAGE_CNT0 0x430
+#define PAGE_CNT0__VALUE 0x00ff
+
+#define ERR_PAGE_ADDR0 0x440
+#define ERR_PAGE_ADDR0__VALUE 0xffff
+
+#define ERR_BLOCK_ADDR0 0x450
+#define ERR_BLOCK_ADDR0__VALUE 0xffff
+
+#define INTR_STATUS1 0x460
+#define INTR_STATUS1__ECC_TRANSACTION_DONE 0x0001
+#define INTR_STATUS1__ECC_ERR 0x0002
+#define INTR_STATUS1__DMA_CMD_COMP 0x0004
+#define INTR_STATUS1__TIME_OUT 0x0008
+#define INTR_STATUS1__PROGRAM_FAIL 0x0010
+#define INTR_STATUS1__ERASE_FAIL 0x0020
+#define INTR_STATUS1__LOAD_COMP 0x0040
+#define INTR_STATUS1__PROGRAM_COMP 0x0080
+#define INTR_STATUS1__ERASE_COMP 0x0100
+#define INTR_STATUS1__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_STATUS1__LOCKED_BLK 0x0400
+#define INTR_STATUS1__UNSUP_CMD 0x0800
+#define INTR_STATUS1__INT_ACT 0x1000
+#define INTR_STATUS1__RST_COMP 0x2000
+#define INTR_STATUS1__PIPE_CMD_ERR 0x4000
+#define INTR_STATUS1__PAGE_XFER_INC 0x8000
+
+#define INTR_EN1 0x470
+#define INTR_EN1__ECC_TRANSACTION_DONE 0x0001
+#define INTR_EN1__ECC_ERR 0x0002
+#define INTR_EN1__DMA_CMD_COMP 0x0004
+#define INTR_EN1__TIME_OUT 0x0008
+#define INTR_EN1__PROGRAM_FAIL 0x0010
+#define INTR_EN1__ERASE_FAIL 0x0020
+#define INTR_EN1__LOAD_COMP 0x0040
+#define INTR_EN1__PROGRAM_COMP 0x0080
+#define INTR_EN1__ERASE_COMP 0x0100
+#define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_EN1__LOCKED_BLK 0x0400
+#define INTR_EN1__UNSUP_CMD 0x0800
+#define INTR_EN1__INT_ACT 0x1000
+#define INTR_EN1__RST_COMP 0x2000
+#define INTR_EN1__PIPE_CMD_ERR 0x4000
+#define INTR_EN1__PAGE_XFER_INC 0x8000
+
+#define PAGE_CNT1 0x480
+#define PAGE_CNT1__VALUE 0x00ff
+
+#define ERR_PAGE_ADDR1 0x490
+#define ERR_PAGE_ADDR1__VALUE 0xffff
+
+#define ERR_BLOCK_ADDR1 0x4a0
+#define ERR_BLOCK_ADDR1__VALUE 0xffff
+
+#define INTR_STATUS2 0x4b0
+#define INTR_STATUS2__ECC_TRANSACTION_DONE 0x0001
+#define INTR_STATUS2__ECC_ERR 0x0002
+#define INTR_STATUS2__DMA_CMD_COMP 0x0004
+#define INTR_STATUS2__TIME_OUT 0x0008
+#define INTR_STATUS2__PROGRAM_FAIL 0x0010
+#define INTR_STATUS2__ERASE_FAIL 0x0020
+#define INTR_STATUS2__LOAD_COMP 0x0040
+#define INTR_STATUS2__PROGRAM_COMP 0x0080
+#define INTR_STATUS2__ERASE_COMP 0x0100
+#define INTR_STATUS2__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_STATUS2__LOCKED_BLK 0x0400
+#define INTR_STATUS2__UNSUP_CMD 0x0800
+#define INTR_STATUS2__INT_ACT 0x1000
+#define INTR_STATUS2__RST_COMP 0x2000
+#define INTR_STATUS2__PIPE_CMD_ERR 0x4000
+#define INTR_STATUS2__PAGE_XFER_INC 0x8000
+
+#define INTR_EN2 0x4c0
+#define INTR_EN2__ECC_TRANSACTION_DONE 0x0001
+#define INTR_EN2__ECC_ERR 0x0002
+#define INTR_EN2__DMA_CMD_COMP 0x0004
+#define INTR_EN2__TIME_OUT 0x0008
+#define INTR_EN2__PROGRAM_FAIL 0x0010
+#define INTR_EN2__ERASE_FAIL 0x0020
+#define INTR_EN2__LOAD_COMP 0x0040
+#define INTR_EN2__PROGRAM_COMP 0x0080
+#define INTR_EN2__ERASE_COMP 0x0100
+#define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_EN2__LOCKED_BLK 0x0400
+#define INTR_EN2__UNSUP_CMD 0x0800
+#define INTR_EN2__INT_ACT 0x1000
+#define INTR_EN2__RST_COMP 0x2000
+#define INTR_EN2__PIPE_CMD_ERR 0x4000
+#define INTR_EN2__PAGE_XFER_INC 0x8000
+
+#define PAGE_CNT2 0x4d0
+#define PAGE_CNT2__VALUE 0x00ff
+
+#define ERR_PAGE_ADDR2 0x4e0
+#define ERR_PAGE_ADDR2__VALUE 0xffff
+
+#define ERR_BLOCK_ADDR2 0x4f0
+#define ERR_BLOCK_ADDR2__VALUE 0xffff
+
+#define INTR_STATUS3 0x500
+#define INTR_STATUS3__ECC_TRANSACTION_DONE 0x0001
+#define INTR_STATUS3__ECC_ERR 0x0002
+#define INTR_STATUS3__DMA_CMD_COMP 0x0004
+#define INTR_STATUS3__TIME_OUT 0x0008
+#define INTR_STATUS3__PROGRAM_FAIL 0x0010
+#define INTR_STATUS3__ERASE_FAIL 0x0020
+#define INTR_STATUS3__LOAD_COMP 0x0040
+#define INTR_STATUS3__PROGRAM_COMP 0x0080
+#define INTR_STATUS3__ERASE_COMP 0x0100
+#define INTR_STATUS3__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_STATUS3__LOCKED_BLK 0x0400
+#define INTR_STATUS3__UNSUP_CMD 0x0800
+#define INTR_STATUS3__INT_ACT 0x1000
+#define INTR_STATUS3__RST_COMP 0x2000
+#define INTR_STATUS3__PIPE_CMD_ERR 0x4000
+#define INTR_STATUS3__PAGE_XFER_INC 0x8000
+
+#define INTR_EN3 0x510
+#define INTR_EN3__ECC_TRANSACTION_DONE 0x0001
+#define INTR_EN3__ECC_ERR 0x0002
+#define INTR_EN3__DMA_CMD_COMP 0x0004
+#define INTR_EN3__TIME_OUT 0x0008
+#define INTR_EN3__PROGRAM_FAIL 0x0010
+#define INTR_EN3__ERASE_FAIL 0x0020
+#define INTR_EN3__LOAD_COMP 0x0040
+#define INTR_EN3__PROGRAM_COMP 0x0080
+#define INTR_EN3__ERASE_COMP 0x0100
+#define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_EN3__LOCKED_BLK 0x0400
+#define INTR_EN3__UNSUP_CMD 0x0800
+#define INTR_EN3__INT_ACT 0x1000
+#define INTR_EN3__RST_COMP 0x2000
+#define INTR_EN3__PIPE_CMD_ERR 0x4000
+#define INTR_EN3__PAGE_XFER_INC 0x8000
+
+#define PAGE_CNT3 0x520
+#define PAGE_CNT3__VALUE 0x00ff
+
+#define ERR_PAGE_ADDR3 0x530
+#define ERR_PAGE_ADDR3__VALUE 0xffff
+
+#define ERR_BLOCK_ADDR3 0x540
+#define ERR_BLOCK_ADDR3__VALUE 0xffff
+
+#define DATA_INTR 0x550
+#define DATA_INTR__WRITE_SPACE_AV 0x0001
+#define DATA_INTR__READ_DATA_AV 0x0002
+
+#define DATA_INTR_EN 0x560
+#define DATA_INTR_EN__WRITE_SPACE_AV 0x0001
+#define DATA_INTR_EN__READ_DATA_AV 0x0002
+
+#define GPREG_0 0x570
+#define GPREG_0__VALUE 0xffff
+
+#define GPREG_1 0x580
+#define GPREG_1__VALUE 0xffff
+
+#define GPREG_2 0x590
+#define GPREG_2__VALUE 0xffff
+
+#define GPREG_3 0x5a0
+#define GPREG_3__VALUE 0xffff
+
+#define ECC_THRESHOLD 0x600
+#define ECC_THRESHOLD__VALUE 0x03ff
+
+#define ECC_ERROR_BLOCK_ADDRESS 0x610
+#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
+
+#define ECC_ERROR_PAGE_ADDRESS 0x620
+#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff
+#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000
+
+#define ECC_ERROR_ADDRESS 0x630
+#define ECC_ERROR_ADDRESS__OFFSET 0x0fff
+#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000
+
+#define ERR_CORRECTION_INFO 0x640
+#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff
+#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00
+#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000
+#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000
+
+#define DMA_ENABLE 0x700
+#define DMA_ENABLE__FLAG 0x0001
+
+#define IGNORE_ECC_DONE 0x710
+#define IGNORE_ECC_DONE__FLAG 0x0001
+
+#define DMA_INTR 0x720
+#define DMA_INTR__TARGET_ERROR 0x0001
+#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
+#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
+#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
+#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
+#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
+
+#define DMA_INTR_EN 0x730
+#define DMA_INTR_EN__TARGET_ERROR 0x0001
+#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002
+#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004
+#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008
+#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010
+#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020
+
+#define TARGET_ERR_ADDR_LO 0x740
+#define TARGET_ERR_ADDR_LO__VALUE 0xffff
+
+#define TARGET_ERR_ADDR_HI 0x750
+#define TARGET_ERR_ADDR_HI__VALUE 0xffff
+
+#define CHNL_ACTIVE 0x760
+#define CHNL_ACTIVE__CHANNEL0 0x0001
+#define CHNL_ACTIVE__CHANNEL1 0x0002
+#define CHNL_ACTIVE__CHANNEL2 0x0004
+#define CHNL_ACTIVE__CHANNEL3 0x0008
+
+#define ACTIVE_SRC_ID 0x800
+#define ACTIVE_SRC_ID__VALUE 0x00ff
+
+#define PTN_INTR 0x810
+#define PTN_INTR__CONFIG_ERROR 0x0001
+#define PTN_INTR__ACCESS_ERROR_BANK0 0x0002
+#define PTN_INTR__ACCESS_ERROR_BANK1 0x0004
+#define PTN_INTR__ACCESS_ERROR_BANK2 0x0008
+#define PTN_INTR__ACCESS_ERROR_BANK3 0x0010
+#define PTN_INTR__REG_ACCESS_ERROR 0x0020
+
+#define PTN_INTR_EN 0x820
+#define PTN_INTR_EN__CONFIG_ERROR 0x0001
+#define PTN_INTR_EN__ACCESS_ERROR_BANK0 0x0002
+#define PTN_INTR_EN__ACCESS_ERROR_BANK1 0x0004
+#define PTN_INTR_EN__ACCESS_ERROR_BANK2 0x0008
+#define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010
+#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
+
+#define PERM_SRC_ID_0 0x830
+#define PERM_SRC_ID_0__SRCID 0x00ff
+#define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_0__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_0__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_0 0x840
+#define MIN_BLK_ADDR_0__VALUE 0xffff
+
+#define MAX_BLK_ADDR_0 0x850
+#define MAX_BLK_ADDR_0__VALUE 0xffff
+
+#define MIN_MAX_BANK_0 0x860
+#define MIN_MAX_BANK_0__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_0__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_1 0x870
+#define PERM_SRC_ID_1__SRCID 0x00ff
+#define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_1__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_1__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_1 0x880
+#define MIN_BLK_ADDR_1__VALUE 0xffff
+
+#define MAX_BLK_ADDR_1 0x890
+#define MAX_BLK_ADDR_1__VALUE 0xffff
+
+#define MIN_MAX_BANK_1 0x8a0
+#define MIN_MAX_BANK_1__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_1__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_2 0x8b0
+#define PERM_SRC_ID_2__SRCID 0x00ff
+#define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_2__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_2__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_2 0x8c0
+#define MIN_BLK_ADDR_2__VALUE 0xffff
+
+#define MAX_BLK_ADDR_2 0x8d0
+#define MAX_BLK_ADDR_2__VALUE 0xffff
+
+#define MIN_MAX_BANK_2 0x8e0
+#define MIN_MAX_BANK_2__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_2__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_3 0x8f0
+#define PERM_SRC_ID_3__SRCID 0x00ff
+#define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_3__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_3__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_3 0x900
+#define MIN_BLK_ADDR_3__VALUE 0xffff
+
+#define MAX_BLK_ADDR_3 0x910
+#define MAX_BLK_ADDR_3__VALUE 0xffff
+
+#define MIN_MAX_BANK_3 0x920
+#define MIN_MAX_BANK_3__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_3__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_4 0x930
+#define PERM_SRC_ID_4__SRCID 0x00ff
+#define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_4__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_4__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_4 0x940
+#define MIN_BLK_ADDR_4__VALUE 0xffff
+
+#define MAX_BLK_ADDR_4 0x950
+#define MAX_BLK_ADDR_4__VALUE 0xffff
+
+#define MIN_MAX_BANK_4 0x960
+#define MIN_MAX_BANK_4__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_4__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_5 0x970
+#define PERM_SRC_ID_5__SRCID 0x00ff
+#define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_5__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_5__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_5 0x980
+#define MIN_BLK_ADDR_5__VALUE 0xffff
+
+#define MAX_BLK_ADDR_5 0x990
+#define MAX_BLK_ADDR_5__VALUE 0xffff
+
+#define MIN_MAX_BANK_5 0x9a0
+#define MIN_MAX_BANK_5__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_5__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_6 0x9b0
+#define PERM_SRC_ID_6__SRCID 0x00ff
+#define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_6__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_6__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_6 0x9c0
+#define MIN_BLK_ADDR_6__VALUE 0xffff
+
+#define MAX_BLK_ADDR_6 0x9d0
+#define MAX_BLK_ADDR_6__VALUE 0xffff
+
+#define MIN_MAX_BANK_6 0x9e0
+#define MIN_MAX_BANK_6__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_6__MAX_VALUE 0x000c
+
+#define PERM_SRC_ID_7 0x9f0
+#define PERM_SRC_ID_7__SRCID 0x00ff
+#define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID_7__READ_ACTIVE 0x4000
+#define PERM_SRC_ID_7__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR_7 0xa00
+#define MIN_BLK_ADDR_7__VALUE 0xffff
+
+#define MAX_BLK_ADDR_7 0xa10
+#define MAX_BLK_ADDR_7__VALUE 0xffff
+
+#define MIN_MAX_BANK_7 0xa20
+#define MIN_MAX_BANK_7__MIN_VALUE 0x0003
+#define MIN_MAX_BANK_7__MAX_VALUE 0x000c
+
+/* flash.h */
+struct device_info_tag {
+ uint16_t wDeviceMaker;
+ uint16_t wDeviceID;
+ uint8_t bDeviceParam0;
+ uint8_t bDeviceParam1;
+ uint8_t bDeviceParam2;
+ uint32_t wDeviceType;
+ uint32_t wSpectraStartBlock;
+ uint32_t wSpectraEndBlock;
+ uint32_t wTotalBlocks;
+ uint16_t wPagesPerBlock;
+ uint16_t wPageSize;
+ uint16_t wPageDataSize;
+ uint16_t wPageSpareSize;
+ uint16_t wNumPageSpareFlag;
+ uint16_t wECCBytesPerSector;
+ uint32_t wBlockSize;
+ uint32_t wBlockDataSize;
+ uint32_t wDataBlockNum;
+ uint8_t bPlaneNum;
+ uint16_t wDeviceMainAreaSize;
+ uint16_t wDeviceSpareAreaSize;
+ uint16_t wDevicesConnected;
+ uint16_t wDeviceWidth;
+ uint16_t wHWRevision;
+ uint16_t wHWFeatures;
+
+ uint16_t wONFIDevFeatures;
+ uint16_t wONFIOptCommands;
+ uint16_t wONFITimingMode;
+ uint16_t wONFIPgmCacheTimingMode;
+
+ uint16_t MLCDevice;
+ uint16_t wSpareSkipBytes;
+
+ uint8_t nBitsInPageNumber;
+ uint8_t nBitsInPageDataSize;
+ uint8_t nBitsInBlockDataSize;
+};
+
+/* ffsdefs.h */
+#define CLEAR 0 /*use this to clear a field instead of "fail"*/
+#define SET 1 /*use this to set a field instead of "pass"*/
+#define FAIL 1 /*failed flag*/
+#define PASS 0 /*success flag*/
+#define ERR -1 /*error flag*/
+
+/* lld.h */
+#define GOOD_BLOCK 0
+#define DEFECTIVE_BLOCK 1
+#define READ_ERROR 2
+
+#define CLK_X 5
+#define CLK_MULTI 4
+
+/* ffsport.h */
+#define VERBOSE 1
+
+#define NAND_DBG_WARN 1
+#define NAND_DBG_DEBUG 2
+#define NAND_DBG_TRACE 3
+
+#ifdef VERBOSE
+#define nand_dbg_print(level, args...) \
+ do { \
+ if (level <= nand_debug_level) \
+ printk(KERN_ALERT args); \
+ } while (0)
+#else
+#define nand_dbg_print(level, args...)
+#endif
+
+
+/* spectraswconfig.h */
+#define CMD_DMA 0
+
+#define SPECTRA_PARTITION_ID 0
+/**** Block Table and Reserved Block Parameters *****/
+#define SPECTRA_START_BLOCK 3
+#define NUM_FREE_BLOCKS_GATE 30
+
+/* KBV - Updated to LNW scratch register address */
+#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR
+#define SCRATCH_REG_SIZE 64
+
+#define GLOB_HWCTL_DEFAULT_BLKS 2048
+
+#define SUPPORT_15BITECC 1
+#define SUPPORT_8BITECC 1
+
+#define CUSTOM_CONF_PARAMS 0
+
+#define ONFI_BLOOM_TIME 1
+#define MODE5_WORKAROUND 0
+
+/* lld_nand.h */
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _LLD_NAND_
+#define _LLD_NAND_
+
+#define MODE_00 0x00000000
+#define MODE_01 0x04000000
+#define MODE_10 0x08000000
+#define MODE_11 0x0C000000
+
+
+#define DATA_TRANSFER_MODE 0
+#define PROTECTION_PER_BLOCK 1
+#define LOAD_WAIT_COUNT 2
+#define PROGRAM_WAIT_COUNT 3
+#define ERASE_WAIT_COUNT 4
+#define INT_MONITOR_CYCLE_COUNT 5
+#define READ_BUSY_PIN_ENABLED 6
+#define MULTIPLANE_OPERATION_SUPPORT 7
+#define PRE_FETCH_MODE 8
+#define CE_DONT_CARE_SUPPORT 9
+#define COPYBACK_SUPPORT 10
+#define CACHE_WRITE_SUPPORT 11
+#define CACHE_READ_SUPPORT 12
+#define NUM_PAGES_IN_BLOCK 13
+#define ECC_ENABLE_SELECT 14
+#define WRITE_ENABLE_2_READ_ENABLE 15
+#define ADDRESS_2_DATA 16
+#define READ_ENABLE_2_WRITE_ENABLE 17
+#define TWO_ROW_ADDRESS_CYCLES 18
+#define MULTIPLANE_ADDRESS_RESTRICT 19
+#define ACC_CLOCKS 20
+#define READ_WRITE_ENABLE_LOW_COUNT 21
+#define READ_WRITE_ENABLE_HIGH_COUNT 22
+
+#define ECC_SECTOR_SIZE 512
+#define LLD_MAX_FLASH_BANKS 4
+
+#define DENALI_BUF_SIZE NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
+
+struct nand_buf
+{
+ int head;
+ int tail;
+ uint8_t buf[DENALI_BUF_SIZE];
+ dma_addr_t dma_buf;
+};
+
+#define INTEL_CE4100 1
+#define INTEL_MRST 2
+
+struct denali_nand_info {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct device_info_tag dev_info;
+ int flash_bank; /* currently selected chip */
+ int status;
+ int platform;
+ struct nand_buf buf;
+ struct pci_dev *dev;
+ int total_used_banks;
+ uint32_t block; /* stored for future use */
+ uint16_t page;
+ void __iomem *flash_reg; /* Mapped io reg base address */
+ void __iomem *flash_mem; /* Mapped io reg base address */
+
+ /* elements used by ISR */
+ struct completion complete;
+ spinlock_t irq_lock;
+ uint32_t irq_status;
+ int irq_debug_array[32];
+ int idx;
+};
+
+static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
+static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
+static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+
+#endif /*_LLD_NAND_*/
+
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index f45a8d0c1508..5084cc517944 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -874,7 +874,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
priv->ctrl = ctrl;
priv->dev = ctrl->dev;
- priv->vbase = ioremap(res.start, res.end - res.start + 1);
+ priv->vbase = ioremap(res.start, resource_size(&res));
if (!priv->vbase) {
dev_err(ctrl->dev, "failed to map chip region\n");
ret = -ENOMEM;
@@ -891,7 +891,7 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
if (ret)
goto err;
- ret = nand_scan_ident(&priv->mtd, 1);
+ ret = nand_scan_ident(&priv->mtd, 1, NULL);
if (ret)
goto err;
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
index b7ab5a0ec35d..00aea6f7d1f1 100644
--- a/drivers/mtd/nand/fsl_upm.c
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -49,7 +49,10 @@ struct fsl_upm_nand {
uint32_t wait_flags;
};
-#define to_fsl_upm_nand(mtd) container_of(mtd, struct fsl_upm_nand, mtd)
+static inline struct fsl_upm_nand *to_fsl_upm_nand(struct mtd_info *mtdinfo)
+{
+ return container_of(mtdinfo, struct fsl_upm_nand, mtd);
+}
static int fun_chip_ready(struct mtd_info *mtd)
{
@@ -303,7 +306,7 @@ static int __devinit fun_probe(struct of_device *ofdev,
FSL_UPM_WAIT_WRITE_BYTE;
fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
- io_res.end - io_res.start + 1);
+ resource_size(&io_res));
if (!fun->io_base) {
ret = -ENOMEM;
goto err2;
@@ -350,7 +353,7 @@ static int __devexit fun_remove(struct of_device *ofdev)
return 0;
}
-static struct of_device_id of_fun_match[] = {
+static const struct of_device_id of_fun_match[] = {
{ .compatible = "fsl,upm-nand" },
{},
};
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
index 8f902e75aa85..0cde618bcc1e 100644
--- a/drivers/mtd/nand/gpio.c
+++ b/drivers/mtd/nand/gpio.c
@@ -181,11 +181,11 @@ static int __devexit gpio_nand_remove(struct platform_device *dev)
res = platform_get_resource(dev, IORESOURCE_MEM, 1);
iounmap(gpiomtd->io_sync);
if (res)
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
iounmap(gpiomtd->nand_chip.IO_ADDR_R);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
@@ -208,14 +208,14 @@ static void __iomem *request_and_remap(struct resource *res, size_t size,
{
void __iomem *ptr;
- if (!request_mem_region(res->start, res->end - res->start + 1, name)) {
+ if (!request_mem_region(res->start, resource_size(res), name)) {
*err = -EBUSY;
return NULL;
}
ptr = ioremap(res->start, size);
if (!ptr) {
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
*err = -ENOMEM;
}
return ptr;
@@ -338,10 +338,10 @@ err_nwp:
err_nce:
iounmap(gpiomtd->io_sync);
if (res1)
- release_mem_region(res1->start, res1->end - res1->start + 1);
+ release_mem_region(res1->start, resource_size(res1));
err_sync:
iounmap(gpiomtd->nand_chip.IO_ADDR_R);
- release_mem_region(res0->start, res0->end - res0->start + 1);
+ release_mem_region(res0->start, resource_size(res0));
err_map:
kfree(gpiomtd);
return ret;
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
new file mode 100644
index 000000000000..3d0867d829cb
--- /dev/null
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -0,0 +1,917 @@
+/*
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright 2009 Semihalf.
+ *
+ * Approved as OSADL project by a majority of OSADL members and funded
+ * by OSADL membership fees in 2009; for details see www.osadl.org.
+ *
+ * Based on original driver from Freescale Semiconductor
+ * written by John Rigby <jrigby@freescale.com> on basis
+ * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
+ * Piotr Ziecik <kosmo@semihalf.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <asm/mpc5121.h>
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x200)
+
+/* Addresses for NFC SPARE BUFFER areas */
+#define NFC_SPARE_BUFFERS 8
+#define NFC_SPARE_LEN 0x40
+#define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN))
+
+/* MPC5121 NFC registers */
+#define NFC_BUF_ADDR 0x1E04
+#define NFC_FLASH_ADDR 0x1E06
+#define NFC_FLASH_CMD 0x1E08
+#define NFC_CONFIG 0x1E0A
+#define NFC_ECC_STATUS1 0x1E0C
+#define NFC_ECC_STATUS2 0x1E0E
+#define NFC_SPAS 0x1E10
+#define NFC_WRPROT 0x1E12
+#define NFC_NF_WRPRST 0x1E18
+#define NFC_CONFIG1 0x1E1A
+#define NFC_CONFIG2 0x1E1C
+#define NFC_UNLOCKSTART_BLK0 0x1E20
+#define NFC_UNLOCKEND_BLK0 0x1E22
+#define NFC_UNLOCKSTART_BLK1 0x1E24
+#define NFC_UNLOCKEND_BLK1 0x1E26
+#define NFC_UNLOCKSTART_BLK2 0x1E28
+#define NFC_UNLOCKEND_BLK2 0x1E2A
+#define NFC_UNLOCKSTART_BLK3 0x1E2C
+#define NFC_UNLOCKEND_BLK3 0x1E2E
+
+/* Bit Definitions: NFC_BUF_ADDR */
+#define NFC_RBA_MASK (7 << 0)
+#define NFC_ACTIVE_CS_SHIFT 5
+#define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT)
+
+/* Bit Definitions: NFC_CONFIG */
+#define NFC_BLS_UNLOCKED (1 << 1)
+
+/* Bit Definitions: NFC_CONFIG1 */
+#define NFC_ECC_4BIT (1 << 0)
+#define NFC_FULL_PAGE_DMA (1 << 1)
+#define NFC_SPARE_ONLY (1 << 2)
+#define NFC_ECC_ENABLE (1 << 3)
+#define NFC_INT_MASK (1 << 4)
+#define NFC_BIG_ENDIAN (1 << 5)
+#define NFC_RESET (1 << 6)
+#define NFC_CE (1 << 7)
+#define NFC_ONE_CYCLE (1 << 8)
+#define NFC_PPB_32 (0 << 9)
+#define NFC_PPB_64 (1 << 9)
+#define NFC_PPB_128 (2 << 9)
+#define NFC_PPB_256 (3 << 9)
+#define NFC_PPB_MASK (3 << 9)
+#define NFC_FULL_PAGE_INT (1 << 11)
+
+/* Bit Definitions: NFC_CONFIG2 */
+#define NFC_COMMAND (1 << 0)
+#define NFC_ADDRESS (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+#define NFC_CMD_FAIL (1 << 15)
+#define NFC_INT (1 << 15)
+
+/* Bit Definitions: NFC_WRPROT */
+#define NFC_WPC_LOCK_TIGHT (1 << 0)
+#define NFC_WPC_LOCK (1 << 1)
+#define NFC_WPC_UNLOCK (1 << 2)
+
+#define DRV_NAME "mpc5121_nfc"
+
+/* Timeouts */
+#define NFC_RESET_TIMEOUT 1000 /* 1 ms */
+#define NFC_TIMEOUT (HZ / 10) /* 1/10 s */
+
+struct mpc5121_nfc_prv {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int irq;
+ void __iomem *regs;
+ struct clk *clk;
+ wait_queue_head_t irq_waitq;
+ uint column;
+ int spareonly;
+ void __iomem *csreg;
+ struct device *dev;
+};
+
+static void mpc5121_nfc_done(struct mtd_info *mtd);
+
+#ifdef CONFIG_MTD_PARTITIONS
+static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL };
+#endif
+
+/* Read NFC register */
+static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ return in_be16(prv->regs + reg);
+}
+
+/* Write NFC register */
+static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ out_be16(prv->regs + reg, val);
+}
+
+/* Set bits in NFC register */
+static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
+}
+
+/* Clear bits in NFC register */
+static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
+}
+
+/* Invoke address cycle */
+static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
+{
+ nfc_write(mtd, NFC_FLASH_ADDR, addr);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Invoke command cycle */
+static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
+{
+ nfc_write(mtd, NFC_FLASH_CMD, cmd);
+ nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Send data from NFC buffers to NAND flash */
+static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive data from NAND flash */
+static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive ID from NAND flash */
+static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ID);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive status from NAND flash */
+static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
+ mpc5121_nfc_done(mtd);
+}
+
+/* NFC interrupt handler */
+static irqreturn_t mpc5121_nfc_irq(int irq, void *data)
+{
+ struct mtd_info *mtd = data;
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ nfc_set(mtd, NFC_CONFIG1, NFC_INT_MASK);
+ wake_up(&prv->irq_waitq);
+
+ return IRQ_HANDLED;
+}
+
+/* Wait for operation complete */
+static void mpc5121_nfc_done(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ int rv;
+
+ if ((nfc_read(mtd, NFC_CONFIG2) & NFC_INT) == 0) {
+ nfc_clear(mtd, NFC_CONFIG1, NFC_INT_MASK);
+ rv = wait_event_timeout(prv->irq_waitq,
+ (nfc_read(mtd, NFC_CONFIG2) & NFC_INT), NFC_TIMEOUT);
+
+ if (!rv)
+ dev_warn(prv->dev,
+ "Timeout while waiting for interrupt.\n");
+ }
+
+ nfc_clear(mtd, NFC_CONFIG2, NFC_INT);
+}
+
+/* Do address cycle(s) */
+static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ u32 pagemask = chip->pagemask;
+
+ if (column != -1) {
+ mpc5121_nfc_send_addr(mtd, column);
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_addr(mtd, column >> 8);
+ }
+
+ if (page != -1) {
+ do {
+ mpc5121_nfc_send_addr(mtd, page & 0xFF);
+ page >>= 8;
+ pagemask >>= 8;
+ } while (pagemask);
+ }
+}
+
+/* Control chip select signals */
+static void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0) {
+ nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
+ return;
+ }
+
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
+ NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_CONFIG1, NFC_CE);
+}
+
+/* Init external chip select logic on ADS5121 board */
+static int ads5121_chipselect_init(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ struct device_node *dn;
+
+ dn = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld");
+ if (dn) {
+ prv->csreg = of_iomap(dn, 0);
+ of_node_put(dn);
+ if (!prv->csreg)
+ return -ENOMEM;
+
+ /* CPLD Register 9 controls NAND /CE Lines */
+ prv->csreg += 9;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* Control chips select signal on ADS5121 board */
+static void ads5121_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ u8 v;
+
+ v = in_8(prv->csreg);
+ v |= 0x0F;
+
+ if (chip >= 0) {
+ mpc5121_nfc_select_chip(mtd, 0);
+ v &= ~(1 << chip);
+ } else
+ mpc5121_nfc_select_chip(mtd, -1);
+
+ out_8(prv->csreg, v);
+}
+
+/* Read NAND Ready/Busy signal */
+static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles ready/busy signal internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+/* Write command to NAND flash */
+static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ prv->column = (column >= 0) ? column : 0;
+ prv->spareonly = 0;
+
+ switch (command) {
+ case NAND_CMD_PAGEPROG:
+ mpc5121_nfc_send_prog_page(mtd);
+ break;
+ /*
+ * NFC does not support sub-page reads and writes,
+ * so emulate them using full page transfers.
+ */
+ case NAND_CMD_READ0:
+ column = 0;
+ break;
+
+ case NAND_CMD_READ1:
+ prv->column += 256;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_READOOB:
+ prv->spareonly = 1;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_SEQIN:
+ mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
+ column = 0;
+ break;
+
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_READID:
+ case NAND_CMD_STATUS:
+ break;
+
+ default:
+ return;
+ }
+
+ mpc5121_nfc_send_cmd(mtd, command);
+ mpc5121_nfc_addr_cycle(mtd, column, page);
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
+ mpc5121_nfc_send_read_page(mtd);
+ break;
+
+ case NAND_CMD_READID:
+ mpc5121_nfc_send_read_id(mtd);
+ break;
+
+ case NAND_CMD_STATUS:
+ mpc5121_nfc_send_read_status(mtd);
+ if (chip->options & NAND_BUSWIDTH_16)
+ prv->column = 1;
+ else
+ prv->column = 0;
+ break;
+ }
+}
+
+/* Copy data from/to NFC spare buffers. */
+static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
+ u8 *buffer, uint size, int wr)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ uint o, s, sbsize, blksize;
+
+ /*
+ * NAND spare area is available through NFC spare buffers.
+ * The NFC divides spare area into (page_size / 512) chunks.
+ * Each chunk is placed into separate spare memory area, using
+ * first (spare_size / num_of_chunks) bytes of the buffer.
+ *
+ * For NAND device in which the spare area is not divided fully
+ * by the number of chunks, number of used bytes in each spare
+ * buffer is rounded down to the nearest even number of bytes,
+ * and all remaining bytes are added to the last used spare area.
+ *
+ * For more information read section 26.6.10 of MPC5121e
+ * Microcontroller Reference Manual, Rev. 3.
+ */
+
+ /* Calculate number of valid bytes in each spare buffer */
+ sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
+
+ while (size) {
+ /* Calculate spare buffer number */
+ s = offset / sbsize;
+ if (s > NFC_SPARE_BUFFERS - 1)
+ s = NFC_SPARE_BUFFERS - 1;
+
+ /*
+ * Calculate offset to requested data block in selected spare
+ * buffer and its size.
+ */
+ o = offset - (s * sbsize);
+ blksize = min(sbsize - o, size);
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
+ buffer, blksize);
+ else
+ memcpy_fromio(buffer,
+ prv->regs + NFC_SPARE_AREA(s) + o, blksize);
+
+ buffer += blksize;
+ offset += blksize;
+ size -= blksize;
+ };
+}
+
+/* Copy data from/to NFC main and spare buffers */
+static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char *buf, int len,
+ int wr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ uint c = prv->column;
+ uint l;
+
+ /* Handle spare area access */
+ if (prv->spareonly || c >= mtd->writesize) {
+ /* Calculate offset from beginning of spare area */
+ if (c >= mtd->writesize)
+ c -= mtd->writesize;
+
+ prv->column += len;
+ mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
+ return;
+ }
+
+ /*
+ * Handle main area access - limit copy length to prevent
+ * crossing main/spare boundary.
+ */
+ l = min((uint)len, mtd->writesize - c);
+ prv->column += l;
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
+ else
+ memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
+
+ /* Handle crossing main/spare boundary */
+ if (l != len) {
+ buf += l;
+ len -= l;
+ mpc5121_nfc_buf_copy(mtd, buf, len, wr);
+ }
+}
+
+/* Read data from NFC buffers */
+static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, buf, len, 0);
+}
+
+/* Write data to NFC buffers */
+static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
+}
+
+/* Compare buffer with NAND flash */
+static int mpc5121_nfc_verify_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ u_char tmp[256];
+ uint bsize;
+
+ while (len) {
+ bsize = min(len, 256);
+ mpc5121_nfc_read_buf(mtd, tmp, bsize);
+
+ if (memcmp(buf, tmp, bsize))
+ return 1;
+
+ buf += bsize;
+ len -= bsize;
+ }
+
+ return 0;
+}
+
+/* Read byte from NFC buffers */
+static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
+{
+ u8 tmp;
+
+ mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+
+ mpc5121_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/*
+ * Read NFC configuration from Reset Config Word
+ *
+ * NFC is configured during reset in basis of information stored
+ * in Reset Config Word. There is no other way to set NAND block
+ * size, spare size and bus width.
+ */
+static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ struct mpc512x_reset_module *rm;
+ struct device_node *rmnode;
+ uint rcw_pagesize = 0;
+ uint rcw_sparesize = 0;
+ uint rcw_width;
+ uint rcwh;
+ uint romloc, ps;
+
+ rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+ if (!rmnode) {
+ dev_err(prv->dev, "Missing 'fsl,mpc5121-reset' "
+ "node in device tree!\n");
+ return -ENODEV;
+ }
+
+ rm = of_iomap(rmnode, 0);
+ if (!rm) {
+ dev_err(prv->dev, "Error mapping reset module node!\n");
+ return -EBUSY;
+ }
+
+ rcwh = in_be32(&rm->rcwhr);
+
+ /* Bit 6: NFC bus width */
+ rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
+
+ /* Bit 7: NFC Page/Spare size */
+ ps = (rcwh >> 7) & 0x1;
+
+ /* Bits [22:21]: ROM Location */
+ romloc = (rcwh >> 21) & 0x3;
+
+ /* Decode RCW bits */
+ switch ((ps << 2) | romloc) {
+ case 0x00:
+ case 0x01:
+ rcw_pagesize = 512;
+ rcw_sparesize = 16;
+ break;
+ case 0x02:
+ case 0x03:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 128;
+ break;
+ case 0x04:
+ case 0x05:
+ rcw_pagesize = 2048;
+ rcw_sparesize = 64;
+ break;
+ case 0x06:
+ case 0x07:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 218;
+ break;
+ }
+
+ mtd->writesize = rcw_pagesize;
+ mtd->oobsize = rcw_sparesize;
+ if (rcw_width == 2)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ dev_notice(prv->dev, "Configured for "
+ "%u-bit NAND, page size %u "
+ "with %u spare.\n",
+ rcw_width * 8, rcw_pagesize,
+ rcw_sparesize);
+ iounmap(rm);
+ of_node_put(rmnode);
+ return 0;
+}
+
+/* Free driver resources */
+static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ if (prv->clk) {
+ clk_disable(prv->clk);
+ clk_put(prv->clk);
+ }
+
+ if (prv->csreg)
+ iounmap(prv->csreg);
+}
+
+static int __devinit mpc5121_nfc_probe(struct of_device *op,
+ const struct of_device_id *match)
+{
+ struct device_node *rootnode, *dn = op->node;
+ struct device *dev = &op->dev;
+ struct mpc5121_nfc_prv *prv;
+ struct resource res;
+ struct mtd_info *mtd;
+#ifdef CONFIG_MTD_PARTITIONS
+ struct mtd_partition *parts;
+#endif
+ struct nand_chip *chip;
+ unsigned long regs_paddr, regs_size;
+ const uint *chips_no;
+ int resettime = 0;
+ int retval = 0;
+ int rev, len;
+
+ /*
+ * Check SoC revision. This driver supports only NFC
+ * in MPC5121 revision 2 and MPC5123 revision 3.
+ */
+ rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
+ if ((rev != 2) && (rev != 3)) {
+ dev_err(dev, "SoC revision %u is not supported!\n", rev);
+ return -ENXIO;
+ }
+
+ prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
+ if (!prv) {
+ dev_err(dev, "Memory exhausted!\n");
+ return -ENOMEM;
+ }
+
+ mtd = &prv->mtd;
+ chip = &prv->chip;
+
+ mtd->priv = chip;
+ chip->priv = prv;
+ prv->dev = dev;
+
+ /* Read NFC configuration from Reset Config Word */
+ retval = mpc5121_nfc_read_hw_config(mtd);
+ if (retval) {
+ dev_err(dev, "Unable to read NFC config!\n");
+ return retval;
+ }
+
+ prv->irq = irq_of_parse_and_map(dn, 0);
+ if (prv->irq == NO_IRQ) {
+ dev_err(dev, "Error mapping IRQ!\n");
+ return -EINVAL;
+ }
+
+ retval = of_address_to_resource(dn, 0, &res);
+ if (retval) {
+ dev_err(dev, "Error parsing memory region!\n");
+ return retval;
+ }
+
+ chips_no = of_get_property(dn, "chips", &len);
+ if (!chips_no || len != sizeof(*chips_no)) {
+ dev_err(dev, "Invalid/missing 'chips' property!\n");
+ return -EINVAL;
+ }
+
+ regs_paddr = res.start;
+ regs_size = res.end - res.start + 1;
+
+ if (!devm_request_mem_region(dev, regs_paddr, regs_size, DRV_NAME)) {
+ dev_err(dev, "Error requesting memory region!\n");
+ return -EBUSY;
+ }
+
+ prv->regs = devm_ioremap(dev, regs_paddr, regs_size);
+ if (!prv->regs) {
+ dev_err(dev, "Error mapping memory region!\n");
+ return -ENOMEM;
+ }
+
+ mtd->name = "MPC5121 NAND";
+ chip->dev_ready = mpc5121_nfc_dev_ready;
+ chip->cmdfunc = mpc5121_nfc_command;
+ chip->read_byte = mpc5121_nfc_read_byte;
+ chip->read_word = mpc5121_nfc_read_word;
+ chip->read_buf = mpc5121_nfc_read_buf;
+ chip->write_buf = mpc5121_nfc_write_buf;
+ chip->verify_buf = mpc5121_nfc_verify_buf;
+ chip->select_chip = mpc5121_nfc_select_chip;
+ chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ /* Support external chip-select logic on ADS5121 board */
+ rootnode = of_find_node_by_path("/");
+ if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
+ retval = ads5121_chipselect_init(mtd);
+ if (retval) {
+ dev_err(dev, "Chipselect init error!\n");
+ of_node_put(rootnode);
+ return retval;
+ }
+
+ chip->select_chip = ads5121_select_chip;
+ }
+ of_node_put(rootnode);
+
+ /* Enable NFC clock */
+ prv->clk = clk_get(dev, "nfc_clk");
+ if (!prv->clk) {
+ dev_err(dev, "Unable to acquire NFC clock!\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+ clk_enable(prv->clk);
+
+ /* Reset NAND Flash controller */
+ nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
+ while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
+ if (resettime++ >= NFC_RESET_TIMEOUT) {
+ dev_err(dev, "Timeout while resetting NFC!\n");
+ retval = -EINVAL;
+ goto error;
+ }
+
+ udelay(1);
+ }
+
+ /* Enable write to NFC memory */
+ nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
+
+ /* Enable write to all NAND pages */
+ nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
+ nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
+ nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
+
+ /*
+ * Setup NFC:
+ * - Big Endian transfers,
+ * - Interrupt after full page read/write.
+ */
+ nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
+ NFC_FULL_PAGE_INT);
+
+ /* Set spare area size */
+ nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
+
+ init_waitqueue_head(&prv->irq_waitq);
+ retval = devm_request_irq(dev, prv->irq, &mpc5121_nfc_irq, 0, DRV_NAME,
+ mtd);
+ if (retval) {
+ dev_err(dev, "Error requesting IRQ!\n");
+ goto error;
+ }
+
+ /* Detect NAND chips */
+ if (nand_scan(mtd, *chips_no)) {
+ dev_err(dev, "NAND Flash not found !\n");
+ devm_free_irq(dev, prv->irq, mtd);
+ retval = -ENXIO;
+ goto error;
+ }
+
+ /* Set erase block size */
+ switch (mtd->erasesize / mtd->writesize) {
+ case 32:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
+ break;
+
+ case 64:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
+ break;
+
+ case 128:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
+ break;
+
+ case 256:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
+ break;
+
+ default:
+ dev_err(dev, "Unsupported NAND flash!\n");
+ devm_free_irq(dev, prv->irq, mtd);
+ retval = -ENXIO;
+ goto error;
+ }
+
+ dev_set_drvdata(dev, mtd);
+
+ /* Register device in MTD */
+#ifdef CONFIG_MTD_PARTITIONS
+ retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0);
+#ifdef CONFIG_MTD_OF_PARTS
+ if (retval == 0)
+ retval = of_mtd_parse_partitions(dev, dn, &parts);
+#endif
+ if (retval < 0) {
+ dev_err(dev, "Error parsing MTD partitions!\n");
+ devm_free_irq(dev, prv->irq, mtd);
+ retval = -EINVAL;
+ goto error;
+ }
+
+ if (retval > 0)
+ retval = add_mtd_partitions(mtd, parts, retval);
+ else
+#endif
+ retval = add_mtd_device(mtd);
+
+ if (retval) {
+ dev_err(dev, "Error adding MTD device!\n");
+ devm_free_irq(dev, prv->irq, mtd);
+ goto error;
+ }
+
+ return 0;
+error:
+ mpc5121_nfc_free(dev, mtd);
+ return retval;
+}
+
+static int __devexit mpc5121_nfc_remove(struct of_device *op)
+{
+ struct device *dev = &op->dev;
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ nand_release(mtd);
+ devm_free_irq(dev, prv->irq, mtd);
+ mpc5121_nfc_free(dev, mtd);
+
+ return 0;
+}
+
+static struct of_device_id mpc5121_nfc_match[] __devinitdata = {
+ { .compatible = "fsl,mpc5121-nfc", },
+ {},
+};
+
+static struct of_platform_driver mpc5121_nfc_driver = {
+ .match_table = mpc5121_nfc_match,
+ .probe = mpc5121_nfc_probe,
+ .remove = __devexit_p(mpc5121_nfc_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mpc5121_nfc_init(void)
+{
+ return of_register_platform_driver(&mpc5121_nfc_driver);
+}
+
+module_init(mpc5121_nfc_init);
+
+static void __exit mpc5121_nfc_cleanup(void)
+{
+ of_unregister_platform_driver(&mpc5121_nfc_driver);
+}
+
+module_exit(mpc5121_nfc_cleanup);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b2900d8406d3..82e94389824e 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -38,7 +38,7 @@
#define DRIVER_NAME "mxc_nand"
#define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35())
-#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27())
+#define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21())
/* Addresses for NFC registers */
#define NFC_BUF_SIZE 0xE00
@@ -168,11 +168,7 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
{
struct mxc_nand_host *host = dev_id;
- uint16_t tmp;
-
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_INT_MSK; /* Disable interrupt */
- writew(tmp, host->regs + NFC_CONFIG1);
+ disable_irq_nosync(irq);
wake_up(&host->irq_waitq);
@@ -184,15 +180,13 @@ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
*/
static void wait_op_done(struct mxc_nand_host *host, int useirq)
{
- uint32_t tmp;
- int max_retries = 2000;
+ uint16_t tmp;
+ int max_retries = 8000;
if (useirq) {
if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_INT_MSK; /* Enable interrupt */
- writew(tmp, host->regs + NFC_CONFIG1);
+ enable_irq(host->irq);
wait_event(host->irq_waitq,
readw(host->regs + NFC_CONFIG2) & NFC_INT);
@@ -226,8 +220,23 @@ static void send_cmd(struct mxc_nand_host *host, uint16_t cmd, int useirq)
writew(cmd, host->regs + NFC_FLASH_CMD);
writew(NFC_CMD, host->regs + NFC_CONFIG2);
- /* Wait for operation to complete */
- wait_op_done(host, useirq);
+ if (cpu_is_mx21() && (cmd == NAND_CMD_RESET)) {
+ int max_retries = 100;
+ /* Reset completion is indicated by NFC_CONFIG2 */
+ /* being set to 0 */
+ while (max_retries-- > 0) {
+ if (readw(host->regs + NFC_CONFIG2) == 0) {
+ break;
+ }
+ udelay(1);
+ }
+ if (max_retries < 0)
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: RESET failed\n",
+ __func__);
+ } else {
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+ }
}
/* This function sends an address (or partial address) to the
@@ -542,6 +551,41 @@ static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
}
}
+static void preset(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t tmp;
+
+ /* enable interrupt, disable spare enable */
+ tmp = readw(host->regs + NFC_CONFIG1);
+ tmp &= ~NFC_INT_MSK;
+ tmp &= ~NFC_SP_EN;
+ if (nand_chip->ecc.mode == NAND_ECC_HW) {
+ tmp |= NFC_ECC_EN;
+ } else {
+ tmp &= ~NFC_ECC_EN;
+ }
+ writew(tmp, host->regs + NFC_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, host->regs + NFC_CONFIG);
+
+ /* Blocks to be unlocked */
+ if (nfc_is_v21()) {
+ writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
+ writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
+ } else if (nfc_is_v1()) {
+ writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
+ } else
+ BUG();
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, host->regs + NFC_WRPROT);
+}
+
/* Used by the upper layer to write command to NAND Flash for
* different operations to be carried out on NAND Flash */
static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
@@ -559,6 +603,10 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
/* Command pre-processing step */
switch (command) {
+ case NAND_CMD_RESET:
+ send_cmd(host, command, false);
+ preset(mtd);
+ break;
case NAND_CMD_STATUS:
host->buf_start = 0;
@@ -679,7 +727,6 @@ static int __init mxcnd_probe(struct platform_device *pdev)
struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
struct mxc_nand_host *host;
struct resource *res;
- uint16_t tmp;
int err = 0, nr_parts = 0;
struct nand_ecclayout *oob_smallpage, *oob_largepage;
@@ -743,51 +790,17 @@ static int __init mxcnd_probe(struct platform_device *pdev)
host->spare_len = 64;
oob_smallpage = &nandv2_hw_eccoob_smallpage;
oob_largepage = &nandv2_hw_eccoob_largepage;
+ this->ecc.bytes = 9;
} else if (nfc_is_v1()) {
host->regs = host->base;
host->spare0 = host->base + 0x800;
host->spare_len = 16;
oob_smallpage = &nandv1_hw_eccoob_smallpage;
oob_largepage = &nandv1_hw_eccoob_largepage;
- } else
- BUG();
-
- /* disable interrupt and spare enable */
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_INT_MSK;
- tmp &= ~NFC_SP_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
-
- init_waitqueue_head(&host->irq_waitq);
-
- host->irq = platform_get_irq(pdev, 0);
-
- err = request_irq(host->irq, mxc_nfc_irq, 0, DRIVER_NAME, host);
- if (err)
- goto eirq;
-
- /* Reset NAND */
- this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-
- /* preset operation */
- /* Unlock the internal RAM Buffer */
- writew(0x2, host->regs + NFC_CONFIG);
-
- /* Blocks to be unlocked */
- if (nfc_is_v21()) {
- writew(0x0, host->regs + NFC_V21_UNLOCKSTART_BLKADDR);
- writew(0xffff, host->regs + NFC_V21_UNLOCKEND_BLKADDR);
- this->ecc.bytes = 9;
- } else if (nfc_is_v1()) {
- writew(0x0, host->regs + NFC_V1_UNLOCKSTART_BLKADDR);
- writew(0x4000, host->regs + NFC_V1_UNLOCKEND_BLKADDR);
this->ecc.bytes = 3;
} else
BUG();
- /* Unlock Block Command for given address range */
- writew(0x4, host->regs + NFC_WRPROT);
-
this->ecc.size = 512;
this->ecc.layout = oob_smallpage;
@@ -796,14 +809,8 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
this->ecc.mode = NAND_ECC_HW;
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp |= NFC_ECC_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
} else {
this->ecc.mode = NAND_ECC_SOFT;
- tmp = readw(host->regs + NFC_CONFIG1);
- tmp &= ~NFC_ECC_EN;
- writew(tmp, host->regs + NFC_CONFIG1);
}
/* NAND bus width determines access funtions used by upper layer */
@@ -817,8 +824,16 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->options |= NAND_USE_FLASH_BBT;
}
+ init_waitqueue_head(&host->irq_waitq);
+
+ host->irq = platform_get_irq(pdev, 0);
+
+ err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host);
+ if (err)
+ goto eirq;
+
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, 1)) {
+ if (nand_scan_ident(mtd, 1, NULL)) {
err = -ENXIO;
goto escan;
}
@@ -886,11 +901,14 @@ static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (mtd) {
- ret = mtd->suspend(mtd);
- /* Disable the NFC clock */
- clk_disable(host->clk);
- }
+
+ ret = mtd->suspend(mtd);
+
+ /*
+ * nand_suspend locks the device for exclusive access, so
+ * the clock must already be off.
+ */
+ BUG_ON(!ret && host->clk_act);
return ret;
}
@@ -904,11 +922,7 @@ static int mxcnd_resume(struct platform_device *pdev)
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- if (mtd) {
- /* Enable the NFC clock */
- clk_enable(host->clk);
- mtd->resume(mtd);
- }
+ mtd->resume(mtd);
return ret;
}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8f2958fe2148..4a7b86423ee9 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -108,6 +108,35 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
*/
DEFINE_LED_TRIGGER(nand_led_trigger);
+static int check_offs_len(struct mtd_info *mtd,
+ loff_t ofs, uint64_t len)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret = 0;
+
+ /* Start address must align on block boundary */
+ if (ofs & ((1 << chip->phys_erase_shift) - 1)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ ret = -EINVAL;
+ }
+
+ /* Length must align on block boundary */
+ if (len & ((1 << chip->phys_erase_shift) - 1)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
+ __func__);
+ ret = -EINVAL;
+ }
+
+ /* Do not allow past end of device */
+ if (ofs + len > mtd->size) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Past end of device\n",
+ __func__);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
@@ -318,6 +347,9 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
struct nand_chip *chip = mtd->priv;
u16 bad;
+ if (chip->options & NAND_BB_LAST_PAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+
page = (int)(ofs >> chip->page_shift) & chip->pagemask;
if (getchip) {
@@ -335,14 +367,18 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
bad = cpu_to_le16(chip->read_word(mtd));
if (chip->badblockpos & 0x1)
bad >>= 8;
- if ((bad & 0xFF) != 0xff)
- res = 1;
+ else
+ bad &= 0xFF;
} else {
chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
- if (chip->read_byte(mtd) != 0xff)
- res = 1;
+ bad = chip->read_byte(mtd);
}
+ if (likely(chip->badblockbits == 8))
+ res = bad != 0xFF;
+ else
+ res = hweight8(bad) < chip->badblockbits;
+
if (getchip)
nand_release_device(mtd);
@@ -363,6 +399,9 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
uint8_t buf[2] = { 0, 0 };
int block, ret;
+ if (chip->options & NAND_BB_LAST_PAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+
/* Get block number */
block = (int)(ofs >> chip->bbt_erase_shift);
if (chip->bbt)
@@ -401,6 +440,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
static int nand_check_wp(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
+
+ /* broken xD cards report WP despite being writable */
+ if (chip->options & NAND_BROKEN_XD)
+ return 0;
+
/* Check the WP bit */
chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
@@ -744,9 +788,6 @@ nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
chip->state = FL_PM_SUSPENDED;
spin_unlock(lock);
return 0;
- } else {
- spin_unlock(lock);
- return -EAGAIN;
}
}
set_current_state(TASK_UNINTERRUPTIBLE);
@@ -835,6 +876,168 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
}
/**
+ * __nand_unlock - [REPLACABLE] unlocks specified locked blockes
+ *
+ * @param mtd - mtd info
+ * @param ofs - offset to start unlock from
+ * @param len - length to unlock
+ * @invert - when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * whne = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
+ *
+ * @return - unlock status
+ */
+static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len, int invert)
+{
+ int ret = 0;
+ int status, page;
+ struct nand_chip *chip = mtd->priv;
+
+ /* Submit address of first page to unlock */
+ page = ofs >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
+
+ /* Submit address of last page to unlock */
+ page = (ofs + len) >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
+ (page | invert) & chip->pagemask);
+
+ /* Call wait ready function */
+ status = chip->waitfunc(mtd, chip);
+ udelay(1000);
+ /* See if device thinks it succeeded */
+ if (status & 0x01) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ __func__, status);
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/**
+ * nand_unlock - [REPLACABLE] unlocks specified locked blockes
+ *
+ * @param mtd - mtd info
+ * @param ofs - offset to start unlock from
+ * @param len - length to unlock
+ *
+ * @return - unlock status
+ */
+int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret = 0;
+ int chipnr;
+ struct nand_chip *chip = mtd->priv;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+
+ if (check_offs_len(mtd, ofs, len))
+ ret = -EINVAL;
+
+ /* Align to last block address if size addresses end of the device */
+ if (ofs + len == mtd->size)
+ len -= mtd->erasesize;
+
+ nand_get_device(chip, mtd, FL_UNLOCKING);
+
+ /* Shift to get chip number */
+ chipnr = ofs >> chip->chip_shift;
+
+ chip->select_chip(mtd, chipnr);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ __func__);
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = __nand_unlock(mtd, ofs, len, 0);
+
+out:
+ /* de-select the NAND device */
+ chip->select_chip(mtd, -1);
+
+ nand_release_device(mtd);
+
+ return ret;
+}
+
+/**
+ * nand_lock - [REPLACABLE] locks all blockes present in the device
+ *
+ * @param mtd - mtd info
+ * @param ofs - offset to start unlock from
+ * @param len - length to unlock
+ *
+ * @return - lock status
+ *
+ * This feature is not support in many NAND parts. 'Micron' NAND parts
+ * do have this feature, but it allows only to lock all blocks not for
+ * specified range for block.
+ *
+ * Implementing 'lock' feature by making use of 'unlock', for now.
+ */
+int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret = 0;
+ int chipnr, status, page;
+ struct nand_chip *chip = mtd->priv;
+
+ DEBUG(MTD_DEBUG_LEVEL3, "%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+
+ if (check_offs_len(mtd, ofs, len))
+ ret = -EINVAL;
+
+ nand_get_device(chip, mtd, FL_LOCKING);
+
+ /* Shift to get chip number */
+ chipnr = ofs >> chip->chip_shift;
+
+ chip->select_chip(mtd, chipnr);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Device is write protected!!!\n",
+ __func__);
+ status = MTD_ERASE_FAILED;
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Submit address of first page to lock */
+ page = ofs >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
+
+ /* Call wait ready function */
+ status = chip->waitfunc(mtd, chip);
+ udelay(1000);
+ /* See if device thinks it succeeded */
+ if (status & 0x01) {
+ DEBUG(MTD_DEBUG_LEVEL0, "%s: Error status = 0x%08x\n",
+ __func__, status);
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = __nand_unlock(mtd, ofs, len, 0x1);
+
+out:
+ /* de-select the NAND device */
+ chip->select_chip(mtd, -1);
+
+ nand_release_device(mtd);
+
+ return ret;
+}
+
+/**
* nand_read_page_raw - [Intern] read raw page data without ecc
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -1232,6 +1435,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
int ret = 0;
uint32_t readlen = ops->len;
uint32_t oobreadlen = ops->ooblen;
+ uint32_t max_oobsize = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *bufpoi, *oob, *buf;
stats = mtd->ecc_stats;
@@ -1282,18 +1488,14 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
buf += bytes;
if (unlikely(oob)) {
- /* Raw mode does data:oob:data:oob */
- if (ops->mode != MTD_OOB_RAW) {
- int toread = min(oobreadlen,
- chip->ecc.layout->oobavail);
- if (toread) {
- oob = nand_transfer_oob(chip,
- oob, ops, toread);
- oobreadlen -= toread;
- }
- } else
- buf = nand_transfer_oob(chip,
- buf, ops, mtd->oobsize);
+
+ int toread = min(oobreadlen, max_oobsize);
+
+ if (toread) {
+ oob = nand_transfer_oob(chip,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
}
if (!(chip->options & NAND_NO_READRDY)) {
@@ -1880,11 +2082,9 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
* @oob: oob data buffer
* @ops: oob ops structure
*/
-static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob,
- struct mtd_oob_ops *ops)
+static uint8_t *nand_fill_oob(struct nand_chip *chip, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
{
- size_t len = ops->ooblen;
-
switch(ops->mode) {
case MTD_OOB_PLACE:
@@ -1939,6 +2139,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
int chipnr, realpage, page, blockmask, column;
struct nand_chip *chip = mtd->priv;
uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+ uint32_t oobmaxlen = ops->mode == MTD_OOB_AUTO ?
+ mtd->oobavail : mtd->oobsize;
+
uint8_t *oob = ops->oobbuf;
uint8_t *buf = ops->datbuf;
int ret, subpage;
@@ -1980,6 +2185,10 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (likely(!oob))
memset(chip->oob_poi, 0xff, mtd->oobsize);
+ /* Don't allow multipage oob writes with offset */
+ if (ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen))
+ return -EINVAL;
+
while(1) {
int bytes = mtd->writesize;
int cached = writelen > bytes && page != blockmask;
@@ -1995,8 +2204,11 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
wbuf = chip->buffers->databuf;
}
- if (unlikely(oob))
- oob = nand_fill_oob(chip, oob, ops);
+ if (unlikely(oob)) {
+ size_t len = min(oobwritelen, oobmaxlen);
+ oob = nand_fill_oob(chip, oob, len, ops);
+ oobwritelen -= len;
+ }
ret = chip->write_page(mtd, chip, wbuf, page, cached,
(ops->mode == MTD_OOB_RAW));
@@ -2170,7 +2382,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
chip->pagebuf = -1;
memset(chip->oob_poi, 0xff, mtd->oobsize);
- nand_fill_oob(chip, ops->oobbuf, ops);
+ nand_fill_oob(chip, ops->oobbuf, ops->ooblen, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
memset(chip->oob_poi, 0xff, mtd->oobsize);
@@ -2293,25 +2505,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
__func__, (unsigned long long)instr->addr,
(unsigned long long)instr->len);
- /* Start address must align on block boundary */
- if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Unaligned address\n", __func__);
+ if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
- }
-
- /* Length must align on block boundary */
- if (instr->len & ((1 << chip->phys_erase_shift) - 1)) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Length not block aligned\n",
- __func__);
- return -EINVAL;
- }
-
- /* Do not allow erase past end of device */
- if ((instr->len + instr->addr) > mtd->size) {
- DEBUG(MTD_DEBUG_LEVEL0, "%s: Erase past end of device\n",
- __func__);
- return -EINVAL;
- }
instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
@@ -2582,11 +2777,11 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw, int *maf_id)
+ int busw, int *maf_id,
+ struct nand_flash_dev *type)
{
- struct nand_flash_dev *type = NULL;
int i, dev_id, maf_idx;
- int tmp_id, tmp_manf;
+ u8 id_data[8];
/* Select the device */
chip->select_chip(mtd, 0);
@@ -2612,27 +2807,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
- /* Read manufacturer and device IDs */
+ /* Read entire ID string */
- tmp_manf = chip->read_byte(mtd);
- tmp_id = chip->read_byte(mtd);
+ for (i = 0; i < 8; i++)
+ id_data[i] = chip->read_byte(mtd);
- if (tmp_manf != *maf_id || tmp_id != dev_id) {
+ if (id_data[0] != *maf_id || id_data[1] != dev_id) {
printk(KERN_INFO "%s: second ID read did not match "
"%02x,%02x against %02x,%02x\n", __func__,
- *maf_id, dev_id, tmp_manf, tmp_id);
+ *maf_id, dev_id, id_data[0], id_data[1]);
return ERR_PTR(-ENODEV);
}
- /* Lookup the flash id */
- for (i = 0; nand_flash_ids[i].name != NULL; i++) {
- if (dev_id == nand_flash_ids[i].id) {
- type = &nand_flash_ids[i];
- break;
- }
- }
-
if (!type)
+ type = nand_flash_ids;
+
+ for (; type->name != NULL; type++)
+ if (dev_id == type->id)
+ break;
+
+ if (!type->name)
return ERR_PTR(-ENODEV);
if (!mtd->name)
@@ -2644,21 +2838,45 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (!type->pagesize) {
int extid;
/* The 3rd id byte holds MLC / multichip data */
- chip->cellinfo = chip->read_byte(mtd);
+ chip->cellinfo = id_data[2];
/* The 4th id byte is the important one */
- extid = chip->read_byte(mtd);
- /* Calc pagesize */
- mtd->writesize = 1024 << (extid & 0x3);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ extid = id_data[3];
+ /*
+ * Field definitions are in the following datasheets:
+ * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+ * New style (6 byte ID): Samsung K9GAG08U0D (p.40)
+ *
+ * Check for wraparound + Samsung ID + nonzero 6th byte
+ * to decide what to do.
+ */
+ if (id_data[0] == id_data[6] && id_data[1] == id_data[7] &&
+ id_data[0] == NAND_MFR_SAMSUNG &&
+ id_data[5] != 0x00) {
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (extid & 0x03) == 0x01 ? 128 : 218;
+ extid >>= 2;
+ /* Calc blocksize */
+ mtd->erasesize = (128 * 1024) <<
+ (((extid >> 1) & 0x04) | (extid & 0x03));
+ busw = 0;
+ } else {
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) *
+ (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+ }
} else {
/*
* Old devices have chip data hardcoded in the device id table
@@ -2704,6 +2922,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
/* Set the bad block position */
chip->badblockpos = mtd->writesize > 512 ?
NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
+ chip->badblockbits = 8;
/* Get chip options, preserve non chip based options */
chip->options &= ~NAND_CHIPOPTIONS_MSK;
@@ -2720,6 +2939,15 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ /*
+ * Bad block marker is stored in the last page of each block
+ * on Samsung and Hynix MLC devices
+ */
+ if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) &&
+ (*maf_id == NAND_MFR_SAMSUNG ||
+ *maf_id == NAND_MFR_HYNIX))
+ chip->options |= NAND_BB_LAST_PAGE;
+
/* Check for AND chips with 4 page planes */
if (chip->options & NAND_4PAGE_ARRAY)
chip->erase_cmd = multi_erase_cmd;
@@ -2741,13 +2969,15 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
* nand_scan_ident - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
* @maxchips: Number of chips to scan for
+ * @table: Alternative NAND ID table
*
* This is the first phase of the normal nand_scan() function. It
* reads the flash ID and sets up MTD fields accordingly.
*
* The mtd->owner field must be set to the module of the caller.
*/
-int nand_scan_ident(struct mtd_info *mtd, int maxchips)
+int nand_scan_ident(struct mtd_info *mtd, int maxchips,
+ struct nand_flash_dev *table)
{
int i, busw, nand_maf_id;
struct nand_chip *chip = mtd->priv;
@@ -2759,7 +2989,7 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips)
nand_set_defaults(chip, busw);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id);
+ type = nand_get_flash_type(mtd, chip, busw, &nand_maf_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
@@ -2989,7 +3219,8 @@ int nand_scan_tail(struct mtd_info *mtd)
/* Fill in remaining MTD driver data */
mtd->type = MTD_NANDFLASH;
- mtd->flags = MTD_CAP_NANDFLASH;
+ mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
+ MTD_CAP_NANDFLASH;
mtd->erase = nand_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
@@ -3050,7 +3281,7 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
BUG();
}
- ret = nand_scan_ident(mtd, maxchips);
+ ret = nand_scan_ident(mtd, maxchips, NULL);
if (!ret)
ret = nand_scan_tail(mtd);
return ret;
@@ -3077,6 +3308,8 @@ void nand_release(struct mtd_info *mtd)
kfree(chip->buffers);
}
+EXPORT_SYMBOL_GPL(nand_lock);
+EXPORT_SYMBOL_GPL(nand_unlock);
EXPORT_SYMBOL_GPL(nand_scan);
EXPORT_SYMBOL_GPL(nand_scan_ident);
EXPORT_SYMBOL_GPL(nand_scan_tail);
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 55c23e5cd210..ad97c0ce73b2 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -237,15 +237,33 @@ static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
size_t len)
{
struct mtd_oob_ops ops;
+ int res;
ops.mode = MTD_OOB_RAW;
ops.ooboffs = 0;
ops.ooblen = mtd->oobsize;
- ops.oobbuf = buf;
- ops.datbuf = buf;
- ops.len = len;
- return mtd->read_oob(mtd, offs, &ops);
+
+ while (len > 0) {
+ if (len <= mtd->writesize) {
+ ops.oobbuf = buf + len;
+ ops.datbuf = buf;
+ ops.len = len;
+ return mtd->read_oob(mtd, offs, &ops);
+ } else {
+ ops.oobbuf = buf + mtd->writesize;
+ ops.datbuf = buf;
+ ops.len = mtd->writesize;
+ res = mtd->read_oob(mtd, offs, &ops);
+
+ if (res)
+ return res;
+ }
+
+ buf += mtd->oobsize + mtd->writesize;
+ len -= mtd->writesize;
+ }
+ return 0;
}
/*
@@ -414,6 +432,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
from = (loff_t)startblock << (this->bbt_erase_shift - 1);
}
+ if (this->options & NAND_BB_LAST_PAGE)
+ from += mtd->erasesize - (mtd->writesize * len);
+
for (i = startblock; i < numblocks;) {
int ret;
diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h
index 7cec2cd97854..198b304d6f72 100644
--- a/drivers/mtd/nand/nand_bcm_umi.h
+++ b/drivers/mtd/nand/nand_bcm_umi.h
@@ -167,18 +167,27 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
int numToRead = 16; /* There are 16 bytes per sector in the OOB */
/* ECC is already paused when this function is called */
+ if (pageSize != NAND_DATA_ACCESS_SIZE) {
+ /* skip BI */
+#if defined(__KERNEL__) && !defined(STANDALONE)
+ *oobp++ = REG_NAND_DATA8;
+#else
+ REG_NAND_DATA8;
+#endif
+ numToRead--;
+ }
- if (pageSize == NAND_DATA_ACCESS_SIZE) {
- while (numToRead > numEccBytes) {
- /* skip free oob region */
+ while (numToRead > numEccBytes) {
+ /* skip free oob region */
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp++ = REG_NAND_DATA8;
#else
- REG_NAND_DATA8;
+ REG_NAND_DATA8;
#endif
- numToRead--;
- }
+ numToRead--;
+ }
+ if (pageSize == NAND_DATA_ACCESS_SIZE) {
/* read ECC bytes before BI */
nand_bcm_umi_bch_resume_read_ecc_calc();
@@ -190,6 +199,7 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
#else
eccCalc[eccPos++] = REG_NAND_DATA8;
#endif
+ numToRead--;
}
nand_bcm_umi_bch_pause_read_ecc_calc();
@@ -204,49 +214,18 @@ static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize,
numToRead--;
}
- /* read ECC bytes */
- nand_bcm_umi_bch_resume_read_ecc_calc();
- while (numToRead) {
-#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
- eccCalc[eccPos++] = *oobp;
- oobp++;
-#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
-#endif
- numToRead--;
- }
- } else {
- /* skip BI */
+ }
+ /* read ECC bytes */
+ nand_bcm_umi_bch_resume_read_ecc_calc();
+ while (numToRead) {
#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
+ *oobp = REG_NAND_DATA8;
+ eccCalc[eccPos++] = *oobp;
+ oobp++;
#else
- REG_NAND_DATA8;
+ eccCalc[eccPos++] = REG_NAND_DATA8;
#endif
numToRead--;
-
- while (numToRead > numEccBytes) {
- /* skip free oob region */
-#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp++ = REG_NAND_DATA8;
-#else
- REG_NAND_DATA8;
-#endif
- numToRead--;
- }
-
- /* read ECC bytes */
- nand_bcm_umi_bch_resume_read_ecc_calc();
- while (numToRead) {
-#if defined(__KERNEL__) && !defined(STANDALONE)
- *oobp = REG_NAND_DATA8;
- eccCalc[eccPos++] = *oobp;
- oobp++;
-#else
- eccCalc[eccPos++] = REG_NAND_DATA8;
-#endif
- numToRead--;
- }
}
}
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 69ee2c90eb0b..89907ed99009 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -82,6 +82,7 @@ struct nand_flash_dev nand_flash_ids[] = {
/* 1 Gigabit */
{"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0xD1, 0, 128, 0, LP_OPTIONS},
{"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
{"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 7281000fef2d..261337efe0ee 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -80,6 +80,9 @@
#ifndef CONFIG_NANDSIM_DBG
#define CONFIG_NANDSIM_DBG 0
#endif
+#ifndef CONFIG_NANDSIM_MAX_PARTS
+#define CONFIG_NANDSIM_MAX_PARTS 32
+#endif
static uint first_id_byte = CONFIG_NANDSIM_FIRST_ID_BYTE;
static uint second_id_byte = CONFIG_NANDSIM_SECOND_ID_BYTE;
@@ -94,7 +97,7 @@ static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH;
static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
static uint log = CONFIG_NANDSIM_LOG;
static uint dbg = CONFIG_NANDSIM_DBG;
-static unsigned long parts[MAX_MTD_DEVICES];
+static unsigned long parts[CONFIG_NANDSIM_MAX_PARTS];
static unsigned int parts_num;
static char *badblocks = NULL;
static char *weakblocks = NULL;
@@ -135,8 +138,8 @@ MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read I
MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)");
MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
-MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanodeconds)");
-MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanodeconds)");
+MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanoseconds)");
+MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanoseconds)");
MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)");
MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
MODULE_PARM_DESC(log, "Perform logging if not zero");
@@ -288,7 +291,7 @@ union ns_mem {
* The structure which describes all the internal simulator data.
*/
struct nandsim {
- struct mtd_partition partitions[MAX_MTD_DEVICES];
+ struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
unsigned int nbparts;
uint busw; /* flash chip bus width (8 or 16) */
@@ -312,7 +315,7 @@ struct nandsim {
union ns_mem buf;
/* NAND flash "geometry" */
- struct nandsin_geometry {
+ struct {
uint64_t totsz; /* total flash size, bytes */
uint32_t secsz; /* flash sector (erase block) size, bytes */
uint pgsz; /* NAND flash page size, bytes */
@@ -331,7 +334,7 @@ struct nandsim {
} geom;
/* NAND flash internal registers */
- struct nandsim_regs {
+ struct {
unsigned command; /* the command register */
u_char status; /* the status register */
uint row; /* the page number */
@@ -342,7 +345,7 @@ struct nandsim {
} regs;
/* NAND flash lines state */
- struct ns_lines_status {
+ struct {
int ce; /* chip Enable */
int cle; /* command Latch Enable */
int ale; /* address Latch Enable */
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index 1f6f741af5da..8c0b69375224 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -105,21 +105,21 @@ static int nomadik_nand_probe(struct platform_device *pdev)
ret = -EIO;
goto err_unmap;
}
- host->addr_va = ioremap(res->start, res->end - res->start + 1);
+ host->addr_va = ioremap(res->start, resource_size(res));
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
if (!res) {
ret = -EIO;
goto err_unmap;
}
- host->data_va = ioremap(res->start, res->end - res->start + 1);
+ host->data_va = ioremap(res->start, resource_size(res));
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
if (!res) {
ret = -EIO;
goto err_unmap;
}
- host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+ host->cmd_va = ioremap(res->start, resource_size(res));
if (!host->addr_va || !host->data_va || !host->cmd_va) {
ret = -ENOMEM;
diff --git a/drivers/mtd/nand/w90p910_nand.c b/drivers/mtd/nand/nuc900_nand.c
index 7680e731348a..6eddf7361ed7 100644
--- a/drivers/mtd/nand/w90p910_nand.c
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2009 Nuvoton technology corporation.
+ * Copyright © 2009 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
@@ -55,7 +55,7 @@
#define write_addr_reg(dev, val) \
__raw_writel((val), (dev)->reg + REG_SMADDR)
-struct w90p910_nand {
+struct nuc900_nand {
struct mtd_info mtd;
struct nand_chip chip;
void __iomem *reg;
@@ -76,49 +76,49 @@ static const struct mtd_partition partitions[] = {
}
};
-static unsigned char w90p910_nand_read_byte(struct mtd_info *mtd)
+static unsigned char nuc900_nand_read_byte(struct mtd_info *mtd)
{
unsigned char ret;
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
ret = (unsigned char)read_data_reg(nand);
return ret;
}
-static void w90p910_nand_read_buf(struct mtd_info *mtd,
- unsigned char *buf, int len)
+static void nuc900_nand_read_buf(struct mtd_info *mtd,
+ unsigned char *buf, int len)
{
int i;
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
for (i = 0; i < len; i++)
buf[i] = (unsigned char)read_data_reg(nand);
}
-static void w90p910_nand_write_buf(struct mtd_info *mtd,
- const unsigned char *buf, int len)
+static void nuc900_nand_write_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
{
int i;
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
for (i = 0; i < len; i++)
write_data_reg(nand, buf[i]);
}
-static int w90p910_verify_buf(struct mtd_info *mtd,
- const unsigned char *buf, int len)
+static int nuc900_verify_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
{
int i;
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
for (i = 0; i < len; i++) {
if (buf[i] != (unsigned char)read_data_reg(nand))
@@ -128,7 +128,7 @@ static int w90p910_verify_buf(struct mtd_info *mtd,
return 0;
}
-static int w90p910_check_rb(struct w90p910_nand *nand)
+static int nuc900_check_rb(struct nuc900_nand *nand)
{
unsigned int val;
spin_lock(&nand->lock);
@@ -139,24 +139,24 @@ static int w90p910_check_rb(struct w90p910_nand *nand)
return val;
}
-static int w90p910_nand_devready(struct mtd_info *mtd)
+static int nuc900_nand_devready(struct mtd_info *mtd)
{
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
int ready;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
- ready = (w90p910_check_rb(nand)) ? 1 : 0;
+ ready = (nuc900_check_rb(nand)) ? 1 : 0;
return ready;
}
-static void w90p910_nand_command_lp(struct mtd_info *mtd,
- unsigned int command, int column, int page_addr)
+static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
{
register struct nand_chip *chip = mtd->priv;
- struct w90p910_nand *nand;
+ struct nuc900_nand *nand;
- nand = container_of(mtd, struct w90p910_nand, mtd);
+ nand = container_of(mtd, struct nuc900_nand, mtd);
if (command == NAND_CMD_READOOB) {
column += mtd->writesize;
@@ -212,7 +212,7 @@ static void w90p910_nand_command_lp(struct mtd_info *mtd,
write_cmd_reg(nand, NAND_CMD_STATUS);
write_cmd_reg(nand, command);
- while (!w90p910_check_rb(nand))
+ while (!nuc900_check_rb(nand))
;
return;
@@ -241,7 +241,7 @@ static void w90p910_nand_command_lp(struct mtd_info *mtd,
}
-static void w90p910_nand_enable(struct w90p910_nand *nand)
+static void nuc900_nand_enable(struct nuc900_nand *nand)
{
unsigned int val;
spin_lock(&nand->lock);
@@ -262,37 +262,37 @@ static void w90p910_nand_enable(struct w90p910_nand *nand)
spin_unlock(&nand->lock);
}
-static int __devinit w90p910_nand_probe(struct platform_device *pdev)
+static int __devinit nuc900_nand_probe(struct platform_device *pdev)
{
- struct w90p910_nand *w90p910_nand;
+ struct nuc900_nand *nuc900_nand;
struct nand_chip *chip;
int retval;
struct resource *res;
retval = 0;
- w90p910_nand = kzalloc(sizeof(struct w90p910_nand), GFP_KERNEL);
- if (!w90p910_nand)
+ nuc900_nand = kzalloc(sizeof(struct nuc900_nand), GFP_KERNEL);
+ if (!nuc900_nand)
return -ENOMEM;
- chip = &(w90p910_nand->chip);
+ chip = &(nuc900_nand->chip);
- w90p910_nand->mtd.priv = chip;
- w90p910_nand->mtd.owner = THIS_MODULE;
- spin_lock_init(&w90p910_nand->lock);
+ nuc900_nand->mtd.priv = chip;
+ nuc900_nand->mtd.owner = THIS_MODULE;
+ spin_lock_init(&nuc900_nand->lock);
- w90p910_nand->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(w90p910_nand->clk)) {
+ nuc900_nand->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(nuc900_nand->clk)) {
retval = -ENOENT;
goto fail1;
}
- clk_enable(w90p910_nand->clk);
-
- chip->cmdfunc = w90p910_nand_command_lp;
- chip->dev_ready = w90p910_nand_devready;
- chip->read_byte = w90p910_nand_read_byte;
- chip->write_buf = w90p910_nand_write_buf;
- chip->read_buf = w90p910_nand_read_buf;
- chip->verify_buf = w90p910_verify_buf;
+ clk_enable(nuc900_nand->clk);
+
+ chip->cmdfunc = nuc900_nand_command_lp;
+ chip->dev_ready = nuc900_nand_devready;
+ chip->read_byte = nuc900_nand_read_byte;
+ chip->write_buf = nuc900_nand_write_buf;
+ chip->read_buf = nuc900_nand_read_buf;
+ chip->verify_buf = nuc900_verify_buf;
chip->chip_delay = 50;
chip->options = 0;
chip->ecc.mode = NAND_ECC_SOFT;
@@ -308,75 +308,75 @@ static int __devinit w90p910_nand_probe(struct platform_device *pdev)
goto fail1;
}
- w90p910_nand->reg = ioremap(res->start, resource_size(res));
- if (!w90p910_nand->reg) {
+ nuc900_nand->reg = ioremap(res->start, resource_size(res));
+ if (!nuc900_nand->reg) {
retval = -ENOMEM;
goto fail2;
}
- w90p910_nand_enable(w90p910_nand);
+ nuc900_nand_enable(nuc900_nand);
- if (nand_scan(&(w90p910_nand->mtd), 1)) {
+ if (nand_scan(&(nuc900_nand->mtd), 1)) {
retval = -ENXIO;
goto fail3;
}
- add_mtd_partitions(&(w90p910_nand->mtd), partitions,
+ add_mtd_partitions(&(nuc900_nand->mtd), partitions,
ARRAY_SIZE(partitions));
- platform_set_drvdata(pdev, w90p910_nand);
+ platform_set_drvdata(pdev, nuc900_nand);
return retval;
-fail3: iounmap(w90p910_nand->reg);
+fail3: iounmap(nuc900_nand->reg);
fail2: release_mem_region(res->start, resource_size(res));
-fail1: kfree(w90p910_nand);
+fail1: kfree(nuc900_nand);
return retval;
}
-static int __devexit w90p910_nand_remove(struct platform_device *pdev)
+static int __devexit nuc900_nand_remove(struct platform_device *pdev)
{
- struct w90p910_nand *w90p910_nand = platform_get_drvdata(pdev);
+ struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
struct resource *res;
- iounmap(w90p910_nand->reg);
+ iounmap(nuc900_nand->reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
- clk_disable(w90p910_nand->clk);
- clk_put(w90p910_nand->clk);
+ clk_disable(nuc900_nand->clk);
+ clk_put(nuc900_nand->clk);
- kfree(w90p910_nand);
+ kfree(nuc900_nand);
platform_set_drvdata(pdev, NULL);
return 0;
}
-static struct platform_driver w90p910_nand_driver = {
- .probe = w90p910_nand_probe,
- .remove = __devexit_p(w90p910_nand_remove),
+static struct platform_driver nuc900_nand_driver = {
+ .probe = nuc900_nand_probe,
+ .remove = __devexit_p(nuc900_nand_remove),
.driver = {
- .name = "w90p910-fmi",
+ .name = "nuc900-fmi",
.owner = THIS_MODULE,
},
};
-static int __init w90p910_nand_init(void)
+static int __init nuc900_nand_init(void)
{
- return platform_driver_register(&w90p910_nand_driver);
+ return platform_driver_register(&nuc900_nand_driver);
}
-static void __exit w90p910_nand_exit(void)
+static void __exit nuc900_nand_exit(void)
{
- platform_driver_unregister(&w90p910_nand_driver);
+ platform_driver_unregister(&nuc900_nand_driver);
}
-module_init(w90p910_nand_init);
-module_exit(w90p910_nand_exit);
+module_init(nuc900_nand_init);
+module_exit(nuc900_nand_exit);
MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
-MODULE_DESCRIPTION("w90p910 nand driver!");
+MODULE_DESCRIPTION("w90p910/NUC9xx nand driver!");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:w90p910-fmi");
+MODULE_ALIAS("platform:nuc900-fmi");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 7545568fce47..ee87325c7712 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -292,11 +292,14 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
u32 *p = (u32 *)buf;
/* take care of subpage reads */
- for (; len % 4 != 0; ) {
- *buf++ = __raw_readb(info->nand.IO_ADDR_R);
- len--;
+ if (len % 4) {
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len % 4);
+ else
+ omap_read_buf8(mtd, buf, len % 4);
+ p = (u32 *) (buf + len % 4);
+ len -= len % 4;
}
- p = (u32 *) buf;
/* configure and start prefetch transfer */
ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
@@ -502,7 +505,7 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
omap_write_buf_pref(mtd, buf, len);
else
/* start transfer in DMA mode */
- omap_nand_dma_transfer(mtd, buf, len, 0x1);
+ omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
}
/**
@@ -1028,7 +1031,8 @@ out_free_info:
static int omap_nand_remove(struct platform_device *pdev)
{
struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct omap_nand_info *info = mtd->priv;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
platform_set_drvdata(pdev, NULL);
if (use_dma)
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index f59c07427af3..da6e75343052 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -60,7 +60,13 @@ static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
}
buf64 = (uint64_t *)buf;
while (i < len/8) {
- uint64_t x;
+ /*
+ * Since GCC has no proper constraint (PR 43518)
+ * force x variable to r2/r3 registers as ldrd instruction
+ * requires first register to be even.
+ */
+ register uint64_t x asm ("r2");
+
asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
@@ -74,6 +80,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
struct mtd_info *mtd;
struct nand_chip *nc;
struct orion_nand_data *board;
+ struct resource *res;
void __iomem *io_base;
int ret = 0;
#ifdef CONFIG_MTD_PARTITIONS
@@ -89,8 +96,13 @@ static int __init orion_nand_probe(struct platform_device *pdev)
}
mtd = (struct mtd_info *)(nc + 1);
- io_base = ioremap(pdev->resource[0].start,
- pdev->resource[0].end - pdev->resource[0].start + 1);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto no_res;
+ }
+
+ io_base = ioremap(res->start, resource_size(res));
if (!io_base) {
printk(KERN_ERR "orion_nand: ioremap failed\n");
ret = -EIO;
@@ -114,6 +126,9 @@ static int __init orion_nand_probe(struct platform_device *pdev)
if (board->width == 16)
nc->options |= NAND_BUSWIDTH_16;
+ if (board->dev_ready)
+ nc->dev_ready = board->dev_ready;
+
platform_set_drvdata(pdev, mtd);
if (nand_scan(mtd, 1)) {
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index a97e9c95ab6a..f02af24d033a 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -209,7 +209,7 @@ static int __devexit pasemi_nand_remove(struct of_device *ofdev)
return 0;
}
-static struct of_device_id pasemi_nand_match[] =
+static const struct of_device_id pasemi_nand_match[] =
{
{
.compatible = "pasemi,localbus-nand",
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 5d55152162cf..e02fa4f0e3c9 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1320,6 +1320,17 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
goto fail_free_irq;
}
+ if (mtd_has_cmdlinepart()) {
+ static const char *probes[] = { "cmdlinepart", NULL };
+ struct mtd_partition *parts;
+ int nr_parts;
+
+ nr_parts = parse_mtd_partitions(mtd, probes, &parts, 0);
+
+ if (nr_parts)
+ return add_mtd_partitions(mtd, parts, nr_parts);
+ }
+
return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
fail_free_irq:
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
new file mode 100644
index 000000000000..78a423295474
--- /dev/null
+++ b/drivers/mtd/nand/r852.c
@@ -0,0 +1,1140 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * driver for Ricoh xD readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+#include <linux/sched.h>
+#include "sm_common.h"
+#include "r852.h"
+
+
+static int r852_enable_dma = 1;
+module_param(r852_enable_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
+
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* read register */
+static inline uint8_t r852_read_reg(struct r852_device *dev, int address)
+{
+ uint8_t reg = readb(dev->mmio + address);
+ return reg;
+}
+
+/* write register */
+static inline void r852_write_reg(struct r852_device *dev,
+ int address, uint8_t value)
+{
+ writeb(value, dev->mmio + address);
+ mmiowb();
+}
+
+
+/* read dword sized register */
+static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address)
+{
+ uint32_t reg = le32_to_cpu(readl(dev->mmio + address));
+ return reg;
+}
+
+/* write dword sized register */
+static inline void r852_write_reg_dword(struct r852_device *dev,
+ int address, uint32_t value)
+{
+ writel(cpu_to_le32(value), dev->mmio + address);
+ mmiowb();
+}
+
+/* returns pointer to our private structure */
+static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+ return (struct r852_device *)chip->priv;
+}
+
+
+/* check if controller supports dma */
+static void r852_dma_test(struct r852_device *dev)
+{
+ dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) &
+ (R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2);
+
+ if (!dev->dma_usable)
+ message("Non dma capable device detected, dma disabled");
+
+ if (!r852_enable_dma) {
+ message("disabling dma on user request");
+ dev->dma_usable = 0;
+ }
+}
+
+/*
+ * Enable dma. Enables ether first or second stage of the DMA,
+ * Expects dev->dma_dir and dev->dma_state be set
+ */
+static void r852_dma_enable(struct r852_device *dev)
+{
+ uint8_t dma_reg, dma_irq_reg;
+
+ /* Set up dma settings */
+ dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS);
+ dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY);
+
+ if (dev->dma_dir)
+ dma_reg |= R852_DMA_READ;
+
+ if (dev->dma_state == DMA_INTERNAL) {
+ dma_reg |= R852_DMA_INTERNAL;
+ /* Precaution to make sure HW doesn't write */
+ /* to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ } else {
+ dma_reg |= R852_DMA_MEMORY;
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_dma_addr));
+ }
+
+ /* Precaution: make sure write reached the device */
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg);
+
+ /* Set dma irq */
+ dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ dma_irq_reg |
+ R852_DMA_IRQ_INTERNAL |
+ R852_DMA_IRQ_ERROR |
+ R852_DMA_IRQ_MEMORY);
+}
+
+/*
+ * Disable dma, called from the interrupt handler, which specifies
+ * success of the operation via 'error' argument
+ */
+static void r852_dma_done(struct r852_device *dev, int error)
+{
+ WARN_ON(dev->dma_stage == 0);
+
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA,
+ r852_read_reg_dword(dev, R852_DMA_IRQ_STA));
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0);
+
+ /* Precaution to make sure HW doesn't write to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ dev->dma_error = error;
+ dev->dma_stage = 0;
+
+ if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
+ pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
+ dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
+ complete(&dev->dma_done);
+}
+
+/*
+ * Wait, till dma is done, which includes both phases of it
+ */
+static int r852_dma_wait(struct r852_device *dev)
+{
+ long timeout = wait_for_completion_timeout(&dev->dma_done,
+ msecs_to_jiffies(1000));
+ if (!timeout) {
+ dbg("timeout waiting for DMA interrupt");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Read/Write one page using dma. Only pages can be read (512 bytes)
+*/
+static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
+{
+ int bounce = 0;
+ unsigned long flags;
+ int error;
+
+ dev->dma_error = 0;
+
+ /* Set dma direction */
+ dev->dma_dir = do_read;
+ dev->dma_stage = 1;
+
+ dbg_verbose("doing dma %s ", do_read ? "read" : "write");
+
+ /* Set intial dma state: for reading first fill on board buffer,
+ from device, for writes first fill the buffer from memory*/
+ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
+
+ /* if incoming buffer is not page aligned, we should do bounce */
+ if ((unsigned long)buf & (R852_DMA_LEN-1))
+ bounce = 1;
+
+ if (!bounce) {
+ dev->phys_dma_addr = pci_map_single(dev->pci_dev, (void *)buf,
+ R852_DMA_LEN,
+ (do_read ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+ if (pci_dma_mapping_error(dev->pci_dev, dev->phys_dma_addr))
+ bounce = 1;
+ }
+
+ if (bounce) {
+ dbg_verbose("dma: using bounce buffer");
+ dev->phys_dma_addr = dev->phys_bounce_buffer;
+ if (!do_read)
+ memcpy(dev->bounce_buffer, buf, R852_DMA_LEN);
+ }
+
+ /* Enable DMA */
+ spin_lock_irqsave(&dev->irqlock, flags);
+ r852_dma_enable(dev);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+
+ /* Wait till complete */
+ error = r852_dma_wait(dev);
+
+ if (error) {
+ r852_dma_done(dev, error);
+ return;
+ }
+
+ if (do_read && bounce)
+ memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN);
+}
+
+/*
+ * Program data lines of the nand chip to send data to it
+ */
+void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ uint32_t reg;
+
+ /* Don't allow any access to hardware if we suspect card removal */
+ if (dev->card_unstable)
+ return;
+
+ /* Special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, (uint8_t *)buf, 0);
+ return;
+ }
+
+ /* write DWORD chinks - faster */
+ while (len) {
+ reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
+ r852_write_reg_dword(dev, R852_DATALINE, reg);
+ buf += 4;
+ len -= 4;
+
+ }
+
+ /* write rest */
+ while (len)
+ r852_write_reg(dev, R852_DATALINE, *buf++);
+}
+
+/*
+ * Read data lines of the nand chip to retrieve data
+ */
+void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ uint32_t reg;
+
+ if (dev->card_unstable) {
+ /* since we can't signal error here, at least, return
+ predictable buffer */
+ memset(buf, 0, len);
+ return;
+ }
+
+ /* special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, buf, 1);
+ return;
+ }
+
+ /* read in dword sized chunks */
+ while (len >= 4) {
+
+ reg = r852_read_reg_dword(dev, R852_DATALINE);
+ *buf++ = reg & 0xFF;
+ *buf++ = (reg >> 8) & 0xFF;
+ *buf++ = (reg >> 16) & 0xFF;
+ *buf++ = (reg >> 24) & 0xFF;
+ len -= 4;
+ }
+
+ /* read the reset by bytes */
+ while (len--)
+ *buf++ = r852_read_reg(dev, R852_DATALINE);
+}
+
+/*
+ * Read one byte from nand chip
+ */
+static uint8_t r852_read_byte(struct mtd_info *mtd)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ /* Same problem as in r852_read_buf.... */
+ if (dev->card_unstable)
+ return 0;
+
+ return r852_read_reg(dev, R852_DATALINE);
+}
+
+
+/*
+ * Readback the buffer to verify it
+ */
+int r852_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ /* We can't be sure about anything here... */
+ if (dev->card_unstable)
+ return -1;
+
+ /* This will never happen, unless you wired up a nand chip
+ with > 512 bytes page size to the reader */
+ if (len > SM_SECTOR_SIZE)
+ return 0;
+
+ r852_read_buf(mtd, dev->tmp_buffer, len);
+ return memcmp(buf, dev->tmp_buffer, len);
+}
+
+/*
+ * Control several chip lines & send commands
+ */
+void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND |
+ R852_CTL_ON | R852_CTL_CARDENABLE);
+
+ if (ctrl & NAND_ALE)
+ dev->ctlreg |= R852_CTL_DATA;
+
+ if (ctrl & NAND_CLE)
+ dev->ctlreg |= R852_CTL_COMMAND;
+
+ if (ctrl & NAND_NCE)
+ dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON);
+ else
+ dev->ctlreg &= ~R852_CTL_WRITE;
+
+ /* when write is stareted, enable write access */
+ if (dat == NAND_CMD_ERASE1)
+ dev->ctlreg |= R852_CTL_WRITE;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ /* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need
+ to set write mode */
+ if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) {
+ dev->ctlreg |= R852_CTL_WRITE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ if (dat != NAND_CMD_NONE)
+ r852_write_reg(dev, R852_DATALINE, dat);
+}
+
+/*
+ * Wait till card is ready.
+ * based on nand_wait, but returns errors on DMA error
+ */
+int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct r852_device *dev = (struct r852_device *)chip->priv;
+
+ unsigned long timeout;
+ int status;
+
+ timeout = jiffies + (chip->state == FL_ERASING ?
+ msecs_to_jiffies(400) : msecs_to_jiffies(20));
+
+ while (time_before(jiffies, timeout))
+ if (chip->dev_ready(mtd))
+ break;
+
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ status = (int)chip->read_byte(mtd);
+
+ /* Unfortunelly, no way to send detailed error status... */
+ if (dev->dma_error) {
+ status |= NAND_STATUS_FAIL;
+ dev->dma_error = 0;
+ }
+ return status;
+}
+
+/*
+ * Check if card is ready
+ */
+
+int r852_ready(struct mtd_info *mtd)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
+}
+
+
+/*
+ * Set ECC engine mode
+*/
+
+void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return;
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ /* enable ecc generation/check*/
+ dev->ctlreg |= R852_CTL_ECC_ENABLE;
+
+ /* flush ecc buffer */
+ r852_write_reg(dev, R852_CTL,
+ dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return;
+
+ case NAND_ECC_READSYN:
+ /* disable ecc generation */
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+}
+
+/*
+ * Calculate ECC, only used for writes
+ */
+
+int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ struct sm_oob *oob = (struct sm_oob *)ecc_code;
+ uint32_t ecc1, ecc2;
+
+ if (dev->card_unstable)
+ return 0;
+
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ ecc1 = r852_read_reg_dword(dev, R852_DATALINE);
+ ecc2 = r852_read_reg_dword(dev, R852_DATALINE);
+
+ oob->ecc1[0] = (ecc1) & 0xFF;
+ oob->ecc1[1] = (ecc1 >> 8) & 0xFF;
+ oob->ecc1[2] = (ecc1 >> 16) & 0xFF;
+
+ oob->ecc2[0] = (ecc2) & 0xFF;
+ oob->ecc2[1] = (ecc2 >> 8) & 0xFF;
+ oob->ecc2[2] = (ecc2 >> 16) & 0xFF;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return 0;
+}
+
+/*
+ * Correct the data using ECC, hw did almost everything for us
+ */
+
+int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ uint16_t ecc_reg;
+ uint8_t ecc_status, err_byte;
+ int i, error = 0;
+
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return 0;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+ ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+
+ for (i = 0 ; i <= 1 ; i++) {
+
+ ecc_status = (ecc_reg >> 8) & 0xFF;
+
+ /* ecc uncorrectable error */
+ if (ecc_status & R852_ECC_FAIL) {
+ dbg("ecc: unrecoverable error, in half %d", i);
+ error = -1;
+ goto exit;
+ }
+
+ /* correctable error */
+ if (ecc_status & R852_ECC_CORRECTABLE) {
+
+ err_byte = ecc_reg & 0xFF;
+ dbg("ecc: recoverable error, "
+ "in half %d, byte %d, bit %d", i,
+ err_byte, ecc_status & R852_ECC_ERR_BIT_MSK);
+
+ dat[err_byte] ^=
+ 1 << (ecc_status & R852_ECC_ERR_BIT_MSK);
+ error++;
+ }
+
+ dat += 256;
+ ecc_reg >>= 16;
+ }
+exit:
+ return error;
+}
+
+/*
+ * This is copy of nand_read_oob_std
+ * nand_read_oob_syndrome assumes we can send column address - we can't
+ */
+static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page, int sndcmd)
+{
+ if (sndcmd) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ sndcmd = 0;
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return sndcmd;
+}
+
+/*
+ * Start the nand engine
+ */
+
+void r852_engine_enable(struct r852_device *dev)
+{
+ if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ } else {
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ }
+ msleep(300);
+ r852_write_reg(dev, R852_CTL, 0);
+}
+
+
+/*
+ * Stop the nand engine
+ */
+
+void r852_engine_disable(struct r852_device *dev)
+{
+ r852_write_reg_dword(dev, R852_HW, 0);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
+}
+
+/*
+ * Test if card is present
+ */
+
+void r852_card_update_present(struct r852_device *dev)
+{
+ unsigned long flags;
+ uint8_t reg;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ reg = r852_read_reg(dev, R852_CARD_STA);
+ dev->card_detected = !!(reg & R852_CARD_STA_PRESENT);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Update card detection IRQ state according to current card state
+ * which is read in r852_card_update_present
+ */
+void r852_update_card_detect(struct r852_device *dev)
+{
+ int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ dev->card_unstable = 0;
+
+ card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT);
+ card_detect_reg |= R852_CARD_IRQ_GENABLE;
+
+ card_detect_reg |= dev->card_detected ?
+ R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT;
+
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
+}
+
+ssize_t r852_media_type_show(struct device *sys_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
+ struct r852_device *dev = r852_get_dev(mtd);
+ char *data = dev->sm ? "smartmedia" : "xd";
+
+ strcpy(buf, data);
+ return strlen(data);
+}
+
+DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
+
+
+/* Detect properties of card in slot */
+void r852_update_media_status(struct r852_device *dev)
+{
+ uint8_t reg;
+ unsigned long flags;
+ int readonly;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ if (!dev->card_detected) {
+ message("card removed");
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ;
+ }
+
+ readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO;
+ reg = r852_read_reg(dev, R852_DMA_CAP);
+ dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT);
+
+ message("detected %s %s card in slot",
+ dev->sm ? "SmartMedia" : "xD",
+ readonly ? "readonly" : "writeable");
+
+ dev->readonly = readonly;
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Register the nand device
+ * Called when the card is detected
+ */
+int r852_register_nand_device(struct r852_device *dev)
+{
+ dev->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+
+ if (!dev->mtd)
+ goto error1;
+
+ WARN_ON(dev->card_registred);
+
+ dev->mtd->owner = THIS_MODULE;
+ dev->mtd->priv = dev->chip;
+ dev->mtd->dev.parent = &dev->pci_dev->dev;
+
+ if (dev->readonly)
+ dev->chip->options |= NAND_ROM;
+
+ r852_engine_enable(dev);
+
+ if (sm_register_device(dev->mtd, dev->sm))
+ goto error2;
+
+ if (device_create_file(&dev->mtd->dev, &dev_attr_media_type))
+ message("can't create media type sysfs attribute");
+
+ dev->card_registred = 1;
+ return 0;
+error2:
+ kfree(dev->mtd);
+error1:
+ /* Force card redetect */
+ dev->card_detected = 0;
+ return -1;
+}
+
+/*
+ * Unregister the card
+ */
+
+void r852_unregister_nand_device(struct r852_device *dev)
+{
+ if (!dev->card_registred)
+ return;
+
+ device_remove_file(&dev->mtd->dev, &dev_attr_media_type);
+ nand_release(dev->mtd);
+ r852_engine_disable(dev);
+ dev->card_registred = 0;
+ kfree(dev->mtd);
+ dev->mtd = NULL;
+}
+
+/* Card state updater */
+void r852_card_detect_work(struct work_struct *work)
+{
+ struct r852_device *dev =
+ container_of(work, struct r852_device, card_detect_work.work);
+
+ r852_card_update_present(dev);
+ dev->card_unstable = 0;
+
+ /* False alarm */
+ if (dev->card_detected == dev->card_registred)
+ goto exit;
+
+ /* Read media properties */
+ r852_update_media_status(dev);
+
+ /* Register the card */
+ if (dev->card_detected)
+ r852_register_nand_device(dev);
+ else
+ r852_unregister_nand_device(dev);
+exit:
+ /* Update detection logic */
+ r852_update_card_detect(dev);
+}
+
+/* Ack + disable IRQ generation */
+static void r852_disable_irqs(struct r852_device *dev)
+{
+ uint8_t reg;
+ reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK);
+
+ reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ reg & ~R852_DMA_IRQ_MASK);
+
+ r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK);
+}
+
+/* Interrupt handler */
+static irqreturn_t r852_irq(int irq, void *data)
+{
+ struct r852_device *dev = (struct r852_device *)data;
+
+ uint8_t card_status, dma_status;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+
+ /* We can recieve shared interrupt while pci is suspended
+ in that case reads will return 0xFFFFFFFF.... */
+ if (dev->insuspend)
+ goto out;
+
+ /* handle card detection interrupts first */
+ card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
+ r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
+
+ if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) {
+
+ ret = IRQ_HANDLED;
+ dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
+
+ /* we shouldn't recieve any interrupts if we wait for card
+ to settle */
+ WARN_ON(dev->card_unstable);
+
+ /* disable irqs while card is unstable */
+ /* this will timeout DMA if active, but better that garbage */
+ r852_disable_irqs(dev);
+
+ if (dev->card_unstable)
+ goto out;
+
+ /* let, card state to settle a bit, and then do the work */
+ dev->card_unstable = 1;
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, msecs_to_jiffies(100));
+ goto out;
+ }
+
+
+ /* Handle dma interrupts */
+ dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status);
+
+ if (dma_status & R852_DMA_IRQ_MASK) {
+
+ ret = IRQ_HANDLED;
+
+ if (dma_status & R852_DMA_IRQ_ERROR) {
+ dbg("recieved dma error IRQ");
+ r852_dma_done(dev, -EIO);
+ goto out;
+ }
+
+ /* recieved DMA interrupt out of nowhere? */
+ WARN_ON_ONCE(dev->dma_stage == 0);
+
+ if (dev->dma_stage == 0)
+ goto out;
+
+ /* done device access */
+ if (dev->dma_state == DMA_INTERNAL &&
+ (dma_status & R852_DMA_IRQ_INTERNAL)) {
+
+ dev->dma_state = DMA_MEMORY;
+ dev->dma_stage++;
+ }
+
+ /* done memory DMA */
+ if (dev->dma_state == DMA_MEMORY &&
+ (dma_status & R852_DMA_IRQ_MEMORY)) {
+ dev->dma_state = DMA_INTERNAL;
+ dev->dma_stage++;
+ }
+
+ /* Enable 2nd half of dma dance */
+ if (dev->dma_stage == 2)
+ r852_dma_enable(dev);
+
+ /* Operation done */
+ if (dev->dma_stage == 3)
+ r852_dma_done(dev, 0);
+ goto out;
+ }
+
+ /* Handle unknown interrupts */
+ if (dma_status)
+ dbg("bad dma IRQ status = %x", dma_status);
+
+ if (card_status & ~R852_CARD_STA_CD)
+ dbg("strange card status = %x", card_status);
+
+out:
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ret;
+}
+
+int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
+{
+ int error;
+ struct nand_chip *chip;
+ struct r852_device *dev;
+
+ /* pci initialization */
+ error = pci_enable_device(pci_dev);
+
+ if (error)
+ goto error1;
+
+ pci_set_master(pci_dev);
+
+ error = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+ if (error)
+ goto error2;
+
+ error = pci_request_regions(pci_dev, DRV_NAME);
+
+ if (error)
+ goto error3;
+
+ error = -ENOMEM;
+
+ /* init nand chip, but register it only on card insert */
+ chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
+
+ if (!chip)
+ goto error4;
+
+ /* commands */
+ chip->cmd_ctrl = r852_cmdctl;
+ chip->waitfunc = r852_wait;
+ chip->dev_ready = r852_ready;
+
+ /* I/O */
+ chip->read_byte = r852_read_byte;
+ chip->read_buf = r852_read_buf;
+ chip->write_buf = r852_write_buf;
+ chip->verify_buf = r852_verify_buf;
+
+ /* ecc */
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.size = R852_DMA_LEN;
+ chip->ecc.bytes = SM_OOB_SIZE;
+ chip->ecc.hwctl = r852_ecc_hwctl;
+ chip->ecc.calculate = r852_ecc_calculate;
+ chip->ecc.correct = r852_ecc_correct;
+
+ /* TODO: hack */
+ chip->ecc.read_oob = r852_read_oob;
+
+ /* init our device structure */
+ dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL);
+
+ if (!dev)
+ goto error5;
+
+ chip->priv = dev;
+ dev->chip = chip;
+ dev->pci_dev = pci_dev;
+ pci_set_drvdata(pci_dev, dev);
+
+ dev->bounce_buffer = pci_alloc_consistent(pci_dev, R852_DMA_LEN,
+ &dev->phys_bounce_buffer);
+
+ if (!dev->bounce_buffer)
+ goto error6;
+
+
+ error = -ENODEV;
+ dev->mmio = pci_ioremap_bar(pci_dev, 0);
+
+ if (!dev->mmio)
+ goto error7;
+
+ error = -ENOMEM;
+ dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL);
+
+ if (!dev->tmp_buffer)
+ goto error8;
+
+ init_completion(&dev->dma_done);
+
+ dev->card_workqueue = create_freezeable_workqueue(DRV_NAME);
+
+ if (!dev->card_workqueue)
+ goto error9;
+
+ INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work);
+
+ /* shutdown everything - precation */
+ r852_engine_disable(dev);
+ r852_disable_irqs(dev);
+
+ r852_dma_test(dev);
+
+ /*register irq handler*/
+ error = -ENODEV;
+ if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
+ DRV_NAME, dev))
+ goto error10;
+
+ dev->irq = pci_dev->irq;
+ spin_lock_init(&dev->irqlock);
+
+ /* kick initial present test */
+ dev->card_detected = 0;
+ r852_card_update_present(dev);
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, 0);
+
+
+ printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n");
+ return 0;
+
+error10:
+ destroy_workqueue(dev->card_workqueue);
+error9:
+ kfree(dev->tmp_buffer);
+error8:
+ pci_iounmap(pci_dev, dev->mmio);
+error7:
+ pci_free_consistent(pci_dev, R852_DMA_LEN,
+ dev->bounce_buffer, dev->phys_bounce_buffer);
+error6:
+ kfree(dev);
+error5:
+ kfree(chip);
+error4:
+ pci_release_regions(pci_dev);
+error3:
+error2:
+ pci_disable_device(pci_dev);
+error1:
+ return error;
+}
+
+void r852_remove(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ /* Stop detect workqueue -
+ we are going to unregister the device anyway*/
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ destroy_workqueue(dev->card_workqueue);
+
+ /* Unregister the device, this might make more IO */
+ r852_unregister_nand_device(dev);
+
+ /* Stop interrupts */
+ r852_disable_irqs(dev);
+ synchronize_irq(dev->irq);
+ free_irq(dev->irq, dev);
+
+ /* Cleanup */
+ kfree(dev->tmp_buffer);
+ pci_iounmap(pci_dev, dev->mmio);
+ pci_free_consistent(pci_dev, R852_DMA_LEN,
+ dev->bounce_buffer, dev->phys_bounce_buffer);
+
+ kfree(dev->chip);
+ kfree(dev);
+
+ /* Shutdown the PCI device */
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+}
+
+void r852_shutdown(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ r852_disable_irqs(dev);
+ synchronize_irq(dev->irq);
+ pci_disable_device(pci_dev);
+}
+
+#ifdef CONFIG_PM
+int r852_suspend(struct device *device)
+{
+ struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
+ unsigned long flags;
+
+ if (dev->ctlreg & R852_CTL_CARDENABLE)
+ return -EBUSY;
+
+ /* First make sure the detect work is gone */
+ cancel_delayed_work_sync(&dev->card_detect_work);
+
+ /* Turn off the interrupts and stop the device */
+ r852_disable_irqs(dev);
+ r852_engine_disable(dev);
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ dev->insuspend = 1;
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+
+ /* At that point, even if interrupt handler is running, it will quit */
+ /* So wait for this to happen explictly */
+ synchronize_irq(dev->irq);
+
+ /* If card was pulled off just during the suspend, which is very
+ unlikely, we will remove it on resume, it too late now
+ anyway... */
+ dev->card_unstable = 0;
+
+ pci_save_state(to_pci_dev(device));
+ return pci_prepare_to_sleep(to_pci_dev(device));
+}
+
+int r852_resume(struct device *device)
+{
+ struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
+ unsigned long flags;
+
+ /* Turn on the hardware */
+ pci_back_from_sleep(to_pci_dev(device));
+ pci_restore_state(to_pci_dev(device));
+
+ r852_disable_irqs(dev);
+ r852_card_update_present(dev);
+ r852_engine_disable(dev);
+
+
+ /* Now its safe for IRQ to run */
+ spin_lock_irqsave(&dev->irqlock, flags);
+ dev->insuspend = 0;
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+
+
+ /* If card status changed, just do the work */
+ if (dev->card_detected != dev->card_registred) {
+ dbg("card was %s during low power state",
+ dev->card_detected ? "added" : "removed");
+
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, 1000);
+ return 0;
+ }
+
+ /* Otherwise, initialize the card */
+ if (dev->card_registred) {
+ r852_engine_enable(dev);
+ dev->chip->select_chip(dev->mtd, 0);
+ dev->chip->cmdfunc(dev->mtd, NAND_CMD_RESET, -1, -1);
+ dev->chip->select_chip(dev->mtd, -1);
+ }
+
+ /* Program card detection IRQ */
+ r852_update_card_detect(dev);
+ return 0;
+}
+#else
+#define r852_suspend NULL
+#define r852_resume NULL
+#endif
+
+static const struct pci_device_id r852_pci_id_tbl[] = {
+
+ { PCI_VDEVICE(RICOH, 0x0852), },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
+
+SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+
+
+static struct pci_driver r852_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = r852_pci_id_tbl,
+ .probe = r852_probe,
+ .remove = r852_remove,
+ .shutdown = r852_shutdown,
+ .driver.pm = &r852_pm_ops,
+};
+
+static __init int r852_module_init(void)
+{
+ return pci_register_driver(&r852_pci_driver);
+}
+
+static void __exit r852_module_exit(void)
+{
+ pci_unregister_driver(&r852_pci_driver);
+}
+
+module_init(r852_module_init);
+module_exit(r852_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver");
diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h
new file mode 100644
index 000000000000..8096cc280c73
--- /dev/null
+++ b/drivers/mtd/nand/r852.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * driver for Ricoh xD readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/mtd/nand.h>
+#include <linux/spinlock.h>
+
+
+/* nand interface + ecc
+ byte write/read does one cycle on nand data lines.
+ dword write/read does 4 cycles
+ if R852_CTL_ECC_ACCESS is set in R852_CTL, then dword read reads
+ results of ecc correction, if DMA read was done before.
+ If write was done two dword reads read generated ecc checksums
+*/
+#define R852_DATALINE 0x00
+
+/* control register */
+#define R852_CTL 0x04
+#define R852_CTL_COMMAND 0x01 /* send command (#CLE)*/
+#define R852_CTL_DATA 0x02 /* read/write data (#ALE)*/
+#define R852_CTL_ON 0x04 /* only seem to controls the hd led, */
+ /* but has to be set on start...*/
+#define R852_CTL_RESET 0x08 /* unknown, set only on start once*/
+#define R852_CTL_CARDENABLE 0x10 /* probably (#CE) - always set*/
+#define R852_CTL_ECC_ENABLE 0x20 /* enable ecc engine */
+#define R852_CTL_ECC_ACCESS 0x40 /* read/write ecc via reg #0*/
+#define R852_CTL_WRITE 0x80 /* set when performing writes (#WP) */
+
+/* card detection status */
+#define R852_CARD_STA 0x05
+
+#define R852_CARD_STA_CD 0x01 /* state of #CD line, same as 0x04 */
+#define R852_CARD_STA_RO 0x02 /* card is readonly */
+#define R852_CARD_STA_PRESENT 0x04 /* card is present (#CD) */
+#define R852_CARD_STA_ABSENT 0x08 /* card is absent */
+#define R852_CARD_STA_BUSY 0x80 /* card is busy - (#R/B) */
+
+/* card detection irq status & enable*/
+#define R852_CARD_IRQ_STA 0x06 /* IRQ status */
+#define R852_CARD_IRQ_ENABLE 0x07 /* IRQ enable */
+
+#define R852_CARD_IRQ_CD 0x01 /* fire when #CD lights, same as 0x04*/
+#define R852_CARD_IRQ_REMOVE 0x04 /* detect card removal */
+#define R852_CARD_IRQ_INSERT 0x08 /* detect card insert */
+#define R852_CARD_IRQ_UNK1 0x10 /* unknown */
+#define R852_CARD_IRQ_GENABLE 0x80 /* general enable */
+#define R852_CARD_IRQ_MASK 0x1D
+
+
+
+/* hardware enable */
+#define R852_HW 0x08
+#define R852_HW_ENABLED 0x01 /* hw enabled */
+#define R852_HW_UNKNOWN 0x80
+
+
+/* dma capabilities */
+#define R852_DMA_CAP 0x09
+#define R852_SMBIT 0x20 /* if set with bit #6 or bit #7, then */
+ /* hw is smartmedia */
+#define R852_DMA1 0x40 /* if set w/bit #7, dma is supported */
+#define R852_DMA2 0x80 /* if set w/bit #6, dma is supported */
+
+
+/* physical DMA address - 32 bit value*/
+#define R852_DMA_ADDR 0x0C
+
+
+/* dma settings */
+#define R852_DMA_SETTINGS 0x10
+#define R852_DMA_MEMORY 0x01 /* (memory <-> internal hw buffer) */
+#define R852_DMA_READ 0x02 /* 0 = write, 1 = read */
+#define R852_DMA_INTERNAL 0x04 /* (internal hw buffer <-> card) */
+
+/* dma IRQ status */
+#define R852_DMA_IRQ_STA 0x14
+
+/* dma IRQ enable */
+#define R852_DMA_IRQ_ENABLE 0x18
+
+#define R852_DMA_IRQ_MEMORY 0x01 /* (memory <-> internal hw buffer) */
+#define R852_DMA_IRQ_ERROR 0x02 /* error did happen */
+#define R852_DMA_IRQ_INTERNAL 0x04 /* (internal hw buffer <-> card) */
+#define R852_DMA_IRQ_MASK 0x07 /* mask of all IRQ bits */
+
+
+/* ECC syndrome format - read from reg #0 will return two copies of these for
+ each half of the page.
+ first byte is error byte location, and second, bit location + flags */
+#define R852_ECC_ERR_BIT_MSK 0x07 /* error bit location */
+#define R852_ECC_CORRECT 0x10 /* no errors - (guessed) */
+#define R852_ECC_CORRECTABLE 0x20 /* correctable error exist */
+#define R852_ECC_FAIL 0x40 /* non correctable error detected */
+
+#define R852_DMA_LEN 512
+
+#define DMA_INTERNAL 0
+#define DMA_MEMORY 1
+
+struct r852_device {
+ void __iomem *mmio; /* mmio */
+ struct mtd_info *mtd; /* mtd backpointer */
+ struct nand_chip *chip; /* nand chip backpointer */
+ struct pci_dev *pci_dev; /* pci backpointer */
+
+ /* dma area */
+ dma_addr_t phys_dma_addr; /* bus address of buffer*/
+ struct completion dma_done; /* data transfer done */
+
+ dma_addr_t phys_bounce_buffer; /* bus address of bounce buffer */
+ uint8_t *bounce_buffer; /* virtual address of bounce buffer */
+
+ int dma_dir; /* 1 = read, 0 = write */
+ int dma_stage; /* 0 - idle, 1 - first step,
+ 2 - second step */
+
+ int dma_state; /* 0 = internal, 1 = memory */
+ int dma_error; /* dma errors */
+ int dma_usable; /* is it possible to use dma */
+
+ /* card status area */
+ struct delayed_work card_detect_work;
+ struct workqueue_struct *card_workqueue;
+ int card_registred; /* card registered with mtd */
+ int card_detected; /* card detected in slot */
+ int card_unstable; /* whenever the card is inserted,
+ is not known yet */
+ int readonly; /* card is readonly */
+ int sm; /* Is card smartmedia */
+
+ /* interrupt handling */
+ spinlock_t irqlock; /* IRQ protecting lock */
+ int irq; /* irq num */
+ int insuspend; /* device is suspended */
+
+ /* misc */
+ void *tmp_buffer; /* temporary buffer */
+ uint8_t ctlreg; /* cached contents of control reg */
+};
+
+#define DRV_NAME "r852"
+
+
+#define dbg(format, ...) \
+ if (debug) \
+ printk(KERN_DEBUG DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+#define dbg_verbose(format, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+
+#define message(format, ...) \
+ printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index fa6e9c7fe511..239aadfd01b0 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -929,14 +929,13 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
pr_debug("s3c2410_nand_probe(%p)\n", pdev);
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL) {
dev_err(&pdev->dev, "no memory for flash info\n");
err = -ENOMEM;
goto exit_error;
}
- memset(info, 0, sizeof(*info));
platform_set_drvdata(pdev, info);
spin_lock_init(&info->controller.lock);
@@ -957,7 +956,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
/* currently we assume we have the one resource */
res = pdev->resource;
- size = res->end - res->start + 1;
+ size = resource_size(res);
info->area = request_mem_region(res->start, size, pdev->name);
@@ -994,15 +993,13 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
/* allocate our information */
size = nr_sets * sizeof(*info->mtds);
- info->mtds = kmalloc(size, GFP_KERNEL);
+ info->mtds = kzalloc(size, GFP_KERNEL);
if (info->mtds == NULL) {
dev_err(&pdev->dev, "failed to allocate mtd storage\n");
err = -ENOMEM;
goto exit_error;
}
- memset(info->mtds, 0, size);
-
/* initialise all possible chips */
nmtd = info->mtds;
@@ -1013,7 +1010,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
s3c2410_nand_init_chip(info, nmtd, sets);
nmtd->scan_res = nand_scan_ident(&nmtd->mtd,
- (sets) ? sets->nr_chips : 1);
+ (sets) ? sets->nr_chips : 1,
+ NULL);
if (nmtd->scan_res == 0) {
s3c2410_nand_update_chip(info, nmtd);
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 34752fce0793..546c2f0eb2e8 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -855,7 +855,7 @@ static int __devinit flctl_probe(struct platform_device *pdev)
nand->read_word = flctl_read_word;
}
- ret = nand_scan_ident(flctl_mtd, 1);
+ ret = nand_scan_ident(flctl_mtd, 1, NULL);
if (ret)
goto err;
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
new file mode 100644
index 000000000000..ac80fb362e63
--- /dev/null
+++ b/drivers/mtd/nand/sm_common.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * Common routines & support for xD format
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/mtd/nand.h>
+#include "sm_common.h"
+
+static struct nand_ecclayout nand_oob_sm = {
+ .eccbytes = 6,
+ .eccpos = {8, 9, 10, 13, 14, 15},
+ .oobfree = {
+ {.offset = 0 , .length = 4}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ {.offset = 11, .length = 2} /* LBA2 */
+ }
+};
+
+/* NOTE: This layout is is not compatabable with SmartMedia, */
+/* because the 256 byte devices have page depenent oob layout */
+/* However it does preserve the bad block markers */
+/* If you use smftl, it will bypass this and work correctly */
+/* If you not, then you break SmartMedia compliance anyway */
+
+static struct nand_ecclayout nand_oob_sm_small = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {
+ {.offset = 3 , .length = 2}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ }
+};
+
+
+static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_oob_ops ops;
+ struct sm_oob oob;
+ int ret, error = 0;
+
+ memset(&oob, -1, SM_OOB_SIZE);
+ oob.block_status = 0x0F;
+
+ /* As long as this function is called on erase block boundaries
+ it will work correctly for 256 byte nand */
+ ops.mode = MTD_OOB_PLACE;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = (void *)&oob;
+ ops.datbuf = NULL;
+
+
+ ret = mtd->write_oob(mtd, ofs, &ops);
+ if (ret < 0 || ops.oobretlen != SM_OOB_SIZE) {
+ printk(KERN_NOTICE
+ "sm_common: can't mark sector at %i as bad\n",
+ (int)ofs);
+ error = -EIO;
+ } else
+ mtd->ecc_stats.badblocks++;
+
+ return error;
+}
+
+
+static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
+ {"SmartMedia 1MiB 5V", 0x6e, 256, 1, 0x1000, 0},
+ {"SmartMedia 1MiB 3,3V", 0xe8, 256, 1, 0x1000, 0},
+ {"SmartMedia 1MiB 3,3V", 0xec, 256, 1, 0x1000, 0},
+ {"SmartMedia 2MiB 3,3V", 0xea, 256, 2, 0x1000, 0},
+ {"SmartMedia 2MiB 5V", 0x64, 256, 2, 0x1000, 0},
+ {"SmartMedia 2MiB 3,3V ROM", 0x5d, 512, 2, 0x2000, NAND_ROM},
+ {"SmartMedia 4MiB 3,3V", 0xe3, 512, 4, 0x2000, 0},
+ {"SmartMedia 4MiB 3,3/5V", 0xe5, 512, 4, 0x2000, 0},
+ {"SmartMedia 4MiB 5V", 0x6b, 512, 4, 0x2000, 0},
+ {"SmartMedia 4MiB 3,3V ROM", 0xd5, 512, 4, 0x2000, NAND_ROM},
+ {"SmartMedia 8MiB 3,3V", 0xe6, 512, 8, 0x2000, 0},
+ {"SmartMedia 8MiB 3,3V ROM", 0xd6, 512, 8, 0x2000, NAND_ROM},
+ {"SmartMedia 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0},
+ {"SmartMedia 16MiB 3,3V ROM", 0x57, 512, 16, 0x4000, NAND_ROM},
+ {"SmartMedia 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0},
+ {"SmartMedia 32MiB 3,3V ROM", 0x58, 512, 32, 0x4000, NAND_ROM},
+ {"SmartMedia 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0},
+ {"SmartMedia 64MiB 3,3V ROM", 0xd9, 512, 64, 0x4000, NAND_ROM},
+ {"SmartMedia 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0},
+ {"SmartMedia 128MiB 3,3V ROM", 0xda, 512, 128, 0x4000, NAND_ROM},
+ {"SmartMedia 256MiB 3,3V", 0x71, 512, 256, 0x4000 },
+ {"SmartMedia 256MiB 3,3V ROM", 0x5b, 512, 256, 0x4000, NAND_ROM},
+ {NULL,}
+};
+
+#define XD_TYPEM (NAND_NO_AUTOINCR | NAND_BROKEN_XD)
+static struct nand_flash_dev nand_xd_flash_ids[] = {
+
+ {"xD 16MiB 3,3V", 0x73, 512, 16, 0x4000, 0},
+ {"xD 32MiB 3,3V", 0x75, 512, 32, 0x4000, 0},
+ {"xD 64MiB 3,3V", 0x76, 512, 64, 0x4000, 0},
+ {"xD 128MiB 3,3V", 0x79, 512, 128, 0x4000, 0},
+ {"xD 256MiB 3,3V", 0x71, 512, 256, 0x4000, XD_TYPEM},
+ {"xD 512MiB 3,3V", 0xdc, 512, 512, 0x4000, XD_TYPEM},
+ {"xD 1GiB 3,3V", 0xd3, 512, 1024, 0x4000, XD_TYPEM},
+ {"xD 2GiB 3,3V", 0xd5, 512, 2048, 0x4000, XD_TYPEM},
+ {NULL,}
+};
+
+int sm_register_device(struct mtd_info *mtd, int smartmedia)
+{
+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+ int ret;
+
+ chip->options |= NAND_SKIP_BBTSCAN;
+
+ /* Scan for card properties */
+ ret = nand_scan_ident(mtd, 1, smartmedia ?
+ nand_smartmedia_flash_ids : nand_xd_flash_ids);
+
+ if (ret)
+ return ret;
+
+ /* Bad block marker postion */
+ chip->badblockpos = 0x05;
+ chip->badblockbits = 7;
+ chip->block_markbad = sm_block_markbad;
+
+ /* ECC layout */
+ if (mtd->writesize == SM_SECTOR_SIZE)
+ chip->ecc.layout = &nand_oob_sm;
+ else if (mtd->writesize == SM_SMALL_PAGE)
+ chip->ecc.layout = &nand_oob_sm_small;
+ else
+ return -ENODEV;
+
+ ret = nand_scan_tail(mtd);
+
+ if (ret)
+ return ret;
+
+ return add_mtd_device(mtd);
+}
+EXPORT_SYMBOL_GPL(sm_register_device);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Common SmartMedia/xD functions");
diff --git a/drivers/mtd/nand/sm_common.h b/drivers/mtd/nand/sm_common.h
new file mode 100644
index 000000000000..00f4a83359b2
--- /dev/null
+++ b/drivers/mtd/nand/sm_common.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * Common routines & support for SmartMedia/xD format
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/mtd/mtd.h>
+
+/* Full oob structure as written on the flash */
+struct sm_oob {
+ uint32_t reserved;
+ uint8_t data_status;
+ uint8_t block_status;
+ uint8_t lba_copy1[2];
+ uint8_t ecc2[3];
+ uint8_t lba_copy2[2];
+ uint8_t ecc1[3];
+} __attribute__((packed));
+
+
+/* one sector is always 512 bytes, but it can consist of two nand pages */
+#define SM_SECTOR_SIZE 512
+
+/* oob area is also 16 bytes, but might be from two pages */
+#define SM_OOB_SIZE 16
+
+/* This is maximum zone size, and all devices that have more that one zone
+ have this size */
+#define SM_MAX_ZONE_SIZE 1024
+
+/* support for small page nand */
+#define SM_SMALL_PAGE 256
+#define SM_SMALL_OOB_SIZE 8
+
+
+extern int sm_register_device(struct mtd_info *mtd, int smartmedia);
+
+
+static inline int sm_sector_valid(struct sm_oob *oob)
+{
+ return hweight16(oob->data_status) >= 5;
+}
+
+static inline int sm_block_valid(struct sm_oob *oob)
+{
+ return hweight16(oob->block_status) >= 7;
+}
+
+static inline int sm_block_erased(struct sm_oob *oob)
+{
+ static const uint32_t erased_pattern[4] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
+
+ /* First test for erased block */
+ if (!memcmp(oob, erased_pattern, sizeof(*oob)))
+ return 1;
+ return 0;
+}
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
index edb9b1384143..884852dc7eb4 100644
--- a/drivers/mtd/nand/socrates_nand.c
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -220,7 +220,7 @@ static int __devinit socrates_nand_probe(struct of_device *ofdev,
dev_set_drvdata(&ofdev->dev, host);
/* first scan to find the device and get the page size */
- if (nand_scan_ident(mtd, 1)) {
+ if (nand_scan_ident(mtd, 1, NULL)) {
res = -ENXIO;
goto out;
}
@@ -290,7 +290,7 @@ static int __devexit socrates_nand_remove(struct of_device *ofdev)
return 0;
}
-static struct of_device_id socrates_nand_match[] =
+static const struct of_device_id socrates_nand_match[] =
{
{
.compatible = "abb,socrates-nand",
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index fa28f01ae009..3041d1f7ae3f 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -319,7 +319,7 @@ static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
{
- struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mfd_cell *cell = dev_get_platdata(&dev->dev);
int ret;
if (cell->enable) {
@@ -363,7 +363,7 @@ static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
{
- struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mfd_cell *cell = dev_get_platdata(&dev->dev);
tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
if (cell->disable)
@@ -372,7 +372,7 @@ static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
static int tmio_probe(struct platform_device *dev)
{
- struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mfd_cell *cell = dev_get_platdata(&dev->dev);
struct tmio_nand_data *data = cell->driver_data;
struct resource *fcr = platform_get_resource(dev,
IORESOURCE_MEM, 0);
@@ -405,14 +405,14 @@ static int tmio_probe(struct platform_device *dev)
mtd->priv = nand_chip;
mtd->name = "tmio-nand";
- tmio->ccr = ioremap(ccr->start, ccr->end - ccr->start + 1);
+ tmio->ccr = ioremap(ccr->start, resource_size(ccr));
if (!tmio->ccr) {
retval = -EIO;
goto err_iomap_ccr;
}
tmio->fcr_base = fcr->start & 0xfffff;
- tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
+ tmio->fcr = ioremap(fcr->start, resource_size(fcr));
if (!tmio->fcr) {
retval = -EIO;
goto err_iomap_fcr;
@@ -516,7 +516,7 @@ static int tmio_remove(struct platform_device *dev)
#ifdef CONFIG_PM
static int tmio_suspend(struct platform_device *dev, pm_message_t state)
{
- struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mfd_cell *cell = dev_get_platdata(&dev->dev);
if (cell->suspend)
cell->suspend(dev);
@@ -527,7 +527,7 @@ static int tmio_suspend(struct platform_device *dev, pm_message_t state)
static int tmio_resume(struct platform_device *dev)
{
- struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data;
+ struct mfd_cell *cell = dev_get_platdata(&dev->dev);
/* FIXME - is this required or merely another attack of the broken
* SHARP platform? Looks suspicious.
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
deleted file mode 100644
index 0f5562aeedc1..000000000000
--- a/drivers/mtd/nand/ts7250.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * drivers/mtd/nand/ts7250.c
- *
- * Copyright (C) 2004 Technologic Systems (support@embeddedARM.com)
- *
- * Derived from drivers/mtd/nand/edb7312.c
- * Copyright (C) 2004 Marius Gröger (mag@sysgo.de)
- *
- * Derived from drivers/mtd/nand/autcpu12.c
- * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Overview:
- * This is a device driver for the NAND flash device found on the
- * TS-7250 board which utilizes a Samsung 32 Mbyte part.
- */
-
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/ts72xx.h>
-
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-
-/*
- * MTD structure for TS7250 board
- */
-static struct mtd_info *ts7250_mtd = NULL;
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
-#define NUM_PARTITIONS 3
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info32[] = {
- {
- .name = "TS-BOOTROM",
- .offset = 0x00000000,
- .size = 0x00004000,
- }, {
- .name = "Linux",
- .offset = 0x00004000,
- .size = 0x01d00000,
- }, {
- .name = "RedBoot",
- .offset = 0x01d04000,
- .size = 0x002fc000,
- },
-};
-
-/*
- * Define static partitions for flash device
- */
-static struct mtd_partition partition_info128[] = {
- {
- .name = "TS-BOOTROM",
- .offset = 0x00000000,
- .size = 0x00004000,
- }, {
- .name = "Linux",
- .offset = 0x00004000,
- .size = 0x07d00000,
- }, {
- .name = "RedBoot",
- .offset = 0x07d04000,
- .size = 0x002fc000,
- },
-};
-#endif
-
-
-/*
- * hardware specific access to control-lines
- *
- * ctrl:
- * NAND_NCE: bit 0 -> bit 2
- * NAND_CLE: bit 1 -> bit 1
- * NAND_ALE: bit 2 -> bit 0
- */
-static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE;
- unsigned char bits;
-
- bits = (ctrl & NAND_NCE) << 2;
- bits |= ctrl & NAND_CLE;
- bits |= (ctrl & NAND_ALE) >> 2;
-
- __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr);
- }
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-/*
- * read device ready pin
- */
-static int ts7250_device_ready(struct mtd_info *mtd)
-{
- return __raw_readb(TS72XX_NAND_BUSY_VIRT_BASE) & 0x20;
-}
-
-/*
- * Main initialization routine
- */
-static int __init ts7250_init(void)
-{
- struct nand_chip *this;
- const char *part_type = 0;
- int mtd_parts_nb = 0;
- struct mtd_partition *mtd_parts = 0;
-
- if (!machine_is_ts72xx() || board_is_ts7200())
- return -ENXIO;
-
- /* Allocate memory for MTD device structure and private data */
- ts7250_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
- if (!ts7250_mtd) {
- printk("Unable to allocate TS7250 NAND MTD device structure.\n");
- return -ENOMEM;
- }
-
- /* Get pointer to private data */
- this = (struct nand_chip *)(&ts7250_mtd[1]);
-
- /* Initialize structures */
- memset(ts7250_mtd, 0, sizeof(struct mtd_info));
- memset(this, 0, sizeof(struct nand_chip));
-
- /* Link the private data with the MTD structure */
- ts7250_mtd->priv = this;
- ts7250_mtd->owner = THIS_MODULE;
-
- /* insert callbacks */
- this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE;
- this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE;
- this->cmd_ctrl = ts7250_hwcontrol;
- this->dev_ready = ts7250_device_ready;
- this->chip_delay = 15;
- this->ecc.mode = NAND_ECC_SOFT;
-
- printk("Searching for NAND flash...\n");
- /* Scan to find existence of the device */
- if (nand_scan(ts7250_mtd, 1)) {
- kfree(ts7250_mtd);
- return -ENXIO;
- }
-#ifdef CONFIG_MTD_PARTITIONS
- ts7250_mtd->name = "ts7250-nand";
- mtd_parts_nb = parse_mtd_partitions(ts7250_mtd, part_probes, &mtd_parts, 0);
- if (mtd_parts_nb > 0)
- part_type = "command line";
- else
- mtd_parts_nb = 0;
-#endif
- if (mtd_parts_nb == 0) {
- mtd_parts = partition_info32;
- if (ts7250_mtd->size >= (128 * 0x100000))
- mtd_parts = partition_info128;
- mtd_parts_nb = NUM_PARTITIONS;
- part_type = "static";
- }
-
- /* Register the partitions */
- printk(KERN_NOTICE "Using %s partition definition\n", part_type);
- add_mtd_partitions(ts7250_mtd, mtd_parts, mtd_parts_nb);
-
- /* Return happy */
- return 0;
-}
-
-module_init(ts7250_init);
-
-/*
- * Clean up routine
- */
-static void __exit ts7250_cleanup(void)
-{
- /* Unregister the device */
- del_mtd_device(ts7250_mtd);
-
- /* Free the MTD device structure */
- kfree(ts7250_mtd);
-}
-
-module_exit(ts7250_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jesse Off <joff@embeddedARM.com>");
-MODULE_DESCRIPTION("MTD map driver for Technologic Systems TS-7250 board");
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index 863513c3b69a..054a41c0ef4a 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -274,7 +274,7 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
struct nand_chip *chip = mtd->priv;
int ret;
- ret = nand_scan_ident(mtd, 1);
+ ret = nand_scan_ident(mtd, 1, NULL);
if (!ret) {
if (mtd->writesize >= 512) {
chip->ecc.size = mtd->writesize;