Merge tag 'omap-for-v4.19/dt-mcan-v2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

dts changes for mcan for omaps for v4.19 merge window

These changes configure the mcan clock, interconnect target
module and mcan device. These changes depend on the ti-sysc
related driver changes and are based on those.

Notably this is the first new driver that probes with ti-sysc
driver with no legacy hwmod platform data for the interconnect
target module.

* tag 'omap-for-v4.19/dt-mcan-v2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra76x: Add MCAN node
  ARM: dts: Add generic interconnect target module node for MCAN
  ARM: dts: dra762: Add MCAN clock support
  bus: ti-sysc: Add support for software reset
  bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
  clk: ti: dra7: Add clkctrl clock data for the mcan clocks
  bus: ti-sysc: Use 2-factor allocator arguments

Signed-off-by: Olof Johansson <olof@lixom.net>

8 files changed, 144 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index d8ed5b780ed9..91dc2333af01 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -36,6 +36,7 @@ Required standard properties:
 		"ti,sysc-omap-aes"
 		"ti,sysc-mcasp"
 		"ti,sysc-usb-host-fs"
+		"ti,sysc-dra7-mcan"
 
 - reg		shall have register areas implemented for the interconnect
 		target module in question such as revision, sysc and syss
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index f983cfd1cb85..5a46163d465f 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -444,3 +444,9 @@
 &extcon_usb2 {
 	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
+
+&m_can0 {
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 1c88c581ff18..613e4dc0ed3e 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -11,9 +11,73 @@
 / {
 	compatible = "ti,dra762", "ti,dra7";
 
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+
+			m_can0: mcan@1a00 {
+				compatible = "bosch,m_can";
+				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+				reg-names = "m_can", "message_ram";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0", "int1";
+				clocks = <&mcan_clk>, <&l3_iclk_div>;
+				clock-names = "cclk", "hclk";
+				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+			};
+		};
+	};
+
 };
 
 /* MCAN interrupts are hard-wired to irqs 67, 68 */
 &crossbar_mpu {
 	ti,irqs-skip = <10 67 68 133 139 140>;
 };
+
+&scm_conf_clocks {
+	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x03fc>;
+		ti,bit-shift=<20>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+		assigned-clock-rates = <80000000>;
+	};
+
+	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+		reg = <0x3fc>;
+		ti,bit-shift = <29>;
+		ti,latch-bit=<26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+	};
+
+	mcan_clk: mcan_clk@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x3fc>;
+	};
+};
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 1cc29629d238..c9bac9dc4637 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -23,11 +23,14 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
+#include <linux/iopoll.h>
 
 #include <linux/platform_data/ti-sysc.h>
 
 #include <dt-bindings/bus/ti-sysc.h>
 
+#define MAX_MODULE_SOFTRESET_WAIT		10000
+
 static const char * const reg_names[] = { "rev", "sysc", "syss", };
 
 enum sysc_clocks {
@@ -88,6 +91,11 @@ struct sysc {
 	struct delayed_work idle_work;
 };
 
+void sysc_write(struct sysc *ddata, int offset, u32 value)
+{
+	writel_relaxed(value, ddata->module_va + offset);
+}
+
 static u32 sysc_read(struct sysc *ddata, int offset)
 {
 	if (ddata->cfg.quirks & SYSC_QUIRK_16BIT) {
@@ -169,9 +177,9 @@ static int sysc_get_clocks(struct sysc *ddata)
 	const char *name;
 	int nr_fck = 0, nr_ick = 0, i, error = 0;
 
-	ddata->clock_roles = devm_kzalloc(ddata->dev,
-					  sizeof(*ddata->clock_roles) *
+	ddata->clock_roles = devm_kcalloc(ddata->dev,
 					  SYSC_MAX_CLOCKS,
+					  sizeof(*ddata->clock_roles),
 					  GFP_KERNEL);
 	if (!ddata->clock_roles)
 		return -ENOMEM;
@@ -200,8 +208,8 @@ static int sysc_get_clocks(struct sysc *ddata)
 		return -EINVAL;
 	}
 
-	ddata->clocks = devm_kzalloc(ddata->dev,
-				     sizeof(*ddata->clocks) * ddata->nr_clocks,
+	ddata->clocks = devm_kcalloc(ddata->dev,
+				     ddata->nr_clocks, sizeof(*ddata->clocks),
 				     GFP_KERNEL);
 	if (!ddata->clocks)
 		return -ENOMEM;
@@ -943,6 +951,36 @@ static void sysc_init_revision_quirks(struct sysc *ddata)
 	}
 }
 
+static int sysc_reset(struct sysc *ddata)
+{
+	int offset = ddata->offsets[SYSC_SYSCONFIG];
+	int val;
+
+	if (ddata->legacy_mode || offset < 0 ||
+	    ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
+		return 0;
+
+	/*
+	 * Currently only support reset status in sysstatus.
+	 * Warn and return error in all other cases
+	 */
+	if (!ddata->cfg.syss_mask) {
+		dev_err(ddata->dev, "No ti,syss-mask. Reset failed\n");
+		return -EINVAL;
+	}
+
+	val = sysc_read(ddata, offset);
+	val |= (0x1 << ddata->cap->regbits->srst_shift);
+	sysc_write(ddata, offset, val);
+
+	/* Poll on reset status */
+	offset = ddata->offsets[SYSC_SYSSTATUS];
+
+	return readl_poll_timeout(ddata->module_va + offset, val,
+				  (val & ddata->cfg.syss_mask) == 0x0,
+				  100, MAX_MODULE_SOFTRESET_WAIT);
+}
+
 /* At this point the module is configured enough to read the revision */
 static int sysc_init_module(struct sysc *ddata)
 {
@@ -960,6 +998,14 @@ static int sysc_init_module(struct sysc *ddata)
 		return 0;
 	}
 
+	error = sysc_reset(ddata);
+	if (error) {
+		dev_err(ddata->dev, "Reset failed with %d\n", error);
+		pm_runtime_put_sync(ddata->dev);
+
+		return error;
+	}
+
 	ddata->revision = sysc_read_revision(ddata);
 	pm_runtime_put_sync(ddata->dev);
 
@@ -1552,6 +1598,23 @@ static const struct sysc_capabilities sysc_omap4_usb_host_fs = {
 	.regbits = &sysc_regbits_omap4_usb_host_fs,
 };
 
+static const struct sysc_regbits sysc_regbits_dra7_mcan = {
+	.dmadisable_shift = -ENODEV,
+	.midle_shift = -ENODEV,
+	.sidle_shift = -ENODEV,
+	.clkact_shift = -ENODEV,
+	.enwkup_shift = 4,
+	.srst_shift = 0,
+	.emufree_shift = -ENODEV,
+	.autoidle_shift = -ENODEV,
+};
+
+static const struct sysc_capabilities sysc_dra7_mcan = {
+	.type = TI_SYSC_DRA7_MCAN,
+	.sysc_mask = SYSC_DRA7_MCAN_ENAWAKEUP | SYSC_OMAP4_SOFTRESET,
+	.regbits = &sysc_regbits_dra7_mcan,
+};
+
 static int sysc_init_pdata(struct sysc *ddata)
 {
 	struct ti_sysc_platform_data *pdata = dev_get_platdata(ddata->dev);
@@ -1743,6 +1806,7 @@ static const struct of_device_id sysc_match[] = {
 	{ .compatible = "ti,sysc-mcasp", .data = &sysc_omap4_mcasp, },
 	{ .compatible = "ti,sysc-usb-host-fs",
 	  .data = &sysc_omap4_usb_host_fs, },
+	{ .compatible = "ti,sysc-dra7-mcan", .data = &sysc_dra7_mcan, },
 	{  },
 };
 MODULE_DEVICE_TABLE(of, sysc_match);
diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c
index fb249a1637a5..71a122b2dc67 100644
--- a/drivers/clk/ti/clk-7xx.c
+++ b/drivers/clk/ti/clk-7xx.c
@@ -708,6 +708,7 @@ static const struct omap_clkctrl_reg_data dra7_wkupaon_clkctrl_regs[] __initcons
 	{ DRA7_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" },
 	{ DRA7_UART10_CLKCTRL, dra7_uart10_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0060:24" },
 	{ DRA7_DCAN1_CLKCTRL, dra7_dcan1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0068:24" },
+	{ DRA7_ADC_CLKCTRL, NULL, CLKF_SW_SUP, "mcan_clk"},
 	{ 0 },
 };
 
diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h
index 2c005376ac0e..7138384e2ef9 100644
--- a/include/dt-bindings/bus/ti-sysc.h
+++ b/include/dt-bindings/bus/ti-sysc.h
@@ -15,6 +15,8 @@
 /* SmartReflex sysc found on 36xx and later */
 #define SYSC_OMAP3_SR_ENAWAKEUP		(1 << 26)
 
+#define SYSC_DRA7_MCAN_ENAWAKEUP	(1 << 4)
+
 /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */
 #define SYSC_IDLE_FORCE			0
 #define SYSC_IDLE_NO			1
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index 5e1061b15aed..d7549c57cac3 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -168,5 +168,6 @@
 #define DRA7_COUNTER_32K_CLKCTRL	DRA7_CLKCTRL_INDEX(0x50)
 #define DRA7_UART10_CLKCTRL	DRA7_CLKCTRL_INDEX(0x80)
 #define DRA7_DCAN1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x88)
+#define DRA7_ADC_CLKCTRL	DRA7_CLKCTRL_INDEX(0xa0)
 
 #endif
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 990aad477458..2efa3470a451 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -14,6 +14,7 @@ enum ti_sysc_module_type {
 	TI_SYSC_OMAP4_SR,
 	TI_SYSC_OMAP4_MCASP,
 	TI_SYSC_OMAP4_USB_HOST_FS,
+	TI_SYSC_DRA7_MCAN,
 };
 
 struct ti_sysc_cookie {