summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard/Kconfig
diff options
context:
space:
mode:
authorDmitry Torokhov <dmitry.torokhov@gmail.com>2009-06-29 00:00:52 -0700
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2009-06-29 00:30:09 -0700
commitcb589529f74d69abc111887b45308f333f950ade (patch)
tree8837bc65fccde6354461f6a53a1680343fb1b23d /drivers/input/keyboard/Kconfig
parentda0d03fe6cecde837f113a8a587f5a872d0fade0 (diff)
Input: arrange keyboards alphabetically
Hopefully it will reduce conflicts when merging patches. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Diffstat (limited to 'drivers/input/keyboard/Kconfig')
-rw-r--r--drivers/input/keyboard/Kconfig291
1 files changed, 145 insertions, 146 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796c6745..d2df1030675a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD
if INPUT_KEYBOARD
+config KEYBOARD_AAED2000
+ tristate "AAED-2000 keyboard"
+ depends on MACH_AAED2000
+ select INPUT_POLLDEV
+ default y
+ help
+ Say Y here to enable the keyboard on the Agilent AAED-2000
+ development board.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+ tristate "Amiga keyboard"
+ depends on AMIGA
+ help
+ Say Y here if you are running Linux on any AMIGA and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called amikbd.
+
+config ATARI_KBD_CORE
+ bool
+
+config KEYBOARD_ATARI
+ tristate "Atari keyboard"
+ depends on ATARI
+ select ATARI_KBD_CORE
+ help
+ Say Y here if you are running Linux on any Atari and have a keyboard
+ attached.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atakbd.
+
config KEYBOARD_ATKBD
tristate "AT keyboard" if EMBEDDED || !X86
default y
@@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
right-hand column will be interpreted as the key shown in the
left-hand column.
-config KEYBOARD_SUNKBD
- tristate "Sun Type 4 and Type 5 keyboard"
- select SERIO
- help
- Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
- connected either to the Sun keyboard connector or to an serial
- (RS-232) port via a simple adapter.
-
- To compile this driver as a module, choose M here: the
- module will be called sunkbd.
-
-config KEYBOARD_LKKBD
- tristate "DECstation/VAXstation LK201/LK401 keyboard"
- select SERIO
- help
- Say Y here if you want to use a LK201 or LK401 style serial
- keyboard. This keyboard is also useable on PCs if you attach
- it with the inputattach program. The connector pinout is
- described within lkkbd.c.
-
- To compile this driver as a module, choose M here: the
- module will be called lkkbd.
-
-config KEYBOARD_LOCOMO
- tristate "LoCoMo Keyboard Support"
- depends on SHARP_LOCOMO && INPUT_KEYBOARD
- help
- Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
-
- To compile this driver as a module, choose M here: the
- module will be called locomokbd.
-
-config KEYBOARD_XTKBD
- tristate "XT keyboard"
- select SERIO
- help
- Say Y here if you want to use the old IBM PC/XT keyboard (or
- compatible) on your system. This is only possible with a
- parallel port keyboard adapter, you cannot connect it to the
- keyboard port on a PC that runs Linux.
-
- To compile this driver as a module, choose M here: the
- module will be called xtkbd.
-
-config KEYBOARD_NEWTON
- tristate "Newton keyboard"
- select SERIO
- help
- Say Y here if you have a Newton keyboard on a serial port.
-
- To compile this driver as a module, choose M here: the
- module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
- tristate "Stowaway keyboard"
- select SERIO
+config KEYBOARD_BFIN
+ tristate "Blackfin BF54x keypad support"
+ depends on (BF54x && !BF544)
help
- Say Y here if you have a Stowaway keyboard on a serial port.
- Stowaway compatible keyboards like Dicota Input-PDA keyboard
- are also supported by this driver.
+ Say Y here if you want to use the BF54x keypad.
To compile this driver as a module, choose M here: the
- module will be called stowaway.
+ module will be called bf54x-keys.
config KEYBOARD_CORGI
tristate "Corgi keyboard"
@@ -143,61 +124,41 @@ config KEYBOARD_CORGI
To compile this driver as a module, choose M here: the
module will be called corgikbd.
-config KEYBOARD_SPITZ
- tristate "Spitz keyboard"
- depends on PXA_SHARPSL
- default y
+config KEYBOARD_LKKBD
+ tristate "DECstation/VAXstation LK201/LK401 keyboard"
+ select SERIO
help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
- SL-C3000 and Sl-C3100 series of PDAs.
+ Say Y here if you want to use a LK201 or LK401 style serial
+ keyboard. This keyboard is also useable on PCs if you attach
+ it with the inputattach program. The connector pinout is
+ described within lkkbd.c.
To compile this driver as a module, choose M here: the
- module will be called spitzkbd.
+ module will be called lkkbd.
-config KEYBOARD_TOSA
- tristate "Tosa keyboard"
- depends on MACH_TOSA
- default y
+config KEYBOARD_EP93XX
+ tristate "EP93xx Matrix Keypad support"
+ depends on ARCH_EP93XX
help
- Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+ Say Y here to enable the matrix keypad on the Cirrus EP93XX.
To compile this driver as a module, choose M here: the
- module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
- bool "Tosa keyboard: use extended keycodes"
- depends on KEYBOARD_TOSA
- default n
- help
- Say Y here to enable the tosa keyboard driver to generate extended
- (>= 127) keycodes. Be aware, that they can't be correctly interpreted
- by either console keyboard driver or by Kdrive keybd driver.
-
- Say Y only if you know, what you are doing!
+ module will be called ep93xx_keypad.
-config KEYBOARD_AMIGA
- tristate "Amiga keyboard"
- depends on AMIGA
+config KEYBOARD_GPIO
+ tristate "GPIO Buttons"
+ depends on GENERIC_GPIO
help
- Say Y here if you are running Linux on any AMIGA and have a keyboard
- attached.
-
- To compile this driver as a module, choose M here: the
- module will be called amikbd.
-
-config ATARI_KBD_CORE
- bool
+ This driver implements support for buttons connected
+ to GPIO pins of various CPUs (and some other chips).
-config KEYBOARD_ATARI
- tristate "Atari keyboard"
- depends on ATARI
- select ATARI_KBD_CORE
- help
- Say Y here if you are running Linux on any Atari and have a keyboard
- attached.
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
To compile this driver as a module, choose M here: the
- module will be called atakbd.
+ module will be called gpio-keys.
config KEYBOARD_HIL_OLD
tristate "HP HIL keyboard support (simple driver)"
@@ -261,14 +222,33 @@ config KEYBOARD_LM8323
To compile this driver as a module, choose M here: the
module will be called lm8323.
-config KEYBOARD_OMAP
- tristate "TI OMAP keypad support"
- depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+ tristate "LoCoMo Keyboard Support"
+ depends on SHARP_LOCOMO
help
- Say Y here if you want to use the OMAP keypad.
+ Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
To compile this driver as a module, choose M here: the
- module will be called omap-keypad.
+ module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+ tristate "Maple bus keyboard"
+ depends on SH_DREAMCAST && MAPLE
+ help
+ Say Y here if you have a Dreamcast console running Linux and have
+ a keyboard attached to its Maple bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+ tristate "Newton keyboard"
+ select SERIO
+ help
+ Say Y here if you have a Newton keyboard on a serial port.
+
+ To compile this driver as a module, choose M here: the
+ module will be called newtonkbd.
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
@@ -288,51 +268,38 @@ config KEYBOARD_PXA930_ROTARY
To compile this driver as a module, choose M here: the
module will be called pxa930_rotary.
-config KEYBOARD_AAED2000
- tristate "AAED-2000 keyboard"
- depends on MACH_AAED2000
- select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+ tristate "Spitz keyboard"
+ depends on PXA_SHARPSL
default y
help
- Say Y here to enable the keyboard on the Agilent AAED-2000
- development board.
-
- To compile this driver as a module, choose M here: the
- module will be called aaed2000_kbd.
-
-config KEYBOARD_GPIO
- tristate "GPIO Buttons"
- depends on GENERIC_GPIO
- help
- This driver implements support for buttons connected
- to GPIO pins of various CPUs (and some other chips).
-
- Say Y here if your device has buttons connected
- directly to such GPIO pins. Your board-specific
- setup logic must also provide a platform device,
- with configuration data saying which GPIOs are used.
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+ SL-C3000 and Sl-C3100 series of PDAs.
To compile this driver as a module, choose M here: the
- module will be called gpio-keys.
+ module will be called spitzkbd.
-config KEYBOARD_MAPLE
- tristate "Maple bus keyboard"
- depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_STOWAWAY
+ tristate "Stowaway keyboard"
+ select SERIO
help
- Say Y here if you have a Dreamcast console running Linux and have
- a keyboard attached to its Maple bus.
+ Say Y here if you have a Stowaway keyboard on a serial port.
+ Stowaway compatible keyboards like Dicota Input-PDA keyboard
+ are also supported by this driver.
To compile this driver as a module, choose M here: the
- module will be called maple_keyb.
+ module will be called stowaway.
-config KEYBOARD_BFIN
- tristate "Blackfin BF54x keypad support"
- depends on (BF54x && !BF544)
+config KEYBOARD_SUNKBD
+ tristate "Sun Type 4 and Type 5 keyboard"
+ select SERIO
help
- Say Y here if you want to use the BF54x keypad.
+ Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+ connected either to the Sun keyboard connector or to an serial
+ (RS-232) port via a simple adapter.
To compile this driver as a module, choose M here: the
- module will be called bf54x-keys.
+ module will be called sunkbd.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
@@ -344,13 +311,45 @@ config KEYBOARD_SH_KEYSC
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
-config KEYBOARD_EP93XX
- tristate "EP93xx Matrix Keypad support"
- depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+ tristate "TI OMAP keypad support"
+ depends on (ARCH_OMAP1 || ARCH_OMAP2)
help
- Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+ Say Y here if you want to use the OMAP keypad.
To compile this driver as a module, choose M here: the
- module will be called ep93xx_keypad.
+ module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+ tristate "Tosa keyboard"
+ depends on MACH_TOSA
+ default y
+ help
+ Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+ To compile this driver as a module, choose M here: the
+ module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+ bool "Tosa keyboard: use extended keycodes"
+ depends on KEYBOARD_TOSA
+ help
+ Say Y here to enable the tosa keyboard driver to generate extended
+ (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+ by either console keyboard driver or by Kdrive keybd driver.
+
+ Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+ tristate "XT keyboard"
+ select SERIO
+ help
+ Say Y here if you want to use the old IBM PC/XT keyboard (or
+ compatible) on your system. This is only possible with a
+ parallel port keyboard adapter, you cannot connect it to the
+ keyboard port on a PC that runs Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called xtkbd.
endif