summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-24 10:34:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-24 10:34:29 -0700
commit2c01e7bc46f10e9190818437e564f7e0db875ae9 (patch)
tree8b06c85d69754f7df27f7fb42520f6e2ceaea907 /drivers/input
parentab11ca34eea8fda7a1a9302d86f6ef6108ffd68f (diff)
parente644dae645e167d154c0526358940986682a72b0 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ...
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/Kconfig17
-rw-r--r--drivers/input/Makefile2
-rw-r--r--drivers/input/evdev.c69
-rw-r--r--drivers/input/gameport/emu10k1-gp.c13
-rw-r--r--drivers/input/gameport/fm801-gp.c16
-rw-r--r--drivers/input/joystick/a3d.c13
-rw-r--r--drivers/input/joystick/adi.c17
-rw-r--r--drivers/input/joystick/cobra.c13
-rw-r--r--drivers/input/joystick/gf2k.c13
-rw-r--r--drivers/input/joystick/grip.c13
-rw-r--r--drivers/input/joystick/grip_mp.c13
-rw-r--r--drivers/input/joystick/guillemot.c13
-rw-r--r--drivers/input/joystick/interact.c13
-rw-r--r--drivers/input/joystick/joydump.c13
-rw-r--r--drivers/input/joystick/magellan.c17
-rw-r--r--drivers/input/joystick/sidewinder.c13
-rw-r--r--drivers/input/joystick/spaceball.c17
-rw-r--r--drivers/input/joystick/spaceorb.c17
-rw-r--r--drivers/input/joystick/stinger.c17
-rw-r--r--drivers/input/joystick/tmdc.c13
-rw-r--r--drivers/input/joystick/twidjoy.c17
-rw-r--r--drivers/input/joystick/warrior.c17
-rw-r--r--drivers/input/joystick/zhenhua.c17
-rw-r--r--drivers/input/keyboard/Kconfig32
-rw-r--r--drivers/input/keyboard/Makefile1
-rw-r--r--drivers/input/keyboard/adp5588-keys.c1
-rw-r--r--drivers/input/keyboard/atkbd.c2
-rw-r--r--drivers/input/keyboard/ep93xx_keypad.c44
-rw-r--r--drivers/input/keyboard/hil_kbd.c13
-rw-r--r--drivers/input/keyboard/imx_keypad.c17
-rw-r--r--drivers/input/keyboard/lkkbd.c17
-rw-r--r--drivers/input/keyboard/lm8333.c235
-rw-r--r--drivers/input/keyboard/matrix_keypad.c99
-rw-r--r--drivers/input/keyboard/newtonkbd.c13
-rw-r--r--drivers/input/keyboard/nomadik-ske-keypad.c20
-rw-r--r--drivers/input/keyboard/omap-keypad.c20
-rw-r--r--drivers/input/keyboard/omap4-keypad.c133
-rw-r--r--drivers/input/keyboard/pmic8xxx-keypad.c20
-rw-r--r--drivers/input/keyboard/samsung-keypad.c20
-rw-r--r--drivers/input/keyboard/spear-keyboard.c92
-rw-r--r--drivers/input/keyboard/stmpe-keypad.c16
-rw-r--r--drivers/input/keyboard/stowaway.c13
-rw-r--r--drivers/input/keyboard/sunkbd.c17
-rw-r--r--drivers/input/keyboard/tc3589x-keypad.c41
-rw-r--r--drivers/input/keyboard/tca8418_keypad.c15
-rw-r--r--drivers/input/keyboard/tegra-kbc.c68
-rw-r--r--drivers/input/keyboard/tnetv107x-keypad.c21
-rw-r--r--drivers/input/keyboard/twl4030_keypad.c25
-rw-r--r--drivers/input/keyboard/w90p910_keypad.c27
-rw-r--r--drivers/input/keyboard/xtkbd.c13
-rw-r--r--drivers/input/matrix-keymap.c163
-rw-r--r--drivers/input/misc/cma3000_d0x.c2
-rw-r--r--drivers/input/misc/mpu3050.c2
-rw-r--r--drivers/input/misc/twl6040-vibra.c46
-rw-r--r--drivers/input/mouse/Kconfig12
-rw-r--r--drivers/input/mouse/Makefile1
-rw-r--r--drivers/input/mouse/alps.c81
-rw-r--r--drivers/input/mouse/alps.h2
-rw-r--r--drivers/input/mouse/navpoint.c369
-rw-r--r--drivers/input/mouse/sentelic.c34
-rw-r--r--drivers/input/mouse/sentelic.h8
-rw-r--r--drivers/input/mouse/sermouse.c13
-rw-r--r--drivers/input/mouse/synaptics.c20
-rw-r--r--drivers/input/mouse/vsxxxaa.c14
-rw-r--r--drivers/input/of_keymap.c87
-rw-r--r--drivers/input/serio/pcips2.c15
-rw-r--r--drivers/input/serio/ps2mult.c13
-rw-r--r--drivers/input/serio/serio_raw.c65
-rw-r--r--drivers/input/serio/xilinx_ps2.c35
-rw-r--r--drivers/input/tablet/aiptek.c2
-rw-r--r--drivers/input/tablet/wacom.h4
-rw-r--r--drivers/input/tablet/wacom_sys.c244
-rw-r--r--drivers/input/tablet/wacom_wac.c304
-rw-r--r--drivers/input/tablet/wacom_wac.h13
-rw-r--r--drivers/input/touchscreen/Kconfig34
-rw-r--r--drivers/input/touchscreen/Makefile2
-rw-r--r--drivers/input/touchscreen/atmel_mxt_ts.c33
-rw-r--r--drivers/input/touchscreen/da9052_tsi.c370
-rw-r--r--drivers/input/touchscreen/dynapro.c17
-rw-r--r--drivers/input/touchscreen/elo.c17
-rw-r--r--drivers/input/touchscreen/fujitsu_ts.c13
-rw-r--r--drivers/input/touchscreen/gunze.c17
-rw-r--r--drivers/input/touchscreen/h3600_ts_input.c17
-rw-r--r--drivers/input/touchscreen/hampshire.c17
-rw-r--r--drivers/input/touchscreen/inexio.c17
-rw-r--r--drivers/input/touchscreen/lpc32xx_ts.c10
-rw-r--r--drivers/input/touchscreen/mtouch.c17
-rw-r--r--drivers/input/touchscreen/penmount.c17
-rw-r--r--drivers/input/touchscreen/st1232.c20
-rw-r--r--drivers/input/touchscreen/touchit213.c17
-rw-r--r--drivers/input/touchscreen/touchright.c17
-rw-r--r--drivers/input/touchscreen/touchwin.c17
-rw-r--r--drivers/input/touchscreen/tsc40.c12
-rw-r--r--drivers/input/touchscreen/wacom_i2c.c282
-rw-r--r--drivers/input/touchscreen/wacom_w8001.c13
95 files changed, 2694 insertions, 1249 deletions
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 332597980817..55f7e57d4e42 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -25,10 +25,6 @@ config INPUT
if INPUT
-config INPUT_OF_MATRIX_KEYMAP
- depends on USE_OF
- bool
-
config INPUT_FF_MEMLESS
tristate "Support for memoryless force-feedback devices"
help
@@ -68,6 +64,19 @@ config INPUT_SPARSEKMAP
To compile this driver as a module, choose M here: the
module will be called sparse-keymap.
+config INPUT_MATRIXKMAP
+ tristate "Matrix keymap support library"
+ help
+ Say Y here if you are using a driver for an input
+ device that uses matrix keymap. This option is only
+ useful for out-of-tree drivers since in-tree drivers
+ select it automatically.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called matrix-keymap.
+
comment "Userland interfaces"
config INPUT_MOUSEDEV
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index b173a13a73ca..5ca3f631497f 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -10,6 +10,7 @@ input-core-y := input.o input-compat.o input-mt.o ff-core.o
obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o
obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o
+obj-$(CONFIG_INPUT_MATRIXKMAP) += matrix-keymap.o
obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o
obj-$(CONFIG_INPUT_JOYDEV) += joydev.o
@@ -24,4 +25,3 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/
obj-$(CONFIG_INPUT_MISC) += misc/
obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o
-obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 4b2e10d5d641..6c58bfff01a3 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -180,7 +180,10 @@ static int evdev_grab(struct evdev *evdev, struct evdev_client *client)
static int evdev_ungrab(struct evdev *evdev, struct evdev_client *client)
{
- if (evdev->grab != client)
+ struct evdev_client *grab = rcu_dereference_protected(evdev->grab,
+ lockdep_is_held(&evdev->mutex));
+
+ if (grab != client)
return -EINVAL;
rcu_assign_pointer(evdev->grab, NULL);
@@ -259,8 +262,7 @@ static int evdev_release(struct inode *inode, struct file *file)
struct evdev *evdev = client->evdev;
mutex_lock(&evdev->mutex);
- if (evdev->grab == client)
- evdev_ungrab(evdev, client);
+ evdev_ungrab(evdev, client);
mutex_unlock(&evdev->mutex);
evdev_detach_client(evdev, client);
@@ -343,7 +345,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
struct input_event event;
int retval = 0;
- if (count < input_event_size())
+ if (count != 0 && count < input_event_size())
return -EINVAL;
retval = mutex_lock_interruptible(&evdev->mutex);
@@ -355,7 +357,8 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
goto out;
}
- do {
+ while (retval + input_event_size() <= count) {
+
if (input_event_from_user(buffer + retval, &event)) {
retval = -EFAULT;
goto out;
@@ -364,7 +367,7 @@ static ssize_t evdev_write(struct file *file, const char __user *buffer,
input_inject_event(&evdev->handle,
event.type, event.code, event.value);
- } while (retval + input_event_size() <= count);
+ }
out:
mutex_unlock(&evdev->mutex);
@@ -395,35 +398,49 @@ static ssize_t evdev_read(struct file *file, char __user *buffer,
struct evdev_client *client = file->private_data;
struct evdev *evdev = client->evdev;
struct input_event event;
- int retval = 0;
+ size_t read = 0;
+ int error;
- if (count < input_event_size())
+ if (count != 0 && count < input_event_size())
return -EINVAL;
- if (!(file->f_flags & O_NONBLOCK)) {
- retval = wait_event_interruptible(evdev->wait,
- client->packet_head != client->tail ||
- !evdev->exist);
- if (retval)
- return retval;
- }
+ for (;;) {
+ if (!evdev->exist)
+ return -ENODEV;
- if (!evdev->exist)
- return -ENODEV;
+ if (client->packet_head == client->tail &&
+ (file->f_flags & O_NONBLOCK))
+ return -EAGAIN;
- while (retval + input_event_size() <= count &&
- evdev_fetch_next_event(client, &event)) {
+ /*
+ * count == 0 is special - no IO is done but we check
+ * for error conditions (see above).
+ */
+ if (count == 0)
+ break;
- if (input_event_to_user(buffer + retval, &event))
- return -EFAULT;
+ while (read + input_event_size() <= count &&
+ evdev_fetch_next_event(client, &event)) {
- retval += input_event_size();
- }
+ if (input_event_to_user(buffer + read, &event))
+ return -EFAULT;
- if (retval == 0 && (file->f_flags & O_NONBLOCK))
- return -EAGAIN;
+ read += input_event_size();
+ }
- return retval;
+ if (read)
+ break;
+
+ if (!(file->f_flags & O_NONBLOCK)) {
+ error = wait_event_interruptible(evdev->wait,
+ client->packet_head != client->tail ||
+ !evdev->exist);
+ if (error)
+ return error;
+ }
+ }
+
+ return read;
}
/* No kernel lock - fine */
diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index 422aa0a6b77f..daceafe7ee7d 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -125,15 +125,4 @@ static struct pci_driver emu_driver = {
.remove = __devexit_p(emu_remove),
};
-static int __init emu_init(void)
-{
- return pci_register_driver(&emu_driver);
-}
-
-static void __exit emu_exit(void)
-{
- pci_unregister_driver(&emu_driver);
-}
-
-module_init(emu_init);
-module_exit(emu_exit);
+module_pci_driver(emu_driver);
diff --git a/drivers/input/gameport/fm801-gp.c b/drivers/input/gameport/fm801-gp.c
index a3b70ff21018..48ad3829ff20 100644
--- a/drivers/input/gameport/fm801-gp.c
+++ b/drivers/input/gameport/fm801-gp.c
@@ -144,6 +144,7 @@ static const struct pci_device_id fm801_gp_id_table[] = {
{ PCI_VENDOR_ID_FORTEMEDIA, PCI_DEVICE_ID_FM801_GP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0 }
};
+MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
static struct pci_driver fm801_gp_driver = {
.name = "FM801_gameport",
@@ -152,20 +153,7 @@ static struct pci_driver fm801_gp_driver = {
.remove = __devexit_p(fm801_gp_remove),
};
-static int __init fm801_gp_init(void)
-{
- return pci_register_driver(&fm801_gp_driver);
-}
-
-static void __exit fm801_gp_exit(void)
-{
- pci_unregister_driver(&fm801_gp_driver);
-}
-
-module_init(fm801_gp_init);
-module_exit(fm801_gp_exit);
-
-MODULE_DEVICE_TABLE(pci, fm801_gp_id_table);
+module_pci_driver(fm801_gp_driver);
MODULE_DESCRIPTION("FM801 gameport driver");
MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 1639ab2b94b7..85bc8dc07cfc 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -413,15 +413,4 @@ static struct gameport_driver a3d_drv = {
.disconnect = a3d_disconnect,
};
-static int __init a3d_init(void)
-{
- return gameport_register_driver(&a3d_drv);
-}
-
-static void __exit a3d_exit(void)
-{
- gameport_unregister_driver(&a3d_drv);
-}
-
-module_init(a3d_init);
-module_exit(a3d_exit);
+module_gameport_driver(a3d_drv);
diff --git a/drivers/input/joystick/adi.c b/drivers/input/joystick/adi.c
index b992fbf91f2f..0cbfd2dfabf4 100644
--- a/drivers/input/joystick/adi.c
+++ b/drivers/input/joystick/adi.c
@@ -557,10 +557,6 @@ static void adi_disconnect(struct gameport *gameport)
kfree(port);
}
-/*
- * The gameport device structure.
- */
-
static struct gameport_driver adi_drv = {
.driver = {
.name = "adi",
@@ -570,15 +566,4 @@ static struct gameport_driver adi_drv = {
.disconnect = adi_disconnect,
};
-static int __init adi_init(void)
-{
- return gameport_register_driver(&adi_drv);
-}
-
-static void __exit adi_exit(void)
-{
- gameport_unregister_driver(&adi_drv);
-}
-
-module_init(adi_init);
-module_exit(adi_exit);
+module_gameport_driver(adi_drv);
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 3497b87c3d05..65367e44d715 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -261,15 +261,4 @@ static struct gameport_driver cobra_drv = {
.disconnect = cobra_disconnect,
};
-static int __init cobra_init(void)
-{
- return gameport_register_driver(&cobra_drv);
-}
-
-static void __exit cobra_exit(void)
-{
- gameport_unregister_driver(&cobra_drv);
-}
-
-module_init(cobra_init);
-module_exit(cobra_exit);
+module_gameport_driver(cobra_drv);
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 0536b1b2f018..ab1cf2882004 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -373,15 +373,4 @@ static struct gameport_driver gf2k_drv = {
.disconnect = gf2k_disconnect,
};
-static int __init gf2k_init(void)
-{
- return gameport_register_driver(&gf2k_drv);
-}
-
-static void __exit gf2k_exit(void)
-{
- gameport_unregister_driver(&gf2k_drv);
-}
-
-module_init(gf2k_init);
-module_exit(gf2k_exit);
+module_gameport_driver(gf2k_drv);
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index fc55899ba6c5..9e1beff57c33 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -424,15 +424,4 @@ static struct gameport_driver grip_drv = {
.disconnect = grip_disconnect,
};
-static int __init grip_init(void)
-{
- return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
- gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index 2d47baf47769..c0f9c7b7eb4e 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -687,15 +687,4 @@ static struct gameport_driver grip_drv = {
.disconnect = grip_disconnect,
};
-static int __init grip_init(void)
-{
- return gameport_register_driver(&grip_drv);
-}
-
-static void __exit grip_exit(void)
-{
- gameport_unregister_driver(&grip_drv);
-}
-
-module_init(grip_init);
-module_exit(grip_exit);
+module_gameport_driver(grip_drv);
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index 4058d4b272fe..55196f730af6 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -281,15 +281,4 @@ static struct gameport_driver guillemot_drv = {
.disconnect = guillemot_disconnect,
};
-static int __init guillemot_init(void)
-{
- return gameport_register_driver(&guillemot_drv);
-}
-
-static void __exit guillemot_exit(void)
-{
- gameport_unregister_driver(&guillemot_drv);
-}
-
-module_init(guillemot_init);
-module_exit(guillemot_exit);
+module_gameport_driver(guillemot_drv);
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index 16fb19d1ca25..88c22623a2e8 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -311,15 +311,4 @@ static struct gameport_driver interact_drv = {
.disconnect = interact_disconnect,
};
-static int __init interact_init(void)
-{
- return gameport_register_driver(&interact_drv);
-}
-
-static void __exit interact_exit(void)
-{
- gameport_unregister_driver(&interact_drv);
-}
-
-module_init(interact_init);
-module_exit(interact_exit);
+module_gameport_driver(interact_drv);
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index cd894a0564a2..7eb878bab968 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -159,15 +159,4 @@ static struct gameport_driver joydump_drv = {
.disconnect = joydump_disconnect,
};
-static int __init joydump_init(void)
-{
- return gameport_register_driver(&joydump_drv);
-}
-
-static void __exit joydump_exit(void)
-{
- gameport_unregister_driver(&joydump_drv);
-}
-
-module_init(joydump_init);
-module_exit(joydump_exit);
+module_gameport_driver(joydump_drv);
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 40e40780747d..9fb153eef2fc 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -222,19 +222,4 @@ static struct serio_driver magellan_drv = {
.disconnect = magellan_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init magellan_init(void)
-{
- return serio_register_driver(&magellan_drv);
-}
-
-static void __exit magellan_exit(void)
-{
- serio_unregister_driver(&magellan_drv);
-}
-
-module_init(magellan_init);
-module_exit(magellan_exit);
+module_serio_driver(magellan_drv);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index b8d86115644b..04c69af37148 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -820,15 +820,4 @@ static struct gameport_driver sw_drv = {
.disconnect = sw_disconnect,
};
-static int __init sw_init(void)
-{
- return gameport_register_driver(&sw_drv);
-}
-
-static void __exit sw_exit(void)
-{
- gameport_unregister_driver(&sw_drv);
-}
-
-module_init(sw_init);
-module_exit(sw_exit);
+module_gameport_driver(sw_drv);
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index 0cd9b29356a8..80a7b27a457a 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -296,19 +296,4 @@ static struct serio_driver spaceball_drv = {
.disconnect = spaceball_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceball_init(void)
-{
- return serio_register_driver(&spaceball_drv);
-}
-
-static void __exit spaceball_exit(void)
-{
- serio_unregister_driver(&spaceball_drv);
-}
-
-module_init(spaceball_init);
-module_exit(spaceball_exit);
+module_serio_driver(spaceball_drv);
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index a694bf8e557b..a41f291652e6 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -237,19 +237,4 @@ static struct serio_driver spaceorb_drv = {
.disconnect = spaceorb_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init spaceorb_init(void)
-{
- return serio_register_driver(&spaceorb_drv);
-}
-
-static void __exit spaceorb_exit(void)
-{
- serio_unregister_driver(&spaceorb_drv);
-}
-
-module_init(spaceorb_init);
-module_exit(spaceorb_exit);
+module_serio_driver(spaceorb_drv);
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index e0db9f5e4b41..0f51a60e14a7 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -208,19 +208,4 @@ static struct serio_driver stinger_drv = {
.disconnect = stinger_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init stinger_init(void)
-{
- return serio_register_driver(&stinger_drv);
-}
-
-static void __exit stinger_exit(void)
-{
- serio_unregister_driver(&stinger_drv);
-}
-
-module_init(stinger_init);
-module_exit(stinger_exit);
+module_serio_driver(stinger_drv);
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index d6c609807115..5ef9bcdb0345 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -436,15 +436,4 @@ static struct gameport_driver tmdc_drv = {
.disconnect = tmdc_disconnect,
};
-static int __init tmdc_init(void)
-{
- return gameport_register_driver(&tmdc_drv);
-}
-
-static void __exit tmdc_exit(void)
-{
- gameport_unregister_driver(&tmdc_drv);
-}
-
-module_init(tmdc_init);
-module_exit(tmdc_exit);
+module_gameport_driver(tmdc_drv);
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 3f4ec73c9553..2556a8193579 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -257,19 +257,4 @@ static struct serio_driver twidjoy_drv = {
.disconnect = twidjoy_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init twidjoy_init(void)
-{
- return serio_register_driver(&twidjoy_drv);
-}
-
-static void __exit twidjoy_exit(void)
-{
- serio_unregister_driver(&twidjoy_drv);
-}
-
-module_init(twidjoy_init);
-module_exit(twidjoy_exit);
+module_serio_driver(twidjoy_drv);
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index f72c83e15e60..23b3071abb6e 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -217,19 +217,4 @@ static struct serio_driver warrior_drv = {
.disconnect = warrior_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init warrior_init(void)
-{
- return serio_register_driver(&warrior_drv);
-}
-
-static void __exit warrior_exit(void)
-{
- serio_unregister_driver(&warrior_drv);
-}
-
-module_init(warrior_init);
-module_exit(warrior_exit);
+module_serio_driver(warrior_drv);
diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c
index b5853125c898..c4de4388fd7f 100644
--- a/drivers/input/joystick/zhenhua.c
+++ b/drivers/input/joystick/zhenhua.c
@@ -225,19 +225,4 @@ static struct serio_driver zhenhua_drv = {
.disconnect = zhenhua_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init zhenhua_init(void)
-{
- return serio_register_driver(&zhenhua_drv);
-}
-
-static void __exit zhenhua_exit(void)
-{
- serio_unregister_driver(&zhenhua_drv);
-}
-
-module_init(zhenhua_init);
-module_exit(zhenhua_exit);
+module_serio_driver(zhenhua_drv);
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index f354813a13e8..c0e11ecc646f 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -166,6 +166,7 @@ config KEYBOARD_LKKBD
config KEYBOARD_EP93XX
tristate "EP93xx Matrix Keypad support"
depends on ARCH_EP93XX
+ select INPUT_MATRIXKMAP
help
Say Y here to enable the matrix keypad on the Cirrus EP93XX.
@@ -224,6 +225,7 @@ config KEYBOARD_TCA6416
config KEYBOARD_TCA8418
tristate "TCA8418 Keypad Support"
depends on I2C
+ select INPUT_MATRIXKMAP
help
This driver implements basic keypad functionality
for keys connected through TCA8418 keypad decoder.
@@ -240,6 +242,7 @@ config KEYBOARD_TCA8418
config KEYBOARD_MATRIX
tristate "GPIO driven matrix keypad support"
depends on GENERIC_GPIO
+ select INPUT_MATRIXKMAP
help
Enable support for GPIO driven matrix keypad.
@@ -309,6 +312,17 @@ config KEYBOARD_LM8323
To compile this driver as a module, choose M here: the
module will be called lm8323.
+config KEYBOARD_LM8333
+ tristate "LM8333 keypad chip"
+ depends on I2C
+ select INPUT_MATRIXKMAP
+ help
+ If you say yes here you get support for the National Semiconductor
+ LM8333 keypad controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lm8333.
+
config KEYBOARD_LOCOMO
tristate "LoCoMo Keyboard Support"
depends on SHARP_LOCOMO
@@ -366,6 +380,7 @@ config KEYBOARD_MPR121
config KEYBOARD_IMX
tristate "IMX keypad support"
depends on ARCH_MXC
+ select INPUT_MATRIXKMAP
help
Enable support for IMX keypad port.
@@ -384,6 +399,7 @@ config KEYBOARD_NEWTON
config KEYBOARD_NOMADIK
tristate "ST-Ericsson Nomadik SKE keyboard"
depends on PLAT_NOMADIK
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use a keypad provided on the SKE controller
used on the Ux500 and Nomadik platforms
@@ -394,7 +410,7 @@ config KEYBOARD_NOMADIK
config KEYBOARD_TEGRA
tristate "NVIDIA Tegra internal matrix keyboard controller support"
depends on ARCH_TEGRA
- select INPUT_OF_MATRIX_KEYMAP if USE_OF
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use a matrix keyboard connected directly
to the internal keyboard controller on Tegra SoCs.
@@ -432,6 +448,7 @@ config KEYBOARD_PXA930_ROTARY
config KEYBOARD_PMIC8XXX
tristate "Qualcomm PMIC8XXX keypad support"
depends on MFD_PM8XXX
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to enable the driver for the PMIC8XXX
keypad provided as a reference design from Qualcomm. This is intended
@@ -443,6 +460,7 @@ config KEYBOARD_PMIC8XXX
config KEYBOARD_SAMSUNG
tristate "Samsung keypad support"
depends on HAVE_CLK
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad on your Samsung mobile
device.
@@ -485,6 +503,7 @@ config KEYBOARD_SH_KEYSC
config KEYBOARD_STMPE
tristate "STMPE keypad support"
depends on MFD_STMPE
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad controller on STMPE I/O
expanders.
@@ -505,6 +524,7 @@ config KEYBOARD_DAVINCI
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
depends on (ARCH_OMAP1 || ARCH_OMAP2)
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the OMAP keypad.
@@ -512,9 +532,10 @@ config KEYBOARD_OMAP
module will be called omap-keypad.
config KEYBOARD_OMAP4
- tristate "TI OMAP4 keypad support"
+ tristate "TI OMAP4+ keypad support"
+ select INPUT_MATRIXKMAP
help
- Say Y here if you want to use the OMAP4 keypad.
+ Say Y here if you want to use the OMAP4+ keypad.
To compile this driver as a module, choose M here: the
module will be called omap4-keypad.
@@ -522,6 +543,7 @@ config KEYBOARD_OMAP4
config KEYBOARD_SPEAR
tristate "ST SPEAR keyboard support"
depends on PLAT_SPEAR
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the SPEAR keyboard.
@@ -531,6 +553,7 @@ config KEYBOARD_SPEAR
config KEYBOARD_TC3589X
tristate "TC3589X Keypad support"
depends on MFD_TC3589X
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad controller on
TC35892/3 I/O expander.
@@ -541,6 +564,7 @@ config KEYBOARD_TC3589X
config KEYBOARD_TNETV107X
tristate "TI TNETV107X keypad support"
depends on ARCH_DAVINCI_TNETV107X
+ select INPUT_MATRIXKMAP
help
Say Y here if you want to use the TNETV107X keypad.
@@ -550,6 +574,7 @@ config KEYBOARD_TNETV107X
config KEYBOARD_TWL4030
tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
depends on TWL4030_CORE
+ select INPUT_MATRIXKMAP
help
Say Y here if your board use the keypad controller on
TWL4030 family chips. It's safe to say enable this
@@ -573,6 +598,7 @@ config KEYBOARD_XTKBD
config KEYBOARD_W90P910
tristate "W90P910 Matrix Keypad support"
depends on ARCH_W90X900
+ select INPUT_MATRIXKMAP
help
Say Y here to enable the matrix keypad on evaluation board
based on W90P910.
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index df7061f12918..b03b02456a82 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
+obj-$(CONFIG_KEYBOARD_LM8333) += lm8333.o
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 39ebffac207e..b083bf10f139 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -197,6 +197,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
kpad->gc.base = gpio_data->gpio_start;
kpad->gc.label = kpad->client->name;
kpad->gc.owner = THIS_MODULE;
+ kpad->gc.names = gpio_data->names;
mutex_init(&kpad->gpio_lock);
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index e05a2e7073c6..add5ffd9fe26 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -433,7 +433,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
if (printk_ratelimit())
dev_warn(&serio->dev,
"Spurious %s on %s. "
- "Some program might be trying access hardware directly.\n",
+ "Some program might be trying to access hardware directly.\n",
data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
goto out;
case ATKBD_RET_ERR:
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index 0ba69f3fcb52..c46fc8185469 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -182,16 +182,10 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
}
-#ifdef CONFIG_PM
-/*
- * NOTE: I don't know if this is correct, or will work on the ep93xx.
- *
- * None of the existing ep93xx drivers have power management support.
- * But, this is basically what the pxa27x_keypad driver does.
- */
-static int ep93xx_keypad_suspend(struct platform_device *pdev,
- pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int ep93xx_keypad_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
@@ -210,8 +204,9 @@ static int ep93xx_keypad_suspend(struct platform_device *pdev,
return 0;
}
-static int ep93xx_keypad_resume(struct platform_device *pdev)
+static int ep93xx_keypad_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
@@ -232,10 +227,10 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
return 0;
}
-#else /* !CONFIG_PM */
-#define ep93xx_keypad_suspend NULL
-#define ep93xx_keypad_resume NULL
-#endif /* !CONFIG_PM */
+#endif
+
+static SIMPLE_DEV_PM_OPS(ep93xx_keypad_pm_ops,
+ ep93xx_keypad_suspend, ep93xx_keypad_resume);
static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
{
@@ -308,19 +303,16 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
input_dev->open = ep93xx_keypad_open;
input_dev->close = ep93xx_keypad_close;
input_dev->dev.parent = &pdev->dev;
- input_dev->keycode = keypad->keycodes;
- input_dev->keycodesize = sizeof(keypad->keycodes[0]);
- input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
- input_set_drvdata(input_dev, keypad);
+ err = matrix_keypad_build_keymap(keymap_data, NULL,
+ EP93XX_MATRIX_ROWS, EP93XX_MATRIX_COLS,
+ keypad->keycodes, input_dev);
+ if (err)
+ goto failed_free_dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
if (keypad->pdata->flags & EP93XX_KEYPAD_AUTOREPEAT)
- input_dev->evbit[0] |= BIT_MASK(EV_REP);
-
- matrix_keypad_build_keymap(keymap_data, 3,
- input_dev->keycode, input_dev->keybit);
- platform_set_drvdata(pdev, keypad);
+ __set_bit(EV_REP, input_dev->evbit);
+ input_set_drvdata(input_dev, keypad);
err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
0, pdev->name, keypad);
@@ -331,6 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
if (err)
goto failed_free_irq;
+ platform_set_drvdata(pdev, keypad);
device_init_wakeup(&pdev->dev, 1);
return 0;
@@ -384,11 +377,10 @@ static struct platform_driver ep93xx_keypad_driver = {
.driver = {
.name = "ep93xx-keypad",
.owner = THIS_MODULE,
+ .pm = &ep93xx_keypad_pm_ops,
},
.probe = ep93xx_keypad_probe,
.remove = __devexit_p(ep93xx_keypad_remove),
- .suspend = ep93xx_keypad_suspend,
- .resume = ep93xx_keypad_resume,
};
module_platform_driver(ep93xx_keypad_driver);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index fed31e0947a1..589e3c258f3f 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -583,15 +583,4 @@ static struct serio_driver hil_serio_drv = {
.interrupt = hil_dev_interrupt
};
-static int __init hil_dev_init(void)
-{
- return serio_register_driver(&hil_serio_drv);
-}
-
-static void __exit hil_dev_exit(void)
-{
- serio_unregister_driver(&hil_serio_drv);
-}
-
-module_init(hil_dev_init);
-module_exit(hil_dev_exit);
+module_serio_driver(hil_serio_drv);
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index fb87b3bcadb9..6ee7421e2321 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -481,7 +481,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
}
if (keypad->rows_en_mask > ((1 << MAX_MATRIX_KEY_ROWS) - 1) ||
- keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
+ keypad->cols_en_mask > ((1 << MAX_MATRIX_KEY_COLS) - 1)) {
dev_err(&pdev->dev,
"invalid key data (too many rows or colums)\n");
error = -EINVAL;
@@ -496,14 +496,17 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
input_dev->dev.parent = &pdev->dev;
input_dev->open = imx_keypad_open;
input_dev->close = imx_keypad_close;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
- input_dev->keycode = keypad->keycodes;
- input_dev->keycodesize = sizeof(keypad->keycodes[0]);
- input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
- matrix_keypad_build_keymap(keymap_data, MATRIX_ROW_SHIFT,
- keypad->keycodes, input_dev->keybit);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ MAX_MATRIX_KEY_ROWS,
+ MAX_MATRIX_KEY_COLS,
+ keypad->keycodes, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto failed_clock_put;
+ }
+ __set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_set_drvdata(input_dev, keypad);
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index fa9bb6d235e2..fc0a63c2f278 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -731,19 +731,4 @@ static struct serio_driver lkkbd_drv = {
.interrupt = lkkbd_interrupt,
};
-/*
- * The functions for insering/removing us as a module.
- */
-static int __init lkkbd_init(void)
-{
- return serio_register_driver(&lkkbd_drv);
-}
-
-static void __exit lkkbd_exit(void)
-{
- serio_unregister_driver(&lkkbd_drv);
-}
-
-module_init(lkkbd_init);
-module_exit(lkkbd_exit);
-
+module_serio_driver(lkkbd_drv);
diff --git a/drivers/input/keyboard/lm8333.c b/drivers/input/keyboard/lm8333.c
new file mode 100644
index 000000000000..ca168a6679de
--- /dev/null
+++ b/drivers/input/keyboard/lm8333.c
@@ -0,0 +1,235 @@
+/*
+ * LM8333 keypad driver
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/input/lm8333.h>
+
+#define LM8333_FIFO_READ 0x20
+#define LM8333_DEBOUNCE 0x22
+#define LM8333_READ_INT 0xD0
+#define LM8333_ACTIVE 0xE4
+#define LM8333_READ_ERROR 0xF0
+
+#define LM8333_KEYPAD_IRQ (1 << 0)
+#define LM8333_ERROR_IRQ (1 << 3)
+
+#define LM8333_ERROR_KEYOVR 0x04
+#define LM8333_ERROR_FIFOOVR 0x40
+
+#define LM8333_FIFO_TRANSFER_SIZE 16
+
+#define LM8333_NUM_ROWS 8
+#define LM8333_NUM_COLS 16
+#define LM8333_ROW_SHIFT 4
+
+struct lm8333 {
+ struct i2c_client *client;
+ struct input_dev *input;
+ unsigned short keycodes[LM8333_NUM_ROWS << LM8333_ROW_SHIFT];
+};
+
+/* The accessors try twice because the first access may be needed for wakeup */
+#define LM8333_READ_RETRIES 2
+
+int lm8333_read8(struct lm8333 *lm8333, u8 cmd)
+{
+ int retries = 0, ret;
+
+ do {
+ ret = i2c_smbus_read_byte_data(lm8333->client, cmd);
+ } while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+ return ret;
+}
+
+int lm8333_write8(struct lm8333 *lm8333, u8 cmd, u8 val)
+{
+ int retries = 0, ret;
+
+ do {
+ ret = i2c_smbus_write_byte_data(lm8333->client, cmd, val);
+ } while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+ return ret;
+}
+
+int lm8333_read_block(struct lm8333 *lm8333, u8 cmd, u8 len, u8 *buf)
+{
+ int retries = 0, ret;
+
+ do {
+ ret = i2c_smbus_read_i2c_block_data(lm8333->client,
+ cmd, len, buf);
+ } while (ret < 0 && retries++ < LM8333_READ_RETRIES);
+
+ return ret;
+}
+
+static void lm8333_key_handler(struct lm8333 *lm8333)
+{
+ struct input_dev *input = lm8333->input;
+ u8 keys[LM8333_FIFO_TRANSFER_SIZE];
+ u8 code, pressed;
+ int i, ret;
+
+ ret = lm8333_read_block(lm8333, LM8333_FIFO_READ,
+ LM8333_FIFO_TRANSFER_SIZE, keys);
+ if (ret != LM8333_FIFO_TRANSFER_SIZE) {
+ dev_err(&lm8333->client->dev,
+ "Error %d while reading FIFO\n", ret);
+ return;
+ }
+
+ for (i = 0; keys[i] && i < LM8333_FIFO_TRANSFER_SIZE; i++) {
+ pressed = keys[i] & 0x80;
+ code = keys[i] & 0x7f;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, lm8333->keycodes[code], pressed);
+ }
+
+ input_sync(input);
+}
+
+static irqreturn_t lm8333_irq_thread(int irq, void *data)
+{
+ struct lm8333 *lm8333 = data;
+ u8 status = lm8333_read8(lm8333, LM8333_READ_INT);
+
+ if (!status)
+ return IRQ_NONE;
+
+ if (status & LM8333_ERROR_IRQ) {
+ u8 err = lm8333_read8(lm8333, LM8333_READ_ERROR);
+
+ if (err & (LM8333_ERROR_KEYOVR | LM8333_ERROR_FIFOOVR)) {
+ u8 dummy[LM8333_FIFO_TRANSFER_SIZE];
+
+ lm8333_read_block(lm8333, LM8333_FIFO_READ,
+ LM8333_FIFO_TRANSFER_SIZE, dummy);
+ }
+ dev_err(&lm8333->client->dev, "Got error %02x\n", err);
+ }
+
+ if (status & LM8333_KEYPAD_IRQ)
+ lm8333_key_handler(lm8333);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit lm8333_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct lm8333_platform_data *pdata = client->dev.platform_data;
+ struct lm8333 *lm8333;
+ struct input_dev *input;
+ int err, active_time;
+
+ if (!pdata)
+ return -EINVAL;
+
+ active_time = pdata->active_time ?: 500;
+ if (active_time / 3 <= pdata->debounce_time / 3) {
+ dev_err(&client->dev, "Active time not big enough!\n");
+ return -EINVAL;
+ }
+
+ lm8333 = kzalloc(sizeof(*lm8333), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!lm8333 || !input) {
+ err = -ENOMEM;
+ goto free_mem;
+ }
+
+ lm8333->client = client;
+ lm8333->input = input;
+
+ input->name = client->name;
+ input->dev.parent = &client->dev;
+ input->id.bustype = BUS_I2C;
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ err = matrix_keypad_build_keymap(pdata->matrix_data, NULL,
+ LM8333_NUM_ROWS, LM8333_NUM_COLS,
+ lm8333->keycodes, input);
+ if (err)
+ goto free_mem;
+
+ if (pdata->debounce_time) {
+ err = lm8333_write8(lm8333, LM8333_DEBOUNCE,
+ pdata->debounce_time / 3);
+ if (err)
+ dev_warn(&client->dev, "Unable to set debounce time\n");
+ }
+
+ if (pdata->active_time) {
+ err = lm8333_write8(lm8333, LM8333_ACTIVE,
+ pdata->active_time / 3);
+ if (err)
+ dev_warn(&client->dev, "Unable to set active time\n");
+ }
+
+ err = request_threaded_irq(client->irq, NULL, lm8333_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lm8333", lm8333);
+ if (err)
+ goto free_mem;
+
+ err = input_register_device(input);
+ if (err)
+ goto free_irq;
+
+ i2c_set_clientdata(client, lm8333);
+ return 0;
+
+ free_irq:
+ free_irq(client->irq, lm8333);
+ free_mem:
+ input_free_device(input);
+ kfree(lm8333);
+ return err;
+}
+
+static int __devexit lm8333_remove(struct i2c_client *client)
+{
+ struct lm8333 *lm8333 = i2c_get_clientdata(client);
+
+ free_irq(client->irq, lm8333);
+ input_unregister_device(lm8333->input);
+ kfree(lm8333);
+
+ return 0;
+}
+
+static const struct i2c_device_id lm8333_id[] = {
+ { "lm8333", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lm8333_id);
+
+static struct i2c_driver lm8333_driver = {
+ .driver = {
+ .name = "lm8333",
+ .owner = THIS_MODULE,
+ },
+ .probe = lm8333_probe,
+ .remove = __devexit_p(lm8333_remove),
+ .id_table = lm8333_id,
+};
+module_i2c_driver(lm8333_driver);
+
+MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("LM8333 keyboard driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 9b223d73de32..18b72372028a 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -27,7 +27,6 @@
struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
struct input_dev *input_dev;
- unsigned short *keycodes;
unsigned int row_shift;
DECLARE_BITMAP(disabled_gpios, MATRIX_MAX_ROWS);
@@ -38,6 +37,8 @@ struct matrix_keypad {
bool scan_pending;
bool stopped;
bool gpio_all_disabled;
+
+ unsigned short keycodes[];
};
/*
@@ -224,7 +225,7 @@ static void matrix_keypad_stop(struct input_dev *dev)
disable_row_irqs(keypad);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
{
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
@@ -293,16 +294,16 @@ static int matrix_keypad_resume(struct device *dev)
return 0;
}
-
-static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
- matrix_keypad_suspend, matrix_keypad_resume);
#endif
-static int __devinit init_matrix_gpio(struct platform_device *pdev,
- struct matrix_keypad *keypad)
+static SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+ matrix_keypad_suspend, matrix_keypad_resume);
+
+static int __devinit matrix_keypad_init_gpio(struct platform_device *pdev,
+ struct matrix_keypad *keypad)
{
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
- int i, err = -EINVAL;
+ int i, err;
/* initialized strobe lines as outputs, activated */
for (i = 0; i < pdata->num_col_gpios; i++) {
@@ -348,8 +349,7 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
"matrix-keypad", keypad);
if (err) {
dev_err(&pdev->dev,
- "Unable to acquire interrupt "
- "for GPIO line %i\n",
+ "Unable to acquire interrupt for GPIO line %i\n",
pdata->row_gpios[i]);
goto err_free_irqs;
}
@@ -375,14 +375,33 @@ err_free_cols:
return err;
}
+static void matrix_keypad_free_gpio(struct matrix_keypad *keypad)
+{
+ const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+ int i;
+
+ if (pdata->clustered_irq > 0) {
+ free_irq(pdata->clustered_irq, keypad);
+ } else {
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
+ }
+
+ for (i = 0; i < pdata->num_row_gpios; i++)
+ gpio_free(pdata->row_gpios[i]);
+
+ for (i = 0; i < pdata->num_col_gpios; i++)
+ gpio_free(pdata->col_gpios[i]);
+}
+
static int __devinit matrix_keypad_probe(struct platform_device *pdev)
{
const struct matrix_keypad_platform_data *pdata;
const struct matrix_keymap_data *keymap_data;
struct matrix_keypad *keypad;
struct input_dev *input_dev;
- unsigned short *keycodes;
unsigned int row_shift;
+ size_t keymap_size;
int err;
pdata = pdev->dev.platform_data;
@@ -398,20 +417,18 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
}
row_shift = get_count_order(pdata->num_col_gpios);
-
- keypad = kzalloc(sizeof(struct matrix_keypad), GFP_KERNEL);
- keycodes = kzalloc((pdata->num_row_gpios << row_shift) *
- sizeof(*keycodes),
- GFP_KERNEL);
+ keymap_size = (pdata->num_row_gpios << row_shift) *
+ sizeof(keypad->keycodes[0]);
+ keypad = kzalloc(sizeof(struct matrix_keypad) + keymap_size,
+ GFP_KERNEL);
input_dev = input_allocate_device();
- if (!keypad || !keycodes || !input_dev) {
+ if (!keypad || !input_dev) {
err = -ENOMEM;
goto err_free_mem;
}
keypad->input_dev = input_dev;
keypad->pdata = pdata;
- keypad->keycodes = keycodes;
keypad->row_shift = row_shift;
keypad->stopped = true;
INIT_DELAYED_WORK(&keypad->work, matrix_keypad_scan);
@@ -420,38 +437,38 @@ static int __devinit matrix_keypad_probe(struct platform_device *pdev)
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
- if (!pdata->no_autorepeat)
- input_dev->evbit[0] |= BIT_MASK(EV_REP);
input_dev->open = matrix_keypad_start;
input_dev->close = matrix_keypad_stop;
- input_dev->keycode = keycodes;
- input_dev->keycodesize = sizeof(*keycodes);
- input_dev->keycodemax = pdata->num_row_gpios << row_shift;
-
- matrix_keypad_build_keymap(keymap_data, row_shift,
- input_dev->keycode, input_dev->keybit);
+ err = matrix_keypad_build_keymap(keymap_data, NULL,
+ pdata->num_row_gpios,
+ pdata->num_col_gpios,
+ keypad->keycodes, input_dev);
+ if (err)
+ goto err_free_mem;
+ if (!pdata->no_autorepeat)
+ __set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_set_drvdata(input_dev, keypad);
- err = init_matrix_gpio(pdev, keypad);
+ err = matrix_keypad_init_gpio(pdev, keypad);
if (err)
goto err_free_mem;
err = input_register_device(keypad->input_dev);
if (err)
- goto err_free_mem;
+ goto err_free_gpio;
device_init_wakeup(&pdev->dev, pdata->wakeup);
platform_set_drvdata(pdev, keypad);
return 0;
+err_free_gpio:
+ matrix_keypad_free_gpio(keypad);
err_free_mem:
input_free_device(input_dev);
- kfree(keycodes);
kfree(keypad);
return err;
}
@@ -459,29 +476,15 @@ err_free_mem:
static int __devexit matrix_keypad_remove(struct platform_device *pdev)
{
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
- const struct matrix_keypad_platform_data *pdata = keypad->pdata;
- int i;
device_init_wakeup(&pdev->dev, 0);
- if (pdata->clustered_irq > 0) {
- free_irq(pdata->clustered_irq, keypad);
- } else {
- for (i = 0; i < pdata->num_row_gpios; i++)
- free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
- }
-
- for (i = 0; i < pdata->num_row_gpios; i++)
- gpio_free(pdata->row_gpios[i]);
-
- for (i = 0; i < pdata->num_col_gpios; i++)
- gpio_free(pdata->col_gpios[i]);
-
+ matrix_keypad_free_gpio(keypad);
input_unregister_device(keypad->input_dev);
- platform_set_drvdata(pdev, NULL);
- kfree(keypad->keycodes);
kfree(keypad);
+ platform_set_drvdata(pdev, NULL);
+
return 0;
}
@@ -491,9 +494,7 @@ static struct platform_driver matrix_keypad_driver = {
.driver = {
.name = "matrix-keypad",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &matrix_keypad_pm_ops,
-#endif
},
};
module_platform_driver(matrix_keypad_driver);
diff --git a/drivers/input/keyboard/newtonkbd.c b/drivers/input/keyboard/newtonkbd.c
index 48d1cab0aa1c..f971898ad591 100644
--- a/drivers/input/keyboard/newtonkbd.c
+++ b/drivers/input/keyboard/newtonkbd.c
@@ -166,15 +166,4 @@ static struct serio_driver nkbd_drv = {
.disconnect = nkbd_disconnect,
};
-static int __init nkbd_init(void)
-{
- return serio_register_driver(&nkbd_drv);
-}
-
-static void __exit nkbd_exit(void)
-{
- serio_unregister_driver(&nkbd_drv);
-}
-
-module_init(nkbd_init);
-module_exit(nkbd_exit);
+module_serio_driver(nkbd_drv);
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 101e245944e7..4ea4341a68c5 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -39,7 +39,8 @@
#define SKE_KPRISA (0x1 << 2)
#define SKE_KEYPAD_ROW_SHIFT 3
-#define SKE_KPD_KEYMAP_SIZE (8 * 8)
+#define SKE_KPD_NUM_ROWS 8
+#define SKE_KPD_NUM_COLS 8
/* keypad auto scan registers */
#define SKE_ASR0 0x20
@@ -63,7 +64,7 @@ struct ske_keypad {
void __iomem *reg_base;
struct input_dev *input;
const struct ske_keypad_platform_data *board;
- unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+ unsigned short keymap[SKE_KPD_NUM_ROWS * SKE_KPD_NUM_COLS];
struct clk *clk;
spinlock_t ske_keypad_lock;
};
@@ -261,19 +262,18 @@ static int __init ske_keypad_probe(struct platform_device *pdev)
input->name = "ux500-ske-keypad";
input->dev.parent = &pdev->dev;
- input->keycode = keypad->keymap;
- input->keycodesize = sizeof(keypad->keymap[0]);
- input->keycodemax = ARRAY_SIZE(keypad->keymap);
+ error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+ SKE_KPD_NUM_ROWS, SKE_KPD_NUM_COLS,
+ keypad->keymap, input);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to build keymap\n");
+ goto err_iounmap;
+ }
input_set_capability(input, EV_MSC, MSC_SCAN);
-
- __set_bit(EV_KEY, input->evbit);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
- input->keycode, input->keybit);
-
clk_enable(keypad->clk);
/* go through board initialization helpers */
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 6b630d9d3dff..a0222db4dc86 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -61,6 +61,7 @@ struct omap_kp {
unsigned int cols;
unsigned long delay;
unsigned int debounce;
+ unsigned short keymap[];
};
static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
@@ -316,13 +317,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
if (!cpu_is_omap24xx())
omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
- input_dev->keycode = &omap_kp[1];
- input_dev->keycodesize = sizeof(unsigned short);
- input_dev->keycodemax = keycodemax;
-
- if (pdata->rep)
- __set_bit(EV_REP, input_dev->evbit);
-
if (pdata->delay)
omap_kp->delay = pdata->delay;
@@ -371,9 +365,6 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
goto err2;
/* setup input device */
- __set_bit(EV_KEY, input_dev->evbit);
- matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
- input_dev->keycode, input_dev->keybit);
input_dev->name = "omap-keypad";
input_dev->phys = "omap-keypad/input0";
input_dev->dev.parent = &pdev->dev;
@@ -383,6 +374,15 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
+ if (pdata->rep)
+ __set_bit(EV_REP, input_dev->evbit);
+
+ ret = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+ pdata->rows, pdata->cols,
+ omap_kp->keymap, input_dev);
+ if (ret < 0)
+ goto err3;
+
ret = input_register_device(omap_kp->input);
if (ret < 0) {
printk(KERN_ERR "Unable to register omap-keypad input device\n");
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index e809ac095a38..aed5f6999ce2 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -68,19 +68,52 @@
#define OMAP4_MASK_IRQSTATUSDISABLE 0xFFFF
+enum {
+ KBD_REVISION_OMAP4 = 0,
+ KBD_REVISION_OMAP5,
+};
+
struct omap4_keypad {
struct input_dev *input;
void __iomem *base;
- int irq;
+ unsigned int irq;
unsigned int rows;
unsigned int cols;
+ u32 reg_offset;
+ u32 irqreg_offset;
unsigned int row_shift;
unsigned char key_state[8];
unsigned short keymap[];
};
+static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
+{
+ return __raw_readl(keypad_data->base +
+ keypad_data->reg_offset + offset);
+}
+
+static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
+{
+ __raw_writel(value,
+ keypad_data->base + keypad_data->reg_offset + offset);
+}
+
+static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
+{
+ return __raw_readl(keypad_data->base +
+ keypad_data->irqreg_offset + offset);
+}
+
+static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
+ u32 offset, u32 value)
+{
+ __raw_writel(value,
+ keypad_data->base + keypad_data->irqreg_offset + offset);
+}
+
+
/* Interrupt handler */
static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
{
@@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
u32 *new_state = (u32 *) key_state;
/* Disable interrupts */
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_VAL_IRQDISABLE);
- *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
- *(new_state + 1) = __raw_readl(keypad_data->base
- + OMAP4_KBD_FULLCODE63_32);
+ *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
+ *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
for (row = 0; row < keypad_data->rows; row++) {
changed = key_state[row] ^ keypad_data->key_state[row];
@@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
sizeof(keypad_data->key_state));
/* clear pending interrupts */
- __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
/* enable interrupts */
- __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_DEF_IRQENABLE_EVENTEN |
+ OMAP4_DEF_IRQENABLE_LONGKEY);
return IRQ_HANDLED;
}
@@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
disable_irq(keypad_data->irq);
- __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
- keypad_data->base + OMAP4_KBD_CTRL);
- __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
- keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
- __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
- __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
- keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
+ kbd_writel(keypad_data, OMAP4_KBD_CTRL,
+ OMAP4_VAL_FUNCTIONALCFG);
+ kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
+ OMAP4_VAL_DEBOUNCINGTIME);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ OMAP4_VAL_IRQDISABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_DEF_IRQENABLE_EVENTEN |
+ OMAP4_DEF_IRQENABLE_LONGKEY);
+ kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
+ OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
enable_irq(keypad_data->irq);
@@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
disable_irq(keypad_data->irq);
/* Disable interrupts */
- __raw_writel(OMAP4_VAL_IRQDISABLE,
- keypad_data->base + OMAP4_KBD_IRQENABLE);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
+ OMAP4_VAL_IRQDISABLE);
/* clear pending interrupts */
- __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
- keypad_data->base + OMAP4_KBD_IRQSTATUS);
+ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
+ kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
enable_irq(keypad_data->irq);
@@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
struct resource *res;
resource_size_t size;
unsigned int row_shift, max_keys;
+ int rev;
int irq;
int error;
@@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
keypad_data->rows = pdata->rows;
keypad_data->cols = pdata->cols;
+ /*
+ * Enable clocks for the keypad module so that we can read
+ * revision register.
+ */
+ pm_runtime_enable(&pdev->dev);
+ error = pm_runtime_get_sync(&pdev->dev);
+ if (error) {
+ dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
+ goto err_unmap;
+ }
+ rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
+ rev &= 0x03 << 30;
+ rev >>= 30;
+ switch (rev) {
+ case KBD_REVISION_OMAP4:
+ keypad_data->reg_offset = 0x00;
+ keypad_data->irqreg_offset = 0x00;
+ break;
+ case KBD_REVISION_OMAP5:
+ keypad_data->reg_offset = 0x10;
+ keypad_data->irqreg_offset = 0x0c;
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "Keypad reports unsupported revision %d", rev);
+ error = -EINVAL;
+ goto err_pm_put_sync;
+ }
+
/* input device allocation */
keypad_data->input = input_dev = input_allocate_device();
if (!input_dev) {
error = -ENOMEM;
- goto err_unmap;
+ goto err_pm_put_sync;
}
input_dev->name = pdev->name;
@@ -258,20 +322,19 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
input_dev->open = omap4_keypad_open;
input_dev->close = omap4_keypad_close;
- input_dev->keycode = keypad_data->keymap;
- input_dev->keycodesize = sizeof(keypad_data->keymap[0]);
- input_dev->keycodemax = max_keys;
+ error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+ pdata->rows, pdata->cols,
+ keypad_data->keymap, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err_free_input;
+ }
- __set_bit(EV_KEY, input_dev->evbit);
__set_bit(EV_REP, input_dev->evbit);
-
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_set_drvdata(input_dev, keypad_data);
- matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
- input_dev->keycode, input_dev->keybit);
-
error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
IRQF_TRIGGER_RISING,
"omap4-keypad", keypad_data);
@@ -280,7 +343,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
goto err_free_input;
}
- pm_runtime_enable(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
error = input_register_device(keypad_data->input);
if (error < 0) {
@@ -296,6 +359,8 @@ err_pm_disable:
free_irq(keypad_data->irq, keypad_data);
err_free_input:
input_free_device(input_dev);
+err_pm_put_sync:
+ pm_runtime_put_sync(&pdev->dev);
err_unmap:
iounmap(keypad_data->base);
err_release_mem:
diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
index 01a1c9f8a383..52c34657d301 100644
--- a/drivers/input/keyboard/pmic8xxx-keypad.c
+++ b/drivers/input/keyboard/pmic8xxx-keypad.c
@@ -626,21 +626,21 @@ static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev)
kp->input->id.product = 0x0001;
kp->input->id.vendor = 0x0001;
- kp->input->evbit[0] = BIT_MASK(EV_KEY);
-
- if (pdata->rep)
- __set_bit(EV_REP, kp->input->evbit);
-
- kp->input->keycode = kp->keycodes;
- kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE;
- kp->input->keycodesize = sizeof(kp->keycodes);
kp->input->open = pmic8xxx_kp_open;
kp->input->close = pmic8xxx_kp_close;
- matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT,
- kp->input->keycode, kp->input->keybit);
+ rc = matrix_keypad_build_keymap(keymap_data, NULL,
+ PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS,
+ kp->keycodes, kp->input);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err_get_irq;
+ }
+ if (pdata->rep)
+ __set_bit(EV_REP, kp->input->evbit);
input_set_capability(kp->input, EV_MSC, MSC_SCAN);
+
input_set_drvdata(kp->input, kp);
/* initialize keypad state */
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index 2391ae884fee..a061ba603a29 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -454,23 +454,23 @@ static int __devinit samsung_keypad_probe(struct platform_device *pdev)
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
- input_set_drvdata(input_dev, keypad);
input_dev->open = samsung_keypad_open;
input_dev->close = samsung_keypad_close;
- input_dev->evbit[0] = BIT_MASK(EV_KEY);
- if (!pdata->no_autorepeat)
- input_dev->evbit[0] |= BIT_MASK(EV_REP);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ pdata->rows, pdata->cols,
+ keypad->keycodes, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err_put_clk;
+ }
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ if (!pdata->no_autorepeat)
+ __set_bit(EV_REP, input_dev->evbit);
- input_dev->keycode = keypad->keycodes;
- input_dev->keycodesize = sizeof(keypad->keycodes[0]);
- input_dev->keycodemax = pdata->rows << row_shift;
-
- matrix_keypad_build_keymap(keymap_data, row_shift,
- input_dev->keycode, input_dev->keybit);
+ input_set_drvdata(input_dev, keypad);
keypad->irq = platform_get_irq(pdev, 0);
if (keypad->irq < 0) {
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 3b6b528f02fd..6f287f7e1538 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -19,6 +19,7 @@
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeup.h>
#include <linux/slab.h>
@@ -49,7 +50,9 @@
#define KEY_VALUE 0x00FFFFFF
#define ROW_MASK 0xF0
#define COLUMN_MASK 0x0F
-#define ROW_SHIFT 4
+#define NUM_ROWS 16
+#define NUM_COLS 16
+
#define KEY_MATRIX_SHIFT 6
struct spear_kbd {
@@ -60,7 +63,8 @@ struct spear_kbd {
unsigned int irq;
unsigned int mode;
unsigned short last_key;
- unsigned short keycodes[256];
+ unsigned short keycodes[NUM_ROWS * NUM_COLS];
+ bool rep;
};
static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -136,27 +140,49 @@ static void spear_kbd_close(struct input_dev *dev)
kbd->last_key = KEY_RESERVED;
}
-static int __devinit spear_kbd_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int __devinit spear_kbd_parse_dt(struct platform_device *pdev,
+ struct spear_kbd *kbd)
{
- const struct kbd_platform_data *pdata = pdev->dev.platform_data;
- const struct matrix_keymap_data *keymap;
- struct spear_kbd *kbd;
- struct input_dev *input_dev;
- struct resource *res;
- int irq;
+ struct device_node *np = pdev->dev.of_node;
int error;
+ u32 val;
- if (!pdata) {
- dev_err(&pdev->dev, "Invalid platform data\n");
+ if (!np) {
+ dev_err(&pdev->dev, "Missing DT data\n");
return -EINVAL;
}
- keymap = pdata->keymap;
- if (!keymap) {
- dev_err(&pdev->dev, "no keymap defined\n");
- return -EINVAL;
+ if (of_property_read_bool(np, "autorepeat"))
+ kbd->rep = true;
+
+ error = of_property_read_u32(np, "st,mode", &val);
+ if (error) {
+ dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
+ return error;
}
+ kbd->mode = val;
+ return 0;
+}
+#else
+static inline int spear_kbd_parse_dt(struct platform_device *pdev,
+ struct spear_kbd *kbd)
+{
+ return -ENOSYS;
+}
+#endif
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+ struct kbd_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ const struct matrix_keymap_data *keymap = pdata ? pdata->keymap : NULL;
+ struct spear_kbd *kbd;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int irq;
+ int error;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no keyboard resource defined\n");
@@ -179,7 +205,15 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
kbd->input = input_dev;
kbd->irq = irq;
- kbd->mode = pdata->mode;
+
+ if (!pdata) {
+ error = spear_kbd_parse_dt(pdev, kbd);
+ if (error)
+ goto err_free_mem;
+ } else {
+ kbd->mode = pdata->mode;
+ kbd->rep = pdata->rep;
+ }
kbd->res = request_mem_region(res->start, resource_size(res),
pdev->name);
@@ -212,18 +246,17 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev)
input_dev->open = spear_kbd_open;
input_dev->close = spear_kbd_close;
- __set_bit(EV_KEY, input_dev->evbit);
- if (pdata->rep)
+ error = matrix_keypad_build_keymap(keymap, NULL, NUM_ROWS, NUM_COLS,
+ kbd->keycodes, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to build keymap\n");
+ goto err_put_clk;
+ }
+
+ if (kbd->rep)
__set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
- input_dev->keycode = kbd->keycodes;
- input_dev->keycodesize = sizeof(kbd->keycodes[0]);
- input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
-
- matrix_keypad_build_keymap(keymap, ROW_SHIFT,
- input_dev->keycode, input_dev->keybit);
-
input_set_drvdata(input_dev, kbd);
error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
@@ -317,6 +350,14 @@ static int spear_kbd_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume);
+#ifdef CONFIG_OF
+static const struct of_device_id spear_kbd_id_table[] = {
+ { .compatible = "st,spear300-kbd" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, spear_kbd_id_table);
+#endif
+
static struct platform_driver spear_kbd_driver = {
.probe = spear_kbd_probe,
.remove = __devexit_p(spear_kbd_remove),
@@ -324,6 +365,7 @@ static struct platform_driver spear_kbd_driver = {
.name = "keyboard",
.owner = THIS_MODULE,
.pm = &spear_kbd_pm_ops,
+ .of_match_table = of_match_ptr(spear_kbd_id_table),
},
};
module_platform_driver(spear_kbd_driver);
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
index 9397cf9c625c..470a8778dec1 100644
--- a/drivers/input/keyboard/stmpe-keypad.c
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -289,19 +289,17 @@ static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
input->id.bustype = BUS_I2C;
input->dev.parent = &pdev->dev;
- input_set_capability(input, EV_MSC, MSC_SCAN);
+ ret = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+ STMPE_KEYPAD_MAX_ROWS,
+ STMPE_KEYPAD_MAX_COLS,
+ keypad->keymap, input);
+ if (ret)
+ goto out_freeinput;
- __set_bit(EV_KEY, input->evbit);
+ input_set_capability(input, EV_MSC, MSC_SCAN);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- input->keycode = keypad->keymap;
- input->keycodesize = sizeof(keypad->keymap[0]);
- input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
- matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
- input->keycode, input->keybit);
-
for (i = 0; i < plat->keymap_data->keymap_size; i++) {
unsigned int key = plat->keymap_data->keymap[i];
diff --git a/drivers/input/keyboard/stowaway.c b/drivers/input/keyboard/stowaway.c
index 7437219370b1..cc612c5d5427 100644
--- a/drivers/input/keyboard/stowaway.c
+++ b/drivers/input/keyboard/stowaway.c
@@ -170,15 +170,4 @@ static struct serio_driver skbd_drv = {
.disconnect = skbd_disconnect,
};
-static int __init skbd_init(void)
-{
- return serio_register_driver(&skbd_drv);
-}
-
-static void __exit skbd_exit(void)
-{
- serio_unregister_driver(&skbd_drv);
-}
-
-module_init(skbd_init);
-module_exit(skbd_exit);
+module_serio_driver(skbd_drv);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index a99a04b03ee4..5f836b1638c1 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -369,19 +369,4 @@ static struct serio_driver sunkbd_drv = {
.disconnect = sunkbd_disconnect,
};
-/*
- * The functions for insering/removing us as a module.
- */
-
-static int __init sunkbd_init(void)
-{
- return serio_register_driver(&sunkbd_drv);
-}
-
-static void __exit sunkbd_exit(void)
-{
- serio_unregister_driver(&sunkbd_drv);
-}
-
-module_init(sunkbd_init);
-module_exit(sunkbd_exit);
+module_serio_driver(sunkbd_drv);
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
index 2dee3e4e7c6f..7d498e698508 100644
--- a/drivers/input/keyboard/tc3589x-keypad.c
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -78,7 +78,7 @@
* @input: pointer to input device object
* @board: keypad platform device
* @krow: number of rows
- * @kcol: number of coloumns
+ * @kcol: number of columns
* @keymap: matrix scan code table for keycodes
* @keypad_stopped: holds keypad status
*/
@@ -96,21 +96,15 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
{
int ret;
struct tc3589x *tc3589x = keypad->tc3589x;
- u8 settle_time = keypad->board->settle_time;
- u8 dbounce_period = keypad->board->debounce_period;
- u8 rows = keypad->board->krow & 0xf; /* mask out the nibble */
- u8 column = keypad->board->kcol & 0xf; /* mask out the nibble */
-
- /* validate platform configurations */
- if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
- keypad->board->krow > TC3589x_MAX_KPROW ||
- keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
- keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+ const struct tc3589x_keypad_platform_data *board = keypad->board;
+
+ /* validate platform configuration */
+ if (board->kcol > TC3589x_MAX_KPCOL || board->krow > TC3589x_MAX_KPROW)
return -EINVAL;
/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
- (rows << KP_ROW_SHIFT) | column);
+ (board->krow << KP_ROW_SHIFT) | board->kcol);
if (ret < 0)
return ret;
@@ -124,12 +118,14 @@ static int tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
return ret;
/* Configure settle time */
- ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG,
+ board->settle_time);
if (ret < 0)
return ret;
/* Configure debounce time */
- ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+ ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE,
+ board->debounce_period);
if (ret < 0)
return ret;
@@ -337,23 +333,22 @@ static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
input->name = pdev->name;
input->dev.parent = &pdev->dev;
- input->keycode = keypad->keymap;
- input->keycodesize = sizeof(keypad->keymap[0]);
- input->keycodemax = ARRAY_SIZE(keypad->keymap);
-
input->open = tc3589x_keypad_open;
input->close = tc3589x_keypad_close;
- input_set_drvdata(input, keypad);
+ error = matrix_keypad_build_keymap(plat->keymap_data, NULL,
+ TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL,
+ keypad->keymap, input);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to build keymap\n");
+ goto err_free_mem;
+ }
input_set_capability(input, EV_MSC, MSC_SCAN);
-
- __set_bit(EV_KEY, input->evbit);
if (!plat->no_autorepeat)
__set_bit(EV_REP, input->evbit);
- matrix_keypad_build_keymap(plat->keymap_data, 0x3,
- input->keycode, input->keybit);
+ input_set_drvdata(input, keypad);
error = request_threaded_irq(irq, NULL,
tc3589x_keypad_irq, plat->irqtype,
diff --git a/drivers/input/keyboard/tca8418_keypad.c b/drivers/input/keyboard/tca8418_keypad.c
index 958ec107bfbc..5f87b28b3192 100644
--- a/drivers/input/keyboard/tca8418_keypad.c
+++ b/drivers/input/keyboard/tca8418_keypad.c
@@ -342,21 +342,20 @@ static int __devinit tca8418_keypad_probe(struct i2c_client *client,
input->id.product = 0x001;
input->id.version = 0x0001;
- input->keycode = keypad_data->keymap;
- input->keycodesize = sizeof(keypad_data->keymap[0]);
- input->keycodemax = max_keys;
+ error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
+ pdata->rows, pdata->cols,
+ keypad_data->keymap, input);
+ if (error) {
+ dev_dbg(&client->dev, "Failed to build keymap\n");
+ goto fail2;
+ }
- __set_bit(EV_KEY, input->evbit);
if (pdata->rep)
__set_bit(EV_REP, input->evbit);
-
input_set_capability(input, EV_MSC, MSC_SCAN);
input_set_drvdata(input, keypad_data);
- matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
- input->keycode, input->keybit);
-
if (pdata->irq_is_gpio)
client->irq = gpio_to_irq(client->irq);
diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c
index fe4ac95ca6c8..4ffe64d53107 100644
--- a/drivers/input/keyboard/tegra-kbc.c
+++ b/drivers/input/keyboard/tegra-kbc.c
@@ -619,8 +619,8 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata,
}
#ifdef CONFIG_OF
-static struct tegra_kbc_platform_data * __devinit
-tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
+static struct tegra_kbc_platform_data * __devinit tegra_kbc_dt_parse_pdata(
+ struct platform_device *pdev)
{
struct tegra_kbc_platform_data *pdata;
struct device_node *np = pdev->dev.of_node;
@@ -660,10 +660,6 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev)
pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL;
}
- pdata->keymap_data = matrix_keyboard_of_fill_keymap(np, "linux,keymap");
-
- /* FIXME: Add handling of linux,fn-keymap here */
-
return pdata;
}
#else
@@ -674,10 +670,36 @@ static inline struct tegra_kbc_platform_data *tegra_kbc_dt_parse_pdata(
}
#endif
+static int __devinit tegra_kbd_setup_keymap(struct tegra_kbc *kbc)
+{
+ const struct tegra_kbc_platform_data *pdata = kbc->pdata;
+ const struct matrix_keymap_data *keymap_data = pdata->keymap_data;
+ unsigned int keymap_rows = KBC_MAX_KEY;
+ int retval;
+
+ if (keymap_data && pdata->use_fn_map)
+ keymap_rows *= 2;
+
+ retval = matrix_keypad_build_keymap(keymap_data, NULL,
+ keymap_rows, KBC_MAX_COL,
+ kbc->keycode, kbc->idev);
+ if (retval == -ENOSYS || retval == -ENOENT) {
+ /*
+ * If there is no OF support in kernel or keymap
+ * property is missing, use default keymap.
+ */
+ retval = matrix_keypad_build_keymap(
+ &tegra_kbc_default_keymap_data, NULL,
+ keymap_rows, KBC_MAX_COL,
+ kbc->keycode, kbc->idev);
+ }
+
+ return retval;
+}
+
static int __devinit tegra_kbc_probe(struct platform_device *pdev)
{
const struct tegra_kbc_platform_data *pdata = pdev->dev.platform_data;
- const struct matrix_keymap_data *keymap_data;
struct tegra_kbc *kbc;
struct input_dev *input_dev;
struct resource *res;
@@ -757,29 +779,26 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
kbc->repoll_dly = KBC_ROW_SCAN_DLY + scan_time_rows + pdata->repeat_cnt;
kbc->repoll_dly = DIV_ROUND_UP(kbc->repoll_dly, KBC_CYCLE_MS);
+ kbc->wakeup_key = pdata->wakeup_key;
+ kbc->use_fn_map = pdata->use_fn_map;
+ kbc->use_ghost_filter = pdata->use_ghost_filter;
+
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
input_dev->open = tegra_kbc_open;
input_dev->close = tegra_kbc_close;
- input_set_drvdata(input_dev, kbc);
+ err = tegra_kbd_setup_keymap(kbc);
+ if (err) {
+ dev_err(&pdev->dev, "failed to setup keymap\n");
+ goto err_put_clk;
+ }
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ __set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
- input_dev->keycode = kbc->keycode;
- input_dev->keycodesize = sizeof(kbc->keycode[0]);
- input_dev->keycodemax = KBC_MAX_KEY;
- if (pdata->use_fn_map)
- input_dev->keycodemax *= 2;
-
- kbc->use_fn_map = pdata->use_fn_map;
- kbc->use_ghost_filter = pdata->use_ghost_filter;
- keymap_data = pdata->keymap_data ?: &tegra_kbc_default_keymap_data;
- matrix_keypad_build_keymap(keymap_data, KBC_ROW_SHIFT,
- input_dev->keycode, input_dev->keybit);
- kbc->wakeup_key = pdata->wakeup_key;
+ input_set_drvdata(input_dev, kbc);
err = request_irq(kbc->irq, tegra_kbc_isr,
IRQF_NO_SUSPEND | IRQF_TRIGGER_HIGH, pdev->name, kbc);
@@ -799,9 +818,6 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, kbc);
device_init_wakeup(&pdev->dev, pdata->wakeup);
- if (!pdev->dev.platform_data)
- matrix_keyboard_of_free_keymap(pdata->keymap_data);
-
return 0;
err_free_irq:
@@ -816,10 +832,8 @@ err_free_mem:
input_free_device(input_dev);
kfree(kbc);
err_free_pdata:
- if (!pdev->dev.platform_data) {
- matrix_keyboard_of_free_keymap(pdata->keymap_data);
+ if (!pdev->dev.platform_data)
kfree(pdata);
- }
return err;
}
diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c
index fb39c94b6fdd..a4a445fb7020 100644
--- a/drivers/input/keyboard/tnetv107x-keypad.c
+++ b/drivers/input/keyboard/tnetv107x-keypad.c
@@ -247,15 +247,11 @@ static int __devinit keypad_probe(struct platform_device *pdev)
error = -ENOMEM;
goto error_input;
}
- input_set_drvdata(kp->input_dev, kp);
kp->input_dev->name = pdev->name;
kp->input_dev->dev.parent = &pdev->dev;
kp->input_dev->open = keypad_start;
kp->input_dev->close = keypad_stop;
- kp->input_dev->evbit[0] = BIT_MASK(EV_KEY);
- if (!pdata->no_autorepeat)
- kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
clk_enable(kp->clk);
rev = keypad_read(kp, rev);
@@ -264,15 +260,20 @@ static int __devinit keypad_probe(struct platform_device *pdev)
kp->input_dev->id.version = ((rev >> 16) & 0xfff);
clk_disable(kp->clk);
- kp->input_dev->keycode = kp->keycodes;
- kp->input_dev->keycodesize = sizeof(kp->keycodes[0]);
- kp->input_dev->keycodemax = kp->rows << kp->row_shift;
-
- matrix_keypad_build_keymap(keymap_data, kp->row_shift, kp->keycodes,
- kp->input_dev->keybit);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ kp->rows, kp->cols,
+ kp->keycodes, kp->input_dev);
+ if (error) {
+ dev_err(dev, "Failed to build keymap\n");
+ goto error_reg;
+ }
+ if (!pdata->no_autorepeat)
+ kp->input_dev->evbit[0] |= BIT_MASK(EV_REP);
input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(kp->input_dev, kp);
+
error = input_register_device(kp->input_dev);
if (error < 0) {
dev_err(dev, "Could not register input device\n");
diff --git a/drivers/input/keyboard/twl4030_keypad.c b/drivers/input/keyboard/twl4030_keypad.c
index 67bec14e8b96..a2c6f79aa101 100644
--- a/drivers/input/keyboard/twl4030_keypad.c
+++ b/drivers/input/keyboard/twl4030_keypad.c
@@ -361,14 +361,6 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
kp->irq = platform_get_irq(pdev, 0);
/* setup input device */
- __set_bit(EV_KEY, input->evbit);
-
- /* Enable auto repeat feature of Linux input subsystem */
- if (pdata->rep)
- __set_bit(EV_REP, input->evbit);
-
- input_set_capability(input, EV_MSC, MSC_SCAN);
-
input->name = "TWL4030 Keypad";
input->phys = "twl4030_keypad/input0";
input->dev.parent = &pdev->dev;
@@ -378,12 +370,19 @@ static int __devinit twl4030_kp_probe(struct platform_device *pdev)
input->id.product = 0x0001;
input->id.version = 0x0003;
- input->keycode = kp->keymap;
- input->keycodesize = sizeof(kp->keymap[0]);
- input->keycodemax = ARRAY_SIZE(kp->keymap);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ TWL4030_MAX_ROWS,
+ 1 << TWL4030_ROW_SHIFT,
+ kp->keymap, input);
+ if (error) {
+ dev_err(kp->dbg_dev, "Failed to build keymap\n");
+ goto err1;
+ }
- matrix_keypad_build_keymap(keymap_data, TWL4030_ROW_SHIFT,
- input->keycode, input->keybit);
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+ /* Enable auto repeat feature of Linux input subsystem */
+ if (pdata->rep)
+ __set_bit(EV_REP, input->evbit);
error = input_register_device(input);
if (error) {
diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
index 99bbb7e775ae..085ede4d972d 100644
--- a/drivers/input/keyboard/w90p910_keypad.c
+++ b/drivers/input/keyboard/w90p910_keypad.c
@@ -42,7 +42,8 @@
#define KGET_RAW(n) (((n) & KEY0R) >> 3)
#define KGET_COLUMN(n) ((n) & KEY0C)
-#define W90P910_MAX_KEY_NUM (8 * 8)
+#define W90P910_NUM_ROWS 8
+#define W90P910_NUM_COLS 8
#define W90P910_ROW_SHIFT 3
struct w90p910_keypad {
@@ -51,7 +52,7 @@ struct w90p910_keypad {
struct input_dev *input_dev;
void __iomem *mmio_base;
int irq;
- unsigned short keymap[W90P910_MAX_KEY_NUM];
+ unsigned short keymap[W90P910_NUM_ROWS * W90P910_NUM_COLS];
};
static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
@@ -190,17 +191,13 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
input_dev->close = w90p910_keypad_close;
input_dev->dev.parent = &pdev->dev;
- input_dev->keycode = keypad->keymap;
- input_dev->keycodesize = sizeof(keypad->keymap[0]);
- input_dev->keycodemax = ARRAY_SIZE(keypad->keymap);
-
- input_set_drvdata(input_dev, keypad);
-
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
- input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
- matrix_keypad_build_keymap(keymap_data, W90P910_ROW_SHIFT,
- input_dev->keycode, input_dev->keybit);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ W90P910_NUM_ROWS, W90P910_NUM_COLS,
+ keypad->keymap, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto failed_put_clk;
+ }
error = request_irq(keypad->irq, w90p910_keypad_irq_handler,
0, pdev->name, keypad);
@@ -209,6 +206,10 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
goto failed_put_clk;
}
+ __set_bit(EV_REP, input_dev->evbit);
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
/* Register the input device */
error = input_register_device(input_dev);
if (error) {
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 37b01d777a4a..d050d9d0011b 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -169,15 +169,4 @@ static struct serio_driver xtkbd_drv = {
.disconnect = xtkbd_disconnect,
};
-static int __init xtkbd_init(void)
-{
- return serio_register_driver(&xtkbd_drv);
-}
-
-static void __exit xtkbd_exit(void)
-{
- serio_unregister_driver(&xtkbd_drv);
-}
-
-module_init(xtkbd_init);
-module_exit(xtkbd_exit);
+module_serio_driver(xtkbd_drv);
diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c
new file mode 100644
index 000000000000..443ad64b7f2a
--- /dev/null
+++ b/drivers/input/matrix-keymap.c
@@ -0,0 +1,163 @@
+/*
+ * Helpers for matrix keyboard bindings
+ *
+ * Copyright (C) 2012 Google, Inc
+ *
+ * Author:
+ * Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/input/matrix_keypad.h>
+
+static bool matrix_keypad_map_key(struct input_dev *input_dev,
+ unsigned int rows, unsigned int cols,
+ unsigned int row_shift, unsigned int key)
+{
+ unsigned short *keymap = input_dev->keycode;
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned short code = KEY_VAL(key);
+
+ if (row >= rows || col >= cols) {
+ dev_err(input_dev->dev.parent,
+ "%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n",
+ __func__, key, row, col, rows, cols);
+ return false;
+ }
+
+ keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
+ __set_bit(code, input_dev->keybit);
+
+ return true;
+}
+
+#ifdef CONFIG_OF
+static int matrix_keypad_parse_of_keymap(const char *propname,
+ unsigned int rows, unsigned int cols,
+ struct input_dev *input_dev)
+{
+ struct device *dev = input_dev->dev.parent;
+ struct device_node *np = dev->of_node;
+ unsigned int row_shift = get_count_order(cols);
+ unsigned int max_keys = rows << row_shift;
+ unsigned int proplen, i, size;
+ const __be32 *prop;
+
+ if (!np)
+ return -ENOENT;
+
+ if (!propname)
+ propname = "linux,keymap";
+
+ prop = of_get_property(np, propname, &proplen);
+ if (!prop) {
+ dev_err(dev, "OF: %s property not defined in %s\n",
+ propname, np->full_name);
+ return -ENOENT;
+ }
+
+ if (proplen % sizeof(u32)) {
+ dev_err(dev, "OF: Malformed keycode property %s in %s\n",
+ propname, np->full_name);
+ return -EINVAL;
+ }
+
+ size = proplen / sizeof(u32);
+ if (size > max_keys) {
+ dev_err(dev, "OF: %s size overflow\n", propname);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < size; i++) {
+ unsigned int key = be32_to_cpup(prop + i);
+
+ if (!matrix_keypad_map_key(input_dev, rows, cols,
+ row_shift, key))
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int matrix_keypad_parse_of_keymap(const char *propname,
+ unsigned int rows, unsigned int cols,
+ struct input_dev *input_dev)
+{
+ return -ENOSYS;
+}
+#endif
+
+/**
+ * matrix_keypad_build_keymap - convert platform keymap into matrix keymap
+ * @keymap_data: keymap supplied by the platform code
+ * @keymap_name: name of device tree property containing keymap (if device
+ * tree support is enabled).
+ * @rows: number of rows in target keymap array
+ * @cols: number of cols in target keymap array
+ * @keymap: expanded version of keymap that is suitable for use by
+ * matrix keyboard driver
+ * @input_dev: input devices for which we are setting up the keymap
+ *
+ * This function converts platform keymap (encoded with KEY() macro) into
+ * an array of keycodes that is suitable for using in a standard matrix
+ * keyboard driver that uses row and col as indices.
+ *
+ * If @keymap_data is not supplied and device tree support is enabled
+ * it will attempt load the keymap from property specified by @keymap_name
+ * argument (or "linux,keymap" if @keymap_name is %NULL).
+ *
+ * Callers are expected to set up input_dev->dev.parent before calling this
+ * function.
+ */
+int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data,
+ const char *keymap_name,
+ unsigned int rows, unsigned int cols,
+ unsigned short *keymap,
+ struct input_dev *input_dev)
+{
+ unsigned int row_shift = get_count_order(cols);
+ int i;
+ int error;
+
+ input_dev->keycode = keymap;
+ input_dev->keycodesize = sizeof(*keymap);
+ input_dev->keycodemax = rows << row_shift;
+
+ __set_bit(EV_KEY, input_dev->evbit);
+
+ if (keymap_data) {
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+
+ if (!matrix_keypad_map_key(input_dev, rows, cols,
+ row_shift, key))
+ return -EINVAL;
+ }
+ } else {
+ error = matrix_keypad_parse_of_keymap(keymap_name, rows, cols,
+ input_dev);
+ if (error)
+ return error;
+ }
+
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ return 0;
+}
+EXPORT_SYMBOL(matrix_keypad_build_keymap);
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
index 06517e60e50c..a3735a01e9fd 100644
--- a/drivers/input/misc/cma3000_d0x.c
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -318,7 +318,7 @@ struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
mutex_init(&data->mutex);
data->mode = pdata->mode;
- if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+ if (data->mode > CMAMODE_POFF) {
data->mode = CMAMODE_MOTDET;
dev_warn(dev,
"Invalid mode specified, assuming Motion Detect\n");
diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c
index 5403c571b6a5..306f84c2d8fb 100644
--- a/drivers/input/misc/mpu3050.c
+++ b/drivers/input/misc/mpu3050.c
@@ -367,7 +367,7 @@ static int __devinit mpu3050_probe(struct i2c_client *client,
error = request_threaded_irq(client->irq,
NULL, mpu3050_interrupt_thread,
- IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
"mpu3050", sensor);
if (error) {
dev_err(&client->dev,
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 14e94f56cb7d..c34f6c0371c4 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -27,6 +27,7 @@
*/
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/workqueue.h>
#include <linux/input.h>
#include <linux/mfd/twl6040.h>
@@ -258,10 +259,13 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
{
struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
+ struct device_node *node = pdev->dev.of_node;
struct vibra_info *info;
+ int vddvibl_uV = 0;
+ int vddvibr_uV = 0;
int ret;
- if (!pdata) {
+ if (!pdata && !node) {
dev_err(&pdev->dev, "platform_data not available\n");
return -EINVAL;
}
@@ -273,11 +277,26 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
}
info->dev = &pdev->dev;
+
info->twl6040 = dev_get_drvdata(pdev->dev.parent);
- info->vibldrv_res = pdata->vibldrv_res;
- info->vibrdrv_res = pdata->vibrdrv_res;
- info->viblmotor_res = pdata->viblmotor_res;
- info->vibrmotor_res = pdata->vibrmotor_res;
+ if (pdata) {
+ info->vibldrv_res = pdata->vibldrv_res;
+ info->vibrdrv_res = pdata->vibrdrv_res;
+ info->viblmotor_res = pdata->viblmotor_res;
+ info->vibrmotor_res = pdata->vibrmotor_res;
+ vddvibl_uV = pdata->vddvibl_uV;
+ vddvibr_uV = pdata->vddvibr_uV;
+ } else {
+ of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
+ of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
+ of_property_read_u32(node, "viblmotor_res",
+ &info->viblmotor_res);
+ of_property_read_u32(node, "vibrmotor_res",
+ &info->vibrmotor_res);
+ of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
+ of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
+ }
+
if ((!info->vibldrv_res && !info->viblmotor_res) ||
(!info->vibrdrv_res && !info->vibrmotor_res)) {
dev_err(info->dev, "invalid vibra driver/motor resistance\n");
@@ -339,10 +358,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
goto err_regulator;
}
- if (pdata->vddvibl_uV) {
+ if (vddvibl_uV) {
ret = regulator_set_voltage(info->supplies[0].consumer,
- pdata->vddvibl_uV,
- pdata->vddvibl_uV);
+ vddvibl_uV, vddvibl_uV);
if (ret) {
dev_err(info->dev, "failed to set VDDVIBL volt %d\n",
ret);
@@ -350,10 +368,9 @@ static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
}
}
- if (pdata->vddvibr_uV) {
+ if (vddvibr_uV) {
ret = regulator_set_voltage(info->supplies[1].consumer,
- pdata->vddvibr_uV,
- pdata->vddvibr_uV);
+ vddvibr_uV, vddvibr_uV);
if (ret) {
dev_err(info->dev, "failed to set VDDVIBR volt %d\n",
ret);
@@ -401,6 +418,12 @@ static int __devexit twl6040_vibra_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id twl6040_vibra_of_match[] = {
+ {.compatible = "ti,twl6040-vibra", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
+
static struct platform_driver twl6040_vibra_driver = {
.probe = twl6040_vibra_probe,
.remove = __devexit_p(twl6040_vibra_remove),
@@ -408,6 +431,7 @@ static struct platform_driver twl6040_vibra_driver = {
.name = "twl6040-vibra",
.owner = THIS_MODULE,
.pm = &twl6040_vibra_pm_ops,
+ .of_match_table = twl6040_vibra_of_match,
},
};
module_platform_driver(twl6040_vibra_driver);
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 9b8db821d5f0..cd6268cf7cd5 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -339,4 +339,16 @@ config MOUSE_SYNAPTICS_USB
To compile this driver as a module, choose M here: the
module will be called synaptics_usb.
+config MOUSE_NAVPOINT_PXA27x
+ tristate "Synaptics NavPoint (PXA27x SSP/SPI)"
+ depends on PXA27x && PXA_SSP
+ help
+ This driver adds support for the Synaptics NavPoint touchpad connected
+ to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
+ a tap or tap-and-a-half drag gesture emulates the left mouse button.
+ For example, use the xf86-input-evdev driver for an X pointing device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called navpoint.
+
endif
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 4718effeb8d9..46ba7556fd4f 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
+obj-$(CONFIG_MOUSE_NAVPOINT_PXA27x) += navpoint.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 4c6a72d3d48c..4a1347e91bdc 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -553,10 +553,7 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
- input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
- input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
- input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
- input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+ input_mt_report_finger_count(dev, fingers);
input_report_key(dev, BTN_LEFT, left);
input_report_key(dev, BTN_RIGHT, right);
@@ -604,10 +601,54 @@ static void alps_process_packet_v3(struct psmouse *psmouse)
static void alps_process_packet_v4(struct psmouse *psmouse)
{
+ struct alps_data *priv = psmouse->private;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
+ int offset;
int x, y, z;
int left, right;
+ int x1, y1, x2, y2;
+ int fingers = 0;
+ unsigned int x_bitmap, y_bitmap;
+
+ /*
+ * v4 has a 6-byte encoding for bitmap data, but this data is
+ * broken up between 3 normal packets. Use priv->multi_packet to
+ * track our position in the bitmap packet.
+ */
+ if (packet[6] & 0x40) {
+ /* sync, reset position */
+ priv->multi_packet = 0;
+ }
+
+ if (WARN_ON_ONCE(priv->multi_packet > 2))
+ return;
+
+ offset = 2 * priv->multi_packet;
+ priv->multi_data[offset] = packet[6];
+ priv->multi_data[offset + 1] = packet[7];
+
+ if (++priv->multi_packet > 2) {
+ priv->multi_packet = 0;
+
+ x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) |
+ ((priv->multi_data[3] & 0x60) << 3) |
+ ((priv->multi_data[0] & 0x3f) << 2) |
+ ((priv->multi_data[1] & 0x60) >> 5);
+ y_bitmap = ((priv->multi_data[5] & 0x01) << 10) |
+ ((priv->multi_data[3] & 0x1f) << 5) |
+ (priv->multi_data[1] & 0x1f);
+
+ fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+ &x1, &y1, &x2, &y2);
+
+ /* Store MT data.*/
+ priv->fingers = fingers;
+ priv->x1 = x1;
+ priv->x2 = x2;
+ priv->y1 = y1;
+ priv->y2 = y2;
+ }
left = packet[4] & 0x01;
right = packet[4] & 0x02;
@@ -617,21 +658,41 @@ static void alps_process_packet_v4(struct psmouse *psmouse)
y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
z = packet[5] & 0x7f;
+ /*
+ * If there were no contacts in the bitmap, use ST
+ * points in MT reports.
+ * If there were two contacts or more, report MT data.
+ */
+ if (priv->fingers < 2) {
+ x1 = x;
+ y1 = y;
+ fingers = z > 0 ? 1 : 0;
+ } else {
+ fingers = priv->fingers;
+ x1 = priv->x1;
+ x2 = priv->x2;
+ y1 = priv->y1;
+ y2 = priv->y2;
+ }
+
if (z >= 64)
input_report_key(dev, BTN_TOUCH, 1);
else
input_report_key(dev, BTN_TOUCH, 0);
+ alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+ input_mt_report_finger_count(dev, fingers);
+
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+
if (z > 0) {
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
}
input_report_abs(dev, ABS_PRESSURE, z);
- input_report_key(dev, BTN_TOOL_FINGER, z > 0);
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
-
input_sync(dev);
}
@@ -1557,6 +1618,7 @@ int alps_init(struct psmouse *psmouse)
input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
break;
case ALPS_PROTO_V3:
+ case ALPS_PROTO_V4:
set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
input_mt_init_slots(dev1, 2);
input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
@@ -1565,8 +1627,7 @@ int alps_init(struct psmouse *psmouse)
set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
- /* fall through */
- case ALPS_PROTO_V4:
+
input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
break;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index a00a4ab92a0f..ae1ac354c778 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -39,6 +39,8 @@ struct alps_data {
int prev_fin; /* Finger bit from previous packet */
int multi_packet; /* Multi-packet data in progress */
unsigned char multi_data[6]; /* Saved multi-packet data */
+ int x1, x2, y1, y2; /* Coordinates from last MT report */
+ int fingers; /* Number of fingers from MT report */
u8 quirks;
struct timer_list timer;
};
diff --git a/drivers/input/mouse/navpoint.c b/drivers/input/mouse/navpoint.c
new file mode 100644
index 000000000000..c29ae7654d5e
--- /dev/null
+++ b/drivers/input/mouse/navpoint.c
@@ -0,0 +1,369 @@
+/*
+ * Synaptics NavPoint (PXA27x SSP/SPI) driver.
+ *
+ * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/navpoint.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/pxa2xx_ssp.h>
+#include <linux/slab.h>
+
+/*
+ * Synaptics Modular Embedded Protocol: Module Packet Format.
+ * Module header byte 2:0 = Length (# bytes that follow)
+ * Module header byte 4:3 = Control
+ * Module header byte 7:5 = Module Address
+ */
+#define HEADER_LENGTH(byte) ((byte) & 0x07)
+#define HEADER_CONTROL(byte) (((byte) >> 3) & 0x03)
+#define HEADER_ADDRESS(byte) ((byte) >> 5)
+
+struct navpoint {
+ struct ssp_device *ssp;
+ struct input_dev *input;
+ struct device *dev;
+ int gpio;
+ int index;
+ u8 data[1 + HEADER_LENGTH(0xff)];
+};
+
+/*
+ * Initialization values for SSCR0_x, SSCR1_x, SSSR_x.
+ */
+static const u32 sscr0 = 0
+ | SSCR0_TUM /* TIM = 1; No TUR interrupts */
+ | SSCR0_RIM /* RIM = 1; No ROR interrupts */
+ | SSCR0_SSE /* SSE = 1; SSP enabled */
+ | SSCR0_Motorola /* FRF = 0; Motorola SPI */
+ | SSCR0_DataSize(16) /* DSS = 15; Data size = 16-bit */
+ ;
+static const u32 sscr1 = 0
+ | SSCR1_SCFR /* SCFR = 1; SSPSCLK only during transfers */
+ | SSCR1_SCLKDIR /* SCLKDIR = 1; Slave mode */
+ | SSCR1_SFRMDIR /* SFRMDIR = 1; Slave mode */
+ | SSCR1_RWOT /* RWOT = 1; Receive without transmit mode */
+ | SSCR1_RxTresh(1) /* RFT = 0; Receive FIFO threshold = 1 */
+ | SSCR1_SPH /* SPH = 1; SSPSCLK inactive 0.5 + 1 cycles */
+ | SSCR1_RIE /* RIE = 1; Receive FIFO interrupt enabled */
+ ;
+static const u32 sssr = 0
+ | SSSR_BCE /* BCE = 1; Clear BCE */
+ | SSSR_TUR /* TUR = 1; Clear TUR */
+ | SSSR_EOC /* EOC = 1; Clear EOC */
+ | SSSR_TINT /* TINT = 1; Clear TINT */
+ | SSSR_PINT /* PINT = 1; Clear PINT */
+ | SSSR_ROR /* ROR = 1; Clear ROR */
+ ;
+
+/*
+ * MEP Query $22: Touchpad Coordinate Range Query is not supported by
+ * the NavPoint module, so sampled values provide the default limits.
+ */
+#define NAVPOINT_X_MIN 1278
+#define NAVPOINT_X_MAX 5340
+#define NAVPOINT_Y_MIN 1572
+#define NAVPOINT_Y_MAX 4396
+#define NAVPOINT_PRESSURE_MIN 0
+#define NAVPOINT_PRESSURE_MAX 255
+
+static void navpoint_packet(struct navpoint *navpoint)
+{
+ int finger;
+ int gesture;
+ int x, y, z;
+
+ switch (navpoint->data[0]) {
+ case 0xff: /* Garbage (packet?) between reset and Hello packet */
+ case 0x00: /* Module 0, NULL packet */
+ break;
+
+ case 0x0e: /* Module 0, Absolute packet */
+ finger = (navpoint->data[1] & 0x01);
+ gesture = (navpoint->data[1] & 0x02);
+ x = ((navpoint->data[2] & 0x1f) << 8) | navpoint->data[3];
+ y = ((navpoint->data[4] & 0x1f) << 8) | navpoint->data[5];
+ z = navpoint->data[6];
+ input_report_key(navpoint->input, BTN_TOUCH, finger);
+ input_report_abs(navpoint->input, ABS_X, x);
+ input_report_abs(navpoint->input, ABS_Y, y);
+ input_report_abs(navpoint->input, ABS_PRESSURE, z);
+ input_report_key(navpoint->input, BTN_TOOL_FINGER, finger);
+ input_report_key(navpoint->input, BTN_LEFT, gesture);
+ input_sync(navpoint->input);
+ break;
+
+ case 0x19: /* Module 0, Hello packet */
+ if ((navpoint->data[1] & 0xf0) == 0x10)
+ break;
+ /* FALLTHROUGH */
+ default:
+ dev_warn(navpoint->dev,
+ "spurious packet: data=0x%02x,0x%02x,...\n",
+ navpoint->data[0], navpoint->data[1]);
+ break;
+ }
+}
+
+static irqreturn_t navpoint_irq(int irq, void *dev_id)
+{
+ struct navpoint *navpoint = dev_id;
+ struct ssp_device *ssp = navpoint->ssp;
+ irqreturn_t ret = IRQ_NONE;
+ u32 status;
+
+ status = pxa_ssp_read_reg(ssp, SSSR);
+ if (status & sssr) {
+ dev_warn(navpoint->dev,
+ "unexpected interrupt: status=0x%08x\n", status);
+ pxa_ssp_write_reg(ssp, SSSR, (status & sssr));
+ ret = IRQ_HANDLED;
+ }
+
+ while (status & SSSR_RNE) {
+ u32 data;
+
+ data = pxa_ssp_read_reg(ssp, SSDR);
+ navpoint->data[navpoint->index + 0] = (data >> 8);
+ navpoint->data[navpoint->index + 1] = data;
+ navpoint->index += 2;
+ if (HEADER_LENGTH(navpoint->data[0]) < navpoint->index) {
+ navpoint_packet(navpoint);
+ navpoint->index = 0;
+ }
+ status = pxa_ssp_read_reg(ssp, SSSR);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+static void navpoint_up(struct navpoint *navpoint)
+{
+ struct ssp_device *ssp = navpoint->ssp;
+ int timeout;
+
+ clk_prepare_enable(ssp->clk);
+
+ pxa_ssp_write_reg(ssp, SSCR1, sscr1);
+ pxa_ssp_write_reg(ssp, SSSR, sssr);
+ pxa_ssp_write_reg(ssp, SSTO, 0);
+ pxa_ssp_write_reg(ssp, SSCR0, sscr0); /* SSCR0_SSE written last */
+
+ /* Wait until SSP port is ready for slave clock operations */
+ for (timeout = 100; timeout != 0; --timeout) {
+ if (!(pxa_ssp_read_reg(ssp, SSSR) & SSSR_CSS))
+ break;
+ msleep(1);
+ }
+
+ if (timeout == 0)
+ dev_err(navpoint->dev,
+ "timeout waiting for SSSR[CSS] to clear\n");
+
+ if (gpio_is_valid(navpoint->gpio))
+ gpio_set_value(navpoint->gpio, 1);
+}
+
+static void navpoint_down(struct navpoint *navpoint)
+{
+ struct ssp_device *ssp = navpoint->ssp;
+
+ if (gpio_is_valid(navpoint->gpio))
+ gpio_set_value(navpoint->gpio, 0);
+
+ pxa_ssp_write_reg(ssp, SSCR0, 0);
+
+ clk_disable_unprepare(ssp->clk);
+}
+
+static int navpoint_open(struct input_dev *input)
+{
+ struct navpoint *navpoint = input_get_drvdata(input);
+
+ navpoint_up(navpoint);
+
+ return 0;
+}
+
+static void navpoint_close(struct input_dev *input)
+{
+ struct navpoint *navpoint = input_get_drvdata(input);
+
+ navpoint_down(navpoint);
+}
+
+static int __devinit navpoint_probe(struct platform_device *pdev)
+{
+ const struct navpoint_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ struct ssp_device *ssp;
+ struct input_dev *input;
+ struct navpoint *navpoint;
+ int error;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -EINVAL;
+ }
+
+ if (gpio_is_valid(pdata->gpio)) {
+ error = gpio_request_one(pdata->gpio, GPIOF_OUT_INIT_LOW,
+ "SYNAPTICS_ON");
+ if (error)
+ return error;
+ }
+
+ ssp = pxa_ssp_request(pdata->port, pdev->name);
+ if (!ssp) {
+ error = -ENODEV;
+ goto err_free_gpio;
+ }
+
+ /* HaRET does not disable devices before jumping into Linux */
+ if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
+ pxa_ssp_write_reg(ssp, SSCR0, 0);
+ dev_warn(&pdev->dev, "ssp%d already enabled\n", pdata->port);
+ }
+
+ navpoint = kzalloc(sizeof(*navpoint), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!navpoint || !input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ navpoint->ssp = ssp;
+ navpoint->input = input;
+ navpoint->dev = &pdev->dev;
+ navpoint->gpio = pdata->gpio;
+
+ input->name = pdev->name;
+ input->dev.parent = &pdev->dev;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(EV_ABS, input->evbit);
+ __set_bit(BTN_LEFT, input->keybit);
+ __set_bit(BTN_TOUCH, input->keybit);
+ __set_bit(BTN_TOOL_FINGER, input->keybit);
+
+ input_set_abs_params(input, ABS_X,
+ NAVPOINT_X_MIN, NAVPOINT_X_MAX, 0, 0);
+ input_set_abs_params(input, ABS_Y,
+ NAVPOINT_Y_MIN, NAVPOINT_Y_MAX, 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE,
+ NAVPOINT_PRESSURE_MIN, NAVPOINT_PRESSURE_MAX,
+ 0, 0);
+
+ input->open = navpoint_open;
+ input->close = navpoint_close;
+
+ input_set_drvdata(input, navpoint);
+
+ error = request_irq(ssp->irq, navpoint_irq, 0, pdev->name, navpoint);
+ if (error)
+ goto err_free_mem;
+
+ error = input_register_device(input);
+ if (error)
+ goto err_free_irq;
+
+ platform_set_drvdata(pdev, navpoint);
+ dev_dbg(&pdev->dev, "ssp%d, irq %d\n", pdata->port, ssp->irq);
+
+ return 0;
+
+err_free_irq:
+ free_irq(ssp->irq, &pdev->dev);
+err_free_mem:
+ input_free_device(input);
+ kfree(navpoint);
+ pxa_ssp_free(ssp);
+err_free_gpio:
+ if (gpio_is_valid(pdata->gpio))
+ gpio_free(pdata->gpio);
+
+ return error;
+}
+
+static int __devexit navpoint_remove(struct platform_device *pdev)
+{
+ const struct navpoint_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ struct navpoint *navpoint = platform_get_drvdata(pdev);
+ struct ssp_device *ssp = navpoint->ssp;
+
+ free_irq(ssp->irq, navpoint);
+
+ input_unregister_device(navpoint->input);
+ kfree(navpoint);
+
+ pxa_ssp_free(ssp);
+
+ if (gpio_is_valid(pdata->gpio))
+ gpio_free(pdata->gpio);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int navpoint_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct navpoint *navpoint = platform_get_drvdata(pdev);
+ struct input_dev *input = navpoint->input;
+
+ mutex_lock(&input->mutex);
+ if (input->users)
+ navpoint_down(navpoint);
+ mutex_unlock(&input->mutex);
+
+ return 0;
+}
+
+static int navpoint_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct navpoint *navpoint = platform_get_drvdata(pdev);
+ struct input_dev *input = navpoint->input;
+
+ mutex_lock(&input->mutex);
+ if (input->users)
+ navpoint_up(navpoint);
+ mutex_unlock(&input->mutex);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(navpoint_pm_ops, navpoint_suspend, navpoint_resume);
+
+static struct platform_driver navpoint_driver = {
+ .probe = navpoint_probe,
+ .remove = __devexit_p(navpoint_remove),
+ .driver = {
+ .name = "navpoint",
+ .owner = THIS_MODULE,
+ .pm = &navpoint_pm_ops,
+ },
+};
+
+module_platform_driver(navpoint_driver);
+
+MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
+MODULE_DESCRIPTION("Synaptics NavPoint (PXA27x SSP/SPI) driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:navpoint");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 661a0ca3b3d6..3f5649f19082 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -41,7 +41,7 @@
#define GET_ABS_Y(packet) ((packet[2] << 2) | (packet[3] & 0x03))
/** Driver version. */
-static const char fsp_drv_ver[] = "1.0.0-K";
+static const char fsp_drv_ver[] = "1.1.0-K";
/*
* Make sure that the value being sent to FSP will not conflict with
@@ -303,6 +303,27 @@ static int fsp_get_revision(struct psmouse *psmouse, int *rev)
return 0;
}
+static int fsp_get_sn(struct psmouse *psmouse, int *sn)
+{
+ int v0, v1, v2;
+ int rc = -EIO;
+
+ /* production number since Cx is available at: 0x0b40 ~ 0x0b42 */
+ if (fsp_page_reg_write(psmouse, FSP_PAGE_0B))
+ goto out;
+ if (fsp_reg_read(psmouse, FSP_REG_SN0, &v0))
+ goto out;
+ if (fsp_reg_read(psmouse, FSP_REG_SN1, &v1))
+ goto out;
+ if (fsp_reg_read(psmouse, FSP_REG_SN2, &v2))
+ goto out;
+ *sn = (v0 << 16) | (v1 << 8) | v2;
+ rc = 0;
+out:
+ fsp_page_reg_write(psmouse, FSP_PAGE_DEFAULT);
+ return rc;
+}
+
static int fsp_get_buttons(struct psmouse *psmouse, int *btn)
{
static const int buttons[] = {
@@ -1000,16 +1021,21 @@ static int fsp_reconnect(struct psmouse *psmouse)
int fsp_init(struct psmouse *psmouse)
{
struct fsp_data *priv;
- int ver, rev;
+ int ver, rev, sn = 0;
int error;
if (fsp_get_version(psmouse, &ver) ||
fsp_get_revision(psmouse, &rev)) {
return -ENODEV;
}
+ if (ver >= FSP_VER_STL3888_C0) {
+ /* firmware information is only available since C0 */
+ fsp_get_sn(psmouse, &sn);
+ }
- psmouse_info(psmouse, "Finger Sensing Pad, hw: %d.%d.%d, sw: %s\n",
- ver >> 4, ver & 0x0F, rev, fsp_drv_ver);
+ psmouse_info(psmouse,
+ "Finger Sensing Pad, hw: %d.%d.%d, sn: %x, sw: %s\n",
+ ver >> 4, ver & 0x0F, rev, sn, fsp_drv_ver);
psmouse->private = priv = kzalloc(sizeof(struct fsp_data), GFP_KERNEL);
if (!priv)
diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h
index 334de19e5ddb..aa697ece405b 100644
--- a/drivers/input/mouse/sentelic.h
+++ b/drivers/input/mouse/sentelic.h
@@ -65,6 +65,14 @@
#define FSP_BIT_SWC1_GST_GRP1 BIT(6)
#define FSP_BIT_SWC1_BX_COMPAT BIT(7)
+#define FSP_PAGE_0B (0x0b)
+#define FSP_PAGE_82 (0x82)
+#define FSP_PAGE_DEFAULT FSP_PAGE_82
+
+#define FSP_REG_SN0 (0x40)
+#define FSP_REG_SN1 (0x41)
+#define FSP_REG_SN2 (0x42)
+
/* Finger-sensing Pad packet formating related definitions */
/* absolute packet type */
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index 17ff137b9bd5..d5928fd0c914 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -355,15 +355,4 @@ static struct serio_driver sermouse_drv = {
.disconnect = sermouse_disconnect,
};
-static int __init sermouse_init(void)
-{
- return serio_register_driver(&sermouse_drv);
-}
-
-static void __exit sermouse_exit(void)
-{
- serio_unregister_driver(&sermouse_drv);
-}
-
-module_init(sermouse_init);
-module_exit(sermouse_exit);
+module_serio_driver(sermouse_drv);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index a4b14a41cbf4..c703d53be3a0 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -45,16 +45,6 @@
#define YMIN_NOMINAL 1408
#define YMAX_NOMINAL 4448
-/*
- * Synaptics touchpads report the y coordinate from bottom to top, which is
- * opposite from what userspace expects.
- * This function is used to invert y before reporting.
- */
-static int synaptics_invert_y(int y)
-{
- return YMAX_NOMINAL + YMIN_NOMINAL - y;
-}
-
/*****************************************************************************
* Stuff we need even when we do not want native Synaptics support
@@ -112,6 +102,16 @@ void synaptics_reset(struct psmouse *psmouse)
****************************************************************************/
/*
+ * Synaptics touchpads report the y coordinate from bottom to top, which is
+ * opposite from what userspace expects.
+ * This function is used to invert y before reporting.
+ */
+static int synaptics_invert_y(int y)
+{
+ return YMAX_NOMINAL + YMIN_NOMINAL - y;
+}
+
+/*
* Send a command to the synpatics touchpad by special commands
*/
static int synaptics_send_cmd(struct psmouse *psmouse, unsigned char c, unsigned char *param)
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index eb9a3cfbeefa..e900d465aaf6 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -548,16 +548,4 @@ static struct serio_driver vsxxxaa_drv = {
.disconnect = vsxxxaa_disconnect,
};
-static int __init vsxxxaa_init(void)
-{
- return serio_register_driver(&vsxxxaa_drv);
-}
-
-static void __exit vsxxxaa_exit(void)
-{
- serio_unregister_driver(&vsxxxaa_drv);
-}
-
-module_init(vsxxxaa_init);
-module_exit(vsxxxaa_exit);
-
+module_serio_driver(vsxxxaa_drv);
diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c
deleted file mode 100644
index 061493d57682..000000000000
--- a/drivers/input/of_keymap.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Helpers for open firmware matrix keyboard bindings
- *
- * Copyright (C) 2012 Google, Inc
- *
- * Author:
- * Olof Johansson <olof@lixom.net>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/input.h>
-#include <linux/of.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/export.h>
-#include <linux/gfp.h>
-#include <linux/slab.h>
-
-struct matrix_keymap_data *
-matrix_keyboard_of_fill_keymap(struct device_node *np,
- const char *propname)
-{
- struct matrix_keymap_data *kd;
- u32 *keymap;
- int proplen, i;
- const __be32 *prop;
-
- if (!np)
- return NULL;
-
- if (!propname)
- propname = "linux,keymap";
-
- prop = of_get_property(np, propname, &proplen);
- if (!prop)
- return NULL;
-
- if (proplen % sizeof(u32)) {
- pr_warn("Malformed keymap property %s in %s\n",
- propname, np->full_name);
- return NULL;
- }
-
- kd = kzalloc(sizeof(*kd), GFP_KERNEL);
- if (!kd)
- return NULL;
-
- kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL);
- if (!kd->keymap) {
- kfree(kd);
- return NULL;
- }
-
- kd->keymap_size = proplen / sizeof(u32);
-
- for (i = 0; i < kd->keymap_size; i++) {
- u32 tmp = be32_to_cpup(prop + i);
- int key_code, row, col;
-
- row = (tmp >> 24) & 0xff;
- col = (tmp >> 16) & 0xff;
- key_code = tmp & 0xffff;
- keymap[i] = KEY(row, col, key_code);
- }
-
- return kd;
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap);
-
-void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd)
-{
- if (kd) {
- kfree(kd->keymap);
- kfree(kd);
- }
-}
-EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap);
diff --git a/drivers/input/serio/pcips2.c b/drivers/input/serio/pcips2.c
index 43494742541c..0c42497aaaf4 100644
--- a/drivers/input/serio/pcips2.c
+++ b/drivers/input/serio/pcips2.c
@@ -206,6 +206,7 @@ static const struct pci_device_id pcips2_ids[] = {
},
{ 0, }
};
+MODULE_DEVICE_TABLE(pci, pcips2_ids);
static struct pci_driver pcips2_driver = {
.name = "pcips2",
@@ -214,20 +215,8 @@ static struct pci_driver pcips2_driver = {
.remove = __devexit_p(pcips2_remove),
};
-static int __init pcips2_init(void)
-{
- return pci_register_driver(&pcips2_driver);
-}
-
-static void __exit pcips2_exit(void)
-{
- pci_unregister_driver(&pcips2_driver);
-}
-
-module_init(pcips2_init);
-module_exit(pcips2_exit);
+module_pci_driver(pcips2_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
MODULE_DESCRIPTION("PCI PS/2 keyboard/mouse driver");
-MODULE_DEVICE_TABLE(pci, pcips2_ids);
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 15aa81c9f1fb..a76fb64f03db 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -304,15 +304,4 @@ static struct serio_driver ps2mult_drv = {
.reconnect = ps2mult_reconnect,
};
-static int __init ps2mult_init(void)
-{
- return serio_register_driver(&ps2mult_drv);
-}
-
-static void __exit ps2mult_exit(void)
-{
- serio_unregister_driver(&ps2mult_drv);
-}
-
-module_init(ps2mult_init);
-module_exit(ps2mult_exit);
+module_serio_driver(ps2mult_drv);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 4494233d331a..59df2e7317a3 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -165,31 +165,38 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer,
struct serio_raw *serio_raw = client->serio_raw;
char uninitialized_var(c);
ssize_t read = 0;
- int retval;
+ int error;
- if (serio_raw->dead)
- return -ENODEV;
+ for (;;) {
+ if (serio_raw->dead)
+ return -ENODEV;
- if (serio_raw->head == serio_raw->tail && (file->f_flags & O_NONBLOCK))
- return -EAGAIN;
+ if (serio_raw->head == serio_raw->tail &&
+ (file->f_flags & O_NONBLOCK))
+ return -EAGAIN;
- retval = wait_event_interruptible(serio_raw->wait,
- serio_raw->head != serio_raw->tail || serio_raw->dead);
- if (retval)
- return retval;
+ if (count == 0)
+ break;
- if (serio_raw->dead)
- return -ENODEV;
+ while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
+ if (put_user(c, buffer++))
+ return -EFAULT;
+ read++;
+ }
- while (read < count && serio_raw_fetch_byte(serio_raw, &c)) {
- if (put_user(c, buffer++)) {
- retval = -EFAULT;
+ if (read)
break;
+
+ if (!(file->f_flags & O_NONBLOCK)) {
+ error = wait_event_interruptible(serio_raw->wait,
+ serio_raw->head != serio_raw->tail ||
+ serio_raw->dead);
+ if (error)
+ return error;
}
- read++;
}
- return read ?: retval;
+ return read;
}
static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
@@ -197,8 +204,7 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
{
struct serio_raw_client *client = file->private_data;
struct serio_raw *serio_raw = client->serio_raw;
- ssize_t written = 0;
- int retval;
+ int retval = 0;
unsigned char c;
retval = mutex_lock_interruptible(&serio_raw_mutex);
@@ -218,16 +224,20 @@ static ssize_t serio_raw_write(struct file *file, const char __user *buffer,
retval = -EFAULT;
goto out;
}
+
if (serio_write(serio_raw->serio, c)) {
- retval = -EIO;
+ /* Either signal error or partial write */
+ if (retval == 0)
+ retval = -EIO;
goto out;
}
- written++;
+
+ retval++;
}
out:
mutex_unlock(&serio_raw_mutex);
- return written ?: retval;
+ return retval;
}
static unsigned int serio_raw_poll(struct file *file, poll_table *wait)
@@ -432,15 +442,4 @@ static struct serio_driver serio_raw_drv = {
.manual_bind = true,
};
-static int __init serio_raw_init(void)
-{
- return serio_register_driver(&serio_raw_drv);
-}
-
-static void __exit serio_raw_exit(void)
-{
- serio_unregister_driver(&serio_raw_drv);
-}
-
-module_init(serio_raw_init);
-module_exit(serio_raw_exit);
+module_serio_driver(serio_raw_drv);
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index d96d4c2a76a9..1e983bec7d86 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -73,7 +73,8 @@ struct xps2data {
spinlock_t lock;
void __iomem *base_address; /* virt. address of control registers */
unsigned int flags;
- struct serio serio; /* serio */
+ struct serio *serio; /* serio */
+ struct device *dev;
};
/************************************/
@@ -119,7 +120,7 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
/* Check which interrupt is active */
if (intr_sr & XPS2_IPIXR_RX_OVF)
- dev_warn(drvdata->serio.dev.parent, "receive overrun error\n");
+ dev_warn(drvdata->dev, "receive overrun error\n");
if (intr_sr & XPS2_IPIXR_RX_ERR)
drvdata->flags |= SERIO_PARITY;
@@ -132,10 +133,10 @@ static irqreturn_t xps2_interrupt(int irq, void *dev_id)
/* Error, if a byte is not received */
if (status) {
- dev_err(drvdata->serio.dev.parent,
+ dev_err(drvdata->dev,
"wrong rcvd byte count (%d)\n", status);
} else {
- serio_interrupt(&drvdata->serio, c, drvdata->flags);
+ serio_interrupt(drvdata->serio, c, drvdata->flags);
drvdata->flags = 0;
}
}
@@ -193,7 +194,7 @@ static int sxps2_open(struct serio *pserio)
error = request_irq(drvdata->irq, &xps2_interrupt, 0,
DRIVER_NAME, drvdata);
if (error) {
- dev_err(drvdata->serio.dev.parent,
+ dev_err(drvdata->dev,
"Couldn't allocate interrupt %d\n", drvdata->irq);
return error;
}
@@ -259,15 +260,16 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
}
drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
- if (!drvdata) {
- dev_err(dev, "Couldn't allocate device private record\n");
- return -ENOMEM;
+ serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+ if (!drvdata || !serio) {
+ error = -ENOMEM;
+ goto failed1;
}
- dev_set_drvdata(dev, drvdata);
-
spin_lock_init(&drvdata->lock);
drvdata->irq = r_irq.start;
+ drvdata->serio = serio;
+ drvdata->dev = dev;
phys_addr = r_mem.start;
remap_size = resource_size(&r_mem);
@@ -298,7 +300,6 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
(unsigned long long)phys_addr, drvdata->base_address,
drvdata->irq);
- serio = &drvdata->serio;
serio->id.type = SERIO_8042;
serio->write = sxps2_write;
serio->open = sxps2_open;
@@ -312,13 +313,14 @@ static int __devinit xps2_of_probe(struct platform_device *ofdev)
serio_register_port(serio);
+ platform_set_drvdata(ofdev, drvdata);
return 0; /* success */
failed2:
release_mem_region(phys_addr, remap_size);
failed1:
+ kfree(serio);
kfree(drvdata);
- dev_set_drvdata(dev, NULL);
return error;
}
@@ -333,22 +335,21 @@ failed1:
*/
static int __devexit xps2_of_remove(struct platform_device *of_dev)
{
- struct device *dev = &of_dev->dev;
- struct xps2data *drvdata = dev_get_drvdata(dev);
+ struct xps2data *drvdata = platform_get_drvdata(of_dev);
struct resource r_mem; /* IO mem resources */
- serio_unregister_port(&drvdata->serio);
+ serio_unregister_port(drvdata->serio);
iounmap(drvdata->base_address);
/* Get iospace of the device */
if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
- dev_err(dev, "invalid address\n");
+ dev_err(drvdata->dev, "invalid address\n");
else
release_mem_region(r_mem.start, resource_size(&r_mem));
kfree(drvdata);
- dev_set_drvdata(dev, NULL);
+ platform_set_drvdata(of_dev, NULL);
return 0;
}
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 755a39e4c9e9..ee83c3904ee8 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1862,7 +1862,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (i == ARRAY_SIZE(speeds)) {
dev_info(&intf->dev,
"Aiptek tried all speeds, no sane response\n");
- goto fail2;
+ goto fail3;
}
/* Associate this driver's struct with the usb interface.
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index b4842d0e61dd..b79d45198d82 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -135,6 +135,6 @@ extern const struct usb_device_id wacom_ids[];
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
void wacom_setup_device_quirks(struct wacom_features *features);
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
- struct wacom_wac *wacom_wac);
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+ struct wacom_wac *wacom_wac);
#endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 79a0509882d4..cad5602d3ce4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -28,6 +28,7 @@
#define HID_USAGE_Y_TILT 0x3e
#define HID_USAGE_FINGER 0x22
#define HID_USAGE_STYLUS 0x20
+#define HID_USAGE_CONTACTMAX 0x55
#define HID_COLLECTION 0xa1
#define HID_COLLECTION_LOGICAL 0x02
#define HID_COLLECTION_END 0xc0
@@ -204,6 +205,27 @@ static int wacom_parse_logical_collection(unsigned char *report,
return length;
}
+static void wacom_retrieve_report_data(struct usb_interface *intf,
+ struct wacom_features *features)
+{
+ int result = 0;
+ unsigned char *rep_data;
+
+ rep_data = kmalloc(2, GFP_KERNEL);
+ if (rep_data) {
+
+ rep_data[0] = 12;
+ result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
+ rep_data[0], &rep_data, 2,
+ WAC_MSG_RETRIES);
+
+ if (result >= 0 && rep_data[1] > 2)
+ features->touch_max = rep_data[1];
+
+ kfree(rep_data);
+ }
+}
+
/*
* Interface Descriptor of wacom devices can be incomplete and
* inconsistent so wacom_features table is used to store stylus
@@ -236,6 +258,9 @@ static int wacom_parse_logical_collection(unsigned char *report,
* 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
* Collection. Instead they define a Logical Collection with a single
* Logical Maximum for both X and Y.
+ *
+ * Intuos5 touch interface does not contain useful data. We deal with
+ * this after returning from this function.
*/
static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc,
@@ -295,6 +320,10 @@ static int wacom_parse_hid(struct usb_interface *intf,
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
}
+
+ if (features->type == MTSCREEN)
+ features->pktlen = WACOM_PKGLEN_MTOUCH;
+
if (features->type == BAMBOO_PT) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
@@ -327,18 +356,15 @@ static int wacom_parse_hid(struct usb_interface *intf,
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
- features->device_type = BTN_TOOL_FINGER;
- if (features->type == TABLETPC2FG) {
- /* need to reset back */
- features->pktlen = WACOM_PKGLEN_TPC2FG;
+ int type = features->type;
+
+ if (type == TABLETPC2FG || type == MTSCREEN) {
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
- } else if (features->type == BAMBOO_PT) {
- /* need to reset back */
- features->pktlen = WACOM_PKGLEN_BBTOUCH;
+ } else if (type == BAMBOO_PT) {
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
@@ -352,10 +378,6 @@ static int wacom_parse_hid(struct usb_interface *intf,
i += 4;
}
} else if (pen) {
- /* penabled only accepts exact bytes of data */
- if (features->type == TABLETPC2FG)
- features->pktlen = WACOM_PKGLEN_GRAPHIRE;
- features->device_type = BTN_TOOL_PEN;
features->y_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
@@ -377,6 +399,11 @@ static int wacom_parse_hid(struct usb_interface *intf,
pen = 1;
i++;
break;
+
+ case HID_USAGE_CONTACTMAX:
+ wacom_retrieve_report_data(intf, features);
+ i++;
+ break;
}
break;
@@ -413,22 +440,29 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
if (!rep_data)
return error;
- /* ask to report tablet data if it is MT Tablet PC or
- * not a Tablet PC */
- if (features->type == TABLETPC2FG) {
- do {
- rep_data[0] = 3;
- rep_data[1] = 4;
- rep_data[2] = 0;
- rep_data[3] = 0;
- report_id = 3;
- error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
- report_id, rep_data, 4, 1);
- if (error >= 0)
- error = wacom_get_report(intf,
- WAC_HID_FEATURE_REPORT,
- report_id, rep_data, 4, 1);
- } while ((error < 0 || rep_data[1] != 4) && limit++ < WAC_MSG_RETRIES);
+ /* ask to report Wacom data */
+ if (features->device_type == BTN_TOOL_FINGER) {
+ /* if it is an MT Tablet PC touch */
+ if (features->type == TABLETPC2FG ||
+ features->type == MTSCREEN) {
+ do {
+ rep_data[0] = 3;
+ rep_data[1] = 4;
+ rep_data[2] = 0;
+ rep_data[3] = 0;
+ report_id = 3;
+ error = wacom_set_report(intf,
+ WAC_HID_FEATURE_REPORT,
+ report_id,
+ rep_data, 4, 1);
+ if (error >= 0)
+ error = wacom_get_report(intf,
+ WAC_HID_FEATURE_REPORT,
+ report_id,
+ rep_data, 4, 1);
+ } while ((error < 0 || rep_data[1] != 4) &&
+ limit++ < WAC_MSG_RETRIES);
+ }
} else if (features->type != TABLETPC &&
features->type != WIRELESS &&
features->device_type == BTN_TOOL_PEN) {
@@ -450,7 +484,7 @@ static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_feat
}
static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
- struct wacom_features *features)
+ struct wacom_features *features)
{
int error = 0;
struct usb_host_interface *interface = intf->cur_altsetting;
@@ -478,16 +512,21 @@ static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
}
}
- /* only Tablet PCs and Bamboo P&T need to retrieve the info */
- if ((features->type != TABLETPC) && (features->type != TABLETPC2FG) &&
- (features->type != BAMBOO_PT))
+ /* only devices that support touch need to retrieve the info */
+ if (features->type != TABLETPC &&
+ features->type != TABLETPC2FG &&
+ features->type != BAMBOO_PT &&
+ features->type != MTSCREEN) {
goto out;
+ }
- if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
- if (usb_get_extra_descriptor(&interface->endpoint[0],
- HID_DEVICET_REPORT, &hid_desc)) {
- printk("wacom: can not retrieve extra class descriptor\n");
- error = 1;
+ error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc);
+ if (error) {
+ error = usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc);
+ if (error) {
+ dev_err(&intf->dev,
+ "can not retrieve extra class descriptor\n");
goto out;
}
}
@@ -577,23 +616,39 @@ static void wacom_remove_shared_data(struct wacom_wac *wacom)
static int wacom_led_control(struct wacom *wacom)
{
unsigned char *buf;
- int retval, led = 0;
+ int retval;
buf = kzalloc(9, GFP_KERNEL);
if (!buf)
return -ENOMEM;
- if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
- wacom->wacom_wac.features.type == WACOM_24HD)
- led = (wacom->led.select[1] << 4) | 0x40;
-
- led |= wacom->led.select[0] | 0x4;
-
- buf[0] = WAC_CMD_LED_CONTROL;
- buf[1] = led;
- buf[2] = wacom->led.llv;
- buf[3] = wacom->led.hlv;
- buf[4] = wacom->led.img_lum;
+ if (wacom->wacom_wac.features.type >= INTUOS5S &&
+ wacom->wacom_wac.features.type <= INTUOS5L) {
+ /*
+ * Touch Ring and crop mark LED luminance may take on
+ * one of four values:
+ * 0 = Low; 1 = Medium; 2 = High; 3 = Off
+ */
+ int ring_led = wacom->led.select[0] & 0x03;
+ int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
+ int crop_lum = 0;
+
+ buf[0] = WAC_CMD_LED_CONTROL;
+ buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
+ }
+ else {
+ int led = wacom->led.select[0] | 0x4;
+
+ if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
+ wacom->wacom_wac.features.type == WACOM_24HD)
+ led |= (wacom->led.select[1] << 4) | 0x40;
+
+ buf[0] = WAC_CMD_LED_CONTROL;
+ buf[1] = led;
+ buf[2] = wacom->led.llv;
+ buf[3] = wacom->led.hlv;
+ buf[4] = wacom->led.img_lum;
+ }
retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
buf, 9, WAC_CMD_RETRIES);
@@ -786,6 +841,17 @@ static struct attribute_group intuos4_led_attr_group = {
.attrs = intuos4_led_attrs,
};
+static struct attribute *intuos5_led_attrs[] = {
+ &dev_attr_status0_luminance.attr,
+ &dev_attr_status_led0_select.attr,
+ NULL
+};
+
+static struct attribute_group intuos5_led_attr_group = {
+ .name = "wacom_led",
+ .attrs = intuos5_led_attrs,
+};
+
static int wacom_initialize_leds(struct wacom *wacom)
{
int error;
@@ -815,6 +881,19 @@ static int wacom_initialize_leds(struct wacom *wacom)
&cintiq_led_attr_group);
break;
+ case INTUOS5S:
+ case INTUOS5:
+ case INTUOS5L:
+ wacom->led.select[0] = 0;
+ wacom->led.select[1] = 0;
+ wacom->led.llv = 32;
+ wacom->led.hlv = 0;
+ wacom->led.img_lum = 0;
+
+ error = sysfs_create_group(&wacom->intf->dev.kobj,
+ &intuos5_led_attr_group);
+ break;
+
default:
return 0;
}
@@ -843,6 +922,13 @@ static void wacom_destroy_leds(struct wacom *wacom)
sysfs_remove_group(&wacom->intf->dev.kobj,
&cintiq_led_attr_group);
break;
+
+ case INTUOS5S:
+ case INTUOS5:
+ case INTUOS5L:
+ sysfs_remove_group(&wacom->intf->dev.kobj,
+ &intuos5_led_attr_group);
+ break;
}
}
@@ -904,8 +990,10 @@ static int wacom_register_input(struct wacom *wacom)
int error;
input_dev = input_allocate_device();
- if (!input_dev)
- return -ENOMEM;
+ if (!input_dev) {
+ error = -ENOMEM;
+ goto fail1;
+ }
input_dev->name = wacom_wac->name;
input_dev->dev.parent = &intf->dev;
@@ -915,14 +1003,20 @@ static int wacom_register_input(struct wacom *wacom)
input_set_drvdata(input_dev, wacom);
wacom_wac->input = input_dev;
- wacom_setup_input_capabilities(input_dev, wacom_wac);
+ error = wacom_setup_input_capabilities(input_dev, wacom_wac);
+ if (error)
+ goto fail1;
error = input_register_device(input_dev);
- if (error) {
- input_free_device(input_dev);
- wacom_wac->input = NULL;
- }
+ if (error)
+ goto fail2;
+ return 0;
+
+fail2:
+ input_free_device(input_dev);
+ wacom_wac->input = NULL;
+fail1:
return error;
}
@@ -941,22 +1035,22 @@ static void wacom_wireless_work(struct work_struct *work)
wacom = usb_get_intfdata(usbdev->config->interface[1]);
if (wacom->wacom_wac.input)
input_unregister_device(wacom->wacom_wac.input);
- wacom->wacom_wac.input = 0;
+ wacom->wacom_wac.input = NULL;
/* Touch interface */
wacom = usb_get_intfdata(usbdev->config->interface[2]);
if (wacom->wacom_wac.input)
input_unregister_device(wacom->wacom_wac.input);
- wacom->wacom_wac.input = 0;
+ wacom->wacom_wac.input = NULL;
if (wacom_wac->pid == 0) {
- printk(KERN_INFO "wacom: wireless tablet disconnected\n");
+ dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
} else {
const struct usb_device_id *id = wacom_ids;
- printk(KERN_INFO
- "wacom: wireless tablet connected with PID %x\n",
- wacom_wac->pid);
+ dev_info(&wacom->intf->dev,
+ "wireless tablet connected with PID %x\n",
+ wacom_wac->pid);
while (id->match_flags) {
if (id->idVendor == USB_VENDOR_ID_WACOM &&
@@ -966,8 +1060,8 @@ static void wacom_wireless_work(struct work_struct *work)
}
if (!id->match_flags) {
- printk(KERN_INFO
- "wacom: ignorning unknown PID.\n");
+ dev_info(&wacom->intf->dev,
+ "ignoring unknown PID.\n");
return;
}
@@ -1038,11 +1132,33 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
endpoint = &intf->cur_altsetting->endpoint[0].desc;
- /* Retrieve the physical and logical size for OEM devices */
+ /* Retrieve the physical and logical size for touch devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
goto fail3;
+ /*
+ * Intuos5 has no useful data about its touch interface in its
+ * HID descriptor. If this is the touch interface (wMaxPacketSize
+ * of WACOM_PKGLEN_BBTOUCH3), override the table values.
+ */
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+ if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
+ features->device_type = BTN_TOOL_FINGER;
+ features->pktlen = WACOM_PKGLEN_BBTOUCH3;
+
+ features->x_phy =
+ (features->x_max * 100) / features->x_resolution;
+ features->y_phy =
+ (features->y_max * 100) / features->y_resolution;
+
+ features->x_max = 4096;
+ features->y_max = 4096;
+ } else {
+ features->device_type = BTN_TOOL_PEN;
+ }
+ }
+
wacom_setup_device_quirks(features);
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b327790e9a0c..004bc1bb1544 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -61,7 +61,8 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom)
break;
default:
- printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+ dev_dbg(input->dev.parent,
+ "%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
@@ -76,8 +77,8 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
int prox, pressure;
if (data[0] != WACOM_REPORT_PENABLED) {
- dev_dbg(&input->dev,
- "wacom_pl_irq: received unknown report #%d\n", data[0]);
+ dev_dbg(input->dev.parent,
+ "%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
@@ -147,7 +148,8 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->input;
if (data[0] != WACOM_REPORT_PENABLED) {
- printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+ dev_dbg(input->dev.parent,
+ "%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
@@ -176,7 +178,8 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->input;
int prox = data[1] & 0x20, pressure;
- dev_dbg(&input->dev, "wacom_dtu_irq: received report #%d\n", data[0]);
+ dev_dbg(input->dev.parent,
+ "%s: received report #%d", __func__, data[0]);
if (prox) {
/* Going into proximity select tool */
@@ -212,9 +215,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
int retval = 0;
if (data[0] != WACOM_REPORT_PENABLED) {
- dev_dbg(&input->dev,
- "wacom_graphire_irq: received unknown report #%d\n",
- data[0]);
+ dev_dbg(input->dev.parent,
+ "%s: received unknown report #%d\n", __func__, data[0]);
goto exit;
}
@@ -324,6 +326,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ wacom->shared->stylus_in_proximity = true;
+
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
@@ -409,6 +414,9 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
+ if (features->type >= INTUOS5S && features->type <= INTUOS5L)
+ wacom->shared->stylus_in_proximity = false;
+
/*
* Reset all states otherwise we lose the initial states
* when in-prox next time
@@ -455,6 +463,7 @@ static void wacom_intuos_general(struct wacom_wac *wacom)
if ((data[1] & 0xb8) == 0xa0) {
t = (data[6] << 2) | ((data[7] >> 6) & 3);
if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+ (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
features->type == WACOM_21UX2 || features->type == WACOM_24HD) {
t = (t << 1) | (data[1] & 1);
}
@@ -485,11 +494,13 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
unsigned int t;
int idx = 0, result;
- if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD
- && data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD) {
- dev_dbg(&input->dev,
- "wacom_intuos_irq: received unknown report #%d\n",
- data[0]);
+ if (data[0] != WACOM_REPORT_PENABLED &&
+ data[0] != WACOM_REPORT_INTUOSREAD &&
+ data[0] != WACOM_REPORT_INTUOSWRITE &&
+ data[0] != WACOM_REPORT_INTUOSPAD &&
+ data[0] != WACOM_REPORT_INTUOS5PAD) {
+ dev_dbg(input->dev.parent,
+ "%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
@@ -498,7 +509,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
idx = data[1] & 0x01;
/* pad packets. Works as a second tool and is always in prox */
- if (data[0] == WACOM_REPORT_INTUOSPAD) {
+ if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD) {
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
input_report_key(input, BTN_0, (data[2] & 0x01));
input_report_key(input, BTN_1, (data[3] & 0x01));
@@ -574,6 +585,34 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
input_report_key(input, wacom->tool[1], 0);
input_report_abs(input, ABS_MISC, 0);
}
+ } else if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
+ int i;
+
+ /* Touch ring mode switch has no capacitive sensor */
+ input_report_key(input, BTN_0, (data[3] & 0x01));
+
+ /*
+ * ExpressKeys on Intuos5 have a capacitive sensor in
+ * addition to the mechanical switch. Switch data is
+ * stored in data[4], capacitive data in data[5].
+ */
+ for (i = 0; i < 8; i++)
+ input_report_key(input, BTN_1 + i, data[4] & (1 << i));
+
+ if (data[2] & 0x80) {
+ input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f));
+ } else {
+ /* Out of proximity, clear wheel value. */
+ input_report_abs(input, ABS_WHEEL, 0);
+ }
+
+ if (data[2] | (data[3] & 0x01) | data[4]) {
+ input_report_key(input, wacom->tool[1], 1);
+ input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
+ } else {
+ input_report_key(input, wacom->tool[1], 0);
+ input_report_abs(input, ABS_MISC, 0);
+ }
} else {
if (features->type == WACOM_21UX2) {
input_report_key(input, BTN_0, (data[5] & 0x01));
@@ -637,7 +676,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
(features->type == INTUOS3 ||
features->type == INTUOS3S ||
features->type == INTUOS4 ||
- features->type == INTUOS4S)) {
+ features->type == INTUOS4S ||
+ features->type == INTUOS5 ||
+ features->type == INTUOS5S)) {
return 0;
}
@@ -690,7 +731,8 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* I4 mouse */
- if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
+ if ((features->type >= INTUOS4S && features->type <= INTUOS4L) ||
+ (features->type >= INTUOS5S && features->type <= INTUOS5L)) {
input_report_key(input, BTN_LEFT, data[6] & 0x01);
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
@@ -717,7 +759,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
}
}
} else if ((features->type < INTUOS3S || features->type == INTUOS3L ||
- features->type == INTUOS4L) &&
+ features->type == INTUOS4L || features->type == INTUOS5L) &&
wacom->tool[idx] == BTN_TOOL_LENS) {
/* Lens cursor packets */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
@@ -734,6 +776,72 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
return 1;
}
+static int find_slot_from_contactid(struct wacom_wac *wacom, int contactid)
+{
+ int touch_max = wacom->features.touch_max;
+ int i;
+
+ if (!wacom->slots)
+ return -1;
+
+ for (i = 0; i < touch_max; ++i) {
+ if (wacom->slots[i] == contactid)
+ return i;
+ }
+ for (i = 0; i < touch_max; ++i) {
+ if (wacom->slots[i] == -1)
+ return i;
+ }
+ return -1;
+}
+
+static int wacom_mt_touch(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ char *data = wacom->data;
+ int i;
+ int current_num_contacts = data[2];
+ int contacts_to_send = 0;
+
+ /*
+ * First packet resets the counter since only the first
+ * packet in series will have non-zero current_num_contacts.
+ */
+ if (current_num_contacts)
+ wacom->num_contacts_left = current_num_contacts;
+
+ /* There are at most 5 contacts per packet */
+ contacts_to_send = min(5, wacom->num_contacts_left);
+
+ for (i = 0; i < contacts_to_send; i++) {
+ int offset = (WACOM_BYTES_PER_MT_PACKET * i) + 3;
+ bool touch = data[offset] & 0x1;
+ int id = le16_to_cpup((__le16 *)&data[offset + 1]);
+ int slot = find_slot_from_contactid(wacom, id);
+
+ if (slot < 0)
+ continue;
+
+ input_mt_slot(input, slot);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+ if (touch) {
+ int x = le16_to_cpup((__le16 *)&data[offset + 7]);
+ int y = le16_to_cpup((__le16 *)&data[offset + 9]);
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ }
+ wacom->slots[slot] = touch ? id : -1;
+ }
+
+ input_mt_report_pointer_emulation(input, true);
+
+ wacom->num_contacts_left -= contacts_to_send;
+ if (wacom->num_contacts_left < 0)
+ wacom->num_contacts_left = 0;
+
+ return 1;
+}
+
static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->input;
@@ -772,6 +880,9 @@ static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
bool prox;
int x = 0, y = 0;
+ if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
+ return 0;
+
if (!wacom->shared->stylus_in_proximity) {
if (len == WACOM_PKGLEN_TPC1FG) {
prox = data[0] & 0x01;
@@ -835,15 +946,15 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
{
char *data = wacom->data;
- dev_dbg(&wacom->input->dev, "wacom_tpc_irq: received report #%d\n",
- data[0]);
+ dev_dbg(wacom->input->dev.parent,
+ "%s: received report #%d\n", __func__, data[0]);
switch (len) {
case WACOM_PKGLEN_TPC1FG:
- return wacom_tpc_single_touch(wacom, len);
+ return wacom_tpc_single_touch(wacom, len);
case WACOM_PKGLEN_TPC2FG:
- return wacom_tpc_mt_touch(wacom);
+ return wacom_tpc_mt_touch(wacom);
default:
switch (data[0]) {
@@ -852,6 +963,9 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
case WACOM_REPORT_TPCST:
return wacom_tpc_single_touch(wacom, len);
+ case WACOM_REPORT_TPCMT:
+ return wacom_mt_touch(wacom);
+
case WACOM_REPORT_PENABLED:
return wacom_tpc_pen(wacom);
}
@@ -1120,8 +1234,18 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
sync = wacom_intuos_irq(wacom_wac);
break;
+ case INTUOS5S:
+ case INTUOS5:
+ case INTUOS5L:
+ if (len == WACOM_PKGLEN_BBTOUCH3)
+ sync = wacom_bpt3_touch(wacom_wac);
+ else
+ sync = wacom_intuos_irq(wacom_wac);
+ break;
+
case TABLETPC:
case TABLETPC2FG:
+ case MTSCREEN:
sync = wacom_tpc_irq(wacom_wac, len);
break;
@@ -1194,7 +1318,9 @@ void wacom_setup_device_quirks(struct wacom_features *features)
/* these device have multiple inputs */
if (features->type == TABLETPC || features->type == TABLETPC2FG ||
- features->type == BAMBOO_PT || features->type == WIRELESS)
+ features->type == BAMBOO_PT || features->type == WIRELESS ||
+ (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
+ features->type == MTSCREEN)
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
/* quirk for bamboo touch with 2 low res touches */
@@ -1225,8 +1351,8 @@ static unsigned int wacom_calculate_touch_res(unsigned int logical_max,
return (logical_max * 100) / physical_max;
}
-void wacom_setup_input_capabilities(struct input_dev *input_dev,
- struct wacom_wac *wacom_wac)
+int wacom_setup_input_capabilities(struct input_dev *input_dev,
+ struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
int i;
@@ -1361,6 +1487,50 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
wacom_setup_intuos(wacom_wac);
break;
+ case INTUOS5:
+ case INTUOS5L:
+ if (features->device_type == BTN_TOOL_PEN) {
+ __set_bit(BTN_7, input_dev->keybit);
+ __set_bit(BTN_8, input_dev->keybit);
+ }
+ /* fall through */
+
+ case INTUOS5S:
+ __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
+ if (features->device_type == BTN_TOOL_PEN) {
+ for (i = 0; i < 7; i++)
+ __set_bit(BTN_0 + i, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_DISTANCE, 0,
+ features->distance_max,
+ 0, 0);
+
+ input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+ wacom_setup_intuos(wacom_wac);
+ } else if (features->device_type == BTN_TOOL_FINGER) {
+ __clear_bit(ABS_MISC, input_dev->absbit);
+
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+
+ input_mt_init_slots(input_dev, features->touch_max);
+
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, 255, 0, 0);
+
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, features->x_max,
+ features->x_fuzz, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, features->y_max,
+ features->y_fuzz, 0);
+ }
+ break;
+
case INTUOS4:
case INTUOS4L:
__set_bit(BTN_7, input_dev->keybit);
@@ -1378,9 +1548,19 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
break;
case TABLETPC2FG:
+ case MTSCREEN:
if (features->device_type == BTN_TOOL_FINGER) {
- input_mt_init_slots(input_dev, 2);
+ wacom_wac->slots = kmalloc(features->touch_max *
+ sizeof(int),
+ GFP_KERNEL);
+ if (!wacom_wac->slots)
+ return -ENOMEM;
+
+ for (i = 0; i < features->touch_max; i++)
+ wacom_wac->slots[i] = -1;
+
+ input_mt_init_slots(input_dev, features->touch_max);
input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
0, MT_TOOL_MAX, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1435,6 +1615,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ input_mt_init_slots(input_dev, features->touch_max);
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
__set_bit(BTN_TOOL_TRIPLETAP,
@@ -1442,13 +1623,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
__set_bit(BTN_TOOL_QUADTAP,
input_dev->keybit);
- input_mt_init_slots(input_dev, 16);
-
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
0, 255, 0, 0);
- } else {
- input_mt_init_slots(input_dev, 2);
}
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1468,6 +1645,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
}
break;
}
+ return 0;
}
static const struct wacom_features wacom_features_0x00 =
@@ -1635,6 +1813,24 @@ static const struct wacom_features wacom_features_0xBB =
static const struct wacom_features wacom_features_0xBC =
{ "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047,
63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x26 =
+ { "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047,
+ 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
+static const struct wacom_features wacom_features_0x27 =
+ { "Wacom Intuos5 touch M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
+ 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
+static const struct wacom_features wacom_features_0x28 =
+ { "Wacom Intuos5 touch L", WACOM_PKGLEN_INTUOS, 65024, 40640, 2047,
+ 63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES,
+ .touch_max = 16 };
+static const struct wacom_features wacom_features_0x29 =
+ { "Wacom Intuos5 S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047,
+ 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0x2A =
+ { "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS, 44704, 27940, 2047,
+ 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xF4 =
{ "Wacom Cintiq 24HD", WACOM_PKGLEN_INTUOS, 104480, 65600, 2047,
63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
@@ -1676,13 +1872,19 @@ static const struct wacom_features wacom_features_0x9F =
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE2 =
{ "Wacom ISDv4 E2", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255,
- 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xE3 =
{ "Wacom ISDv4 E3", WACOM_PKGLEN_TPC2FG, 26202, 16325, 255,
- 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
+static const struct wacom_features wacom_features_0xE5 =
+ { "Wacom ISDv4 E5", WACOM_PKGLEN_MTOUCH, 26202, 16325, 255,
+ 0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE6 =
{ "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255,
- 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xEC =
{ "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1691,19 +1893,22 @@ static const struct wacom_features wacom_features_0x47 =
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x84 =
{ "Wacom Wireless Receiver", WACOM_PKGLEN_WIRELESS, 0, 0, 0,
- 0, WIRELESS, 0, 0 };
+ 0, WIRELESS, 0, 0, .touch_max = 16 };
static const struct wacom_features wacom_features_0xD0 =
{ "Wacom Bamboo 2FG", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD1 =
{ "Wacom Bamboo 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1712,28 +1917,35 @@ static const struct wacom_features wacom_features_0xD5 =
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD7 =
{ "Wacom BambooPT 2FG Small", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xDA =
{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13700, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 2 };
static const struct wacom_features wacom_features_0xDD =
{ "Wacom Bamboo Connect", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xDE =
{ "Wacom Bamboo 16FG 4x5", WACOM_PKGLEN_BBPEN, 14720, 9200, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 16 };
static const struct wacom_features wacom_features_0xDF =
{ "Wacom Bamboo 16FG 6x8", WACOM_PKGLEN_BBPEN, 21648, 13700, 1023,
- 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+ 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
+ .touch_max = 16 };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", WACOM_PKGLEN_GRAPHIRE, 12800, 8000, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1807,6 +2019,11 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0xBA) },
{ USB_DEVICE_WACOM(0xBB) },
{ USB_DEVICE_WACOM(0xBC) },
+ { USB_DEVICE_WACOM(0x26) },
+ { USB_DEVICE_WACOM(0x27) },
+ { USB_DEVICE_WACOM(0x28) },
+ { USB_DEVICE_WACOM(0x29) },
+ { USB_DEVICE_WACOM(0x2A) },
{ USB_DEVICE_WACOM(0x3F) },
{ USB_DEVICE_WACOM(0xC5) },
{ USB_DEVICE_WACOM(0xC6) },
@@ -1842,6 +2059,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x9F) },
{ USB_DEVICE_WACOM(0xE2) },
{ USB_DEVICE_WACOM(0xE3) },
+ { USB_DEVICE_WACOM(0xE5) },
{ USB_DEVICE_WACOM(0xE6) },
{ USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0x47) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index ba5a334e54d6..78fbd3f42009 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -25,6 +25,10 @@
#define WACOM_PKGLEN_BBTOUCH3 64
#define WACOM_PKGLEN_BBPEN 10
#define WACOM_PKGLEN_WIRELESS 32
+#define WACOM_PKGLEN_MTOUCH 62
+
+/* wacom data size per MT contact */
+#define WACOM_BYTES_PER_MT_PACKET 11
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
@@ -38,8 +42,10 @@
#define WACOM_REPORT_INTUOSREAD 5
#define WACOM_REPORT_INTUOSWRITE 6
#define WACOM_REPORT_INTUOSPAD 12
+#define WACOM_REPORT_INTUOS5PAD 3
#define WACOM_REPORT_TPC1FG 6
#define WACOM_REPORT_TPC2FG 13
+#define WACOM_REPORT_TPCMT 13
#define WACOM_REPORT_TPCHID 15
#define WACOM_REPORT_TPCST 16
@@ -65,6 +71,9 @@ enum {
INTUOS4S,
INTUOS4,
INTUOS4L,
+ INTUOS5S,
+ INTUOS5,
+ INTUOS5L,
WACOM_24HD,
WACOM_21UX2,
CINTIQ,
@@ -72,6 +81,7 @@ enum {
WACOM_MO,
TABLETPC,
TABLETPC2FG,
+ MTSCREEN,
MAX_TYPE
};
@@ -95,6 +105,7 @@ struct wacom_features {
int pressure_fuzz;
int distance_fuzz;
unsigned quirks;
+ unsigned touch_max;
};
struct wacom_shared {
@@ -113,6 +124,8 @@ struct wacom_wac {
struct input_dev *input;
int pid;
int battery_capacity;
+ int num_contacts_left;
+ int *slots;
};
#endif
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 75838d7710ce..98d263504eea 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -187,6 +187,23 @@ config TOUCHSCREEN_DA9034
Say Y here to enable the support for the touchscreen found
on Dialog Semiconductor DA9034 PMIC.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9034-ts.
+
+config TOUCHSCREEN_DA9052
+ tristate "Dialog DA9052/DA9053 TSI"
+ depends on PMIC_DA9052
+ help
+ Say Y here to support the touchscreen found on Dialog Semiconductor
+ DA9052-BC and DA9053-AA/Bx PMICs.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9052_tsi.
+
config TOUCHSCREEN_DYNAPRO
tristate "Dynapro serial touchscreen"
select SERIO
@@ -306,6 +323,18 @@ config TOUCHSCREEN_WACOM_W8001
To compile this driver as a module, choose M here: the
module will be called wacom_w8001.
+config TOUCHSCREEN_WACOM_I2C
+ tristate "Wacom Tablet support (I2C)"
+ depends on I2C
+ help
+ Say Y here if you want to use the I2C version of the Wacom
+ Pen Tablet.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wacom_i2c.
+
config TOUCHSCREEN_LPC32XX
tristate "LPC32XX touchscreen controller"
depends on ARCH_LPC32XX
@@ -635,6 +664,7 @@ config TOUCHSCREEN_USB_COMPOSITE
- Zytronic controllers
- Elo TouchSystems 2700 IntelliTouch
- EasyTouch USB Touch Controller from Data Modul
+ - e2i (Mimo monitors)
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -721,7 +751,7 @@ config TOUCHSCREEN_USB_ELO
config TOUCHSCREEN_USB_E2I
default y
- bool "e2i Touchscreen controller (e.g. from Mimo 740)"
+ bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE
config TOUCHSCREEN_USB_ZYTRONIC
@@ -744,7 +774,7 @@ config TOUCHSCREEN_USB_EASYTOUCH
bool "EasyTouch USB Touch controller device support" if EMBEDDED
depends on TOUCHSCREEN_USB_COMPOSITE
help
- Say Y here if you have a EasyTouch USB Touch controller device support.
+ Say Y here if you have an EasyTouch USB Touch controller.
If unsure, say N.
config TOUCHSCREEN_TOUCHIT213
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3d5cf8cbf89c..eb8bfe1c1a46 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o
obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9052) += da9052_tsi.o
obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
@@ -59,6 +60,7 @@ obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C) += wacom_i2c.o
obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX) += wm97xx-ts.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 19d4ea65ea01..42e645062c20 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -236,7 +236,6 @@ struct mxt_object {
struct mxt_message {
u8 reportid;
u8 message[7];
- u8 checksum;
};
struct mxt_finger {
@@ -326,17 +325,12 @@ static bool mxt_object_writable(unsigned int type)
}
static void mxt_dump_message(struct device *dev,
- struct mxt_message *message)
+ struct mxt_message *message)
{
- dev_dbg(dev, "reportid:\t0x%x\n", message->reportid);
- dev_dbg(dev, "message1:\t0x%x\n", message->message[0]);
- dev_dbg(dev, "message2:\t0x%x\n", message->message[1]);
- dev_dbg(dev, "message3:\t0x%x\n", message->message[2]);
- dev_dbg(dev, "message4:\t0x%x\n", message->message[3]);
- dev_dbg(dev, "message5:\t0x%x\n", message->message[4]);
- dev_dbg(dev, "message6:\t0x%x\n", message->message[5]);
- dev_dbg(dev, "message7:\t0x%x\n", message->message[6]);
- dev_dbg(dev, "checksum:\t0x%x\n", message->checksum);
+ dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n",
+ message->reportid, message->message[0], message->message[1],
+ message->message[2], message->message[3], message->message[4],
+ message->message[5], message->message[6]);
}
static int mxt_check_bootloader(struct i2c_client *client,
@@ -506,7 +500,7 @@ static int mxt_write_object(struct mxt_data *data,
u16 reg;
object = mxt_get_object(data, type);
- if (!object)
+ if (!object || offset >= object->size + 1)
return -EINVAL;
reg = object->start_address;
@@ -1049,8 +1043,8 @@ static ssize_t mxt_update_fw_store(struct device *dev,
return count;
}
-static DEVICE_ATTR(object, 0444, mxt_object_show, NULL);
-static DEVICE_ATTR(update_fw, 0664, NULL, mxt_update_fw_store);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_attrs[] = {
&dev_attr_object.attr,
@@ -1201,7 +1195,7 @@ static int __devexit mxt_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mxt_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -1239,13 +1233,10 @@ static int mxt_resume(struct device *dev)
return 0;
}
-
-static const struct dev_pm_ops mxt_pm_ops = {
- .suspend = mxt_suspend,
- .resume = mxt_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
static const struct i2c_device_id mxt_id[] = {
{ "qt602240_ts", 0 },
{ "atmel_mxt_ts", 0 },
@@ -1258,9 +1249,7 @@ static struct i2c_driver mxt_driver = {
.driver = {
.name = "atmel_mxt_ts",
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
.pm = &mxt_pm_ops,
-#endif
},
.probe = mxt_probe,
.remove = __devexit_p(mxt_remove),
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
new file mode 100644
index 000000000000..e8df341090c0
--- /dev/null
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -0,0 +1,370 @@
+/*
+ * TSI driver for Dialog DA9052
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+
+#define TSI_PEN_DOWN_STATUS 0x40
+
+struct da9052_tsi {
+ struct da9052 *da9052;
+ struct input_dev *dev;
+ struct delayed_work ts_pen_work;
+ struct mutex mutex;
+ unsigned int irq_pendwn;
+ unsigned int irq_datardy;
+ bool stopped;
+ bool adc_on;
+};
+
+static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on)
+{
+ da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on);
+ tsi->adc_on = on;
+}
+
+static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
+{
+ struct da9052_tsi *tsi = data;
+
+ if (!tsi->stopped) {
+ /* Mask PEN_DOWN event and unmask TSI_READY event */
+ disable_irq_nosync(tsi->irq_pendwn);
+ enable_irq(tsi->irq_datardy);
+
+ da9052_ts_adc_toggle(tsi, true);
+
+ schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void da9052_ts_read(struct da9052_tsi *tsi)
+{
+ struct input_dev *input = tsi->dev;
+ int ret;
+ u16 x, y, z;
+ u8 v;
+
+ ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG);
+ if (ret < 0)
+ return;
+
+ x = (u16) ret;
+
+ ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG);
+ if (ret < 0)
+ return;
+
+ y = (u16) ret;
+
+ ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG);
+ if (ret < 0)
+ return;
+
+ z = (u16) ret;
+
+ ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+ if (ret < 0)
+ return;
+
+ v = (u8) ret;
+
+ x = ((x << 2) & 0x3fc) | (v & 0x3);
+ y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2);
+ z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4);
+
+ input_report_key(input, BTN_TOUCH, 1);
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_PRESSURE, z);
+ input_sync(input);
+}
+
+static irqreturn_t da9052_ts_datardy_irq(int irq, void *data)
+{
+ struct da9052_tsi *tsi = data;
+
+ da9052_ts_read(tsi);
+
+ return IRQ_HANDLED;
+}
+
+static void da9052_ts_pen_work(struct work_struct *work)
+{
+ struct da9052_tsi *tsi = container_of(work, struct da9052_tsi,
+ ts_pen_work.work);
+ if (!tsi->stopped) {
+ int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+ if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) {
+ /* Pen is still DOWN (or read error) */
+ schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+ } else {
+ struct input_dev *input = tsi->dev;
+
+ /* Pen UP */
+ da9052_ts_adc_toggle(tsi, false);
+
+ /* Report Pen UP */
+ input_report_key(input, BTN_TOUCH, 0);
+ input_report_abs(input, ABS_PRESSURE, 0);
+ input_sync(input);
+
+ /*
+ * FIXME: Fixes the unhandled irq issue when quick
+ * pen down and pen up events occurs
+ */
+ ret = da9052_reg_update(tsi->da9052,
+ DA9052_EVENT_B_REG, 0xC0, 0xC0);
+ if (ret < 0)
+ return;
+
+ /* Mask TSI_READY event and unmask PEN_DOWN event */
+ disable_irq(tsi->irq_datardy);
+ enable_irq(tsi->irq_pendwn);
+ }
+ }
+}
+
+static int __devinit da9052_ts_configure_gpio(struct da9052 *da9052)
+{
+ int error;
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0);
+ if (error < 0)
+ return error;
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0);
+ if (error < 0)
+ return error;
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0);
+ if (error < 0)
+ return error;
+
+ return 0;
+}
+
+static int __devinit da9052_configure_tsi(struct da9052_tsi *tsi)
+{
+ int error;
+
+ error = da9052_ts_configure_gpio(tsi->da9052);
+ if (error)
+ return error;
+
+ /* Measure TSI sample every 1ms */
+ error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG,
+ 1 << 6, 1 << 6);
+ if (error < 0)
+ return error;
+
+ /* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */
+ error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0);
+ if (error < 0)
+ return error;
+
+ /* Supply TSIRef through LD09 */
+ error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59);
+ if (error < 0)
+ return error;
+
+ return 0;
+}
+
+static int da9052_ts_input_open(struct input_dev *input_dev)
+{
+ struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+ tsi->stopped = false;
+ mb();
+
+ /* Unmask PEN_DOWN event */
+ enable_irq(tsi->irq_pendwn);
+
+ /* Enable Pen Detect Circuit */
+ return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
+ 1 << 1, 1 << 1);
+}
+
+static void da9052_ts_input_close(struct input_dev *input_dev)
+{
+ struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+ tsi->stopped = true;
+ mb();
+ disable_irq(tsi->irq_pendwn);
+ cancel_delayed_work_sync(&tsi->ts_pen_work);
+
+ if (tsi->adc_on) {
+ disable_irq(tsi->irq_datardy);
+ da9052_ts_adc_toggle(tsi, false);
+
+ /*
+ * If ADC was on that means that pendwn IRQ was disabled
+ * twice and we need to enable it to keep enable/disable
+ * counter balanced. IRQ is still off though.
+ */
+ enable_irq(tsi->irq_pendwn);
+ }
+
+ /* Disable Pen Detect Circuit */
+ da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+}
+
+static int __devinit da9052_ts_probe(struct platform_device *pdev)
+{
+ struct da9052 *da9052;
+ struct da9052_tsi *tsi;
+ struct input_dev *input_dev;
+ int irq_pendwn;
+ int irq_datardy;
+ int error;
+
+ da9052 = dev_get_drvdata(pdev->dev.parent);
+ if (!da9052)
+ return -EINVAL;
+
+ irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
+ irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
+ if (irq_pendwn < 0 || irq_datardy < 0) {
+ dev_err(da9052->dev, "Unable to determine device interrupts\n");
+ return -ENXIO;
+ }
+
+ tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!tsi || !input_dev) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ tsi->da9052 = da9052;
+ tsi->dev = input_dev;
+ tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
+ tsi->irq_datardy = da9052->irq_base + irq_datardy;
+ tsi->stopped = true;
+ INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
+
+ input_dev->id.version = 0x0101;
+ input_dev->id.vendor = 0x15B6;
+ input_dev->id.product = 0x9052;
+ input_dev->name = "Dialog DA9052 TouchScreen Driver";
+ input_dev->dev.parent = &pdev->dev;
+ input_dev->open = da9052_ts_input_open;
+ input_dev->close = da9052_ts_input_close;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+
+ input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0);
+
+ input_set_drvdata(input_dev, tsi);
+
+ /* Disable Pen Detect Circuit */
+ da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+
+ /* Disable ADC */
+ da9052_ts_adc_toggle(tsi, false);
+
+ error = request_threaded_irq(tsi->irq_pendwn,
+ NULL, da9052_ts_pendwn_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "PENDWN", tsi);
+ if (error) {
+ dev_err(tsi->da9052->dev,
+ "Failed to register PENDWN IRQ %d, error = %d\n",
+ tsi->irq_pendwn, error);
+ goto err_free_mem;
+ }
+
+ error = request_threaded_irq(tsi->irq_datardy,
+ NULL, da9052_ts_datardy_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "TSIRDY", tsi);
+ if (error) {
+ dev_err(tsi->da9052->dev,
+ "Failed to register TSIRDY IRQ %d, error = %d\n",
+ tsi->irq_datardy, error);
+ goto err_free_pendwn_irq;
+ }
+
+ /* Mask PEN_DOWN and TSI_READY events */
+ disable_irq(tsi->irq_pendwn);
+ disable_irq(tsi->irq_datardy);
+
+ error = da9052_configure_tsi(tsi);
+ if (error)
+ goto err_free_datardy_irq;
+
+ error = input_register_device(tsi->dev);
+ if (error)
+ goto err_free_datardy_irq;
+
+ platform_set_drvdata(pdev, tsi);
+
+ return 0;
+
+err_free_datardy_irq:
+ free_irq(tsi->irq_datardy, tsi);
+err_free_pendwn_irq:
+ free_irq(tsi->irq_pendwn, tsi);
+err_free_mem:
+ kfree(tsi);
+ input_free_device(input_dev);
+
+ return error;
+}
+
+static int __devexit da9052_ts_remove(struct platform_device *pdev)
+{
+ struct da9052_tsi *tsi = platform_get_drvdata(pdev);
+
+ da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
+
+ free_irq(tsi->irq_pendwn, tsi);
+ free_irq(tsi->irq_datardy, tsi);
+
+ input_unregister_device(tsi->dev);
+ kfree(tsi);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver da9052_tsi_driver = {
+ .probe = da9052_ts_probe,
+ .remove = __devexit_p(da9052_ts_remove),
+ .driver = {
+ .name = "da9052-tsi",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(da9052_tsi_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052");
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-tsi");
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
index 455353908bdf..1809677a6513 100644
--- a/drivers/input/touchscreen/dynapro.c
+++ b/drivers/input/touchscreen/dynapro.c
@@ -188,19 +188,4 @@ static struct serio_driver dynapro_drv = {
.disconnect = dynapro_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init dynapro_init(void)
-{
- return serio_register_driver(&dynapro_drv);
-}
-
-static void __exit dynapro_exit(void)
-{
- serio_unregister_driver(&dynapro_drv);
-}
-
-module_init(dynapro_init);
-module_exit(dynapro_exit);
+module_serio_driver(dynapro_drv);
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index 486d31ba9c09..957423d1471d 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -405,19 +405,4 @@ static struct serio_driver elo_drv = {
.disconnect = elo_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init elo_init(void)
-{
- return serio_register_driver(&elo_drv);
-}
-
-static void __exit elo_exit(void)
-{
- serio_unregister_driver(&elo_drv);
-}
-
-module_init(elo_init);
-module_exit(elo_exit);
+module_serio_driver(elo_drv);
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
index 80b21800355f..10794ddbdf58 100644
--- a/drivers/input/touchscreen/fujitsu_ts.c
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -175,15 +175,4 @@ static struct serio_driver fujitsu_drv = {
.disconnect = fujitsu_disconnect,
};
-static int __init fujitsu_init(void)
-{
- return serio_register_driver(&fujitsu_drv);
-}
-
-static void __exit fujitsu_exit(void)
-{
- serio_unregister_driver(&fujitsu_drv);
-}
-
-module_init(fujitsu_init);
-module_exit(fujitsu_exit);
+module_serio_driver(fujitsu_drv);
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index a54f90e02ab6..41c71766bf18 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -186,19 +186,4 @@ static struct serio_driver gunze_drv = {
.disconnect = gunze_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init gunze_init(void)
-{
- return serio_register_driver(&gunze_drv);
-}
-
-static void __exit gunze_exit(void)
-{
- serio_unregister_driver(&gunze_drv);
-}
-
-module_init(gunze_init);
-module_exit(gunze_exit);
+module_serio_driver(gunze_drv);
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 6107e563e681..b9e8686a6f1c 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -476,19 +476,4 @@ static struct serio_driver h3600ts_drv = {
.disconnect = h3600ts_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init h3600ts_init(void)
-{
- return serio_register_driver(&h3600ts_drv);
-}
-
-static void __exit h3600ts_exit(void)
-{
- serio_unregister_driver(&h3600ts_drv);
-}
-
-module_init(h3600ts_init);
-module_exit(h3600ts_exit);
+module_serio_driver(h3600ts_drv);
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
index 2da6cc31bb21..0cc47ea98acf 100644
--- a/drivers/input/touchscreen/hampshire.c
+++ b/drivers/input/touchscreen/hampshire.c
@@ -187,19 +187,4 @@ static struct serio_driver hampshire_drv = {
.disconnect = hampshire_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init hampshire_init(void)
-{
- return serio_register_driver(&hampshire_drv);
-}
-
-static void __exit hampshire_exit(void)
-{
- serio_unregister_driver(&hampshire_drv);
-}
-
-module_init(hampshire_init);
-module_exit(hampshire_exit);
+module_serio_driver(hampshire_drv);
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
index 192ade0a0fb9..a29c99c32245 100644
--- a/drivers/input/touchscreen/inexio.c
+++ b/drivers/input/touchscreen/inexio.c
@@ -189,19 +189,4 @@ static struct serio_driver inexio_drv = {
.disconnect = inexio_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init inexio_init(void)
-{
- return serio_register_driver(&inexio_drv);
-}
-
-static void __exit inexio_exit(void)
-{
- serio_unregister_driver(&inexio_drv);
-}
-
-module_init(inexio_init);
-module_exit(inexio_exit);
+module_serio_driver(inexio_drv);
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
index afcd0691ec67..4c2b8ed3bf16 100644
--- a/drivers/input/touchscreen/lpc32xx_ts.c
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/of.h>
/*
* Touchscreen controller register offsets
@@ -383,6 +384,14 @@ static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
#define LPC32XX_TS_PM_OPS NULL
#endif
+#ifdef CONFIG_OF
+static struct of_device_id lpc32xx_tsc_of_match[] = {
+ { .compatible = "nxp,lpc3220-tsc", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
+#endif
+
static struct platform_driver lpc32xx_ts_driver = {
.probe = lpc32xx_ts_probe,
.remove = __devexit_p(lpc32xx_ts_remove),
@@ -390,6 +399,7 @@ static struct platform_driver lpc32xx_ts_driver = {
.name = MOD_NAME,
.owner = THIS_MODULE,
.pm = LPC32XX_TS_PM_OPS,
+ .of_match_table = of_match_ptr(lpc32xx_tsc_of_match),
},
};
module_platform_driver(lpc32xx_ts_driver);
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
index 9077228418b7..eb66b7c37c2f 100644
--- a/drivers/input/touchscreen/mtouch.c
+++ b/drivers/input/touchscreen/mtouch.c
@@ -202,19 +202,4 @@ static struct serio_driver mtouch_drv = {
.disconnect = mtouch_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init mtouch_init(void)
-{
- return serio_register_driver(&mtouch_drv);
-}
-
-static void __exit mtouch_exit(void)
-{
- serio_unregister_driver(&mtouch_drv);
-}
-
-module_init(mtouch_init);
-module_exit(mtouch_exit);
+module_serio_driver(mtouch_drv);
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
index 4c012fb2b01e..4ccde45b9da2 100644
--- a/drivers/input/touchscreen/penmount.c
+++ b/drivers/input/touchscreen/penmount.c
@@ -317,19 +317,4 @@ static struct serio_driver pm_drv = {
.disconnect = pm_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init pm_init(void)
-{
- return serio_register_driver(&pm_drv);
-}
-
-static void __exit pm_exit(void)
-{
- serio_unregister_driver(&pm_drv);
-}
-
-module_init(pm_init);
-module_exit(pm_exit);
+module_serio_driver(pm_drv);
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index cbbf71b22696..6cb68a1981bf 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -218,7 +218,7 @@ static int __devexit st1232_ts_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int st1232_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -243,18 +243,25 @@ static int st1232_ts_resume(struct device *dev)
return 0;
}
-static const struct dev_pm_ops st1232_ts_pm_ops = {
- .suspend = st1232_ts_suspend,
- .resume = st1232_ts_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
+ st1232_ts_suspend, st1232_ts_resume);
+
static const struct i2c_device_id st1232_ts_id[] = {
{ ST1232_TS_NAME, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
+#ifdef CONFIG_OF
+static const struct of_device_id st1232_ts_dt_ids[] __devinitconst = {
+ { .compatible = "sitronix,st1232", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
+#endif
+
static struct i2c_driver st1232_ts_driver = {
.probe = st1232_ts_probe,
.remove = __devexit_p(st1232_ts_remove),
@@ -262,9 +269,8 @@ static struct i2c_driver st1232_ts_driver = {
.driver = {
.name = ST1232_TS_NAME,
.owner = THIS_MODULE,
-#ifdef CONFIG_PM
+ .of_match_table = of_match_ptr(st1232_ts_dt_ids),
.pm = &st1232_ts_pm_ops,
-#endif
},
};
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
index d1297ba19daf..5f29e5b8e1c1 100644
--- a/drivers/input/touchscreen/touchit213.c
+++ b/drivers/input/touchscreen/touchit213.c
@@ -216,19 +216,4 @@ static struct serio_driver touchit213_drv = {
.disconnect = touchit213_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init touchit213_init(void)
-{
- return serio_register_driver(&touchit213_drv);
-}
-
-static void __exit touchit213_exit(void)
-{
- serio_unregister_driver(&touchit213_drv);
-}
-
-module_init(touchit213_init);
-module_exit(touchit213_exit);
+module_serio_driver(touchit213_drv);
diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c
index 3a5c142c2a78..8a2887daf194 100644
--- a/drivers/input/touchscreen/touchright.c
+++ b/drivers/input/touchscreen/touchright.c
@@ -176,19 +176,4 @@ static struct serio_driver tr_drv = {
.disconnect = tr_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tr_init(void)
-{
- return serio_register_driver(&tr_drv);
-}
-
-static void __exit tr_exit(void)
-{
- serio_unregister_driver(&tr_drv);
-}
-
-module_init(tr_init);
-module_exit(tr_exit);
+module_serio_driver(tr_drv);
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
index 763a656a59f8..588cdcb839dd 100644
--- a/drivers/input/touchscreen/touchwin.c
+++ b/drivers/input/touchscreen/touchwin.c
@@ -183,19 +183,4 @@ static struct serio_driver tw_drv = {
.disconnect = tw_disconnect,
};
-/*
- * The functions for inserting/removing us as a module.
- */
-
-static int __init tw_init(void)
-{
- return serio_register_driver(&tw_drv);
-}
-
-static void __exit tw_exit(void)
-{
- serio_unregister_driver(&tw_drv);
-}
-
-module_init(tw_init);
-module_exit(tw_exit);
+module_serio_driver(tw_drv);
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
index 29d5ed4dd31c..63209aaa55f0 100644
--- a/drivers/input/touchscreen/tsc40.c
+++ b/drivers/input/touchscreen/tsc40.c
@@ -167,17 +167,7 @@ static struct serio_driver tsc_drv = {
.disconnect = tsc_disconnect,
};
-static int __init tsc_ser_init(void)
-{
- return serio_register_driver(&tsc_drv);
-}
-module_init(tsc_ser_init);
-
-static void __exit tsc_exit(void)
-{
- serio_unregister_driver(&tsc_drv);
-}
-module_exit(tsc_exit);
+module_serio_driver(tsc_drv);
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
new file mode 100644
index 000000000000..35572575d34a
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -0,0 +1,282 @@
+/*
+ * Wacom Penabled Driver for I2C
+ *
+ * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * <tobita.tatsunosuke@wacom.co.jp>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version of 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/unaligned.h>
+
+#define WACOM_CMD_QUERY0 0x04
+#define WACOM_CMD_QUERY1 0x00
+#define WACOM_CMD_QUERY2 0x33
+#define WACOM_CMD_QUERY3 0x02
+#define WACOM_CMD_THROW0 0x05
+#define WACOM_CMD_THROW1 0x00
+#define WACOM_QUERY_SIZE 19
+#define WACOM_RETRY_CNT 100
+
+struct wacom_features {
+ int x_max;
+ int y_max;
+ int pressure_max;
+ char fw_version;
+};
+
+struct wacom_i2c {
+ struct i2c_client *client;
+ struct input_dev *input;
+ u8 data[WACOM_QUERY_SIZE];
+};
+
+static int wacom_query_device(struct i2c_client *client,
+ struct wacom_features *features)
+{
+ int ret;
+ u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
+ WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
+ u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
+ u8 data[WACOM_QUERY_SIZE];
+ struct i2c_msg msgs[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(cmd1),
+ .buf = cmd1,
+ },
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(cmd2),
+ .buf = cmd2,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = sizeof(data),
+ .buf = data,
+ },
+ };
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ features->x_max = get_unaligned_le16(&data[3]);
+ features->y_max = get_unaligned_le16(&data[5]);
+ features->pressure_max = get_unaligned_le16(&data[11]);
+ features->fw_version = get_unaligned_le16(&data[13]);
+
+ dev_dbg(&client->dev,
+ "x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
+ features->x_max, features->y_max,
+ features->pressure_max, features->fw_version);
+
+ return 0;
+}
+
+static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
+{
+ struct wacom_i2c *wac_i2c = dev_id;
+ struct input_dev *input = wac_i2c->input;
+ u8 *data = wac_i2c->data;
+ unsigned int x, y, pressure;
+ unsigned char tsw, f1, f2, ers;
+ int error;
+
+ error = i2c_master_recv(wac_i2c->client,
+ wac_i2c->data, sizeof(wac_i2c->data));
+ if (error < 0)
+ goto out;
+
+ tsw = data[3] & 0x01;
+ ers = data[3] & 0x04;
+ f1 = data[3] & 0x02;
+ f2 = data[3] & 0x10;
+ x = le16_to_cpup((__le16 *)&data[4]);
+ y = le16_to_cpup((__le16 *)&data[6]);
+ pressure = le16_to_cpup((__le16 *)&data[8]);
+
+ input_report_key(input, BTN_TOUCH, tsw || ers);
+ input_report_key(input, BTN_TOOL_PEN, tsw);
+ input_report_key(input, BTN_TOOL_RUBBER, ers);
+ input_report_key(input, BTN_STYLUS, f1);
+ input_report_key(input, BTN_STYLUS2, f2);
+ input_report_abs(input, ABS_X, x);
+ input_report_abs(input, ABS_Y, y);
+ input_report_abs(input, ABS_PRESSURE, pressure);
+ input_sync(input);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int wacom_i2c_open(struct input_dev *dev)
+{
+ struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+ struct i2c_client *client = wac_i2c->client;
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static void wacom_i2c_close(struct input_dev *dev)
+{
+ struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+ struct i2c_client *client = wac_i2c->client;
+
+ disable_irq(client->irq);
+}
+
+static int __devinit wacom_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct wacom_i2c *wac_i2c;
+ struct input_dev *input;
+ struct wacom_features features;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ dev_err(&client->dev, "i2c_check_functionality error\n");
+ return -EIO;
+ }
+
+ error = wacom_query_device(client, &features);
+ if (error)
+ return error;
+
+ wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!wac_i2c || !input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ wac_i2c->client = client;
+ wac_i2c->input = input;
+
+ input->name = "Wacom I2C Digitizer";
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x56a;
+ input->id.version = features.fw_version;
+ input->dev.parent = &client->dev;
+ input->open = wacom_i2c_open;
+ input->close = wacom_i2c_close;
+
+ input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+ __set_bit(BTN_TOOL_PEN, input->keybit);
+ __set_bit(BTN_TOOL_RUBBER, input->keybit);
+ __set_bit(BTN_STYLUS, input->keybit);
+ __set_bit(BTN_STYLUS2, input->keybit);
+ __set_bit(BTN_TOUCH, input->keybit);
+
+ input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE,
+ 0, features.pressure_max, 0, 0);
+
+ input_set_drvdata(input, wac_i2c);
+
+ error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "wacom_i2c", wac_i2c);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to enable IRQ, error: %d\n", error);
+ goto err_free_mem;
+ }
+
+ /* Disable the IRQ, we'll enable it in wac_i2c_open() */
+ disable_irq(client->irq);
+
+ error = input_register_device(wac_i2c->input);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to register input device, error: %d\n", error);
+ goto err_free_irq;
+ }
+
+ i2c_set_clientdata(client, wac_i2c);
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, wac_i2c);
+err_free_mem:
+ input_free_device(input);
+ kfree(wac_i2c);
+
+ return error;
+}
+
+static int __devexit wacom_i2c_remove(struct i2c_client *client)
+{
+ struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
+
+ free_irq(client->irq, wac_i2c);
+ input_unregister_device(wac_i2c->input);
+ kfree(wac_i2c);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int wacom_i2c_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ disable_irq(client->irq);
+
+ return 0;
+}
+
+static int wacom_i2c_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
+
+static const struct i2c_device_id wacom_i2c_id[] = {
+ { "WAC_I2C_EMR", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
+
+static struct i2c_driver wacom_i2c_driver = {
+ .driver = {
+ .name = "wacom_i2c",
+ .owner = THIS_MODULE,
+ .pm = &wacom_i2c_pm,
+ },
+
+ .probe = wacom_i2c_probe,
+ .remove = __devexit_p(wacom_i2c_remove),
+ .id_table = wacom_i2c_id,
+};
+module_i2c_driver(wacom_i2c_driver);
+
+MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>");
+MODULE_DESCRIPTION("WACOM EMR I2C Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 1569a3934ab2..8f9ad2f893b8 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -594,15 +594,4 @@ static struct serio_driver w8001_drv = {
.disconnect = w8001_disconnect,
};
-static int __init w8001_init(void)
-{
- return serio_register_driver(&w8001_drv);
-}
-
-static void __exit w8001_exit(void)
-{
- serio_unregister_driver(&w8001_drv);
-}
-
-module_init(w8001_init);
-module_exit(w8001_exit);
+module_serio_driver(w8001_drv);