powerpc/powernv: Add poweroff (EPOW, DPO) events support for PowerNV platform

This patch adds support for OPAL EPOW (Environmental and Power Warnings)
and DPO (Delayed Power Off) events for the PowerNV platform. These events
are generated on FSP (Flexible Service Processor) based systems. EPOW
events are generated due to various critical system conditions that
require system shutdown. A few examples of these conditions are high
ambient temperature or system running on UPS power with low UPS battery.
DPO event is generated in response to admin initiated system shutdown
request. Upon receipt of EPOW and DPO events the host kernel invokes
orderly_poweroff() for performing graceful system shutdown.

Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Acked-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 40 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index e9e4c52f3685..442995bacb33 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -756,6 +756,46 @@ struct opal_i2c_request {
 	__be64 buffer_ra;		/* Buffer real address */
 };
 
+/*
+ * EPOW status sharing (OPAL and the host)
+ *
+ * The host will pass on OPAL, a buffer of length OPAL_SYSEPOW_MAX
+ * with individual elements being 16 bits wide to fetch the system
+ * wide EPOW status. Each element in the buffer will contain the
+ * EPOW status in it's bit representation for a particular EPOW sub
+ * class as defiend here. So multiple detailed EPOW status bits
+ * specific for any sub class can be represented in a single buffer
+ * element as it's bit representation.
+ */
+
+/* System EPOW type */
+enum OpalSysEpow {
+	OPAL_SYSEPOW_POWER	= 0,	/* Power EPOW */
+	OPAL_SYSEPOW_TEMP	= 1,	/* Temperature EPOW */
+	OPAL_SYSEPOW_COOLING	= 2,	/* Cooling EPOW */
+	OPAL_SYSEPOW_MAX	= 3,	/* Max EPOW categories */
+};
+
+/* Power EPOW */
+enum OpalSysPower {
+	OPAL_SYSPOWER_UPS	= 0x0001, /* System on UPS power */
+	OPAL_SYSPOWER_CHNG	= 0x0002, /* System power config change */
+	OPAL_SYSPOWER_FAIL	= 0x0004, /* System impending power failure */
+	OPAL_SYSPOWER_INCL	= 0x0008, /* System incomplete power */
+};
+
+/* Temperature EPOW */
+enum OpalSysTemp {
+	OPAL_SYSTEMP_AMB	= 0x0001, /* System over ambient temperature */
+	OPAL_SYSTEMP_INT	= 0x0002, /* System over internal temperature */
+	OPAL_SYSTEMP_HMD	= 0x0004, /* System over ambient humidity */
+};
+
+/* Cooling EPOW */
+enum OpalSysCooling {
+	OPAL_SYSCOOL_INSF	= 0x0001, /* System insufficient cooling */
+};
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __OPAL_API_H */