summaryrefslogtreecommitdiff
path: root/drivers/clocksource
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
commit1ead65812486cda65093683a99b8907a7242fa93 (patch)
tree094684870815537aae4aedb69c10d669ba29f0af /drivers/clocksource
parentb6d739e9581272f0bbbd6edd15340fb8e108df96 (diff)
parentb97f0291a2504291aef850077f98cab68a5a2f33 (diff)
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
Diffstat (limited to 'drivers/clocksource')
-rw-r--r--drivers/clocksource/Kconfig48
-rw-r--r--drivers/clocksource/Makefile2
-rw-r--r--drivers/clocksource/arm_arch_timer.c1
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c121
-rw-r--r--drivers/clocksource/exynos_mct.c2
-rw-r--r--drivers/clocksource/sun4i_timer.c2
-rw-r--r--drivers/clocksource/time-armada-370-xp.c12
-rw-r--r--drivers/clocksource/time-orion.c28
-rw-r--r--drivers/clocksource/timer-keystone.c241
-rw-r--r--drivers/clocksource/timer-u300.c447
10 files changed, 841 insertions, 63 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cd6950fd8caf..52e9329e3c51 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,51 @@ config VF_PIT_TIMER
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config SYS_SUPPORTS_SH_CMT
+ bool
+
+config SYS_SUPPORTS_SH_MTU2
+ bool
+
+config SYS_SUPPORTS_SH_TMU
+ bool
+
+config SYS_SUPPORTS_EM_STI
+ bool
+
+config SH_TIMER_CMT
+ bool "Renesas CMT timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_CMT
+ help
+ This enables build of a clocksource and clockevent driver for
+ the Compare Match Timer (CMT) hardware available in 16/32/48-bit
+ variants on a wide range of Mobile and Automotive SoCs from Renesas.
+
+config SH_TIMER_MTU2
+ bool "Renesas MTU2 timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_MTU2
+ help
+ This enables build of a clockevent driver for the Multi-Function
+ Timer Pulse Unit 2 (TMU2) hardware available on SoCs from Renesas.
+ This hardware comes with 16 bit-timer registers.
+
+config SH_TIMER_TMU
+ bool "Renesas TMU timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_SH_TMU
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 32-bit Timer Unit (TMU) hardware available on a wide range
+ SoCs from Renesas.
+
+config EM_TIMER_STI
+ bool "Renesas STI timer driver" if COMPILE_TEST
+ depends on GENERIC_CLOCKEVENTS
+ default SYS_SUPPORTS_EM_STI
+ help
+ This enables build of a clocksource and clockevent driver for
+ the 48-bit System Timer (STI) hardware available on a SoCs
+ such as EMEV2 from former NEC Electronics.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a9c232..aed3488d9426 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
+obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
@@ -37,3 +38,4 @@ obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
+obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 95fb944e15ee..57e823c44d2a 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -277,6 +277,7 @@ static void __arch_timer_setup(unsigned type,
clk->set_next_event = arch_timer_set_next_event_phys;
}
} else {
+ clk->features |= CLOCK_EVT_FEAT_DYNIRQ;
clk->name = "arch_mem_timer";
clk->rating = 400;
clk->cpumask = cpu_all_mask;
diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 63f176de0d02..49fbe2847c84 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -16,6 +16,7 @@
*/
#include <linux/clk.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
@@ -52,6 +53,8 @@
#define TTC_CNT_CNTRL_DISABLE_MASK 0x1
#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */
+#define TTC_CLK_CNTRL_PSV_MASK 0x1e
+#define TTC_CLK_CNTRL_PSV_SHIFT 1
/*
* Setup the timers to use pre-scaling, using a fixed value for now that will
@@ -63,6 +66,8 @@
#define CLK_CNTRL_PRESCALE_EN 1
#define CNT_CNTRL_RESET (1 << 4)
+#define MAX_F_ERR 50
+
/**
* struct ttc_timer - This definition defines local timer structure
*
@@ -82,6 +87,8 @@ struct ttc_timer {
container_of(x, struct ttc_timer, clk_rate_change_nb)
struct ttc_timer_clocksource {
+ u32 scale_clk_ctrl_reg_old;
+ u32 scale_clk_ctrl_reg_new;
struct ttc_timer ttc;
struct clocksource cs;
};
@@ -229,32 +236,89 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
struct ttc_timer_clocksource, ttc);
switch (event) {
- case POST_RATE_CHANGE:
+ case PRE_RATE_CHANGE:
+ {
+ u32 psv;
+ unsigned long factor, rate_low, rate_high;
+
+ if (ndata->new_rate > ndata->old_rate) {
+ factor = DIV_ROUND_CLOSEST(ndata->new_rate,
+ ndata->old_rate);
+ rate_low = ndata->old_rate;
+ rate_high = ndata->new_rate;
+ } else {
+ factor = DIV_ROUND_CLOSEST(ndata->old_rate,
+ ndata->new_rate);
+ rate_low = ndata->new_rate;
+ rate_high = ndata->old_rate;
+ }
+
+ if (!is_power_of_2(factor))
+ return NOTIFY_BAD;
+
+ if (abs(rate_high - (factor * rate_low)) > MAX_F_ERR)
+ return NOTIFY_BAD;
+
+ factor = __ilog2_u32(factor);
+
/*
- * Do whatever is necessary to maintain a proper time base
- *
- * I cannot find a way to adjust the currently used clocksource
- * to the new frequency. __clocksource_updatefreq_hz() sounds
- * good, but does not work. Not sure what's that missing.
- *
- * This approach works, but triggers two clocksource switches.
- * The first after unregister to clocksource jiffies. And
- * another one after the register to the newly registered timer.
- *
- * Alternatively we could 'waste' another HW timer to ping pong
- * between clock sources. That would also use one register and
- * one unregister call, but only trigger one clocksource switch
- * for the cost of another HW timer used by the OS.
+ * store timer clock ctrl register so we can restore it in case
+ * of an abort.
*/
- clocksource_unregister(&ttccs->cs);
- clocksource_register_hz(&ttccs->cs,
- ndata->new_rate / PRESCALE);
- /* fall through */
- case PRE_RATE_CHANGE:
+ ttccs->scale_clk_ctrl_reg_old =
+ __raw_readl(ttccs->ttc.base_addr +
+ TTC_CLK_CNTRL_OFFSET);
+
+ psv = (ttccs->scale_clk_ctrl_reg_old &
+ TTC_CLK_CNTRL_PSV_MASK) >>
+ TTC_CLK_CNTRL_PSV_SHIFT;
+ if (ndata->new_rate < ndata->old_rate)
+ psv -= factor;
+ else
+ psv += factor;
+
+ /* prescaler within legal range? */
+ if (psv & ~(TTC_CLK_CNTRL_PSV_MASK >> TTC_CLK_CNTRL_PSV_SHIFT))
+ return NOTIFY_BAD;
+
+ ttccs->scale_clk_ctrl_reg_new = ttccs->scale_clk_ctrl_reg_old &
+ ~TTC_CLK_CNTRL_PSV_MASK;
+ ttccs->scale_clk_ctrl_reg_new |= psv << TTC_CLK_CNTRL_PSV_SHIFT;
+
+
+ /* scale down: adjust divider in post-change notification */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_DONE;
+
+ /* scale up: adjust divider now - before frequency change */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+ }
+ case POST_RATE_CHANGE:
+ /* scale up: pre-change notification did the adjustment */
+ if (ndata->new_rate > ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* scale down: adjust divider now - after frequency change */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_new,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ break;
+
case ABORT_RATE_CHANGE:
+ /* we have to undo the adjustment in case we scale up */
+ if (ndata->new_rate < ndata->old_rate)
+ return NOTIFY_OK;
+
+ /* restore original register value */
+ __raw_writel(ttccs->scale_clk_ctrl_reg_old,
+ ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET);
+ /* fall through */
default:
return NOTIFY_DONE;
}
+
+ return NOTIFY_DONE;
}
static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
@@ -321,25 +385,12 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
switch (event) {
case POST_RATE_CHANGE:
- {
- unsigned long flags;
-
- /*
- * clockevents_update_freq should be called with IRQ disabled on
- * the CPU the timer provides events for. The timer we use is
- * common to both CPUs, not sure if we need to run on both
- * cores.
- */
- local_irq_save(flags);
- clockevents_update_freq(&ttcce->ce,
- ndata->new_rate / PRESCALE);
- local_irq_restore(flags);
-
/* update cached frequency */
ttc->freq = ndata->new_rate;
+ clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE);
+
/* fall through */
- }
case PRE_RATE_CHANGE:
case ABORT_RATE_CHANGE:
default:
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index 48f76bc05da0..c2e390efbdca 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -410,7 +410,7 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt)
mevt = container_of(evt, struct mct_clock_event_device, evt);
mevt->base = EXYNOS4_MCT_L_BASE(cpu);
- sprintf(mevt->name, "mct_tick%d", cpu);
+ snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
evt->name = mevt->name;
evt->cpumask = cpumask_of(cpu);
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index bf497afba9ad..efb17c3ee120 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -196,5 +196,5 @@ static void __init sun4i_timer_init(struct device_node *node)
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
}
-CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
+CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
sun4i_timer_init);
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index ee8691b89944..0451e62fac7a 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -85,12 +85,6 @@ static u32 ticks_per_jiffy;
static struct clock_event_device __percpu *armada_370_xp_evt;
-static void timer_ctrl_clrset(u32 clr, u32 set)
-{
- writel((readl(timer_base + TIMER_CTRL_OFF) & ~clr) | set,
- timer_base + TIMER_CTRL_OFF);
-}
-
static void local_timer_ctrl_clrset(u32 clr, u32 set)
{
writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set,
@@ -245,7 +239,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
clr = TIMER0_25MHZ;
enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT);
}
- timer_ctrl_clrset(clr, set);
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set);
local_timer_ctrl_clrset(clr, set);
/*
@@ -263,7 +257,9 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
- timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask);
+ atomic_io_modify(timer_base + TIMER_CTRL_OFF,
+ TIMER0_RELOAD_EN | enable_mask,
+ TIMER0_RELOAD_EN | enable_mask);
/*
* Set scale and timer for sched_clock.
diff --git a/drivers/clocksource/time-orion.c b/drivers/clocksource/time-orion.c
index 20066222f3f2..0b3ce0399c51 100644
--- a/drivers/clocksource/time-orion.c
+++ b/drivers/clocksource/time-orion.c
@@ -35,20 +35,6 @@
#define ORION_ONESHOT_MAX 0xfffffffe
static void __iomem *timer_base;
-static DEFINE_SPINLOCK(timer_ctrl_lock);
-
-/*
- * Thread-safe access to TIMER_CTRL register
- * (shared with watchdog timer)
- */
-void orion_timer_ctrl_clrset(u32 clr, u32 set)
-{
- spin_lock(&timer_ctrl_lock);
- writel((readl(timer_base + TIMER_CTRL) & ~clr) | set,
- timer_base + TIMER_CTRL);
- spin_unlock(&timer_ctrl_lock);
-}
-EXPORT_SYMBOL(orion_timer_ctrl_clrset);
/*
* Free-running clocksource handling.
@@ -68,7 +54,8 @@ static int orion_clkevt_next_event(unsigned long delta,
{
/* setup and enable one-shot timer */
writel(delta, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN, TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, TIMER1_EN);
return 0;
}
@@ -80,10 +67,13 @@ static void orion_clkevt_mode(enum clock_event_mode mode,
/* setup and enable periodic timer at 1/HZ intervals */
writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD);
writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL);
- orion_timer_ctrl_clrset(0, TIMER1_RELOAD_EN | TIMER1_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN,
+ TIMER1_RELOAD_EN | TIMER1_EN);
} else {
/* disable timer */
- orion_timer_ctrl_clrset(TIMER1_RELOAD_EN | TIMER1_EN, 0);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER1_RELOAD_EN | TIMER1_EN, 0);
}
}
@@ -131,7 +121,9 @@ static void __init orion_timer_init(struct device_node *np)
/* setup timer0 as free-running clocksource */
writel(~0, timer_base + TIMER0_VAL);
writel(~0, timer_base + TIMER0_RELOAD);
- orion_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | TIMER0_EN);
+ atomic_io_modify(timer_base + TIMER_CTRL,
+ TIMER0_RELOAD_EN | TIMER0_EN,
+ TIMER0_RELOAD_EN | TIMER0_EN);
clocksource_mmio_init(timer_base + TIMER0_VAL, "orion_clocksource",
clk_get_rate(clk), 300, 32,
clocksource_mmio_readl_down);
diff --git a/drivers/clocksource/timer-keystone.c b/drivers/clocksource/timer-keystone.c
new file mode 100644
index 000000000000..0250354f7e55
--- /dev/null
+++ b/drivers/clocksource/timer-keystone.c
@@ -0,0 +1,241 @@
+/*
+ * Keystone broadcast clock-event
+ *
+ * Copyright 2013 Texas Instruments, Inc.
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define TIMER_NAME "timer-keystone"
+
+/* Timer register offsets */
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define INTCTLSTAT 0x44
+
+/* Timer register bitfields */
+#define TCR_ENAMODE_MASK 0xC0
+#define TCR_ENAMODE_ONESHOT_MASK 0x40
+#define TCR_ENAMODE_PERIODIC_MASK 0x80
+
+#define TGCR_TIM_UNRESET_MASK 0x03
+#define INTCTLSTAT_ENINT_MASK 0x01
+
+/**
+ * struct keystone_timer: holds timer's data
+ * @base: timer memory base address
+ * @hz_period: cycles per HZ period
+ * @event_dev: event device based on timer
+ */
+static struct keystone_timer {
+ void __iomem *base;
+ unsigned long hz_period;
+ struct clock_event_device event_dev;
+} timer;
+
+static inline u32 keystone_timer_readl(unsigned long rg)
+{
+ return readl_relaxed(timer.base + rg);
+}
+
+static inline void keystone_timer_writel(u32 val, unsigned long rg)
+{
+ writel_relaxed(val, timer.base + rg);
+}
+
+/**
+ * keystone_timer_barrier: write memory barrier
+ * use explicit barrier to avoid using readl/writel non relaxed function
+ * variants, because in our case non relaxed variants hide the true places
+ * where barrier is needed.
+ */
+static inline void keystone_timer_barrier(void)
+{
+ __iowmb();
+}
+
+/**
+ * keystone_timer_config: configures timer to work in oneshot/periodic modes.
+ * @ mode: mode to configure
+ * @ period: cycles number to configure for
+ */
+static int keystone_timer_config(u64 period, enum clock_event_mode mode)
+{
+ u32 tcr;
+ u32 off;
+
+ tcr = keystone_timer_readl(TCR);
+ off = tcr & ~(TCR_ENAMODE_MASK);
+
+ /* set enable mode */
+ switch (mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ tcr |= TCR_ENAMODE_ONESHOT_MASK;
+ break;
+ case CLOCK_EVT_MODE_PERIODIC:
+ tcr |= TCR_ENAMODE_PERIODIC_MASK;
+ break;
+ default:
+ return -1;
+ }
+
+ /* disable timer */
+ keystone_timer_writel(off, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset counter to zero, set new period */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+ keystone_timer_writel(period & 0xffffffff, PRD12);
+ keystone_timer_writel(period >> 32, PRD34);
+
+ /*
+ * enable timer
+ * here we have to be sure that CNTLO, CNTHI, PRDLO, PRDHI registers
+ * have been written.
+ */
+ keystone_timer_barrier();
+ keystone_timer_writel(tcr, TCR);
+ return 0;
+}
+
+static void keystone_timer_disable(void)
+{
+ u32 tcr;
+
+ tcr = keystone_timer_readl(TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK);
+ keystone_timer_writel(tcr, TCR);
+}
+
+static irqreturn_t keystone_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int keystone_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ return keystone_timer_config(cycles, evt->mode);
+}
+
+static void keystone_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ keystone_timer_config(timer.hz_period, CLOCK_EVT_MODE_PERIODIC);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_ONESHOT:
+ keystone_timer_disable();
+ break;
+ default:
+ break;
+ }
+}
+
+static void __init keystone_timer_init(struct device_node *np)
+{
+ struct clock_event_device *event_dev = &timer.event_dev;
+ unsigned long rate;
+ struct clk *clk;
+ int irq, error;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ pr_err("%s: failed to map interrupts\n", __func__);
+ return;
+ }
+
+ timer.base = of_iomap(np, 0);
+ if (!timer.base) {
+ pr_err("%s: failed to map registers\n", __func__);
+ return;
+ }
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to get clock\n", __func__);
+ iounmap(timer.base);
+ return;
+ }
+
+ error = clk_prepare_enable(clk);
+ if (error) {
+ pr_err("%s: failed to enable clock\n", __func__);
+ goto err;
+ }
+
+ rate = clk_get_rate(clk);
+
+ /* disable, use internal clock source */
+ keystone_timer_writel(0, TCR);
+ /* here we have to be sure the timer has been disabled */
+ keystone_timer_barrier();
+
+ /* reset timer as 64-bit, no pre-scaler, plus features are disabled */
+ keystone_timer_writel(0, TGCR);
+
+ /* unreset timer */
+ keystone_timer_writel(TGCR_TIM_UNRESET_MASK, TGCR);
+
+ /* init counter to zero */
+ keystone_timer_writel(0, TIM12);
+ keystone_timer_writel(0, TIM34);
+
+ timer.hz_period = DIV_ROUND_UP(rate, HZ);
+
+ /* enable timer interrupts */
+ keystone_timer_writel(INTCTLSTAT_ENINT_MASK, INTCTLSTAT);
+
+ error = request_irq(irq, keystone_timer_interrupt, IRQF_TIMER,
+ TIMER_NAME, event_dev);
+ if (error) {
+ pr_err("%s: failed to setup irq\n", __func__);
+ goto err;
+ }
+
+ /* setup clockevent */
+ event_dev->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ event_dev->set_next_event = keystone_set_next_event;
+ event_dev->set_mode = keystone_set_mode;
+ event_dev->cpumask = cpu_all_mask;
+ event_dev->owner = THIS_MODULE;
+ event_dev->name = TIMER_NAME;
+ event_dev->irq = irq;
+
+ clockevents_config_and_register(event_dev, rate, 1, ULONG_MAX);
+
+ pr_info("keystone timer clock @%lu Hz\n", rate);
+ return;
+err:
+ clk_put(clk);
+ iounmap(timer.base);
+}
+
+CLOCKSOURCE_OF_DECLARE(keystone_timer, "ti,keystone-timer",
+ keystone_timer_init);
diff --git a/drivers/clocksource/timer-u300.c b/drivers/clocksource/timer-u300.c
new file mode 100644
index 000000000000..e63d469661fd
--- /dev/null
+++ b/drivers/clocksource/timer-u300.c
@@ -0,0 +1,447 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Timer COH 901 328, runs the OS timer interrupt.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+/* Generic stuff */
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+/*
+ * APP side special timer registers
+ * This timer contains four timers which can fire an interrupt each.
+ * OS (operating system) timer @ 32768 Hz
+ * DD (device driver) timer @ 1 kHz
+ * GP1 (general purpose 1) timer @ 1MHz
+ * GP2 (general purpose 2) timer @ 1MHz
+ */
+
+/* Reset OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_ROST (0x0000)
+#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000)
+/* Enable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_EOST (0x0004)
+#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000)
+/* Disable OS Timer 32bit (-/W) */
+#define U300_TIMER_APP_DOST (0x0008)
+#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000)
+/* OS Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SOSTM (0x000c)
+#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001)
+/* OS Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTS (0x0010)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080)
+/* OS Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_OSTCC (0x0014)
+/* OS Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_OSTTC (0x0018)
+/* OS Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIE (0x001c)
+#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001)
+/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_OSTIA (0x0020)
+#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080)
+
+/* Reset DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_RDDT (0x0040)
+#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000)
+/* Enable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_EDDT (0x0044)
+#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000)
+/* Disable DD Timer 32bit (-/W) */
+#define U300_TIMER_APP_DDDT (0x0048)
+#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000)
+/* DD Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SDDTM (0x004c)
+#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001)
+/* DD Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTS (0x0050)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080)
+/* DD Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_DDTCC (0x0054)
+/* DD Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_DDTTC (0x0058)
+/* DD Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIE (0x005c)
+#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001)
+/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_DDTIA (0x0060)
+#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080)
+
+/* Reset GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT1 (0x0080)
+#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000)
+/* Enable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT1 (0x0084)
+#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000)
+/* Disable GP1 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT1 (0x0088)
+#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000)
+/* GP1 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT1M (0x008c)
+#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001)
+/* GP1 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1S (0x0090)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080)
+/* GP1 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT1CC (0x0094)
+/* GP1 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT1TC (0x0098)
+/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IE (0x009c)
+#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001)
+/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT1IA (0x00a0)
+#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080)
+
+/* Reset GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_RGPT2 (0x00c0)
+#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000)
+/* Enable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_EGPT2 (0x00c4)
+#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000)
+/* Disable GP2 Timer 32bit (-/W) */
+#define U300_TIMER_APP_DGPT2 (0x00c8)
+#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000)
+/* GP2 Timer Mode Register 32bit (-/W) */
+#define U300_TIMER_APP_SGPT2M (0x00cc)
+#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001)
+/* GP2 Timer Status Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2S (0x00d0)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001)
+#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002)
+#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010)
+#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020)
+#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000)
+#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020)
+#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040)
+#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080)
+/* GP2 Timer Current Count Register 32bit (R/-) */
+#define U300_TIMER_APP_GPT2CC (0x00d4)
+/* GP2 Timer Terminal Count Register 32bit (R/W) */
+#define U300_TIMER_APP_GPT2TC (0x00d8)
+/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IE (0x00dc)
+#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000)
+#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001)
+/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
+#define U300_TIMER_APP_GPT2IA (0x00e0)
+#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080)
+
+/* Clock request control register - all four timers */
+#define U300_TIMER_APP_CRC (0x100)
+#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
+
+static void __iomem *u300_timer_base;
+
+struct u300_clockevent_data {
+ struct clock_event_device cevd;
+ unsigned ticks_per_jiffy;
+};
+
+/*
+ * The u300_set_mode() function is always called first, if we
+ * have oneshot timer active, the oneshot scheduling function
+ * u300_set_next_event() is called immediately after.
+ */
+static void u300_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ struct u300_clockevent_data *cevdata =
+ container_of(evt, struct u300_clockevent_data, cevd);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ /*
+ * Set the periodic mode to a certain number of ticks per
+ * jiffy.
+ */
+ writel(cevdata->ticks_per_jiffy,
+ u300_timer_base + U300_TIMER_APP_GPT1TC);
+ /*
+ * Set continuous mode, so the timer keeps triggering
+ * interrupts.
+ */
+ writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
+ /* Enable timer interrupts */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Then enable the OS timer again */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Just break; here? */
+ /*
+ * The actual event will be programmed by the next event hook,
+ * so we just set a dummy value somewhere at the end of the
+ * universe here.
+ */
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ /*
+ * Expire far in the future, u300_set_next_event() will be
+ * called soon...
+ */
+ writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
+ /* We run one shot per tick here! */
+ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
+ /* Enable interrupts for this timer */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Enable timer */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT1);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ /* Disable interrupts on GP1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ /* Ignore this call */
+ break;
+ }
+}
+
+/*
+ * The app timer in one shot mode obviously has to be reprogrammed
+ * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
+ * the interrupt disable + timer disable commands with a reset command,
+ * it will fail miserably. Apparently (and I found this the hard way)
+ * the timer is very sensitive to the instruction order, though you don't
+ * get that impression from the data sheet.
+ */
+static int u300_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+
+{
+ /* Disable interrupts on GPT1 */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Disable GP1 while we're reprogramming it. */
+ writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DGPT1);
+ /* Reset the General Purpose timer 1. */
+ writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+ u300_timer_base + U300_TIMER_APP_RGPT1);
+ /* IRQ in n * cycles */
+ writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
+ /*
+ * We run one shot per tick here! (This is necessary to reconfigure,
+ * the timer will tilt if you don't!)
+ */
+ writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
+ u300_timer_base + U300_TIMER_APP_SGPT1M);
+ /* Enable timer interrupts */
+ writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
+ u300_timer_base + U300_TIMER_APP_GPT1IE);
+ /* Then enable the OS timer again */
+ writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT1);
+ return 0;
+}
+
+static struct u300_clockevent_data u300_clockevent_data = {
+ /* Use general purpose timer 1 as clock event */
+ .cevd = {
+ .name = "GPT1",
+ /* Reasonably fast and accurate clock event */
+ .rating = 300,
+ .features = CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = u300_set_next_event,
+ .set_mode = u300_set_mode,
+ },
+};
+
+/* Clock event timer interrupt handler */
+static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &u300_clockevent_data.cevd;
+ /* ACK/Clear timer IRQ for the APP GPT1 Timer */
+
+ writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
+ u300_timer_base + U300_TIMER_APP_GPT1IA);
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction u300_timer_irq = {
+ .name = "U300 Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = u300_timer_interrupt,
+};
+
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+
+static u64 notrace u300_read_sched_clock(void)
+{
+ return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
+}
+
+static unsigned long u300_read_current_timer(void)
+{
+ return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
+}
+
+static struct delay_timer u300_delay_timer;
+
+/*
+ * This sets up the system timers, clock source and clock event.
+ */
+static void __init u300_timer_init_of(struct device_node *np)
+{
+ unsigned int irq;
+ struct clk *clk;
+ unsigned long rate;
+
+ u300_timer_base = of_iomap(np, 0);
+ if (!u300_timer_base)
+ panic("could not ioremap system timer\n");
+
+ /* Get the IRQ for the GP1 timer */
+ irq = irq_of_parse_and_map(np, 2);
+ if (!irq)
+ panic("no IRQ for system timer\n");
+
+ pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
+
+ /* Clock the interrupt controller */
+ clk = of_clk_get(np, 0);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
+ u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
+
+ sched_clock_register(u300_read_sched_clock, 32, rate);
+
+ u300_delay_timer.read_current_timer = &u300_read_current_timer;
+ u300_delay_timer.freq = rate;
+ register_current_timer_delay(&u300_delay_timer);
+
+ /*
+ * Disable the "OS" and "DD" timers - these are designed for Symbian!
+ * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
+ */
+ writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
+ u300_timer_base + U300_TIMER_APP_CRC);
+ writel(U300_TIMER_APP_ROST_TIMER_RESET,
+ u300_timer_base + U300_TIMER_APP_ROST);
+ writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DOST);
+ writel(U300_TIMER_APP_RDDT_TIMER_RESET,
+ u300_timer_base + U300_TIMER_APP_RDDT);
+ writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
+ u300_timer_base + U300_TIMER_APP_DDDT);
+
+ /* Reset the General Purpose timer 1. */
+ writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
+ u300_timer_base + U300_TIMER_APP_RGPT1);
+
+ /* Set up the IRQ handler */
+ setup_irq(irq, &u300_timer_irq);
+
+ /* Reset the General Purpose timer 2 */
+ writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
+ u300_timer_base + U300_TIMER_APP_RGPT2);
+ /* Set this timer to run around forever */
+ writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
+ /* Set continuous mode so it wraps around */
+ writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
+ u300_timer_base + U300_TIMER_APP_SGPT2M);
+ /* Disable timer interrupts */
+ writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
+ u300_timer_base + U300_TIMER_APP_GPT2IE);
+ /* Then enable the GP2 timer to use as a free running us counter */
+ writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
+ u300_timer_base + U300_TIMER_APP_EGPT2);
+
+ /* Use general purpose timer 2 as clock source */
+ if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
+ "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
+ pr_err("timer: failed to initialize U300 clock source\n");
+
+ /* Configure and register the clockevent */
+ clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
+ 1, 0xffffffff);
+
+ /*
+ * TODO: init and register the rest of the timers too, they can be
+ * used by hrtimers!
+ */
+}
+
+CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
+ u300_timer_init_of);