Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "A large part of the arm-soc patches are nowadays DT changes, adding
  support for new SoCs, boards and devices without changing kernel
  source.  The plan is still to move the devicetree files out of the
  kernel tree and reduce the amount of churn going on here, but we keep
  finding reasons to delay doing that.

  Changes are really all over the place, with little sticking out
  particularly.  We have contributions from a total of 116 people in
  this branch.

  Unfortunately, the size of this branch also causes a significant
  number of conflicts at the moment, typically when subsystem
  maintainers merge patches that change the driver at the same time as
  the dts files.  In most cases this could be avoided because the dts
  changes are supposed to be compatible in both ways, and we are asking
  everyone to send ARM dts changes through our tree only"

* tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits)
  dts: stmmac: Document the clocks property in the stmmac base document
  dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac.
  ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
  ARM: STi: stih416: Add support for the FSM Serial Flash Controller
  ARM: tegra: fix Dalmore pinctrl configuration
  ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm
  ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND
  ARM: dts: Build all keystone dt blobs
  ARM: dts: keystone: Fix control register range for clktsip
  ARM: dts: keystone: Fix domain register range for clkfftc1
  ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
  ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap
  ARM: dts: bcm21664: Add device tree files.
  ARM: DT: bcm21664: Device tree bindings
  ARM: efm32: properly namespace i2c location property
  ARM: efm32: fix unit address part in USART2 device nodes' names
  ARM: mvebu: Enable NAND controller in Armada 385-DB
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ...

1 files changed, 85 insertions, 188 deletions

diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index d31ce1b4a7b0..804873367669 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,6 +10,7 @@
 #include "skeleton.dtsi"
 #include "vf610-pinfunc.h"
 #include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	aliases {
@@ -87,39 +88,66 @@
 				arm,tag-latency = <2 2 2>;
 			};
 
+			edma0: dma-controller@40018000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40018000 0x2000>,
+					<0x40024000 0x1000>,
+					<0x40025000 0x1000>;
+				interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+						<0 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX0>,
+					<&clks VF610_CLK_DMAMUX1>;
+			};
+
 			uart0: serial@40027000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40027000 0x1000>;
-				interrupts = <0 61 0x00>;
+				interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART0>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 2>,
+					<&edma0 0 3>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart1: serial@40028000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40028000 0x1000>;
-				interrupts = <0 62 0x04>;
+				interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART1>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 4>,
+					<&edma0 0 5>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart2: serial@40029000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x40029000 0x1000>;
-				interrupts = <0 63 0x04>;
+				interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART2>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 6>,
+					<&edma0 0 7>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
 			uart3: serial@4002a000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x4002a000 0x1000>;
-				interrupts = <0 64 0x04>;
+				interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART3>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 8>,
+					<&edma0 0 9>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
@@ -128,7 +156,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-dspi";
 				reg = <0x4002c000 0x1000>;
-				interrupts = <0 67 0x04>;
+				interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_DSPI0>;
 				clock-names = "dspi";
 				spi-num-chipselects = <5>;
@@ -138,20 +166,32 @@
 			sai2: sai@40031000 {
 				compatible = "fsl,vf610-sai";
 				reg = <0x40031000 0x1000>;
-				interrupts = <0 86 0x04>;
+				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_SAI2>;
 				clock-names = "sai";
+				dma-names = "tx", "rx";
+				dmas = <&edma0 0 21>,
+					<&edma0 0 20>;
 				status = "disabled";
 			};
 
 			pit: pit@40037000 {
 				compatible = "fsl,vf610-pit";
 				reg = <0x40037000 0x1000>;
-				interrupts = <0 39 0x04>;
+				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_PIT>;
 				clock-names = "pit";
 			};
 
+			adc0: adc@4003b000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x4003b000 0x1000>;
+				interrupts = <0 53 0x04>;
+				clocks = <&clks VF610_CLK_ADC0>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
 			wdog@4003e000 {
 				compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
 				reg = <0x4003e000 0x1000>;
@@ -164,7 +204,7 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-qspi";
 				reg = <0x40044000 0x1000>;
-				interrupts = <0 24 0x04>;
+				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_QSPI0_EN>,
 					<&clks VF610_CLK_QSPI0>;
 				clock-names = "qspi_en", "qspi";
@@ -175,182 +215,12 @@
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 				#gpio-range-cells = <3>;
-
-				/* functions and groups pins */
-
-				dcu0 {
-					pinctrl_dcu0_1: dcu0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB8__GPIO_30		0x42
-						VF610_PAD_PTE0__DCU0_HSYNC	0x42
-						VF610_PAD_PTE1__DCU0_VSYNC	0x42
-						VF610_PAD_PTE2__DCU0_PCLK	0x42
-						VF610_PAD_PTE4__DCU0_DE		0x42
-						VF610_PAD_PTE5__DCU0_R0		0x42
-						VF610_PAD_PTE6__DCU0_R1		0x42
-						VF610_PAD_PTE7__DCU0_R2		0x42
-						VF610_PAD_PTE8__DCU0_R3		0x42
-						VF610_PAD_PTE9__DCU0_R4		0x42
-						VF610_PAD_PTE10__DCU0_R5	0x42
-						VF610_PAD_PTE11__DCU0_R6	0x42
-						VF610_PAD_PTE12__DCU0_R7	0x42
-						VF610_PAD_PTE13__DCU0_G0	0x42
-						VF610_PAD_PTE14__DCU0_G1	0x42
-						VF610_PAD_PTE15__DCU0_G2	0x42
-						VF610_PAD_PTE16__DCU0_G3	0x42
-						VF610_PAD_PTE17__DCU0_G4	0x42
-						VF610_PAD_PTE18__DCU0_G5	0x42
-						VF610_PAD_PTE19__DCU0_G6	0x42
-						VF610_PAD_PTE20__DCU0_G7	0x42
-						VF610_PAD_PTE21__DCU0_B0	0x42
-						VF610_PAD_PTE22__DCU0_B1	0x42
-						VF610_PAD_PTE23__DCU0_B2	0x42
-						VF610_PAD_PTE24__DCU0_B3	0x42
-						VF610_PAD_PTE25__DCU0_B4	0x42
-						VF610_PAD_PTE26__DCU0_B5	0x42
-						VF610_PAD_PTE27__DCU0_B6	0x42
-						VF610_PAD_PTE28__DCU0_B7	0x42
-						>;
-					};
-				};
-
-				dspi0 {
-					pinctrl_dspi0_1: dspi0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB19__DSPI0_CS0	0x1182
-						VF610_PAD_PTB20__DSPI0_SIN	0x1181
-						VF610_PAD_PTB21__DSPI0_SOUT	0x1182
-						VF610_PAD_PTB22__DSPI0_SCK	0x1182
-						>;
-					};
-				};
-
-				esdhc1 {
-					pinctrl_esdhc1_1: esdhc1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
-						VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
-						VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
-						VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
-						VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
-						VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
-						VF610_PAD_PTA7__GPIO_134	0x219d
-						>;
-					};
-				};
-
-				fec0 {
-					pinctrl_fec0_1: fec0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA6__RMII_CLKIN	0x30d1
-						VF610_PAD_PTC0__ENET_RMII0_MDC	0x30d3
-						VF610_PAD_PTC1__ENET_RMII0_MDIO	0x30d1
-						VF610_PAD_PTC2__ENET_RMII0_CRS	0x30d1
-						VF610_PAD_PTC3__ENET_RMII0_RXD1	0x30d1
-						VF610_PAD_PTC4__ENET_RMII0_RXD0	0x30d1
-						VF610_PAD_PTC5__ENET_RMII0_RXER	0x30d1
-						VF610_PAD_PTC6__ENET_RMII0_TXD1	0x30d2
-						VF610_PAD_PTC7__ENET_RMII0_TXD0	0x30d2
-						VF610_PAD_PTC8__ENET_RMII0_TXEN	0x30d2
-						>;
-					};
-				};
-
-				fec1 {
-					pinctrl_fec1_1: fec1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
-						VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
-						VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-						VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
-						VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
-						VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
-						VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
-						VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
-						VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
-						>;
-					};
-				};
-
-				i2c0 {
-					pinctrl_i2c0_1: i2c0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB14__I2C0_SCL	0x30d3
-						VF610_PAD_PTB15__I2C0_SDA	0x30d3
-						>;
-					};
-				};
-
-				pwm0 {
-					pinctrl_pwm0_1: pwm0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB0__FTM0_CH0	0x1582
-						VF610_PAD_PTB1__FTM0_CH1	0x1582
-						VF610_PAD_PTB2__FTM0_CH2	0x1582
-						VF610_PAD_PTB3__FTM0_CH3	0x1582
-						VF610_PAD_PTB6__FTM0_CH6	0x1582
-						VF610_PAD_PTB7__FTM0_CH7	0x1582
-						>;
-					};
-				};
-
-				qspi0 {
-					pinctrl_qspi0_1: qspi0grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTD0__QSPI0_A_QSCK	0x307b
-						VF610_PAD_PTD1__QSPI0_A_CS0	0x307f
-						VF610_PAD_PTD2__QSPI0_A_DATA3	0x3073
-						VF610_PAD_PTD3__QSPI0_A_DATA2	0x3073
-						VF610_PAD_PTD4__QSPI0_A_DATA1	0x3073
-						VF610_PAD_PTD5__QSPI0_A_DATA0	0x307b
-						VF610_PAD_PTD7__QSPI0_B_QSCK	0x307b
-						VF610_PAD_PTD8__QSPI0_B_CS0	0x307f
-						VF610_PAD_PTD9__QSPI0_B_DATA3	0x3073
-						VF610_PAD_PTD10__QSPI0_B_DATA2	0x3073
-						VF610_PAD_PTD11__QSPI0_B_DATA1	0x3073
-						VF610_PAD_PTD12__QSPI0_B_DATA0	0x307b
-						>;
-					};
-				};
-
-				sai2 {
-					pinctrl_sai2_1: sai2grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA16__SAI2_TX_BCLK	0x02ed
-						VF610_PAD_PTA18__SAI2_TX_DATA	0x02ee
-						VF610_PAD_PTA19__SAI2_TX_SYNC	0x02ed
-						VF610_PAD_PTA21__SAI2_RX_BCLK	0x02ed
-						VF610_PAD_PTA22__SAI2_RX_DATA	0x02ed
-						VF610_PAD_PTA23__SAI2_RX_SYNC	0x02ed
-						VF610_PAD_PTB18__EXT_AUDIO_MCLK	0x02ed
-						>;
-					};
-				};
-
-				uart1 {
-					pinctrl_uart1_1: uart1grp_1 {
-						fsl,pins = <
-						VF610_PAD_PTB4__UART1_TX	0x21a2
-						VF610_PAD_PTB5__UART1_RX	0x21a1
-						>;
-					};
-				};
-
-				usbvbus {
-					pinctrl_usbvbus_1: usbvbusgrp_1 {
-						fsl,pins = <
-						VF610_PAD_PTA24__USB1_VBUS_EN	0x219c
-						VF610_PAD_PTA16__USB0_VBUS_EN	0x219c
-						>;
-					};
-				};
-
 			};
 
 			gpio1: gpio@40049000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x40049000 0x1000 0x400ff000 0x40>;
-				interrupts = <0 107 0x04>;
+				interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -361,7 +231,7 @@
 			gpio2: gpio@4004a000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004a000 0x1000 0x400ff040 0x40>;
-				interrupts = <0 108 0x04>;
+				interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -372,7 +242,7 @@
 			gpio3: gpio@4004b000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004b000 0x1000 0x400ff080 0x40>;
-				interrupts = <0 109 0x04>;
+				interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -383,7 +253,7 @@
 			gpio4: gpio@4004c000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
-				interrupts = <0 110 0x04>;
+				interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -394,7 +264,7 @@
 			gpio5: gpio@4004d000 {
 				compatible = "fsl,vf610-gpio";
 				reg = <0x4004d000 0x1000 0x400ff100 0x40>;
-				interrupts = <0 111 0x04>;
+				interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -412,9 +282,12 @@
 				#size-cells = <0>;
 				compatible = "fsl,vf610-i2c";
 				reg = <0x40066000 0x1000>;
-				interrupts =<0 71 0x04>;
+				interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_I2C0>;
 				clock-names = "ipg";
+				dmas = <&edma0 0 50>,
+					<&edma0 0 51>;
+				dma-names = "rx","tx";
 				status = "disabled";
 			};
 
@@ -432,10 +305,25 @@
 			reg = <0x40080000 0x80000>;
 			ranges;
 
+			edma1: dma-controller@40098000 {
+				#dma-cells = <2>;
+				compatible = "fsl,vf610-edma";
+				reg = <0x40098000 0x2000>,
+					<0x400a1000 0x1000>,
+					<0x400a2000 0x1000>;
+				interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
+						<0 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma-tx", "edma-err";
+				dma-channels = <32>;
+				clock-names = "dmamux0", "dmamux1";
+				clocks = <&clks VF610_CLK_DMAMUX2>,
+					<&clks VF610_CLK_DMAMUX3>;
+			};
+
 			uart4: serial@400a9000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400a9000 0x1000>;
-				interrupts = <0 65 0x04>;
+				interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART4>;
 				clock-names = "ipg";
 				status = "disabled";
@@ -444,16 +332,25 @@
 			uart5: serial@400aa000 {
 				compatible = "fsl,vf610-lpuart";
 				reg = <0x400aa000 0x1000>;
-				interrupts = <0 66 0x04>;
+				interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_UART5>;
 				clock-names = "ipg";
 				status = "disabled";
 			};
 
+			adc1: adc@400bb000 {
+				compatible = "fsl,vf610-adc";
+				reg = <0x400bb000 0x1000>;
+				interrupts = <0 54 0x04>;
+				clocks = <&clks VF610_CLK_ADC1>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
-				interrupts = <0 78 0x04>;
+				interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
@@ -464,7 +361,7 @@
 			fec1: ethernet@400d1000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
-				interrupts = <0 79 0x04>;
+				interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;