summaryrefslogtreecommitdiff
path: root/arch/mips/sibyte
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2006-04-03 17:56:36 +0100
committerRalf Baechle <ralf@linux-mips.org>2006-04-19 04:14:21 +0200
commite4ac58afdfac792c0583af30dbd9eae53e24c78b (patch)
tree7517bef2c515fc630e4d3d238867b91cde96f558 /arch/mips/sibyte
parentd35d473c25d43d7db3e5e18b66d558d2a631cca8 (diff)
[MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/sibyte')
-rw-r--r--arch/mips/sibyte/bcm1480/Makefile2
-rw-r--r--arch/mips/sibyte/bcm1480/irq.c77
-rw-r--r--arch/mips/sibyte/bcm1480/irq_handler.S165
-rw-r--r--arch/mips/sibyte/sb1250/Makefile2
-rw-r--r--arch/mips/sibyte/sb1250/irq.c78
-rw-r--r--arch/mips/sibyte/sb1250/irq_handler.S147
6 files changed, 147 insertions, 324 deletions
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
index 538d5a51ae94..7b36ff3873b7 100644
--- a/arch/mips/sibyte/bcm1480/Makefile
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -1,4 +1,4 @@
-obj-y := setup.o irq.o irq_handler.o time.o
+obj-y := setup.o irq.o time.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 9cf7d713b13c..e61760b14d99 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -187,9 +187,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
#endif
-/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
-extern void bcm1480_irq_handler(void);
-
/*****************************************************************************/
static unsigned int startup_bcm1480_irq(unsigned int irq)
@@ -422,7 +419,6 @@ void __init arch_init_irq(void)
#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
- set_except_vector(0, bcm1480_irq_handler);
#ifdef CONFIG_KGDB
if (kgdb_flag) {
@@ -473,3 +469,76 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs)
}
#endif /* CONFIG_KGDB */
+
+static inline int dclz(unsigned long long x)
+{
+ int lz;
+
+ __asm__ (
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return lz;
+}
+
+extern void bcm1480_timer_interrupt(struct pt_regs *regs);
+extern void bcm1480_mailbox_interrupt(struct pt_regs *regs);
+extern void bcm1480_kgdb_interrupt(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending;
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ write_c0_compare(read_c0_count());
+#endif
+
+ pending = read_c0_cause();
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
+ sbprof_cpu_intr(exception_epc(regs));
+#endif
+
+ if (pending & CAUSEF_IP4)
+ bcm1480_timer_interrupt(regs);
+
+#ifdef CONFIG_SMP
+ if (pending & CAUSEF_IP3)
+ bcm1480_mailbox_interrupt(regs);
+#endif
+
+#ifdef CONFIG_KGDB
+ if (pending & CAUSEF_IP6)
+ bcm1480_kgdb_interrupt(regs); /* KGDB (uart 1) */
+#endif
+
+ if (pending & CAUSEF_IP2) {
+ unsigned long long mask_h, mask_l;
+ unsigned long base;
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've
+ * got to check the 1480 interrupt registers to figure out what
+ * to do. Need to detect which CPU we're on, now that
+ * smp_affinity is supported.
+ */
+ base = A_BCM1480_IMR_MAPPER(smp_processor_id());
+ mask_h = __raw_readq(
+ IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
+ mask_l = __raw_readq(
+ IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
+
+ if (!mask_h) {
+ if (mask_h ^ 1)
+ do_IRQ(63 - dclz(mask_h), regs);
+ else
+ do_IRQ(127 - dclz(mask_l), regs);
+ }
+ }
+}
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
deleted file mode 100644
index 408db88d050f..000000000000
--- a/arch/mips/sibyte/bcm1480/irq_handler.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * bcm1480_irq_handler() is the routine that is actually called when an
- * interrupt occurs. It is installed as the exception vector handler in
- * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
- *
- * In the handle we figure out which interrupts need handling, and use that
- * to call the dispatcher, which will take care of actually calling
- * registered handlers
- *
- * Note that we take care of all raised interrupts in one go at the handler.
- * This is more BSDish than the Indy code, and also, IMHO, more sane.
- */
-#include <linux/config.h>
-
-#include <asm/addrspace.h>
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/sibyte/sb1250_defs.h>
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-
-/*
- * What a pain. We have to be really careful saving the upper 32 bits of any
- * register across function calls if we don't want them trashed--since were
- * running in -o32, the calling routing never saves the full 64 bits of a
- * register across a function call. Being the interrupt handler, we're
- * guaranteed that interrupts are disabled during this code so we don't have
- * to worry about random interrupts blasting the high 32 bits.
- */
-
- .text
- .set push
- .set noreorder
- .set noat
- .set mips64
- #.set mips4
- .align 5
- NESTED(bcm1480_irq_handler, PT_SIZE, sp)
- SAVE_ALL
- CLI
-
-#ifdef CONFIG_SIBYTE_BCM1480_PROF
- /* Set compare to count to silence count/compare timer interrupts */
- mfc0 t1, CP0_COUNT
- mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
-#endif
- /* Read cause */
- mfc0 s0, CP0_CAUSE
-
-#ifdef CONFIG_SIBYTE_BCM1480_PROF
- /* Cpu performance counter interrupt is routed to IP[7] */
- andi t1, s0, CAUSEF_IP7
- beqz t1, 0f
- srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
- and t1, t1, 0x4 /* mask to get just BD bit */
-#ifdef CONFIG_MIPS64
- dmfc0 a0, CP0_EPC
- daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
-#else
- mfc0 a0, CP0_EPC
- addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
-#endif
- jal sbprof_cpu_intr
- nop
- j ret_from_irq
- nop
-0:
-#endif
-
- /* Timer interrupt is routed to IP[4] */
- andi t1, s0, CAUSEF_IP4
- beqz t1, 1f
- nop
- jal bcm1480_timer_interrupt
- move a0, sp /* Pass the registers along */
- j ret_from_irq
- nop /* delay slot */
-1:
-
-#ifdef CONFIG_SMP
- /* Mailbox interrupt is routed to IP[3] */
- andi t1, s0, CAUSEF_IP3
- beqz t1, 2f
- nop
- jal bcm1480_mailbox_interrupt
- move a0, sp
- j ret_from_irq
- nop /* delay slot */
-2:
-#endif
-
-#ifdef CONFIG_KGDB
- /* KGDB (uart 1) interrupt is routed to IP[6] */
- andi t1, s0, CAUSEF_IP6
- beqz t1, 3f
- nop /* delay slot */
- jal bcm1480_kgdb_interrupt
- move a0, sp
- j ret_from_irq
- nop /* delay slot */
-3:
-#endif
-
- and t1, s0, CAUSEF_IP2
- beqz t1, 9f
- nop
-
- /*
- * Default...we've hit an IP[2] interrupt, which means we've got
- * to check the 1480 interrupt registers to figure out what to do
- * Need to detect which CPU we're on, now that smp_affinity is
- * supported.
- */
- PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
-#ifdef CONFIG_SMP
- lw t1, TI_CPU($28)
- sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
- addu v0, v0, t1
-#endif
-
- /* Read IP[2] status (get both high and low halves of status) */
- ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
- ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
-
- move s2, zero /* intr number */
- li s3, 64
-
- beqz s0, 9f /* No interrupts. Return. */
- move a1, sp
-
- xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
- movz s2, s3, s4 /* start the intr number at 64, and */
- movz s0, s1, s4 /* look at the low status value. */
-
- dclz s1, s0 /* Find the next interrupt. */
- dsubu a0, zero, s1
- daddiu a0, a0, 63
- jal do_IRQ
- daddu a0, a0, s2
-
-9: j ret_from_irq
- nop
-
- .set pop
- END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index a8af84697588..a2fdbd62f8ac 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -1,4 +1,4 @@
-obj-y := setup.o irq.o irq_handler.o time.o
+obj-y := setup.o irq.o time.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 589537bfcc3d..0f6e54db4888 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -163,10 +163,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
}
#endif
-
-/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */
-extern void sb1250_irq_handler(void);
-
/*****************************************************************************/
static unsigned int startup_sb1250_irq(unsigned int irq)
@@ -379,7 +375,6 @@ void __init arch_init_irq(void)
#endif
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
- set_except_vector(0, sb1250_irq_handler);
#ifdef CONFIG_KGDB
if (kgdb_flag) {
@@ -409,7 +404,7 @@ void __init arch_init_irq(void)
#define duart_out(reg, val) csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
#define duart_in(reg) csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
-void sb1250_kgdb_interrupt(struct pt_regs *regs)
+static void sb1250_kgdb_interrupt(struct pt_regs *regs)
{
/*
* Clear break-change status (allow some time for the remote
@@ -424,3 +419,74 @@ void sb1250_kgdb_interrupt(struct pt_regs *regs)
}
#endif /* CONFIG_KGDB */
+
+static inline int dclz(unsigned long long x)
+{
+ int lz;
+
+ __asm__ (
+ " .set push \n"
+ " .set mips64 \n"
+ " dclz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (lz)
+ : "r" (x));
+
+ return lz;
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+ unsigned int pending;
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ write_c0_count(read_c0_count());
+#endif
+
+ /*
+ * What a pain. We have to be really careful saving the upper 32 bits
+ * of any * register across function calls if we don't want them
+ * trashed--since were running in -o32, the calling routing never saves
+ * the full 64 bits of a register across a function call. Being the
+ * interrupt handler, we're guaranteed that interrupts are disabled
+ * during this code so we don't have to worry about random interrupts
+ * blasting the high 32 bits.
+ */
+
+ pending = read_c0_cause();
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+ if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */
+ sbprof_cpu_intr(exception_epc(regs));
+ }
+#endif
+
+ if (pending & CAUSEF_IP4)
+ sb1250_timer_interrupt(regs);
+
+#ifdef CONFIG_SMP
+ if (pending & CAUSEF_IP3)
+ sb1250_mailbox_interrupt(regs);
+#endif
+
+#ifdef CONFIG_KGDB
+ if (pending & CAUSEF_IP6) /* KGDB (uart 1) */
+ sb1250_kgdb_interrupt(regs);
+#endif
+
+ if (pending & CAUSEF_IP2) {
+ unsigned long long mask;
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've
+ * got to check the 1250 interrupt registers to figure out what
+ * to do. Need to detect which CPU we're on, now that
+ ~ smp_affinity is supported.
+ */
+ mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(),
+ R_IMR_INTERRUPT_STATUS_BASE)));
+ if (mask)
+ do_IRQ(63 - dclz(mask), regs);
+ }
+}
diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S
deleted file mode 100644
index 60edc8fb302b..000000000000
--- a/arch/mips/sibyte/sb1250/irq_handler.S
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * sb1250_handle_int() is the routine that is actually called when an interrupt
- * occurs. It is installed as the exception vector handler in arch_init_irq()
- * in arch/mips/sibyte/sb1250/irq.c
- *
- * In the handle we figure out which interrupts need handling, and use that to
- * call the dispatcher, which will take care of actually calling registered
- * handlers
- *
- * Note that we take care of all raised interrupts in one go at the handler.
- * This is more BSDish than the Indy code, and also, IMHO, more sane.
- */
-#include <linux/config.h>
-
-#include <asm/addrspace.h>
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/sibyte/sb1250_defs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-
-/*
- * What a pain. We have to be really careful saving the upper 32 bits of any
- * register across function calls if we don't want them trashed--since were
- * running in -o32, the calling routing never saves the full 64 bits of a
- * register across a function call. Being the interrupt handler, we're
- * guaranteed that interrupts are disabled during this code so we don't have
- * to worry about random interrupts blasting the high 32 bits.
- */
-
- .text
- .set push
- .set noreorder
- .set noat
- .set mips64
- .align 5
- NESTED(sb1250_irq_handler, PT_SIZE, sp)
- SAVE_ALL
- CLI
-
-#ifdef CONFIG_SIBYTE_SB1250_PROF
- /* Set compare to count to silence count/compare timer interrupts */
- mfc0 t1, CP0_COUNT
- mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
-#endif
- /* Read cause */
- mfc0 s0, CP0_CAUSE
-
-#ifdef CONFIG_SIBYTE_SB1250_PROF
- /* Cpu performance counter interrupt is routed to IP[7] */
- andi t1, s0, CAUSEF_IP7
- beqz t1, 0f
- srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
- and t1, t1, 0x4 /* mask to get just BD bit */
- mfc0 a0, CP0_EPC
- jal sbprof_cpu_intr
- addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
- j ret_from_irq
- nop
-0:
-#endif
-
- /* Timer interrupt is routed to IP[4] */
- andi t1, s0, CAUSEF_IP4
- beqz t1, 1f
- nop
- jal sb1250_timer_interrupt
- move a0, sp /* Pass the registers along */
- j ret_from_irq
- nop # delay slot
-1:
-
-#ifdef CONFIG_SMP
- /* Mailbox interrupt is routed to IP[3] */
- andi t1, s0, CAUSEF_IP3
- beqz t1, 2f
- nop
- jal sb1250_mailbox_interrupt
- move a0, sp
- j ret_from_irq
- nop # delay slot
-2:
-#endif
-
-#ifdef CONFIG_KGDB
- /* KGDB (uart 1) interrupt is routed to IP[6] */
- andi t1, s0, CAUSEF_IP6
- beqz t1, 1f
- nop # delay slot
- jal sb1250_kgdb_interrupt
- move a0, sp
- j ret_from_irq
- nop # delay slot
-1:
-#endif
-
- and t1, s0, CAUSEF_IP2
- beqz t1, 4f
- nop
-
- /*
- * Default...we've hit an IP[2] interrupt, which means we've got to
- * check the 1250 interrupt registers to figure out what to do
- * Need to detect which CPU we're on, now that smp_affinity is supported.
- */
- PTR_LA v0, CKSEG1 + A_IMR_CPU0_BASE
-#ifdef CONFIG_SMP
- lw t1, TI_CPU($28)
- sll t1, IMR_REGISTER_SPACING_SHIFT
- addu v0, t1
-#endif
- ld s0, R_IMR_INTERRUPT_STATUS_BASE(v0) /* read IP[2] status */
-
- beqz s0, 4f /* No interrupts. Return */
- move a1, sp
-
-3: dclz s1, s0 /* Find the next interrupt */
- dsubu a0, zero, s1
- daddiu a0, a0, 63
- jal do_IRQ
- nop
-
-4: j ret_from_irq
- nop
-
- .set pop
- END(sb1250_irq_handler)