summaryrefslogtreecommitdiff
path: root/arch/mips/txx9/jmr3927
diff options
context:
space:
mode:
authorAtsushi Nemoto <anemo@mba.ocn.ne.jp>2008-07-24 00:25:19 +0900
committerRalf Baechle <ralf@linux-mips.org>2008-07-30 21:54:39 +0100
commitf6727fb889c664be094fa041a0fdf0f1a1caefb6 (patch)
tree176b220f4cc39168f982eb90ab1fe7bba7a64da5 /arch/mips/txx9/jmr3927
parent683147254ef7e69ebbbe55280ba6a3c5ae2325d8 (diff)
[MIPS] TXx9: Make tx3927-specific code more independent
Make some TX3927 SoC specific code independent from board specific code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/txx9/jmr3927')
-rw-r--r--arch/mips/txx9/jmr3927/irq.c43
-rw-r--r--arch/mips/txx9/jmr3927/setup.c136
2 files changed, 29 insertions, 150 deletions
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
index f3b60233e99d..68f74368ddec 100644
--- a/arch/mips/txx9/jmr3927/irq.c
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -46,13 +46,6 @@
#error JMR3927_IRQ_END > NR_IRQS
#endif
-static unsigned char irc_level[TX3927_NUM_IR] = {
- 5, 5, 5, 5, 5, 5, /* INT[5:0] */
- 7, 7, /* SIO */
- 5, 5, 5, 0, 0, /* DMA, PIO, PCI */
- 6, 6, 6 /* TMR */
-};
-
/*
* CP0_STATUS is a thread's resource (saved/restored on context switch).
* So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,10 +96,18 @@ static int jmr3927_irq_dispatch(int pending)
return irq;
}
-static void __init jmr3927_irq_init(void);
+static struct irq_chip jmr3927_irq_ioc = {
+ .name = "jmr3927_ioc",
+ .ack = mask_irq_ioc,
+ .mask = mask_irq_ioc,
+ .mask_ack = mask_irq_ioc,
+ .unmask = unmask_irq_ioc,
+};
void __init jmr3927_irq_setup(void)
{
+ int i;
+
txx9_irq_dispatch = jmr3927_irq_dispatch;
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
@@ -122,30 +123,10 @@ void __init jmr3927_irq_setup(void)
/* clear PCI Reset interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- jmr3927_irq_init();
+ tx3927_irq_init();
+ for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+ set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
/* setup IOC interrupt 1 (PCI, MODEM) */
set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
- /* enable all CPU interrupt bits. */
- set_c0_status(ST0_IM); /* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
- .name = "jmr3927_ioc",
- .ack = mask_irq_ioc,
- .mask = mask_irq_ioc,
- .mask_ack = mask_irq_ioc,
- .unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
- u32 i;
-
- txx9_irq_init(TX3927_IRC_REG);
- for (i = 0; i < TXx9_MAX_IR; i++)
- txx9_irq_set_pri(i, irc_level[i]);
- for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
- set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
}
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
index ae34e9a4a8ac..7378a835d4e3 100644
--- a/arch/mips/txx9/jmr3927/setup.c
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -34,20 +34,13 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
#include <asm/reboot.h>
+#include <asm/txx9pio.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#include <asm/txx9/jmr3927.h>
#include <asm/mipsregs.h>
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
static void jmr3927_machine_restart(char *command)
{
local_irq_disable();
@@ -65,10 +58,7 @@ static void jmr3927_machine_restart(char *command)
static void __init jmr3927_time_init(void)
{
- txx9_clockevent_init(TX3927_TMR_REG(0),
- JMR3927_IRQ_IRC_TMR(0),
- JMR3927_IMCLK);
- txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+ tx3927_time_init(0, 1);
}
#define DO_WRITE_THROUGH
@@ -118,34 +108,12 @@ static void __init jmr3927_mem_setup(void)
jmr3927_board_init();
argptr = prom_getcmdline();
-
- if ((argptr = strstr(argptr, "toeon")) != NULL)
- jmr3927_ccfg_toeon = 1;
- argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "ip=")) == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " ip=bootp");
}
-#ifdef CONFIG_SERIAL_TXX9
- {
- extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
- struct uart_port req;
- for(i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
- req.mapbase = TX3927_SIO_REG(i);
- req.irq = i == 0 ?
- JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
- if (i == 0)
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = JMR3927_IMCLK;
- early_serial_txx9_setup(&req);
- }
- }
+ tx3927_setup_serial(1 << 1); /* ch1: noCTS */
#ifdef CONFIG_SERIAL_TXX9_CONSOLE
argptr = prom_getcmdline();
if ((argptr = strstr(argptr, "console=")) == NULL) {
@@ -153,11 +121,8 @@ static void __init jmr3927_mem_setup(void)
strcat(argptr, " console=ttyS1,115200");
}
#endif
-#endif
}
-static void tx3927_setup(void);
-
static void __init jmr3927_pci_setup(void)
{
#ifdef CONFIG_PCI
@@ -184,27 +149,7 @@ static void __init jmr3927_pci_setup(void)
static void __init jmr3927_board_init(void)
{
- tx3927_setup();
- jmr3927_pci_setup();
-
- /* SIO0 DTR on */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
- jmr3927_led_set(0);
-
- printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
- jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
- jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_dipsw1(), jmr3927_dipsw2(),
- jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
- int i;
-
txx9_cpu_clock = JMR3927_CORECLK;
- txx9_gbus_clock = JMR3927_GBUSCLK;
/* SDRAMC are configured by PROM */
/* ROMC */
@@ -213,74 +158,32 @@ static void __init tx3927_setup(void)
tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
- /* CCFG */
- /* enable Timeout BusError */
- if (jmr3927_ccfg_toeon)
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
- /* clear BusErrorOnWrite flag */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
- /* Disable PCI snoop */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
- /* do reset on watchdog */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
- /* Enable PCI SNOOP - with write through only */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
/* Pin selection */
tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
tx3927_ccfgptr->pcfg |=
TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
- printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
- tx3927_ccfgptr->crir,
- tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
- /* TMR */
- for (i = 0; i < TX3927_NR_TMR; i++)
- txx9_tmr_init(TX3927_TMR_REG(i));
-
- /* DMA */
- tx3927_dmaptr->mcr = 0;
- for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
- /* reset channel */
- tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
- tx3927_dmaptr->ch[i].ccr = 0;
- }
- /* enable DMA */
-#ifdef __BIG_ENDIAN
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+ tx3927_setup();
- /* PIO */
/* PIO[15:12] connected to LEDs */
__raw_writel(0x0000f000, &tx3927_pioptr->dir);
- __raw_writel(0, &tx3927_pioptr->maskcpu);
- __raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
gpio_request(11, "dipsw1");
gpio_request(10, "dipsw2");
- {
- unsigned int conf;
- conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk("TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk("TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk("TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk("TX3927 D-Cache WriteBack.\n");
- else
- printk("TX3927 D-Cache WriteBack (CWF) .\n");
- }
+ jmr3927_pci_setup();
+
+ /* SIO0 DTR on */
+ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+ jmr3927_led_set(0);
+
+ printk(KERN_INFO
+ "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+ jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+ jmr3927_dipsw1(), jmr3927_dipsw2(),
+ jmr3927_dipsw3(), jmr3927_dipsw4());
}
/* This trick makes rtc-ds1742 driver usable as is. */
@@ -308,11 +211,6 @@ static int __init jmr3927_rtc_init(void)
return IS_ERR(dev) ? PTR_ERR(dev) : 0;
}
-static void __init tx3927_wdt_init(void)
-{
- txx9_wdt_init(TX3927_TMR_REG(2));
-}
-
static void __init jmr3927_device_init(void)
{
__swizzle_addr_b = jmr3927_swizzle_addr_b;