Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

1 files changed, 0 insertions, 1335 deletions

diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
deleted file mode 100644
index 571edfd2ecf3..000000000000
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ /dev/null
@@ -1,1335 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/musb.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/spi/ad7877.h>
-#include <asm/bfin_sport.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-#ifdef CONFIG_BFIN527_EZKIT_V2
-const char bfin_board_name[] = "ADI BF527-EZKIT V2";
-#else
-const char bfin_board_name[] = "ADI BF527-EZKIT";
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-static struct resource musb_resources[] = {
-	[0] = {
-		.start	= 0xffc03800,
-		.end	= 0xffc03cff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {	/* general IRQ */
-		.start	= IRQ_USB_INT0,
-		.end	= IRQ_USB_INT0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "mc"
-	},
-	[2] = {	/* DMA IRQ */
-		.start	= IRQ_USB_DMA,
-		.end	= IRQ_USB_DMA,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-		.name	= "dma"
-	},
-};
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint	= 0,
-	.dyn_fifo	= 0,
-	.soft_con	= 1,
-	.dma		= 1,
-	.num_eps	= 8,
-	.dma_channels	= 8,
-	.gpio_vrsel	= GPIO_PG13,
-	/* Some custom boards need to be active low, just set it to "0"
-	 * if it is the case.
-	 */
-	.gpio_vrsel_active	= 1,
-	.clkin          = 24,           /* musb CLKIN in MHZ */
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HDRC) && defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC)
-	.mode		= MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config		= &musb_config,
-};
-
-static u64 musb_dmamask = ~(u32)0;
-
-static struct platform_device musb_device = {
-	.name		= "musb-blackfin",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &musb_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &musb_plat,
-	},
-	.num_resources	= ARRAY_SIZE(musb_resources),
-	.resource	= musb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
-
-static struct resource bf52x_t350mcqb_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf52x_t350mcqb_device = {
-	.name		= "bfin-t350mcqb",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bf52x_t350mcqb_resources),
-	.resource 	= bf52x_t350mcqb_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_8_BIT_PPI,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x1C0000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-	.end   = 0x203fffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-static struct mtd_partition partition_info[] = {
-	{
-		.name = "bootloader(nand)",
-		.offset = 0,
-		.size = 0x40000,
-	}, {
-		.name = "linux kernel(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = 4 * 1024 * 1024,
-	},
-	{
-		.name = "file system(nand)",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct bf5xx_nand_platform bf5xx_nand_platform = {
-	.data_width = NFC_NWIDTH_8,
-	.partitions = partition_info,
-	.nr_partitions = ARRAY_SIZE(partition_info),
-	.rd_dly = 3,
-	.wr_dly = 3,
-};
-
-static struct resource bf5xx_nand_resources[] = {
-	{
-		.start = NFC_CTL,
-		.end = NFC_DATA_RD + 2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = CH_NFC,
-		.end = CH_NFC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bf5xx_nand_device = {
-	.name = "bf5xx-nand",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
-	.resource = bf5xx_nand_resources,
-	.dev = {
-		.platform_data = &bf5xx_nand_platform,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-#include <linux/bfin_mac.h>
-static const unsigned short bfin_mac_peripherals[] = P_RMII0;
-
-static struct bfin_phydev_platform_data bfin_phydev_data[] = {
-	{
-		.addr = 1,
-		.irq = IRQ_MAC_PHYINT,
-	},
-};
-
-static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
-	.phydev_number = 1,
-	.phydev_data = bfin_phydev_data,
-	.phy_mode = PHY_INTERFACE_MODE_RMII,
-	.mac_peripherals = bfin_mac_peripherals,
-};
-
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-	.dev = {
-		.platform_data = &bfin_mii_bus_data,
-	}
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev = {
-		.platform_data = &bfin_mii_bus,
-	}
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 1,
-		.flags = IORESOURCE_BUS,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_export		= 0,	/* Export GPIO to gpiolib */
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-
-static const u16 bfin_snd_pin[][7] = {
-	{P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-		P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
-	{P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-		P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
-};
-
-static struct bfin_snd_platform_data bfin_snd_data[] = {
-	{
-		.pin_req = &bfin_snd_pin[0][0],
-	},
-	{
-		.pin_req = &bfin_snd_pin[1][0],
-	},
-};
-
-#define BFIN_SND_RES(x) \
-	[x] = { \
-		{ \
-			.start = SPORT##x##_TCR1, \
-			.end = SPORT##x##_TCR1, \
-			.flags = IORESOURCE_MEM \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_RX, \
-			.end = CH_SPORT##x##_RX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_TX, \
-			.end = CH_SPORT##x##_TX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = IRQ_SPORT##x##_ERROR, \
-			.end = IRQ_SPORT##x##_ERROR, \
-			.flags = IORESOURCE_IRQ, \
-		} \
-	}
-
-static struct resource bfin_snd_resources[][4] = {
-	BFIN_SND_RES(0),
-	BFIN_SND_RES(1),
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s_pcm = {
-	.name = "bfin-i2s-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-static struct platform_device bfin_ac97_pcm = {
-	.name = "bfin-ac97-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s = {
-	.name = "bfin-i2s",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	.num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
-	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
-	.dev = {
-		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-static const char * const ad1836_link[] = {
-	"bfin-i2s.0",
-	"spi0.4",
-};
-static struct platform_device bfin_ad1836_machine = {
-	.name = "bfin-snd-ad1836",
-	.id = -1,
-	.dev = {
-		.platform_data = (void *)ad1836_link,
-	},
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
-	{
-		.modalias = "ad183x",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-		.platform_data = "ad1836",
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 3,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_0,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7877)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF8,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 2,
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PF8,
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 3,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 7,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART1_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PF9,
-		.end = GPIO_PF9,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PF10,
-		.end = GPIO_PF10,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_PMIC_ADP5520)
-#include <linux/mfd/adp5520.h>
-
-	/*
-	 *  ADP5520/5501 LEDs Data
-	 */
-
-static struct led_info adp5520_leds[] = {
-	{
-		.name = "adp5520-led1",
-		.default_trigger = "none",
-		.flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
-	},
-};
-
-static struct adp5520_leds_platform_data adp5520_leds_data = {
-	.num_leds = ARRAY_SIZE(adp5520_leds),
-	.leds = adp5520_leds,
-	.fade_in = ADP5520_FADE_T_600ms,
-	.fade_out = ADP5520_FADE_T_600ms,
-	.led_on_time = ADP5520_LED_ONT_600ms,
-};
-
-	/*
-	 *  ADP5520 Keypad Data
-	 */
-
-static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
-	[ADP5520_KEY(3, 3)]	= KEY_1,
-	[ADP5520_KEY(2, 3)]	= KEY_2,
-	[ADP5520_KEY(1, 3)]	= KEY_3,
-	[ADP5520_KEY(0, 3)]	= KEY_UP,
-	[ADP5520_KEY(3, 2)]	= KEY_4,
-	[ADP5520_KEY(2, 2)]	= KEY_5,
-	[ADP5520_KEY(1, 2)]	= KEY_6,
-	[ADP5520_KEY(0, 2)]	= KEY_DOWN,
-	[ADP5520_KEY(3, 1)]	= KEY_7,
-	[ADP5520_KEY(2, 1)]	= KEY_8,
-	[ADP5520_KEY(1, 1)]	= KEY_9,
-	[ADP5520_KEY(0, 1)]	= KEY_DOT,
-	[ADP5520_KEY(3, 0)]	= KEY_BACKSPACE,
-	[ADP5520_KEY(2, 0)]	= KEY_0,
-	[ADP5520_KEY(1, 0)]	= KEY_HELP,
-	[ADP5520_KEY(0, 0)]	= KEY_ENTER,
-};
-
-static struct adp5520_keys_platform_data adp5520_keys_data = {
-	.rows_en_mask	= ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
-	.cols_en_mask	= ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
-	.keymap		= adp5520_keymap,
-	.keymapsize	= ARRAY_SIZE(adp5520_keymap),
-	.repeat		= 0,
-};
-
-	/*
-	 *  ADP5520/5501 Multifunction Device Init Data
-	 */
-
-static struct adp5520_platform_data adp5520_pdev_data = {
-	.leds = &adp5520_leds_data,
-	.keys = &adp5520_keys_data,
-};
-
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-#if IS_ENABLED(CONFIG_INPUT_PCF8574)
-	{
-		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = IRQ_PF8,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
-	{
-		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
-	},
-#endif
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_I2C)
-	{
-		I2C_BOARD_INFO("ad7879", 0x2C),
-		.irq = IRQ_PF8,
-		.platform_data = (void *)&bfin_ad7879_ts_info,
-	},
-#endif
-#if IS_ENABLED(CONFIG_PMIC_ADP5520)
-	{
-		I2C_BOARD_INFO("pmic-adp5520", 0x32),
-		.irq = IRQ_PF9,
-		.platform_data = (void *)&adp5520_pdev_data,
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_SSM2602)
-	{
-		I2C_BOARD_INFO("ssm2602", 0x1b),
-	},
-#endif
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("ad5252", 0x2f),
-	},
-#endif
-#if IS_ENABLED(CONFIG_SND_SOC_ADAU1373)
-	{
-		I2C_BOARD_INFO("adau1373", 0x1A),
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
-	{BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-#include <linux/platform_data/bfin_rotary.h>
-
-static const u16 per_cnt[] = {
-	P_CNT_CUD,
-	P_CNT_CDG,
-	P_CNT_CZM,
-	0
-};
-
-static struct bfin_rotary_platform_data bfin_rotary_data = {
-	/*.rotary_up_key     = KEY_UP,*/
-	/*.rotary_down_key   = KEY_DOWN,*/
-	.rotary_rel_code   = REL_WHEEL,
-	.rotary_button_key = KEY_ENTER,
-	.debounce	   = 10,	/* 0..17 */
-	.mode		   = ROT_QUAD_ENC | ROT_DEBE,
-	.pm_wakeup	   = 1,
-	.pin_list	   = per_cnt,
-};
-
-static struct resource bfin_rotary_resources[] = {
-	{
-		.start = CNT_CONFIG,
-		.end   = CNT_CONFIG + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CNT,
-		.end = IRQ_CNT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_rotary_device = {
-	.name		= "bfin-rotary",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_rotary_resources),
-	.resource 	= bfin_rotary_resources,
-	.dev		= {
-		.platform_data = &bfin_rotary_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_100, 400000000),
-	VRPAIR(VLEV_105, 426000000),
-	VRPAIR(VLEV_110, 500000000),
-	VRPAIR(VLEV_115, 533000000),
-	VRPAIR(VLEV_120, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-static struct platform_device *stamp_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_MTD_NAND_BF5XX)
-	&bf5xx_nand_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_CFPCMCIA)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_ISP1760_HCD)
-	&bfin_isp1760_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
-	&musb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_DM9000)
-	&dm9000_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_MAC)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-	&net2272_bfin_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_T350MCQB)
-	&bf52x_t350mcqb_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_INPUT_BFIN_ROTARY)
-	&bfin_rotary_device,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ezkit_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-	&bfin_ac97_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-	&bfin_ad1836_machine,
-#endif
-};
-
-static int __init ezkit_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(ezkit_init);
-
-static struct platform_device *ezkit_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ezkit_early_devices,
-		ARRAY_SIZE(ezkit_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-int bfin_get_ether_addr(char *addr)
-{
-	/* the MAC is stored in OTP memory page 0xDF */
-	u32 ret;
-	u64 otp_mac;
-	u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
-
-	ret = otp_read(0xDF, 0x00, &otp_mac);
-	if (!(ret & 0x1)) {
-		char *otp_mac_p = (char *)&otp_mac;
-		for (ret = 0; ret < 6; ++ret)
-			addr[ret] = otp_mac_p[5 - ret];
-	}
-	return 0;
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);