drm/vmwgfx: Perform topology validation during atomic modeset.

This patch adds display (primary) memory validation during modeset
check. Display memory validation are applicable to both SOU and STDU,
so allow both display unit to undergo this check.

Also added check for SVGA_CAP_NO_BB_RESTRICTION capability which lifts
bounding box restriction for STDU.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

1 files changed, 29 insertions, 2 deletions

diff --git a/drivers/gpu/drm/vmwgfx/device_include/svga_reg.h b/drivers/gpu/drm/vmwgfx/device_include/svga_reg.h
index 88e72bf9a534..cdd48a3763db 100644
--- a/drivers/gpu/drm/vmwgfx/device_include/svga_reg.h
+++ b/drivers/gpu/drm/vmwgfx/device_include/svga_reg.h
@@ -672,8 +672,34 @@ SVGASignedPoint;
  * SVGA_CAP_GBOBJECTS --
  *    Enable guest-backed objects and surfaces.
  *
- * SVGA_CAP_CMD_BUFFERS_3 --
- *    Enable support for command buffers in a mob.
+ * SVGA_CAP_DX --
+ *    Enable support for DX commands, and command buffers in a mob.
+ *
+ * SVGA_CAP_HP_CMD_QUEUE --
+ *    Enable support for the high priority command queue, and the
+ *    ScreenCopy command.
+ *
+ * SVGA_CAP_NO_BB_RESTRICTION --
+ *    Allow ScreenTargets to be defined without regard to the 32-bpp
+ *    bounding-box memory restrictions. ie:
+ *
+ *    The summed memory usage of all screens (assuming they were defined as
+ *    32-bpp) must always be less than the value of the
+ *    SVGA_REG_MAX_PRIMARY_MEM register.
+ *
+ *    If this cap is not present, the 32-bpp bounding box around all screens
+ *    must additionally be under the value of the SVGA_REG_MAX_PRIMARY_MEM
+ *    register.
+ *
+ *    If the cap is present, the bounding box restriction is lifted (and only
+ *    the screen-sum limit applies).
+ *
+ *    (Note that this is a slight lie... there is still a sanity limit on any
+ *     dimension of the topology to be less than SVGA_SCREEN_ROOT_LIMIT, even
+ *     when SVGA_CAP_NO_BB_RESTRICTION is present, but that should be
+ *     large enough to express any possible topology without holes between
+ *     monitors.)
+ *
  */
 
 #define SVGA_CAP_NONE               0x00000000
@@ -699,6 +725,7 @@ SVGASignedPoint;
 #define SVGA_CAP_GBOBJECTS          0x08000000
 #define SVGA_CAP_DX                 0x10000000
 #define SVGA_CAP_HP_CMD_QUEUE       0x20000000
+#define SVGA_CAP_NO_BB_RESTRICTION  0x40000000
 
 #define SVGA_CAP_CMD_RESERVED       0x80000000