summaryrefslogtreecommitdiff
path: root/drivers/ata
diff options
context:
space:
mode:
authorAlan <alan@lxorguk.ukuu.org.uk>2007-02-20 18:01:59 +0000
committerJeff Garzik <jeff@garzik.org>2007-02-25 15:41:40 -0500
commit10305f0f8e642590c69674d08bd22accef610aed (patch)
tree81caa503dd092150229f63efbb2f59ad924a8bc7 /drivers/ata
parent098cdff3d40286f87062c17cd07e98ca7ad94184 (diff)
Add id_to_dma_mode function for printing DMA modes
Also export dev_disable as this is needed by drivers doing slave decode filtering, which will follow shortly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/libata-core.c44
1 files changed, 44 insertions, 0 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d3b4e25074c1..9825a90d4169 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -824,6 +824,48 @@ static u64 ata_id_n_sectors(const u16 *id)
}
/**
+ * ata_id_to_dma_mode - Identify DMA mode from id block
+ * @dev: device to identify
+ * @mode: mode to assume if we cannot tell
+ *
+ * Set up the timing values for the device based upon the identify
+ * reported values for the DMA mode. This function is used by drivers
+ * which rely upon firmware configured modes, but wish to report the
+ * mode correctly when possible.
+ *
+ * In addition we emit similarly formatted messages to the default
+ * ata_dev_set_mode handler, in order to provide consistency of
+ * presentation.
+ */
+
+void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown)
+{
+ unsigned int mask;
+ u8 mode;
+
+ /* Pack the DMA modes */
+ mask = ((dev->id[63] >> 8) << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA;
+ if (dev->id[53] & 0x04)
+ mask |= ((dev->id[88] >> 8) << ATA_SHIFT_UDMA) & ATA_MASK_UDMA;
+
+ /* Select the mode in use */
+ mode = ata_xfer_mask2mode(mask);
+
+ if (mode != 0) {
+ ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
+ ata_mode_string(mask));
+ } else {
+ /* SWDMA perhaps ? */
+ mode = unknown;
+ ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+ }
+
+ /* Configure the device reporting */
+ dev->xfer_mode = mode;
+ dev->xfer_shift = ata_xfer_mode2shift(mode);
+}
+
+/**
* ata_noop_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
@@ -6276,6 +6318,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_port_probe);
+EXPORT_SYMBOL_GPL(ata_dev_disable);
EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_phy_debounce);
EXPORT_SYMBOL_GPL(sata_phy_resume);
@@ -6310,6 +6353,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
EXPORT_SYMBOL_GPL(ata_device_blacklisted);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);