summaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
authorZhu, Lejun <lejun.zhu@linux.intel.com>2014-06-03 13:26:04 +0800
committerLee Jones <lee.jones@linaro.org>2014-06-17 15:59:52 +0100
commit104fb1d5153c563f453cb9c048fa0a17318a2348 (patch)
tree7fb0b7409fb50cd392b81634f477d1e56145fed3 /drivers/gpio
parent7cf0a66f32eddd5224a288df427f9dfce11f570c (diff)
gpio: Add support for Intel Crystal Cove PMIC
Devices based on Intel SoC products such as Baytrail have a Power Management IC. In the PMIC there are subsystems for voltage regulation, A/D conversion, GPIO and PWMs. The PMIC in Baytrail-T platform is called Crystal Cove. This patch adds support for the GPIO function in Crystal Cove. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig13
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-crystalcove.c379
3 files changed, 393 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4a1b5113e527..4a065b45330f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -450,6 +450,19 @@ config GPIO_ARIZONA
help
Support for GPIOs on Wolfson Arizona class devices.
+config GPIO_CRYSTAL_COVE
+ tristate "GPIO support for Crystal Cove PMIC"
+ depends on INTEL_SOC_PMIC
+ select GPIOLIB_IRQCHIP
+ help
+ Support for GPIO pins on Crystal Cove PMIC.
+
+ Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
+ inside.
+
+ This driver can also be built as a module. If so, the module will be
+ called gpio-crystalcove.
+
config GPIO_LP3943
tristate "TI/National Semiconductor LP3943 GPIO expander"
depends on MFD_LP3943
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d10f6a9d875a..e18e9564b073 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
+obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
new file mode 100644
index 000000000000..5a9849943798
--- /dev/null
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -0,0 +1,379 @@
+/*
+ * gpio-crystalcove.c - Intel Crystal Cove GPIO Driver
+ *
+ * Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Author: Yang, Bin <bin.yang@intel.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/mfd/intel_soc_pmic.h>
+
+#define CRYSTALCOVE_GPIO_NUM 16
+
+#define UPDATE_IRQ_TYPE BIT(0)
+#define UPDATE_IRQ_MASK BIT(1)
+
+#define GPIO0IRQ 0x0b
+#define GPIO1IRQ 0x0c
+#define MGPIO0IRQS0 0x19
+#define MGPIO1IRQS0 0x1a
+#define MGPIO0IRQSX 0x1b
+#define MGPIO1IRQSX 0x1c
+#define GPIO0P0CTLO 0x2b
+#define GPIO0P0CTLI 0x33
+#define GPIO1P0CTLO 0x3b
+#define GPIO1P0CTLI 0x43
+
+#define CTLI_INTCNT_DIS (0)
+#define CTLI_INTCNT_NE (1 << 1)
+#define CTLI_INTCNT_PE (2 << 1)
+#define CTLI_INTCNT_BE (3 << 1)
+
+#define CTLO_DIR_IN (0)
+#define CTLO_DIR_OUT (1 << 5)
+
+#define CTLO_DRV_CMOS (0)
+#define CTLO_DRV_OD (1 << 4)
+
+#define CTLO_DRV_REN (1 << 3)
+
+#define CTLO_RVAL_2KDW (0)
+#define CTLO_RVAL_2KUP (1 << 1)
+#define CTLO_RVAL_50KDW (2 << 1)
+#define CTLO_RVAL_50KUP (3 << 1)
+
+#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
+#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
+
+enum ctrl_register {
+ CTRL_IN,
+ CTRL_OUT,
+};
+
+/**
+ * struct crystalcove_gpio - Crystal Cove GPIO controller
+ * @buslock: for bus lock/sync and unlock.
+ * @chip: the abstract gpio_chip structure.
+ * @regmap: the regmap from the parent device.
+ * @update: pending IRQ setting update, to be written to the chip upon unlock.
+ * @intcnt_value: the Interrupt Detect value to be written.
+ * @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
+ */
+struct crystalcove_gpio {
+ struct mutex buslock; /* irq_bus_lock */
+ struct gpio_chip chip;
+ struct regmap *regmap;
+ int update;
+ int intcnt_value;
+ bool set_irq_mask;
+};
+
+static inline struct crystalcove_gpio *to_cg(struct gpio_chip *gc)
+{
+ return container_of(gc, struct crystalcove_gpio, chip);
+}
+
+static inline int to_reg(int gpio, enum ctrl_register reg_type)
+{
+ int reg;
+
+ if (reg_type == CTRL_IN) {
+ if (gpio < 8)
+ reg = GPIO0P0CTLI;
+ else
+ reg = GPIO1P0CTLI;
+ } else {
+ if (gpio < 8)
+ reg = GPIO0P0CTLO;
+ else
+ reg = GPIO1P0CTLO;
+ }
+
+ return reg + gpio % 8;
+}
+
+static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg,
+ int gpio)
+{
+ u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
+ int mask = BIT(gpio % 8);
+
+ if (cg->set_irq_mask)
+ regmap_update_bits(cg->regmap, mirqs0, mask, mask);
+ else
+ regmap_update_bits(cg->regmap, mirqs0, mask, 0);
+}
+
+static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio)
+{
+ int reg = to_reg(gpio, CTRL_IN);
+
+ regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value);
+}
+
+static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
+{
+ struct crystalcove_gpio *cg = to_cg(chip);
+
+ return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
+ CTLO_INPUT_SET);
+}
+
+static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned gpio,
+ int value)
+{
+ struct crystalcove_gpio *cg = to_cg(chip);
+
+ return regmap_write(cg->regmap, to_reg(gpio, CTRL_OUT),
+ CTLO_OUTPUT_SET | value);
+}
+
+static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+ struct crystalcove_gpio *cg = to_cg(chip);
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &val);
+ if (ret)
+ return ret;
+
+ return val & 0x1;
+}
+
+static void crystalcove_gpio_set(struct gpio_chip *chip,
+ unsigned gpio, int value)
+{
+ struct crystalcove_gpio *cg = to_cg(chip);
+
+ if (value)
+ regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 1);
+ else
+ regmap_update_bits(cg->regmap, to_reg(gpio, CTRL_OUT), 1, 0);
+}
+
+static int crystalcove_irq_type(struct irq_data *data, unsigned type)
+{
+ struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ cg->intcnt_value = CTLI_INTCNT_DIS;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ cg->intcnt_value = CTLI_INTCNT_BE;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ cg->intcnt_value = CTLI_INTCNT_PE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ cg->intcnt_value = CTLI_INTCNT_NE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cg->update |= UPDATE_IRQ_TYPE;
+
+ return 0;
+}
+
+static void crystalcove_bus_lock(struct irq_data *data)
+{
+ struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+ mutex_lock(&cg->buslock);
+}
+
+static void crystalcove_bus_sync_unlock(struct irq_data *data)
+{
+ struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+ int gpio = data->hwirq;
+
+ if (cg->update & UPDATE_IRQ_TYPE)
+ crystalcove_update_irq_ctrl(cg, gpio);
+ if (cg->update & UPDATE_IRQ_MASK)
+ crystalcove_update_irq_mask(cg, gpio);
+ cg->update = 0;
+
+ mutex_unlock(&cg->buslock);
+}
+
+static void crystalcove_irq_unmask(struct irq_data *data)
+{
+ struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+ cg->set_irq_mask = false;
+ cg->update |= UPDATE_IRQ_MASK;
+}
+
+static void crystalcove_irq_mask(struct irq_data *data)
+{
+ struct crystalcove_gpio *cg = to_cg(irq_data_get_irq_chip_data(data));
+
+ cg->set_irq_mask = true;
+ cg->update |= UPDATE_IRQ_MASK;
+}
+
+static struct irq_chip crystalcove_irqchip = {
+ .name = "Crystal Cove",
+ .irq_mask = crystalcove_irq_mask,
+ .irq_unmask = crystalcove_irq_unmask,
+ .irq_set_type = crystalcove_irq_type,
+ .irq_bus_lock = crystalcove_bus_lock,
+ .irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
+};
+
+static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
+{
+ struct crystalcove_gpio *cg = data;
+ unsigned int p0, p1;
+ int pending;
+ int gpio;
+ unsigned int virq;
+
+ if (regmap_read(cg->regmap, GPIO0IRQ, &p0) ||
+ regmap_read(cg->regmap, GPIO1IRQ, &p1))
+ return IRQ_NONE;
+
+ regmap_write(cg->regmap, GPIO0IRQ, p0);
+ regmap_write(cg->regmap, GPIO1IRQ, p1);
+
+ pending = p0 | p1 << 8;
+
+ for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+ if (pending & BIT(gpio)) {
+ virq = irq_find_mapping(cg->chip.irqdomain, gpio);
+ generic_handle_irq(virq);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void crystalcove_gpio_dbg_show(struct seq_file *s,
+ struct gpio_chip *chip)
+{
+ struct crystalcove_gpio *cg = to_cg(chip);
+ int gpio, offset;
+ unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
+
+ for (gpio = 0; gpio < cg->chip.ngpio; gpio++) {
+ regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
+ regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
+ regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
+ &mirqs0);
+ regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX,
+ &mirqsx);
+ regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ,
+ &irq);
+
+ offset = gpio % 8;
+ seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
+ gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
+ ctli & 0x1 ? "hi" : "lo",
+ ctli & CTLI_INTCNT_NE ? "fall" : " ",
+ ctli & CTLI_INTCNT_PE ? "rise" : " ",
+ ctlo,
+ mirqs0 & BIT(offset) ? "s0 mask " : "s0 unmask",
+ mirqsx & BIT(offset) ? "sx mask " : "sx unmask",
+ irq & BIT(offset) ? "pending" : " ");
+ }
+}
+
+static int crystalcove_gpio_probe(struct platform_device *pdev)
+{
+ int irq = platform_get_irq(pdev, 0);
+ struct crystalcove_gpio *cg;
+ int retval;
+ struct device *dev = pdev->dev.parent;
+ struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
+
+ if (irq < 0)
+ return irq;
+
+ cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
+ if (!cg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, cg);
+
+ mutex_init(&cg->buslock);
+ cg->chip.label = KBUILD_MODNAME;
+ cg->chip.direction_input = crystalcove_gpio_dir_in;
+ cg->chip.direction_output = crystalcove_gpio_dir_out;
+ cg->chip.get = crystalcove_gpio_get;
+ cg->chip.set = crystalcove_gpio_set;
+ cg->chip.base = -1;
+ cg->chip.ngpio = CRYSTALCOVE_GPIO_NUM;
+ cg->chip.can_sleep = true;
+ cg->chip.dev = dev;
+ cg->chip.dbg_show = crystalcove_gpio_dbg_show;
+ cg->regmap = pmic->regmap;
+
+ retval = gpiochip_add(&cg->chip);
+ if (retval) {
+ dev_warn(&pdev->dev, "add gpio chip error: %d\n", retval);
+ return retval;
+ }
+
+ gpiochip_irqchip_add(&cg->chip, &crystalcove_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+
+ retval = request_threaded_irq(irq, NULL, crystalcove_gpio_irq_handler,
+ IRQF_ONESHOT, KBUILD_MODNAME, cg);
+
+ if (retval) {
+ dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
+ goto out_remove_gpio;
+ }
+
+ return 0;
+
+out_remove_gpio:
+ WARN_ON(gpiochip_remove(&cg->chip));
+ return retval;
+}
+
+static int crystalcove_gpio_remove(struct platform_device *pdev)
+{
+ struct crystalcove_gpio *cg = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+ int err;
+
+ err = gpiochip_remove(&cg->chip);
+
+ if (irq >= 0)
+ free_irq(irq, cg);
+
+ return err;
+}
+
+static struct platform_driver crystalcove_gpio_driver = {
+ .probe = crystalcove_gpio_probe,
+ .remove = crystalcove_gpio_remove,
+ .driver = {
+ .name = "crystal_cove_gpio",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(crystalcove_gpio_driver);
+
+MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>");
+MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
+MODULE_LICENSE("GPL v2");