Merge tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial patches from Greg Kroah-Hartman:
 "Here's the big tty/serial driver patches for 3.9-rc1.

  More tty port rework and fixes from Jiri here, as well as lots of
  individual serial driver updates and fixes.

  All of these have been in the linux-next tree for a while."

* tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: mxser: improve error handling in mxser_probe() and mxser_module_init()
  serial: imx: fix uninitialized variable warning
  serial: tegra: assume CONFIG_OF
  TTY: do not update atime/mtime on read/write
  lguest: select CONFIG_TTY to build properly.
  ARM defconfigs: add missing inclusions of linux/platform_device.h
  fb/exynos: include platform_device.h
  ARM: sa1100/assabet: include platform_device.h directly
  serial: imx: Fix recursive locking bug
  pps: Fix build breakage from decoupling pps from tty
  tty: Remove ancient hardpps()
  pps: Additional cleanups in uart_handle_dcd_change
  pps: Move timestamp read into PPS code proper
  pps: Don't crash the machine when exiting will do
  pps: Fix a use-after free bug when unregistering a source.
  pps: Use pps_lookup_dev to reduce ldisc coupling
  pps: Add pps_lookup_dev() function
  tty: serial: uartlite: Support uartlite on big and little endian systems
  tty: serial: uartlite: Fix sparse and checkpatch warnings
  serial/arc-uart: Miscll DT related updates (Grant's review comments)
  ...

Fix up trivial conflicts, mostly just due to the TTY config option
clashing with the EXPERIMENTAL removal.

24 files changed, 169 insertions, 84 deletions

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 775361f67bfd..dabc93649495 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -124,6 +124,7 @@ choice
 
 config ALPHA_GENERIC
 	bool "Generic"
+	depends on TTY
 	help
 	  A generic kernel will run on all supported Alpha hardware.
 
@@ -490,6 +491,7 @@ config VGA_HOSE
 
 config ALPHA_SRM
 	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	depends on TTY
 	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
 	---help---
 	  There are two different types of booting firmware on Alphas: SRM,
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 59b7bbad8394..6f01d9ad7b81 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -44,7 +44,7 @@ typedef union _srmcons_result {
 
 /* called with callback_lock held */
 static int
-srmcons_do_receive_chars(struct tty_struct *tty)
+srmcons_do_receive_chars(struct tty_port *port)
 {
 	srmcons_result result;
 	int count = 0, loops = 0;
@@ -52,13 +52,13 @@ srmcons_do_receive_chars(struct tty_struct *tty)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(tty, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (char)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(tty);
+		tty_schedule_flip(port);
 
 	return count;
 }
@@ -73,7 +73,7 @@ srmcons_receive_chars(unsigned long data)
 
 	local_irq_save(flags);
 	if (spin_trylock(&srmcons_callback_lock)) {
-		if (!srmcons_do_receive_chars(port->tty))
+		if (!srmcons_do_receive_chars(port))
 			incr = 100;
 		spin_unlock(&srmcons_callback_lock);
 	} 
@@ -88,7 +88,7 @@ srmcons_receive_chars(unsigned long data)
 
 /* called with callback_lock held */
 static int
-srmcons_do_write(struct tty_struct *tty, const char *buf, int count)
+srmcons_do_write(struct tty_port *port, const char *buf, int count)
 {
 	static char str_cr[1] = "\r";
 	long c, remaining = count;
@@ -113,10 +113,10 @@ srmcons_do_write(struct tty_struct *tty, const char *buf, int count)
 			cur += result.bits.c;
 
 			/*
-			 * Check for pending input iff a tty was provided
+			 * Check for pending input iff a tty port was provided
 			 */
-			if (tty)
-				srmcons_do_receive_chars(tty);
+			if (port)
+				srmcons_do_receive_chars(port);
 		}
 
 		while (need_cr) {
@@ -135,7 +135,7 @@ srmcons_write(struct tty_struct *tty,
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty, (const char *) buf, count);
+	srmcons_do_write(tty->port, (const char *) buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index d8645e990b21..cf31ced46602 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -45,6 +45,38 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
 			};
 		};
 
@@ -83,28 +115,28 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart@d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart@d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index 330f833ac3b0..e74a1c0fb9a2 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -59,6 +59,54 @@
 					compatible = "fixed-clock";
 					clock-frequency = <24000000>;
 				};
+
+				clkuart0: uart0 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
+				clkuart2: uart2 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <3>;
+				};
+
+				clkuart3: uart3 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <4>;
+				};
+
+				clkuart4: uart4 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <22>;
+				};
+
+				clkuart5: uart5 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <23>;
+				};
 			};
 		};
 
@@ -96,42 +144,42 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		uart@d8210000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8210000 0x1040>;
 			interrupts = <47>;
-			clocks = <&ref24>;
+			clocks = <&clkuart2>;
 		};
 
 		uart@d82c0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82c0000 0x1040>;
 			interrupts = <50>;
-			clocks = <&ref24>;
+			clocks = <&clkuart3>;
 		};
 
 		uart@d8370000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8370000 0x1040>;
 			interrupts = <31>;
-			clocks = <&ref24>;
+			clocks = <&clkuart4>;
 		};
 
 		uart@d8380000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd8380000 0x1040>;
 			interrupts = <30>;
-			clocks = <&ref24>;
+			clocks = <&clkuart5>;
 		};
 
 		rtc@d8100000 {
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 83b9467559bb..db3c0a12e052 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -75,6 +75,22 @@
 					reg = <0x204>;
 				};
 
+				clkuart0: uart0 {
+ 					#clock-cells = <0>;
+ 					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <1>;
+ 				};
+
+				clkuart1: uart1 {
+					#clock-cells = <0>;
+					compatible = "via,vt8500-device-clock";
+					clocks = <&ref24>;
+					enable-reg = <0x250>;
+					enable-bit = <2>;
+				};
+
 				arm: arm {
 					#clock-cells = <0>;
 					compatible = "via,vt8500-device-clock";
@@ -128,14 +144,14 @@
 			compatible = "via,vt8500-uart";
 			reg = <0xd8200000 0x1040>;
 			interrupts = <32>;
-			clocks = <&ref24>;
+			clocks = <&clkuart0>;
 		};
 
 		uart@d82b0000 {
 			compatible = "via,vt8500-uart";
 			reg = <0xd82b0000 0x1040>;
 			interrupts = <33>;
-			clocks = <&ref24>;
+			clocks = <&clkuart1>;
 		};
 
 		rtc@d8100000 {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 401c1262d4ed..5914b5654591 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -44,14 +44,14 @@
 			compatible = "xlnx,xuartps";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
-			clock = <50000000>;
+			clocks = <&uart_clk 0>;
 		};
 
 		uart1: uart@e0001000 {
 			compatible = "xlnx,xuartps";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
-			clock = <50000000>;
+			clocks = <&uart_clk 1>;
 		};
 
 		slcr: slcr@f8000000 {
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 9a23739f7026..442497363db9 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -16,6 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/platform_data/sa11x0-serial.h>
 #include <linux/serial_core.h>
+#include <linux/platform_device.h>
 #include <linux/mfd/ucb1x00.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
diff --git a/arch/arm/plat-samsung/include/plat/adc.h b/arch/arm/plat-samsung/include/plat/adc.h
index b258a08de591..2fc89315553f 100644
--- a/arch/arm/plat-samsung/include/plat/adc.h
+++ b/arch/arm/plat-samsung/include/plat/adc.h
@@ -15,6 +15,7 @@
 #define __ASM_PLAT_ADC_H __FILE__
 
 struct s3c_adc_client;
+struct platform_device;
 
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig
index 8d513a8c5266..d84707d55203 100644
--- a/arch/ia64/hp/sim/Kconfig
+++ b/arch/ia64/hp/sim/Kconfig
@@ -8,6 +8,7 @@ config HP_SIMETH
 
 config HP_SIMSERIAL
 	bool "Simulated serial driver support"
+	depends on TTY
 
 config HP_SIMSERIAL_CONSOLE
 	bool "Console for HP simulator"
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index fc3924d18c1f..da2f319fb71d 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -53,7 +53,7 @@ struct tty_driver *hp_simserial_driver;
 
 static struct console *console;
 
-static void receive_chars(struct tty_struct *tty)
+static void receive_chars(struct tty_port *port)
 {
 	unsigned char ch;
 	static unsigned char seen_esc = 0;
@@ -81,10 +81,10 @@ static void receive_chars(struct tty_struct *tty)
 		}
 		seen_esc = 0;
 
-		if (tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0)
+		if (tty_insert_flip_char(port, ch, TTY_NORMAL) == 0)
 			break;
 	}
-	tty_flip_buffer_push(tty);
+	tty_flip_buffer_push(port);
 }
 
 /*
@@ -93,18 +93,9 @@ static void receive_chars(struct tty_struct *tty)
 static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 {
 	struct serial_state *info = dev_id;
-	struct tty_struct *tty = tty_port_tty_get(&info->port);
 
-	if (!tty) {
-		printk(KERN_INFO "%s: tty=0 problem\n", __func__);
-		return IRQ_NONE;
-	}
-	/*
-	 * pretty simple in our case, because we only get interrupts
-	 * on inbound traffic
-	 */
-	receive_chars(tty);
-	tty_kref_put(tty);
+	receive_chars(&info->port);
+
 	return IRQ_HANDLED;
 }
 
@@ -435,7 +426,7 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	struct tty_port *port = &info->port;
 
 	tty->driver_data = info;
-	tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	/*
 	 * figure out which console to use (should be one already)
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index c4cdfe444c64..4bc945dfe467 100644
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -41,7 +41,7 @@ config NFBLOCK
 
 config NFCON
 	tristate "NatFeat console driver"
-	depends on NATFEAT
+	depends on TTY && NATFEAT
 	help
 	  Say Y to include support for the ARAnyM NatFeat console driver
 	  which allows the console output to be redirected to the stderr
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
index 9cb9d43a3a0e..e05ad4da44d9 100644
--- a/arch/mips/sni/a20r.c
+++ b/arch/mips/sni/a20r.c
@@ -118,7 +118,7 @@ static struct resource sc26xx_rsrc[] = {
 	}
 };
 
-#include <linux/platform_data/sccnxp.h>
+#include <linux/platform_data/serial-sccnxp.h>
 
 static struct sccnxp_pdata sccnxp_data = {
 	.reg_shift	= 2,
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 81d5cb9b6569..bf6e949a2f87 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -524,7 +524,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.state->port.tty;
+	struct tty_port *tport = &port->uart.state->port;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
@@ -534,10 +534,10 @@ static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 	push = 0;
 
 	count = CIRC_CNT(port->rx_inp, port->rx_outp, MNSC_BUFFER_SIZE);
-	count = tty_buffer_request_room(tty, count);
+	count = tty_buffer_request_room(tport, count);
 	if (count == 0) {
-		if (!tty->low_latency)
-			tty_flip_buffer_push(tty);
+		if (!tport->low_latency)
+			tty_flip_buffer_push(tport);
 		return;
 	}
 
@@ -545,8 +545,8 @@ try_again:
 	/* pull chars out of the hat */
 	ix = ACCESS_ONCE(port->rx_outp);
 	if (CIRC_CNT(port->rx_inp, ix, MNSC_BUFFER_SIZE) == 0) {
-		if (push && !tty->low_latency)
-			tty_flip_buffer_push(tty);
+		if (push && !tport->low_latency)
+			tty_flip_buffer_push(tport);
 		return;
 	}
 
@@ -666,19 +666,19 @@ insert:
 		else
 			flag = TTY_NORMAL;
 
-		tty_insert_flip_char(tty, ch, flag);
+		tty_insert_flip_char(tport, ch, flag);
 	}
 
 	/* overrun is special, since it's reported immediately, and doesn't
 	 * affect the current character
 	 */
 	if (overrun)
-		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
 
 	count--;
 	if (count <= 0) {
-		if (!tty->low_latency)
-			tty_flip_buffer_push(tty);
+		if (!tport->low_latency)
+			tty_flip_buffer_push(tport);
 		return;
 	}
 
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 9f2820659da2..c600f39aa453 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -21,6 +21,7 @@ config PARISC
 	select HAVE_MOD_ARCH_SPECIFIC
 	select MODULES_USE_ELF_RELA
 	select CLONE_BACKWARDS
+	select TTY # Needed for pdc_cons.c
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index efc5e7d30530..d5cae55195ec 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -138,23 +138,17 @@ static const struct tty_operations pdc_console_tty_ops = {
 static void pdc_console_poll(unsigned long unused)
 {
 	int data, count = 0;
-	struct tty_struct *tty = tty_port_tty_get(&tty_port);
-
-	if (!tty)
-		return;
 
 	while (1) {
 		data = pdc_console_poll_key(NULL);
 		if (data == -1)
 			break;
-		tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL);
+		tty_insert_flip_char(&tty_port, data & 0xFF, TTY_NORMAL);
 		count ++;
 	}
 
 	if (count)
-		tty_flip_buffer_push(tty);
-
-	tty_kref_put(tty);
+		tty_flip_buffer_push(&tty_port);
 
 	if (pdc_cons.flags & CON_ENABLED)
 		mod_timer(&pdc_console_timer, jiffies + PDC_CONS_POLL_DELAY);
diff --git a/arch/sparc/kernel/kgdb_32.c b/arch/sparc/kernel/kgdb_32.c
index 2e424a576a36..dcf210811af4 100644
--- a/arch/sparc/kernel/kgdb_32.c
+++ b/arch/sparc/kernel/kgdb_32.c
@@ -5,6 +5,7 @@
 
 #include <linux/kgdb.h>
 #include <linux/kdebug.h>
+#include <linux/sched.h>
 
 #include <asm/kdebug.h>
 #include <asm/ptrace.h>
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 1bb7ad4aeff4..36136e81f5d8 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -121,6 +121,7 @@ config DEBUG_COPY_FROM_USER
 	def_bool n
 
 config HVC_TILE
+	depends on TTY
 	select HVC_DRIVER
 	def_bool y
 
diff --git a/arch/um/Kconfig.common b/arch/um/Kconfig.common
index 648121b037d5..bceee6623b00 100644
--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -12,6 +12,7 @@ config UML
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IO
 	select GENERIC_CLOCKEVENTS
+	select TTY # Needed for line.c
 
 config MMU
 	bool
diff --git a/arch/um/drivers/chan.h b/arch/um/drivers/chan.h
index 02b5a76e98d9..78f1b8999964 100644
--- a/arch/um/drivers/chan.h
+++ b/arch/um/drivers/chan.h
@@ -27,8 +27,7 @@ struct chan {
 	void *data;
 };
 
-extern void chan_interrupt(struct line *line,
-			   struct tty_struct *tty, int irq);
+extern void chan_interrupt(struct line *line, int irq);
 extern int parse_chan_pair(char *str, struct line *line, int device,
 			   const struct chan_opts *opts, char **error_out);
 extern int write_chan(struct chan *chan, const char *buf, int len,
diff --git a/arch/um/drivers/chan_kern.c b/arch/um/drivers/chan_kern.c
index e9a0abc6a32f..15c553c239a1 100644
--- a/arch/um/drivers/chan_kern.c
+++ b/arch/um/drivers/chan_kern.c
@@ -81,12 +81,6 @@ static const struct chan_ops not_configged_ops = {
 };
 #endif /* CONFIG_NOCONFIG_CHAN */
 
-static void tty_receive_char(struct tty_struct *tty, char ch)
-{
-	if (tty)
-		tty_insert_flip_char(tty, ch, TTY_NORMAL);
-}
-
 static int open_one_chan(struct chan *chan)
 {
 	int fd, err;
@@ -137,11 +131,9 @@ void chan_enable_winch(struct chan *chan, struct tty_struct *tty)
 static void line_timer_cb(struct work_struct *work)
 {
 	struct line *line = container_of(work, struct line, task.work);
-	struct tty_struct *tty = tty_port_tty_get(&line->port);
 
 	if (!line->throttled)
-		chan_interrupt(line, tty, line->driver->read_irq);
-	tty_kref_put(tty);
+		chan_interrupt(line, line->driver->read_irq);
 }
 
 int enable_chan(struct line *line)
@@ -552,8 +544,9 @@ int parse_chan_pair(char *str, struct line *line, int device,
 	return 0;
 }
 
-void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
+void chan_interrupt(struct line *line, int irq)
 {
+	struct tty_port *port = &line->port;
 	struct chan *chan = line->chan_in;
 	int err;
 	char c;
@@ -562,21 +555,24 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
 		goto out;
 
 	do {
-		if (tty && !tty_buffer_request_room(tty, 1)) {
+		if (!tty_buffer_request_room(port, 1)) {
 			schedule_delayed_work(&line->task, 1);
 			goto out;
 		}
 		err = chan->ops->read(chan->fd, &c, chan->data);
 		if (err > 0)
-			tty_receive_char(tty, c);
+			tty_insert_flip_char(port, c, TTY_NORMAL);
 	} while (err > 0);
 
 	if (err == 0)
 		reactivate_fd(chan->fd, irq);
 	if (err == -EIO) {
 		if (chan->primary) {
-			if (tty != NULL)
+			struct tty_struct *tty = tty_port_tty_get(&line->port);
+			if (tty != NULL) {
 				tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 			if (line->chan_out != chan)
 				close_one_chan(line->chan_out, 1);
 		}
@@ -585,6 +581,5 @@ void chan_interrupt(struct line *line, struct tty_struct *tty, int irq)
 			return;
 	}
  out:
-	if (tty)
-		tty_flip_buffer_push(tty);
+	tty_flip_buffer_push(port);
 }
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 9ffc28bd4b7a..f1b38571f94e 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -19,11 +19,10 @@ static irqreturn_t line_interrupt(int irq, void *data)
 {
 	struct chan *chan = data;
 	struct line *line = chan->line;
-	struct tty_struct *tty = tty_port_tty_get(&line->port);
 
 	if (line)
-		chan_interrupt(line, tty, irq);
-	tty_kref_put(tty);
+		chan_interrupt(line, irq);
+
 	return IRQ_HANDLED;
 }
 
@@ -234,7 +233,7 @@ void line_unthrottle(struct tty_struct *tty)
 	struct line *line = tty->driver_data;
 
 	line->throttled = 0;
-	chan_interrupt(line, tty, line->driver->read_irq);
+	chan_interrupt(line, line->driver->read_irq);
 
 	/*
 	 * Maybe there is enough stuff pending that calling the interrupt
diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig
index 7872a3330fb5..29043d2048a0 100644
--- a/arch/x86/lguest/Kconfig
+++ b/arch/x86/lguest/Kconfig
@@ -2,6 +2,7 @@ config LGUEST_GUEST
 	bool "Lguest guest support"
 	select PARAVIRT
 	depends on X86_32
+	select TTY
 	select VIRTUALIZATION
 	select VIRTIO
 	select VIRTIO_CONSOLE
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 5aab1acabf1c..ad64c73b8675 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -132,6 +132,7 @@ choice
 
 config XTENSA_PLATFORM_ISS
 	bool "ISS"
+	depends on TTY
 	select XTENSA_CALIBRATE_CCOUNT
 	select SERIAL_CONSOLE
 	select XTENSA_ISS_NETWORK
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 8207a119eee9..da9866f7fecf 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -58,7 +58,8 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	tty->port = &serial_port;
 	spin_lock(&timer_lock);
 	if (tty->count == 1) {
-		setup_timer(&serial_timer, rs_poll, (unsigned long)tty);
+		setup_timer(&serial_timer, rs_poll,
+				(unsigned long)&serial_port);
 		mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);
 	}
 	spin_unlock(&timer_lock);
@@ -97,8 +98,7 @@ static int rs_write(struct tty_struct * tty,
 
 static void rs_poll(unsigned long priv)
 {
-	struct tty_struct* tty = (struct tty_struct*) priv;
-
+	struct tty_port *port = (struct tty_port *)priv;
 	struct timeval tv = { .tv_sec = 0, .tv_usec = 0 };
 	int i = 0;
 	unsigned char c;
@@ -107,12 +107,12 @@ static void rs_poll(unsigned long priv)
 
 	while (__simc(SYS_select_one, 0, XTISS_SELECT_ONE_READ, (int)&tv,0,0)){
 		__simc (SYS_read, 0, (unsigned long)&c, 1, 0, 0);
-		tty_insert_flip_char(tty, c, TTY_NORMAL);
+		tty_insert_flip_char(port, c, TTY_NORMAL);
 		i++;
 	}
 
 	if (i)
-		tty_flip_buffer_push(tty);
+		tty_flip_buffer_push(port);
 
 
 	mod_timer(&serial_timer, jiffies + SERIAL_TIMER_VALUE);