ALSA: doc: ReSTize Audigy-mixer.txt

Another simple conversion from a plain text file.
Put to cards subdirectory.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

2 files changed, 370 insertions, 0 deletions

diff --git a/Documentation/sound/cards/audigy-mixer.rst b/Documentation/sound/cards/audigy-mixer.rst
new file mode 100644
index 000000000000..86213234435f
--- /dev/null
+++ b/Documentation/sound/cards/audigy-mixer.rst
@@ -0,0 +1,368 @@
+=============================================
+Sound Blaster Audigy mixer / default DSP code
+=============================================
+
+This is based on sb-live-mixer.rst.
+
+The EMU10K2 chips have a DSP part which can be programmed to support 
+various ways of sample processing, which is described here.
+(This article does not deal with the overall functionality of the 
+EMU10K2 chips. See the manuals section for further details.)
+
+The ALSA driver programs this portion of chip by default code
+(can be altered later) which offers the following functionality:
+
+
+Digital mixer controls
+======================
+
+These controls are built using the DSP instructions. They offer extended
+functionality. Only the default build-in code in the ALSA driver is described
+here. Note that the controls work as attenuators: the maximum value is the 
+neutral position leaving the signal unchanged. Note that if the  same destination 
+is mentioned in multiple controls, the signal is accumulated and can be wrapped 
+(set to maximal or minimal value without checking of overflow).
+
+
+Explanation of used abbreviations:
+
+DAC
+	digital to analog converter
+ADC
+	analog to digital converter
+I2S
+	one-way three wire serial bus for digital sound by Philips Semiconductors
+        (this standard is used for connecting standalone DAC and ADC converters)
+LFE
+	low frequency effects (subwoofer signal)
+AC97
+	a chip containing an analog mixer, DAC and ADC converters
+IEC958
+	S/PDIF
+FX-bus
+	the EMU10K2 chip has an effect bus containing 64 accumulators.
+        Each of the synthesizer voices can feed its output to these accumulators
+        and the DSP microcontroller can operate with the resulting sum.
+
+name='PCM Front Playback Volume',index=0
+----------------------------------------
+This control is used to attenuate samples for left and right front PCM FX-bus
+accumulators. ALSA uses accumulators 8 and 9 for left and right front PCM 
+samples for 5.1 playback. The result samples are forwarded to the front DAC PCM 
+slots of the Philips DAC.
+
+name='PCM Surround Playback Volume',index=0
+-------------------------------------------
+This control is used to attenuate samples for left and right surround PCM FX-bus
+accumulators. ALSA uses accumulators 2 and 3 for left and right surround PCM 
+samples for 5.1 playback. The result samples are forwarded to the surround DAC PCM 
+slots of the Philips DAC.
+
+name='PCM Center Playback Volume',index=0
+-----------------------------------------
+This control is used to attenuate samples for center PCM FX-bus accumulator.
+ALSA uses accumulator 6 for center PCM sample for 5.1 playback. The result sample
+is forwarded to the center DAC PCM slot of the Philips DAC.
+
+name='PCM LFE Playback Volume',index=0
+--------------------------------------
+This control is used to attenuate sample for LFE PCM FX-bus accumulator. 
+ALSA uses accumulator 7 for LFE PCM sample for 5.1 playback. The result sample 
+is forwarded to the LFE DAC PCM slot of the Philips DAC.
+
+name='PCM Playback Volume',index=0
+----------------------------------
+This control is used to attenuate samples for left and right PCM FX-bus
+accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples for
+stereo playback. The result samples are forwarded to the front DAC PCM slots 
+of the Philips DAC.
+
+name='PCM Capture Volume',index=0
+---------------------------------
+This control is used to attenuate samples for left and right PCM FX-bus
+accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
+The result is forwarded to the ADC capture FIFO (thus to the standard capture
+PCM device).
+
+name='Music Playback Volume',index=0
+------------------------------------
+This control is used to attenuate samples for left and right MIDI FX-bus
+accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
+The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
+
+name='Music Capture Volume',index=0
+-----------------------------------
+These controls are used to attenuate samples for left and right MIDI FX-bus
+accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
+The result is forwarded to the ADC capture FIFO (thus to the standard capture
+PCM device).
+
+name='Mic Playback Volume',index=0
+----------------------------------
+This control is used to attenuate samples for left and right Mic input.
+For Mic input is used AC97 codec. The result samples are forwarded to 
+the front DAC PCM slots of the Philips DAC. Samples are forwarded to Mic
+capture FIFO (device 1 - 16bit/8KHz mono) too without volume control.
+
+name='Mic Capture Volume',index=0
+---------------------------------
+This control is used to attenuate samples for left and right Mic input.
+The result is forwarded to the ADC capture FIFO (thus to the standard capture
+PCM device).
+
+name='Audigy CD Playback Volume',index=0
+----------------------------------------
+This control is used to attenuate samples from left and right IEC958 TTL
+digital inputs (usually used by a CDROM drive). The result samples are
+forwarded to the front DAC PCM slots of the Philips DAC.
+
+name='Audigy CD Capture Volume',index=0
+---------------------------------------
+This control is used to attenuate samples from left and right IEC958 TTL
+digital inputs (usually used by a CDROM drive). The result samples are
+forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
+
+name='IEC958 Optical Playback Volume',index=0
+---------------------------------------------
+This control is used to attenuate samples from left and right IEC958 optical
+digital input. The result samples are forwarded to the front DAC PCM slots
+of the Philips DAC.
+
+name='IEC958 Optical Capture Volume',index=0
+--------------------------------------------
+This control is used to attenuate samples from left and right IEC958 optical
+digital inputs. The result samples are forwarded to the ADC capture FIFO
+(thus to the standard capture PCM device).
+
+name='Line2 Playback Volume',index=0
+------------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs (on the AudigyDrive). The result samples are forwarded to the front
+DAC PCM slots of the Philips DAC.
+
+name='Line2 Capture Volume',index=1
+-----------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs (on the AudigyDrive). The result samples are forwarded to the ADC
+capture FIFO (thus to the standard capture PCM device).
+
+name='Analog Mix Playback Volume',index=0
+-----------------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs from Philips ADC. The result samples are forwarded to the front
+DAC PCM slots of the Philips DAC. This contains mix from analog sources
+like CD, Line In, Aux, ....
+
+name='Analog Mix Capture Volume',index=1
+----------------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs Philips ADC. The result samples are forwarded to the ADC
+capture FIFO (thus to the standard capture PCM device).
+
+name='Aux2 Playback Volume',index=0
+-----------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs (on the AudigyDrive). The result samples are forwarded to the front
+DAC PCM slots of the Philips DAC.
+
+name='Aux2 Capture Volume',index=1
+----------------------------------
+This control is used to attenuate samples from left and right I2S ADC
+inputs (on the AudigyDrive). The result samples are forwarded to the ADC
+capture FIFO (thus to the standard capture PCM device).
+
+name='Front Playback Volume',index=0
+------------------------------------
+All stereo signals are mixed together and mirrored to surround, center and LFE.
+This control is used to attenuate samples for left and right front speakers of
+this mix.
+
+name='Surround Playback Volume',index=0
+---------------------------------------
+All stereo signals are mixed together and mirrored to surround, center and LFE.
+This control is used to attenuate samples for left and right surround speakers of
+this mix.
+
+name='Center Playback Volume',index=0
+-------------------------------------
+All stereo signals are mixed together and mirrored to surround, center and LFE.
+This control is used to attenuate sample for center speaker of this mix.
+
+name='LFE Playback Volume',index=0
+----------------------------------
+All stereo signals are mixed together and mirrored to surround, center and LFE.
+This control is used to attenuate sample for LFE speaker of this mix.
+
+name='Tone Control - Switch',index=0
+------------------------------------
+This control turns the tone control on or off. The samples for front, rear
+and center / LFE outputs are affected.
+
+name='Tone Control - Bass',index=0
+----------------------------------
+This control sets the bass intensity. There is no neutral value!!
+When the tone control code is activated, the samples are always modified.
+The closest value to pure signal is 20.
+
+name='Tone Control - Treble',index=0
+------------------------------------
+This control sets the treble intensity. There is no neutral value!!
+When the tone control code is activated, the samples are always modified.
+The closest value to pure signal is 20.
+
+name='Master Playback Volume',index=0
+-------------------------------------
+This control is used to attenuate samples for front, surround, center and 
+LFE outputs.
+
+name='IEC958 Optical Raw Playback Switch',index=0
+-------------------------------------------------
+If this switch is on, then the samples for the IEC958 (S/PDIF) digital
+output are taken only from the raw FX8010 PCM, otherwise standard front
+PCM samples are taken.
+
+
+PCM stream related controls
+===========================
+
+name='EMU10K1 PCM Volume',index 0-31
+------------------------------------
+Channel volume attenuation in range 0-0xffff. The maximum value (no
+attenuation) is default. The channel mapping for three values is
+as follows:
+
+* 0 - mono, default 0xffff (no attenuation)
+* 1 - left, default 0xffff (no attenuation)
+* 2 - right, default 0xffff (no attenuation)
+
+name='EMU10K1 PCM Send Routing',index 0-31
+------------------------------------------
+This control specifies the destination - FX-bus accumulators. There 24
+values with this mapping:
+
+* 0 -  mono, A destination (FX-bus 0-63), default 0
+* 1 -  mono, B destination (FX-bus 0-63), default 1
+* 2 -  mono, C destination (FX-bus 0-63), default 2
+* 3 -  mono, D destination (FX-bus 0-63), default 3
+* 4 -  mono, E destination (FX-bus 0-63), default 0
+* 5 -  mono, F destination (FX-bus 0-63), default 0
+* 6 -  mono, G destination (FX-bus 0-63), default 0
+* 7 -  mono, H destination (FX-bus 0-63), default 0
+* 8 -  left, A destination (FX-bus 0-63), default 0
+* 9 -  left, B destination (FX-bus 0-63), default 1
+* 10 -  left, C destination (FX-bus 0-63), default 2
+* 11 -  left, D destination (FX-bus 0-63), default 3
+* 12 -  left, E destination (FX-bus 0-63), default 0
+* 13 -  left, F destination (FX-bus 0-63), default 0
+* 14 -  left, G destination (FX-bus 0-63), default 0
+* 15 -  left, H destination (FX-bus 0-63), default 0
+* 16 - right, A destination (FX-bus 0-63), default 0
+* 17 - right, B destination (FX-bus 0-63), default 1
+* 18 - right, C destination (FX-bus 0-63), default 2
+* 19 - right, D destination (FX-bus 0-63), default 3
+* 20 - right, E destination (FX-bus 0-63), default 0
+* 21 - right, F destination (FX-bus 0-63), default 0
+* 22 - right, G destination (FX-bus 0-63), default 0
+* 23 - right, H destination (FX-bus 0-63), default 0
+
+Don't forget that it's illegal to assign a channel to the same FX-bus accumulator 
+more than once (it means 0=0 && 1=0 is an invalid combination).
+ 
+name='EMU10K1 PCM Send Volume',index 0-31
+-----------------------------------------
+It specifies the attenuation (amount) for given destination in range 0-255.
+The channel mapping is following:
+
+*  0 -  mono, A destination attn, default 255 (no attenuation)
+*  1 -  mono, B destination attn, default 255 (no attenuation)
+*  2 -  mono, C destination attn, default 0 (mute)
+*  3 -  mono, D destination attn, default 0 (mute)
+*  4 -  mono, E destination attn, default 0 (mute)
+*  5 -  mono, F destination attn, default 0 (mute)
+*  6 -  mono, G destination attn, default 0 (mute)
+*  7 -  mono, H destination attn, default 0 (mute)
+*  8 -  left, A destination attn, default 255 (no attenuation)
+*  9 -  left, B destination attn, default 0 (mute)
+* 10 -  left, C destination attn, default 0 (mute)
+* 11 -  left, D destination attn, default 0 (mute)
+* 12 -  left, E destination attn, default 0 (mute)
+* 13 -  left, F destination attn, default 0 (mute)
+* 14 -  left, G destination attn, default 0 (mute)
+* 15 -  left, H destination attn, default 0 (mute)
+* 16 - right, A destination attn, default 0 (mute)
+* 17 - right, B destination attn, default 255 (no attenuation)
+* 18 - right, C destination attn, default 0 (mute)
+* 19 - right, D destination attn, default 0 (mute)
+* 20 - right, E destination attn, default 0 (mute)
+* 21 - right, F destination attn, default 0 (mute)
+* 22 - right, G destination attn, default 0 (mute)
+* 23 - right, H destination attn, default 0 (mute)
+
+
+
+MANUALS/PATENTS
+===============
+
+ftp://opensource.creative.com/pub/doc
+-------------------------------------
+
+LM4545.pdf
+	AC97 Codec
+
+m2049.pdf
+	The EMU10K1 Digital Audio Processor
+
+hog63.ps
+	FX8010 - A DSP Chip Architecture for Audio Effects
+
+
+WIPO Patents
+------------
+
+WO 9901813 (A1)
+	Audio Effects Processor with multiple asynchronous streams
+	(Jan. 14, 1999)
+
+WO 9901814 (A1)
+	Processor with Instruction Set for Audio Effects (Jan. 14, 1999)
+
+WO 9901953 (A1)
+	Audio Effects Processor having Decoupled Instruction
+        Execution and Audio Data Sequencing (Jan. 14, 1999)
+
+
+US Patents (http://www.uspto.gov/)
+----------------------------------
+
+US 5925841
+	Digital Sampling Instrument employing cache memory (Jul. 20, 1999)
+
+US 5928342
+	Audio Effects Processor integrated on a single chip
+        with a multiport memory onto which multiple asynchronous
+        digital sound samples can be concurrently loaded
+	(Jul. 27, 1999)
+
+US 5930158
+	Processor with Instruction Set for Audio Effects (Jul. 27, 1999)
+
+US 6032235
+	Memory initialization circuit (Tram) (Feb. 29, 2000)
+
+US 6138207
+	Interpolation looping of audio samples in cache connected to
+        system bus with prioritization and modification of bus transfers
+        in accordance with loop ends and minimum block sizes
+	(Oct. 24, 2000)
+
+US 6151670
+	Method for conserving memory storage using a
+        pool of  short term memory registers
+	(Nov. 21, 2000)
+
+US 6195715
+	Interrupt control for multiple programs communicating with
+        a common interrupt by associating programs to GP registers,
+        defining interrupt register, polling GP registers, and invoking
+        callback routine associated with defined interrupt register
+	(Feb. 27, 2001)
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst
index 294efdb75bc9..c9d7ce4286b2 100644
--- a/Documentation/sound/cards/index.rst
+++ b/Documentation/sound/cards/index.rst
@@ -7,3 +7,5 @@ Card-Specific Information
    joystick
    cmipci
    sb-live-mixer
+   audigy-mixer
+