gpio: reorganize drivers

Sort the gpio makefile and enforce the naming convention gpio-*.c for
gpio drivers.

v2: cleaned up filenames in Kconfig and comment blocks
v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 0 insertions, 513 deletions

diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c
deleted file mode 100644
index 57635ac35a73..000000000000
--- a/drivers/gpio/twl4030-gpio.c
+++ /dev/null
@@ -1,513 +0,0 @@
-/*
- * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips
- *
- * Copyright (C) 2006-2007 Texas Instruments, Inc.
- * Copyright (C) 2006 MontaVista Software, Inc.
- *
- * Code re-arranged and cleaned up by:
- *	Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * Initial Code:
- *	Andy Lowe / Nishanth Menon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kthread.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/i2c/twl.h>
-
-
-/*
- * The GPIO "subchip" supports 18 GPIOs which can be configured as
- * inputs or outputs, with pullups or pulldowns on each pin.  Each
- * GPIO can trigger interrupts on either or both edges.
- *
- * GPIO interrupts can be fed to either of two IRQ lines; this is
- * intended to support multiple hosts.
- *
- * There are also two LED pins used sometimes as output-only GPIOs.
- */
-
-
-static struct gpio_chip twl_gpiochip;
-static int twl4030_gpio_irq_base;
-
-/* genirq interfaces are not available to modules */
-#ifdef MODULE
-#define is_module()	true
-#else
-#define is_module()	false
-#endif
-
-/* GPIO_CTRL Fields */
-#define MASK_GPIO_CTRL_GPIO0CD1		BIT(0)
-#define MASK_GPIO_CTRL_GPIO1CD2		BIT(1)
-#define MASK_GPIO_CTRL_GPIO_ON		BIT(2)
-
-/* Mask for GPIO registers when aggregated into a 32-bit integer */
-#define GPIO_32_MASK			0x0003ffff
-
-/* Data structures */
-static DEFINE_MUTEX(gpio_lock);
-
-/* store usage of each GPIO. - each bit represents one GPIO */
-static unsigned int gpio_usage_count;
-
-/*----------------------------------------------------------------------*/
-
-/*
- * To configure TWL4030 GPIO module registers
- */
-static inline int gpio_twl4030_write(u8 address, u8 data)
-{
-	return twl_i2c_write_u8(TWL4030_MODULE_GPIO, data, address);
-}
-
-/*----------------------------------------------------------------------*/
-
-/*
- * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB}))
- * PWMs A and B are dedicated to LEDs A and B, respectively.
- */
-
-#define TWL4030_LED_LEDEN	0x0
-
-/* LEDEN bits */
-#define LEDEN_LEDAON		BIT(0)
-#define LEDEN_LEDBON		BIT(1)
-#define LEDEN_LEDAEXT		BIT(2)
-#define LEDEN_LEDBEXT		BIT(3)
-#define LEDEN_LEDAPWM		BIT(4)
-#define LEDEN_LEDBPWM		BIT(5)
-#define LEDEN_PWM_LENGTHA	BIT(6)
-#define LEDEN_PWM_LENGTHB	BIT(7)
-
-#define TWL4030_PWMx_PWMxON	0x0
-#define TWL4030_PWMx_PWMxOFF	0x1
-
-#define PWMxON_LENGTH		BIT(7)
-
-/*----------------------------------------------------------------------*/
-
-/*
- * To read a TWL4030 GPIO module register
- */
-static inline int gpio_twl4030_read(u8 address)
-{
-	u8 data;
-	int ret = 0;
-
-	ret = twl_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address);
-	return (ret < 0) ? ret : data;
-}
-
-/*----------------------------------------------------------------------*/
-
-static u8 cached_leden;		/* protected by gpio_lock */
-
-/* The LED lines are open drain outputs ... a FET pulls to GND, so an
- * external pullup is needed.  We could also expose the integrated PWM
- * as a LED brightness control; we initialize it as "always on".
- */
-static void twl4030_led_set_value(int led, int value)
-{
-	u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM;
-	int status;
-
-	if (led)
-		mask <<= 1;
-
-	mutex_lock(&gpio_lock);
-	if (value)
-		cached_leden &= ~mask;
-	else
-		cached_leden |= mask;
-	status = twl_i2c_write_u8(TWL4030_MODULE_LED, cached_leden,
-			TWL4030_LED_LEDEN);
-	mutex_unlock(&gpio_lock);
-}
-
-static int twl4030_set_gpio_direction(int gpio, int is_input)
-{
-	u8 d_bnk = gpio >> 3;
-	u8 d_msk = BIT(gpio & 0x7);
-	u8 reg = 0;
-	u8 base = REG_GPIODATADIR1 + d_bnk;
-	int ret = 0;
-
-	mutex_lock(&gpio_lock);
-	ret = gpio_twl4030_read(base);
-	if (ret >= 0) {
-		if (is_input)
-			reg = ret & ~d_msk;
-		else
-			reg = ret | d_msk;
-
-		ret = gpio_twl4030_write(base, reg);
-	}
-	mutex_unlock(&gpio_lock);
-	return ret;
-}
-
-static int twl4030_set_gpio_dataout(int gpio, int enable)
-{
-	u8 d_bnk = gpio >> 3;
-	u8 d_msk = BIT(gpio & 0x7);
-	u8 base = 0;
-
-	if (enable)
-		base = REG_SETGPIODATAOUT1 + d_bnk;
-	else
-		base = REG_CLEARGPIODATAOUT1 + d_bnk;
-
-	return gpio_twl4030_write(base, d_msk);
-}
-
-static int twl4030_get_gpio_datain(int gpio)
-{
-	u8 d_bnk = gpio >> 3;
-	u8 d_off = gpio & 0x7;
-	u8 base = 0;
-	int ret = 0;
-
-	if (unlikely((gpio >= TWL4030_GPIO_MAX)
-		|| !(gpio_usage_count & BIT(gpio))))
-		return -EPERM;
-
-	base = REG_GPIODATAIN1 + d_bnk;
-	ret = gpio_twl4030_read(base);
-	if (ret > 0)
-		ret = (ret >> d_off) & 0x1;
-
-	return ret;
-}
-
-/*----------------------------------------------------------------------*/
-
-static int twl_request(struct gpio_chip *chip, unsigned offset)
-{
-	int status = 0;
-
-	mutex_lock(&gpio_lock);
-
-	/* Support the two LED outputs as output-only GPIOs. */
-	if (offset >= TWL4030_GPIO_MAX) {
-		u8	ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT
-				| LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA;
-		u8	module = TWL4030_MODULE_PWMA;
-
-		offset -= TWL4030_GPIO_MAX;
-		if (offset) {
-			ledclr_mask <<= 1;
-			module = TWL4030_MODULE_PWMB;
-		}
-
-		/* initialize PWM to always-drive */
-		status = twl_i2c_write_u8(module, 0x7f,
-				TWL4030_PWMx_PWMxOFF);
-		if (status < 0)
-			goto done;
-		status = twl_i2c_write_u8(module, 0x7f,
-				TWL4030_PWMx_PWMxON);
-		if (status < 0)
-			goto done;
-
-		/* init LED to not-driven (high) */
-		module = TWL4030_MODULE_LED;
-		status = twl_i2c_read_u8(module, &cached_leden,
-				TWL4030_LED_LEDEN);
-		if (status < 0)
-			goto done;
-		cached_leden &= ~ledclr_mask;
-		status = twl_i2c_write_u8(module, cached_leden,
-				TWL4030_LED_LEDEN);
-		if (status < 0)
-			goto done;
-
-		status = 0;
-		goto done;
-	}
-
-	/* on first use, turn GPIO module "on" */
-	if (!gpio_usage_count) {
-		struct twl4030_gpio_platform_data *pdata;
-		u8 value = MASK_GPIO_CTRL_GPIO_ON;
-
-		/* optionally have the first two GPIOs switch vMMC1
-		 * and vMMC2 power supplies based on card presence.
-		 */
-		pdata = chip->dev->platform_data;
-		value |= pdata->mmc_cd & 0x03;
-
-		status = gpio_twl4030_write(REG_GPIO_CTRL, value);
-	}
-
-	if (!status)
-		gpio_usage_count |= (0x1 << offset);
-
-done:
-	mutex_unlock(&gpio_lock);
-	return status;
-}
-
-static void twl_free(struct gpio_chip *chip, unsigned offset)
-{
-	if (offset >= TWL4030_GPIO_MAX) {
-		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1);
-		return;
-	}
-
-	mutex_lock(&gpio_lock);
-
-	gpio_usage_count &= ~BIT(offset);
-
-	/* on last use, switch off GPIO module */
-	if (!gpio_usage_count)
-		gpio_twl4030_write(REG_GPIO_CTRL, 0x0);
-
-	mutex_unlock(&gpio_lock);
-}
-
-static int twl_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	return (offset < TWL4030_GPIO_MAX)
-		? twl4030_set_gpio_direction(offset, 1)
-		: -EINVAL;
-}
-
-static int twl_get(struct gpio_chip *chip, unsigned offset)
-{
-	int status = 0;
-
-	if (offset < TWL4030_GPIO_MAX)
-		status = twl4030_get_gpio_datain(offset);
-	else if (offset == TWL4030_GPIO_MAX)
-		status = cached_leden & LEDEN_LEDAON;
-	else
-		status = cached_leden & LEDEN_LEDBON;
-	return (status < 0) ? 0 : status;
-}
-
-static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (offset < TWL4030_GPIO_MAX) {
-		twl4030_set_gpio_dataout(offset, value);
-		return twl4030_set_gpio_direction(offset, 0);
-	} else {
-		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
-		return 0;
-	}
-}
-
-static void twl_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (offset < TWL4030_GPIO_MAX)
-		twl4030_set_gpio_dataout(offset, value);
-	else
-		twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value);
-}
-
-static int twl_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX))
-		? (twl4030_gpio_irq_base + offset)
-		: -EINVAL;
-}
-
-static struct gpio_chip twl_gpiochip = {
-	.label			= "twl4030",
-	.owner			= THIS_MODULE,
-	.request		= twl_request,
-	.free			= twl_free,
-	.direction_input	= twl_direction_in,
-	.get			= twl_get,
-	.direction_output	= twl_direction_out,
-	.set			= twl_set,
-	.to_irq			= twl_to_irq,
-	.can_sleep		= 1,
-};
-
-/*----------------------------------------------------------------------*/
-
-static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs)
-{
-	u8		message[6];
-	unsigned	i, gpio_bit;
-
-	/* For most pins, a pulldown was enabled by default.
-	 * We should have data that's specific to this board.
-	 */
-	for (gpio_bit = 1, i = 1; i < 6; i++) {
-		u8		bit_mask;
-		unsigned	j;
-
-		for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) {
-			if (ups & gpio_bit)
-				bit_mask |= 1 << (j + 1);
-			else if (downs & gpio_bit)
-				bit_mask |= 1 << (j + 0);
-		}
-		message[i] = bit_mask;
-	}
-
-	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
-				REG_GPIOPUPDCTR1, 5);
-}
-
-static int __devinit gpio_twl4030_debounce(u32 debounce, u8 mmc_cd)
-{
-	u8		message[4];
-
-	/* 30 msec of debouncing is always used for MMC card detect,
-	 * and is optional for everything else.
-	 */
-	message[1] = (debounce & 0xff) | (mmc_cd & 0x03);
-	debounce >>= 8;
-	message[2] = (debounce & 0xff);
-	debounce >>= 8;
-	message[3] = (debounce & 0x03);
-
-	return twl_i2c_write(TWL4030_MODULE_GPIO, message,
-				REG_GPIO_DEBEN1, 3);
-}
-
-static int gpio_twl4030_remove(struct platform_device *pdev);
-
-static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
-{
-	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
-	int ret;
-
-	/* maybe setup IRQs */
-	if (pdata->irq_base) {
-		if (is_module()) {
-			dev_err(&pdev->dev,
-				"can't dispatch IRQs from modules\n");
-			goto no_irqs;
-		}
-		ret = twl4030_sih_setup(TWL4030_MODULE_GPIO);
-		if (ret < 0)
-			return ret;
-		WARN_ON(ret != pdata->irq_base);
-		twl4030_gpio_irq_base = ret;
-	}
-
-no_irqs:
-	/*
-	 * NOTE:  boards may waste power if they don't set pullups
-	 * and pulldowns correctly ... default for non-ULPI pins is
-	 * pulldown, and some other pins may have external pullups
-	 * or pulldowns.  Careful!
-	 */
-	ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns);
-	if (ret)
-		dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n",
-				pdata->pullups, pdata->pulldowns,
-				ret);
-
-	ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd);
-	if (ret)
-		dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n",
-				pdata->debounce, pdata->mmc_cd,
-				ret);
-
-	twl_gpiochip.base = pdata->gpio_base;
-	twl_gpiochip.ngpio = TWL4030_GPIO_MAX;
-	twl_gpiochip.dev = &pdev->dev;
-
-	/* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE,
-	 * is (still) clear if use_leds is set.
-	 */
-	if (pdata->use_leds)
-		twl_gpiochip.ngpio += 2;
-
-	ret = gpiochip_add(&twl_gpiochip);
-	if (ret < 0) {
-		dev_err(&pdev->dev,
-				"could not register gpiochip, %d\n",
-				ret);
-		twl_gpiochip.ngpio = 0;
-		gpio_twl4030_remove(pdev);
-	} else if (pdata->setup) {
-		int status;
-
-		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
-		if (status)
-			dev_dbg(&pdev->dev, "setup --> %d\n", status);
-	}
-
-	return ret;
-}
-
-/* Cannot use __devexit as gpio_twl4030_probe() calls us */
-static int gpio_twl4030_remove(struct platform_device *pdev)
-{
-	struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
-	int status;
-
-	if (pdata->teardown) {
-		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
-		if (status) {
-			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
-			return status;
-		}
-	}
-
-	status = gpiochip_remove(&twl_gpiochip);
-	if (status < 0)
-		return status;
-
-	if (is_module())
-		return 0;
-
-	/* REVISIT no support yet for deregistering all the IRQs */
-	WARN_ON(1);
-	return -EIO;
-}
-
-/* Note:  this hardware lives inside an I2C-based multi-function device. */
-MODULE_ALIAS("platform:twl4030_gpio");
-
-static struct platform_driver gpio_twl4030_driver = {
-	.driver.name	= "twl4030_gpio",
-	.driver.owner	= THIS_MODULE,
-	.probe		= gpio_twl4030_probe,
-	.remove		= gpio_twl4030_remove,
-};
-
-static int __init gpio_twl4030_init(void)
-{
-	return platform_driver_register(&gpio_twl4030_driver);
-}
-subsys_initcall(gpio_twl4030_init);
-
-static void __exit gpio_twl4030_exit(void)
-{
-	platform_driver_unregister(&gpio_twl4030_driver);
-}
-module_exit(gpio_twl4030_exit);
-
-MODULE_AUTHOR("Texas Instruments, Inc.");
-MODULE_DESCRIPTION("GPIO interface for TWL4030");
-MODULE_LICENSE("GPL");