Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.7.  Here's the summary of
  the changes:

   - ATH79: Support for DTB passuing using the UHI boot protocol
   - ATH79: Remove support for builtin DTB.
   - ATH79: Add zboot debug serial support.
   - ATH79: Add initial support for Dragino MS14 (Dragine 2), Onion Omega
            and DPT-Module.
   - ATH79: Update devicetree clock support for AR9132 and AR9331.
   - ATH79: Cleanup the DT code.
   - ATH79: Support newer SOCs in ath79_ddr_ctrl_init.
   - ATH79: Fix regression in PCI window initialization.
   - BCM47xx: Move SPROM driver to drivers/firmware/
   - BCM63xx: Enable partition parser in defconfig.
   - BMIPS: BMIPS5000 has I cache filing from D cache
   - BMIPS: BMIPS: Add cpu-feature-overrides.h
   - BMIPS: Add Whirlwind support
   - BMIPS: Adjust mips-hpt-frequency for BCM7435
   - BMIPS: Remove maxcpus from BCM97435SVMB DTS
   - BMIPS: Add missing 7038 L1 register cells to BCM7435
   - BMIPS: Various tweaks to initialization code.
   - BMIPS: Enable partition parser in defconfig.
   - BMIPS: Cache tweaks.
   - BMIPS: Add UART, I2C and SATA devices to DT.
   - BMIPS: Add BCM6358 and BCM63268support
   - BMIPS: Add device tree example for BCM6358.
   - BMIPS: Improve Improve BCM6328 and BCM6368 device trees
   - Lantiq: Add support for device tree file from boot loader
   - Lantiq: Allow build with no built-in DT.
   - Loongson 3: Reserve 32MB for RS780E integrated GPU.
   - Loongson 3: Fix build error after ld-version.sh modification
   - Loongson 3: Move chipset ACPI code from drivers to arch.
   - Loongson 3: Speedup irq processing.
   - Loongson 3: Add basic Loongson 3A support.
   - Loongson 3: Set cache flush handlers to nop.
   - Loongson 3: Invalidate special TLBs when needed.
   - Loongson 3: Fast TLB refill handler.
   - MT7620: Fallback strategy for invalid syscfg0.
   - Netlogic: Fix CP0_EBASE redefinition warnings
   - Octeon: Initialization fixes
   - Octeon: Add DTS files for the D-Link DSR-1000N and EdgeRouter Lite
   - Octeon: Enable add Octeon-drivers in cavium_octeon_defconfig
   - Octeon: Correctly handle endian-swapped initramfs images.
   - Octeon: Support CN73xx, CN75xx and CN78xx.
   - Octeon: Remove dead code from cvmx-sysinfo.
   - Octeon: Extend number of supported CPUs past 32.
   - Octeon: Remove some code limiting NR_IRQS to 255.
   - Octeon: Simplify octeon_irq_ciu_gpio_set_type.
   - Octeon: Mark some functions __init in smp.c
   - Octeon: Octeon: Add Octeon III CN7xxx interface detection
   - PIC32: Add serial driver and bindings for it.
   - PIC32: Add PIC32 deadman timer driver and bindings.
   - PIC32: Add PIC32 clock timer driver and bindings.
   - Pistachio: Determine SoC revision during boot
   - Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER.
   - Sibyte: Strip redundant comments from bcm1480_regs.h.
   - Panic immediately if panic_on_oops is set.
   - module: fix incorrect IS_ERR_VALUE macro usage.
   - module: Make consistent use of pr_*
   - Remove no longer needed work_on_cpu() call.
   - Remove CONFIG_IPV6_PRIVACY from defconfigs.
   - Fix registers of non-crashing CPUs in dumps.
   - Handle MIPSisms in new vmcore_elf32_check_arch.
   - Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.
   - Allow RIXI to be used on non-R2 or R6 cores.
   - Reserve nosave data for hibernation
   - Fix siginfo.h to use strict POSIX types.
   - Don't unwind user mode with EVA.
   - Fix watchpoint restoration
   - Ptrace watchpoints for R6.
   - Sync icache when it fills from dcache
   - I6400 I-cache fills from dcache.
   - Various MSA fixes.
   - Cleanup MIPS_CPU_* definitions.
   - Signal: Move generic copy_siginfo to signal.h
   - Signal: Fix uapi include in exported asm/siginfo.h
   - Timer fixes for sake of KVM.
   - XPA TLB refill fixes.
   - Treat perf counter feature
   - Update John Crispin's email address
   - Add PIC32 watchdog and bindings.
   - Handle R10000 LL/SC bug in set_pte()
   - cpufreq: Various fixes for Longson1.
   - R6: Fix R2 emulation.
   - mathemu: Cosmetic fix to ADDIUPC emulation, plenty of other small fixes
   - ELF: ABI and FP fixes.
   - Allow for relocatable kernel and use that to support KASLR.
   - Fix CPC_BASE_ADDR mask
   - Plenty fo smp-cps, CM, R6 and M6250 fixes.
   - Make reset_control_ops const.
   - Fix kernel command line handling of leading whitespace.
   - Cleanups to cache handling.
   - Add brcm, bcm6345-l1-intc device tree bindings.
   - Use generic clkdev.h header
   - Remove CLK_IS_ROOT usage.
   - Misc small cleanups.
   - CM: Fix compilation error when !MIPS_CM
   - oprofile: Fix a preemption issue
   - Detect DSP ASE v3 support:1"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (275 commits)
  MIPS: pic32mzda: fix getting timer clock rate.
  MIPS: ath79: fix regression in PCI window initialization
  MIPS: ath79: make ath79_ddr_ctrl_init() compatible for newer SoCs
  MIPS: Fix VZ probe gas errors with binutils <2.24
  MIPS: perf: Fix I6400 event numbers
  MIPS: DEC: Export `ioasic_ssr_lock' to modules
  MIPS: MSA: Fix a link error on `_init_msa_upper' with older GCC
  MIPS: CM: Fix compilation error when !MIPS_CM
  MIPS: Fix genvdso error on rebuild
  USB: ohci-jz4740: Remove obsolete driver
  MIPS: JZ4740: Probe OHCI platform device via DT
  MIPS: JZ4740: Qi LB60: Remove support for AVT2 variant
  MIPS: pistachio: Determine SoC revision during boot
  MIPS: BMIPS: Adjust mips-hpt-frequency for BCM7435
  mips: mt7620: fallback to SDRAM when syscfg0 does not have a valid value for the memory type
  MIPS: Prevent "restoration" of MSA context in non-MSA kernels
  MIPS: cevt-r4k: Dynamically calculate min_delta_ns
  MIPS: malta-time: Take seconds into account
  MIPS: malta-time: Start GIC count before syncing to RTC
  MIPS: Force CPUs to lose FP context during mode switches
  ...

8 files changed, 194 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/clock/microchip,pic32.txt b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
new file mode 100644
index 000000000000..c93d88fdd858
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,pic32.txt
@@ -0,0 +1,39 @@
+Microchip PIC32 Clock Controller Binding
+----------------------------------------
+Microchip clock controller is consists of few oscillators, PLL, multiplexer
+and few divider modules.
+
+This binding uses common clock bindings.
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible: shall be "microchip,pic32mzda-clk".
+- reg: shall contain base address and length of clock registers.
+- #clock-cells: shall be 1.
+
+Optional properties:
+- microchip,pic32mzda-sosc: shall be added only if platform has
+  secondary oscillator connected.
+
+Example:
+	rootclk: clock-controller@1f801200 {
+		compatible = "microchip,pic32mzda-clk";
+		reg = <0x1f801200 0x200>;
+		#clock-cells = <1>;
+		/* optional */
+		microchip,pic32mzda-sosc;
+	};
+
+
+The clock consumer shall specify the desired clock-output of the clock
+controller (as defined in [2]) by specifying output-id in its "clock"
+phandle cell.
+[2] include/dt-bindings/clock/microchip,pic32-clock.h
+
+For example for UART2:
+uart2: serial@2 {
+	compatible = "microchip,pic32mzda-uart";
+	reg = <>;
+	interrupts = <>;
+	clocks = <&rootclk PB2CLK>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
new file mode 100644
index 000000000000..4040905388d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -0,0 +1,57 @@
+Broadcom BCM6345-style Level 1 interrupt controller
+
+This block is a first level interrupt controller that is typically connected
+directly to one of the HW INT lines on each CPU.
+
+Key elements of the hardware design include:
+
+- 32, 64 or 128 incoming level IRQ lines
+
+- Most onchip peripherals are wired directly to an L1 input
+
+- A separate instance of the register set for each CPU, allowing individual
+  peripheral IRQs to be routed to any CPU
+
+- Contains one or more enable/status word pairs per CPU
+
+- No atomic set/clear operations
+
+- No polarity/level/edge settings
+
+- No FIFO or priority encoder logic; software is expected to read all
+  2-4 status words to determine which IRQs are pending
+
+Required properties:
+
+- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
+- reg: specifies the base physical address and size of the registers;
+  the number of supported IRQs is inferred from the size argument
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+  source, should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
+  this one is cascaded from
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+  node; valid values depend on the type of parent interrupt controller
+
+If multiple reg ranges and interrupt-parent entries are present on an SMP
+system, the driver will allow IRQ SMP affinity to be set up through the
+/proc/irq/ interface.  In the simplest possible configuration, only one
+reg range and one interrupt-parent is needed.
+
+The driver operates in native CPU endian by default, there is no support for
+specifying an alternative endianness.
+
+Example:
+
+periph_intc: interrupt-controller@10000000 {
+        compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>, <3>;
+};
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt
index 7bab90cc4a7b..4a7e030e4f9b 100644
--- a/Documentation/devicetree/bindings/mips/brcm/soc.txt
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt
@@ -4,7 +4,8 @@ Required properties:
 
 - compatible: "brcm,bcm3384", "brcm,bcm33843"
               "brcm,bcm3384-viper", "brcm,bcm33843-viper"
-              "brcm,bcm6328", "brcm,bcm6368",
+              "brcm,bcm6328", "brcm,bcm6358", "brcm,bcm6368",
+              "brcm,bcm63168", "brcm,bcm63268",
               "brcm,bcm7125", "brcm,bcm7346", "brcm,bcm7358", "brcm,bcm7360",
               "brcm,bcm7362", "brcm,bcm7420", "brcm,bcm7425"
 
diff --git a/Documentation/devicetree/bindings/mips/cavium/ciu3.txt b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt
new file mode 100644
index 000000000000..616862ad2b71
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cavium/ciu3.txt
@@ -0,0 +1,27 @@
+* Central Interrupt Unit v3
+
+Properties:
+- compatible: "cavium,octeon-7890-ciu3"
+
+  Compatibility with 78XX and 73XX SOCs.
+
+- interrupt-controller:  This is an interrupt controller.
+
+- reg: The base address of the CIU's register bank.
+
+- #interrupt-cells: Must be <2>.  The first cell is source number.
+  The second cell indicates the triggering semantics, and may have a
+  value of either 4 for level semantics, or 1 for edge semantics.
+
+Example:
+	interrupt-controller@1010000000000 {
+		compatible = "cavium,octeon-7890-ciu3";
+		interrupt-controller;
+		/* Interrupts are specified by two parts:
+		 * 1) Source number (20 significant bits)
+		 * 2) Trigger type: (4 == level, 1 == edge)
+		 */
+		#address-cells = <0>;
+		#interrupt-cells = <2>;
+		reg = <0x10100 0x00000000 0x0 0xb0000000>;
+	};
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
new file mode 100644
index 000000000000..65b38bf60ae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -0,0 +1,29 @@
+* Microchip Universal Asynchronous Receiver Transmitter (UART)
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-uart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- clocks: Phandle to the clock.
+          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
+             See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+Optional properties:
+- cts-gpios: CTS pin for UART
+
+Example:
+	uart1: serial@1f822000 {
+		compatible = "microchip,pic32mzda-uart";
+		reg = <0x1f822000 0x50>;
+		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+			<113 IRQ_TYPE_LEVEL_HIGH>,
+			<114 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&PBCLK2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart1
+				&pinctrl_uart1_cts
+				&pinctrl_uart1_rts>;
+		cts-gpios = <&gpio1 15 0>;
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 021bbe7866e0..316412dc7913 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -72,6 +72,8 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+dptechnics	DPTechnics
+dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
 ebv	EBV Elektronik
 edt	Emerging Display Technologies
@@ -176,6 +178,7 @@ nvidia	NVIDIA
 nxp	NXP Semiconductors
 okaya	Okaya Electric America, Inc.
 olimex	OLIMEX Ltd.
+onion	Onion Corporation
 onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 option	Option NV
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
new file mode 100644
index 000000000000..852f694f3177
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-dmt.txt
@@ -0,0 +1,19 @@
+* Microchip PIC32 Deadman Timer
+
+The deadman timer is used to reset the processor in the event of a software
+malfunction. It is a free-running instruction fetch timer, which is clocked
+whenever an instruction fetch occurs until a count match occurs.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-dmt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of parent clock (should be &PBCLK7).
+
+Example:
+
+	watchdog@1f800a00 {
+		compatible = "microchip,pic32mzda-dmt";
+		reg = <0x1f800a00 0x80>;
+		clocks = <&PBCLK7>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
new file mode 100644
index 000000000000..d1401030e75c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt
@@ -0,0 +1,18 @@
+* Microchip PIC32 Watchdog Timer
+
+When enabled, the watchdog peripheral can be used to reset the device if the
+WDT is not cleared periodically in software.
+
+Required properties:
+- compatible: must be "microchip,pic32mzda-wdt".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks: phandle of source clk. should be <&LPRC> clk.
+
+Example:
+
+	watchdog@1f800800 {
+		compatible = "microchip,pic32mzda-wdt";
+		reg = <0x1f800800 0x200>;
+		clocks = <&LPRC>;
+	};