summaryrefslogtreecommitdiff
path: root/arch/arm/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 14:42:51 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-02 14:42:51 -0700
commit42daabf62bfa3c00974b43f030dadcf704c0db59 (patch)
tree255f279cad48557227d974d67cbbc8390d057404 /arch/arm/include
parent0bf6a210a43f7118d858806200127e421649fc4e (diff)
parent8c3d913888cfb0066d62831969c3a992f7e4aba5 (diff)
Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
Diffstat (limited to 'arch/arm/include')
-rw-r--r--arch/arm/include/debug/nspire.S28
-rw-r--r--arch/arm/include/debug/sti.S61
2 files changed, 89 insertions, 0 deletions
diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S
new file mode 100644
index 000000000000..886fd276fcbc
--- /dev/null
+++ b/arch/arm/include/debug/nspire.S
@@ -0,0 +1,28 @@
+/*
+ * linux/arch/arm/include/debug/nspire.S
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000
+#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000
+
+.macro addruart, rp, rv, tmp
+ ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address
+ ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address
+.endm
+
+
+#ifdef CONFIG_DEBUG_NSPIRE_CX_UART
+#include <asm/hardware/debug-pl01x.S>
+#endif
+
+#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
+#endif
diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S
new file mode 100644
index 000000000000..e3aa58ff1776
--- /dev/null
+++ b/arch/arm/include/debug/sti.S
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/include/debug/sti.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define STIH41X_COMMS_BASE 0xfed00000
+#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000)
+
+#define STIH41X_SBC_LPM_BASE 0xfe400000
+#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000)
+#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000)
+
+
+#define VIRT_ADDRESS(x) (x - 0x1000000)
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2)
+#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE
+#endif
+
+#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1)
+#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE
+#endif
+
+#ifndef DEBUG_LL_UART_BASE
+#error "DEBUG UART is not Configured"
+#endif
+
+#define ASC_TX_BUF_OFF 0x04
+#define ASC_CTRL_OFF 0x0c
+#define ASC_STA_OFF 0x14
+
+#define ASC_STA_TX_FULL (1<<9)
+#define ASC_STA_TX_EMPTY (1<<1)
+
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =DEBUG_LL_UART_BASE @ physical base
+ ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #ASC_TX_BUF_OFF]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_FULL
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #ASC_STA_OFF]
+ tst \rd, #ASC_STA_TX_EMPTY
+ beq 1001b
+ .endm