summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYaniv Rosner <yaniv.rosner@broadcom.com>2010-09-07 11:41:20 +0000
committerDavid S. Miller <davem@davemloft.net>2010-09-07 13:15:42 -0700
commita22f078867ef362e35c54055878168e6613ff743 (patch)
tree2cf683f3057b7ed5dcaaaad16192f3a267dcf0f8
parentde6eae1f42eae736548f293570fd867bd37c3bdd (diff)
bnx2x: Add dual-media changes
Add required changes in order to support dual-media boards. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--drivers/net/bnx2x/bnx2x.h10
-rw-r--r--drivers/net/bnx2x/bnx2x_cmn.c14
-rw-r--r--drivers/net/bnx2x/bnx2x_cmn.h3
-rw-r--r--drivers/net/bnx2x/bnx2x_ethtool.c176
-rw-r--r--drivers/net/bnx2x/bnx2x_hsi.h111
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c695
-rw-r--r--drivers/net/bnx2x/bnx2x_link.h62
-rw-r--r--drivers/net/bnx2x/bnx2x_main.c354
-rw-r--r--drivers/net/bnx2x/bnx2x_reg.h25
9 files changed, 1074 insertions, 376 deletions
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index a019c67d2995..137187684f27 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -566,13 +566,13 @@ struct bnx2x_common {
struct bnx2x_port {
u32 pmf;
- u32 link_config;
+ u32 link_config[LINK_CONFIG_SIZE];
- u32 supported;
+ u32 supported[LINK_CONFIG_SIZE];
/* link settings - missing defines */
#define SUPPORTED_2500baseX_Full (1 << 15)
- u32 advertising;
+ u32 advertising[LINK_CONFIG_SIZE];
/* link settings - missing defines */
#define ADVERTISED_2500baseX_Full (1 << 15)
@@ -931,7 +931,7 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
int bnx2x_get_gpio(struct bnx2x *bp, int gpio_num, u8 port);
int bnx2x_set_gpio(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
int bnx2x_set_gpio_int(struct bnx2x *bp, int gpio_num, u32 mode, u8 port);
-u32 bnx2x_fw_command(struct bnx2x *bp, u32 command);
+u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param);
void bnx2x_reg_wr_ind(struct bnx2x *bp, u32 addr, u32 val);
void bnx2x_write_dmae_phys_len(struct bnx2x *bp, dma_addr_t phys_addr,
u32 addr, u32 len);
@@ -939,7 +939,7 @@ void bnx2x_calc_fc_adv(struct bnx2x *bp);
int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
u32 data_hi, u32 data_lo, int common);
void bnx2x_update_coalesce(struct bnx2x *bp);
-
+int bnx2x_get_link_cfg_idx(struct bnx2x *bp);
static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
int wait)
{
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 0e4caf411905..7f1d291eaaa5 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -1283,7 +1283,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
common blocks should be initialized, otherwise - not
*/
if (!BP_NOMCP(bp)) {
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0);
if (!load_code) {
BNX2X_ERR("MCP response failure, aborting\n");
rc = -EBUSY;
@@ -1322,9 +1322,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
rc = bnx2x_init_hw(bp, load_code);
if (rc) {
BNX2X_ERR("HW init failed, aborting\n");
- bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
goto load_error2;
}
@@ -1339,7 +1339,7 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
/* Send LOAD_DONE command to MCP */
if (!BP_NOMCP(bp)) {
- load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE);
+ load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0);
if (!load_code) {
BNX2X_ERR("MCP response failure, aborting\n");
rc = -EBUSY;
@@ -1455,8 +1455,8 @@ load_error4:
load_error3:
bnx2x_int_disable_sync(bp, 1);
if (!BP_NOMCP(bp)) {
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
}
bp->port.pmf = 0;
/* Free SKBs, SGEs, TPA pool and driver internals */
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 32543c32805c..d1e6a8c977d1 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -49,10 +49,11 @@ void bnx2x_link_set(struct bnx2x *bp);
* Query link status
*
* @param bp
+ * @param is_serdes
*
* @return 0 - link is UP
*/
-u8 bnx2x_link_test(struct bnx2x *bp);
+u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes);
/**
* Handles link status change
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index dbcfa7a5618f..d058f9716785 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -29,9 +29,12 @@
static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2x *bp = netdev_priv(dev);
-
- cmd->supported = bp->port.supported;
- cmd->advertising = bp->port.advertising;
+ int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+ /* Dual Media boards present all available port types */
+ cmd->supported = bp->port.supported[cfg_idx] |
+ (bp->port.supported[cfg_idx ^ 1] &
+ (SUPPORTED_TP | SUPPORTED_FIBRE));
+ cmd->advertising = bp->port.advertising[cfg_idx];
if ((bp->state == BNX2X_STATE_OPEN) &&
!(bp->flags & MF_FUNC_DIS) &&
@@ -48,22 +51,21 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->speed = vn_max_rate;
}
} else {
- cmd->speed = -1;
- cmd->duplex = -1;
+ cmd->speed = bp->link_params.req_line_speed[cfg_idx];
+ cmd->duplex = bp->link_params.req_duplex[cfg_idx];
}
- if (bp->link_params.num_phys > 0) {
- if (bp->link_params.phy[bp->link_params.num_phys - 1].
- supported & SUPPORTED_FIBRE)
- cmd->port = PORT_FIBRE;
- else
- cmd->port = PORT_TP;
- } else
- DP(NETIF_MSG_LINK, "No media found\n");
+ if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
+ cmd->port = PORT_TP;
+ else if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
+ cmd->port = PORT_FIBRE;
+ else
+ BNX2X_ERR("XGXS PHY Failure detected\n");
+
cmd->phy_address = bp->mdio.prtad;
cmd->transceiver = XCVR_INTERNAL;
- if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
+ if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG)
cmd->autoneg = AUTONEG_ENABLE;
else
cmd->autoneg = AUTONEG_DISABLE;
@@ -85,7 +87,7 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2x *bp = netdev_priv(dev);
- u32 advertising;
+ u32 advertising, cfg_idx, old_multi_phy_config, new_multi_phy_config;
if (IS_E1HMF(bp))
return 0;
@@ -98,26 +100,81 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
+ cfg_idx = bnx2x_get_link_cfg_idx(bp);
+ old_multi_phy_config = bp->link_params.multi_phy_config;
+ switch (cmd->port) {
+ case PORT_TP:
+ if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
+ break; /* no port change */
+
+ if (!(bp->port.supported[0] & SUPPORTED_TP ||
+ bp->port.supported[1] & SUPPORTED_TP)) {
+ DP(NETIF_MSG_LINK, "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ break;
+ case PORT_FIBRE:
+ if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
+ break; /* no port change */
+
+ if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
+ bp->port.supported[1] & SUPPORTED_FIBRE)) {
+ DP(NETIF_MSG_LINK, "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ break;
+ default:
+ DP(NETIF_MSG_LINK, "Unsupported port type\n");
+ return -EINVAL;
+ }
+ /* Save new config in case command complete successuly */
+ new_multi_phy_config = bp->link_params.multi_phy_config;
+ /* Get the new cfg_idx */
+ cfg_idx = bnx2x_get_link_cfg_idx(bp);
+ /* Restore old config in case command failed */
+ bp->link_params.multi_phy_config = old_multi_phy_config;
+ DP(NETIF_MSG_LINK, "cfg_idx = %x\n", cfg_idx);
+
if (cmd->autoneg == AUTONEG_ENABLE) {
- if (!(bp->port.supported & SUPPORTED_Autoneg)) {
+ if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) {
DP(NETIF_MSG_LINK, "Autoneg not supported\n");
return -EINVAL;
}
/* advertise the requested speed and duplex if supported */
- cmd->advertising &= bp->port.supported;
+ cmd->advertising &= bp->port.supported[cfg_idx];
- bp->link_params.req_line_speed = SPEED_AUTO_NEG;
- bp->link_params.req_duplex = DUPLEX_FULL;
- bp->port.advertising |= (ADVERTISED_Autoneg |
+ bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
+ bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL;
+ bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg |
cmd->advertising);
} else { /* forced speed */
/* advertise the requested speed and duplex if supported */
- switch (cmd->speed) {
+ u32 speed = cmd->speed;
+ speed |= (cmd->speed_hi << 16);
+ switch (speed) {
case SPEED_10:
if (cmd->duplex == DUPLEX_FULL) {
- if (!(bp->port.supported &
+ if (!(bp->port.supported[cfg_idx] &
SUPPORTED_10baseT_Full)) {
DP(NETIF_MSG_LINK,
"10M full not supported\n");
@@ -127,7 +184,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
advertising = (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
- if (!(bp->port.supported &
+ if (!(bp->port.supported[cfg_idx] &
SUPPORTED_10baseT_Half)) {
DP(NETIF_MSG_LINK,
"10M half not supported\n");
@@ -141,7 +198,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
case SPEED_100:
if (cmd->duplex == DUPLEX_FULL) {
- if (!(bp->port.supported &
+ if (!(bp->port.supported[cfg_idx] &
SUPPORTED_100baseT_Full)) {
DP(NETIF_MSG_LINK,
"100M full not supported\n");
@@ -151,7 +208,7 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
advertising = (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
- if (!(bp->port.supported &
+ if (!(bp->port.supported[cfg_idx] &
SUPPORTED_100baseT_Half)) {
DP(NETIF_MSG_LINK,
"100M half not supported\n");
@@ -169,7 +226,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- if (!(bp->port.supported & SUPPORTED_1000baseT_Full)) {
+ if (!(bp->port.supported[cfg_idx] &
+ SUPPORTED_1000baseT_Full)) {
DP(NETIF_MSG_LINK, "1G full not supported\n");
return -EINVAL;
}
@@ -185,7 +243,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- if (!(bp->port.supported & SUPPORTED_2500baseX_Full)) {
+ if (!(bp->port.supported[cfg_idx]
+ & SUPPORTED_2500baseX_Full)) {
DP(NETIF_MSG_LINK,
"2.5G full not supported\n");
return -EINVAL;
@@ -201,7 +260,8 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return -EINVAL;
}
- if (!(bp->port.supported & SUPPORTED_10000baseT_Full)) {
+ if (!(bp->port.supported[cfg_idx]
+ & SUPPORTED_10000baseT_Full)) {
DP(NETIF_MSG_LINK, "10G full not supported\n");
return -EINVAL;
}
@@ -211,20 +271,23 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
break;
default:
- DP(NETIF_MSG_LINK, "Unsupported speed\n");
+ DP(NETIF_MSG_LINK, "Unsupported speed %d\n", speed);
return -EINVAL;
}
- bp->link_params.req_line_speed = cmd->speed;
- bp->link_params.req_duplex = cmd->duplex;
- bp->port.advertising = advertising;
+ bp->link_params.req_line_speed[cfg_idx] = speed;
+ bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
+ bp->port.advertising[cfg_idx] = advertising;
}
DP(NETIF_MSG_LINK, "req_line_speed %d\n"
DP_LEVEL " req_duplex %d advertising 0x%x\n",
- bp->link_params.req_line_speed, bp->link_params.req_duplex,
- bp->port.advertising);
+ bp->link_params.req_line_speed[cfg_idx],
+ bp->link_params.req_duplex[cfg_idx],
+ bp->port.advertising[cfg_idx]);
+ /* Set new config */
+ bp->link_params.multi_phy_config = new_multi_phy_config;
if (netif_running(dev)) {
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
bnx2x_link_set(bp);
@@ -937,10 +1000,9 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *epause)
{
struct bnx2x *bp = netdev_priv(dev);
-
- epause->autoneg = (bp->link_params.req_flow_ctrl ==
- BNX2X_FLOW_CTRL_AUTO) &&
- (bp->link_params.req_line_speed == SPEED_AUTO_NEG);
+ int cfg_idx = bnx2x_get_link_cfg_idx(bp);
+ epause->autoneg = (bp->link_params.req_flow_ctrl[cfg_idx] ==
+ BNX2X_FLOW_CTRL_AUTO);
epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) ==
BNX2X_FLOW_CTRL_RX);
@@ -956,7 +1018,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *epause)
{
struct bnx2x *bp = netdev_priv(dev);
-
+ u32 cfg_idx = bnx2x_get_link_cfg_idx(bp);
if (IS_E1HMF(bp))
return 0;
@@ -964,29 +1026,31 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
DP_LEVEL " autoneg %d rx_pause %d tx_pause %d\n",
epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
- bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
+ bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO;
if (epause->rx_pause)
- bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_RX;
+ bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_RX;
if (epause->tx_pause)
- bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_TX;
+ bp->link_params.req_flow_ctrl[cfg_idx] |= BNX2X_FLOW_CTRL_TX;
- if (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
- bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ if (bp->link_params.req_flow_ctrl[cfg_idx] == BNX2X_FLOW_CTRL_AUTO)
+ bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_NONE;
if (epause->autoneg) {
- if (!(bp->port.supported & SUPPORTED_Autoneg)) {
+ if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) {
DP(NETIF_MSG_LINK, "autoneg not supported\n");
return -EINVAL;
}
- if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
- bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
+ if (bp->link_params.req_line_speed[cfg_idx] == SPEED_AUTO_NEG) {
+ bp->link_params.req_flow_ctrl[cfg_idx] =
+ BNX2X_FLOW_CTRL_AUTO;
+ }
}
DP(NETIF_MSG_LINK,
- "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl);
+ "req_flow_ctrl 0x%x\n", bp->link_params.req_flow_ctrl[cfg_idx]);
if (netif_running(dev)) {
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
@@ -1250,12 +1314,12 @@ test_mem_exit:
return rc;
}
-static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up)
+static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up, u8 is_serdes)
{
int cnt = 1000;
if (link_up)
- while (bnx2x_link_test(bp) && cnt--)
+ while (bnx2x_link_test(bp, is_serdes) && cnt--)
msleep(10);
}
@@ -1527,7 +1591,7 @@ static void bnx2x_self_test(struct net_device *dev,
struct ethtool_test *etest, u64 *buf)
{
struct bnx2x *bp = netdev_priv(dev);
-
+ u8 is_serdes;
if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
printk(KERN_ERR "Handling parity error recovery. Try again later\n");
etest->flags |= ETH_TEST_FL_FAILED;
@@ -1542,6 +1606,7 @@ static void bnx2x_self_test(struct net_device *dev,
/* offline tests are not supported in MF mode */
if (IS_E1HMF(bp))
etest->flags &= ~ETH_TEST_FL_OFFLINE;
+ is_serdes = (bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) > 0;
if (etest->flags & ETH_TEST_FL_OFFLINE) {
int port = BP_PORT(bp);
@@ -1553,11 +1618,12 @@ static void bnx2x_self_test(struct net_device *dev,
/* disable input for TX port IF */
REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
- link_up = (bnx2x_link_test(bp) == 0);
+ link_up = bp->link_vars.link_up;
+
bnx2x_nic_unload(bp, UNLOAD_NORMAL);
bnx2x_nic_load(bp, LOAD_DIAG);
/* wait until link state is restored */
- bnx2x_wait_for_link(bp, link_up);
+ bnx2x_wait_for_link(bp, link_up, is_serdes);
if (bnx2x_test_registers(bp) != 0) {
buf[0] = 1;
@@ -1578,7 +1644,7 @@ static void bnx2x_self_test(struct net_device *dev,
bnx2x_nic_load(bp, LOAD_NORMAL);
/* wait until link state is restored */
- bnx2x_wait_for_link(bp, link_up);
+ bnx2x_wait_for_link(bp, link_up, is_serdes);
}
if (bnx2x_test_nvram(bp) != 0) {
buf[3] = 1;
@@ -1589,7 +1655,7 @@ static void bnx2x_self_test(struct net_device *dev,
etest->flags |= ETH_TEST_FL_FAILED;
}
if (bp->port.pmf)
- if (bnx2x_link_test(bp) != 0) {
+ if (bnx2x_link_test(bp, is_serdes) != 0) {
buf[5] = 1;
etest->flags |= ETH_TEST_FL_FAILED;
}
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index f494bc333f52..bab3b2d8cc7a 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -238,7 +238,88 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
u16 xgxs_config_tx[4]; /* 0x1A0 */
- u32 Reserved1[64]; /* 0x1A8 */
+ u32 Reserved1[57]; /* 0x1A8 */
+ u32 speed_capability_mask2; /* 0x28C */
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_MASK 0x0000FFFF
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_SHIFT 0
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10M_FULL 0x00000001
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3__ 0x00000002
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3___ 0x00000004
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_100M_FULL 0x00000008
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_1G 0x00000010
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_2_DOT_5G 0x00000020
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_10G 0x00000040
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_12G 0x00000080
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_12_DOT_5G 0x00000100
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_13G 0x00000200
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_15G 0x00000400
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D3_16G 0x00000800
+
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_MASK 0xFFFF0000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_SHIFT 16
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10M_FULL 0x00010000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0__ 0x00020000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0___ 0x00040000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_100M_FULL 0x00080000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_1G 0x00100000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_2_DOT_5G 0x00200000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_10G 0x00400000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_12G 0x00800000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_12_DOT_5G 0x01000000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_13G 0x02000000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_15G 0x04000000
+#define PORT_HW_CFG_SPEED_CAPABILITY2_D0_16G 0x08000000
+
+ /* In the case where two media types (e.g. copper and fiber) are
+ present and electrically active at the same time, PHY Selection
+ will determine which of the two PHYs will be designated as the
+ Active PHY and used for a connection to the network. */
+ u32 multi_phy_config; /* 0x290 */
+#define PORT_HW_CFG_PHY_SELECTION_MASK 0x00000007
+#define PORT_HW_CFG_PHY_SELECTION_SHIFT 0
+#define PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT 0x00000000
+#define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY 0x00000001
+#define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY 0x00000002
+#define PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY 0x00000003
+#define PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY 0x00000004
+
+ /* When enabled, all second phy nvram parameters will be swapped
+ with the first phy parameters */
+#define PORT_HW_CFG_PHY_SWAPPED_MASK 0x00000008
+#define PORT_HW_CFG_PHY_SWAPPED_SHIFT 3
+#define PORT_HW_CFG_PHY_SWAPPED_DISABLED 0x00000000
+#define PORT_HW_CFG_PHY_SWAPPED_ENABLED 0x00000008
+
+
+ /* Address of the second external phy */
+ u32 external_phy_config2; /* 0x294 */
+#define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_MASK 0x000000FF
+#define PORT_HW_CFG_XGXS_EXT_PHY2_ADDR_SHIFT 0
+
+ /* The second XGXS external PHY type */
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_MASK 0x0000FF00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SHIFT 8
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_DIRECT 0x00000000
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8071 0x00000100
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8072 0x00000200
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8073 0x00000300
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8705 0x00000400
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8706 0x00000500
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8726 0x00000600
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8481 0x00000700
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_SFX7101 0x00000800
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727 0x00000900
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM8727_NOC 0x00000a00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84823 0x00000b00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM54640 0x00000c00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_BCM84833 0x00000d00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_FAILURE 0x0000fd00
+#define PORT_HW_CFG_XGXS_EXT_PHY2_TYPE_NOT_CONN 0x0000ff00
+
+ /* 4 times 16 bits for all 4 lanes. For some external PHYs (such as
+ 8706, 8726 and 8727) not all 4 values are needed. */
+ u16 xgxs_config2_rx[4]; /* 0x296 */
+ u16 xgxs_config2_tx[4]; /* 0x2A0 */
u32 lane_config;
#define PORT_HW_CFG_LANE_SWAP_CFG_MASK 0x0000ffff
@@ -532,10 +613,17 @@ struct port_feat_cfg { /* port 0: 0x454 port 1: 0x4c8 */
#define PORT_FEATURE_FLOW_CONTROL_NONE 0x00000400
/* The default for MCP link configuration,
- uses the same defines as link_config */
+ uses the same defines as link_config */
u32 mfw_wol_link_cfg;
+ /* The default for the driver of the second external phy,
+ uses the same defines as link_config */
+ u32 link_config2; /* 0x47C */
- u32 reserved[19];
+ /* The default for MCP of the second external phy,
+ uses the same defines as link_config */
+ u32 mfw_wol_link_cfg2; /* 0x480 */
+
+ u32 Reserved2[17]; /* 0x484 */
};
@@ -703,8 +791,14 @@ struct drv_func_mb {
* The optic module verification commands require bootcode
* v5.0.6 or later
*/
-#define DRV_MSG_CODE_VRFY_OPT_MDL 0xa0000000
-#define REQ_BC_VER_4_VRFY_OPT_MDL 0x00050006
+#define DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL 0xa0000000
+#define REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL 0x00050006
+ /*
+ * The specific optic module verification command requires bootcode
+ * v5.2.12 or later
+ */
+#define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL 0xa1000000
+#define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL 0x00050234
#define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000
#define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000
@@ -939,7 +1033,12 @@ struct shmem2_region {
#define SHMEM_DCC_SUPPORT_SET_PROTOCOL_TLV 0x00000040
#define SHMEM_DCC_SUPPORT_SET_PRIORITY_TLV 0x00000080
#define SHMEM_DCC_SUPPORT_DEFAULT SHMEM_DCC_SUPPORT_NONE
-
+ u32 ext_phy_fw_version2[PORT_MAX];
+ /*
+ * For backwards compatibility, if the mf_cfg_addr does not exist
+ * (the size filed is smaller than 0xc) the mf_cfg resides at the
+ * end of struct shmem_region
+ */
};
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index e2509aab9f0d..571785898970 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -899,6 +899,7 @@ static void bnx2x_xgxs_deassert(struct link_params *params)
params->phy[INT_PHY].def_md_devad);
}
+
void bnx2x_link_status_update(struct link_params *params,
struct link_vars *vars)
{
@@ -906,10 +907,6 @@ void bnx2x_link_status_update(struct link_params *params,
u8 link_10g;
u8 port = params->port;
- if (params->switch_cfg == SWITCH_CFG_1G)
- vars->phy_flags = PHY_SERDES_FLAG;
- else
- vars->phy_flags = PHY_XGXS_FLAG;
vars->link_status = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region,
port_mb[port].link_status));
@@ -1880,12 +1877,8 @@ static u8 bnx2x_link_settings_status(struct bnx2x_phy *phy,
DP(NETIF_MSG_LINK, "gp_status 0x%x phy_link_up %x line_speed %x\n",
gp_status, vars->phy_link_up, vars->line_speed);
- DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x"
- " autoneg 0x%x\n",
- vars->duplex,
- vars->flow_ctrl, vars->autoneg);
- DP(NETIF_MSG_LINK, "link_status 0x%x\n", vars->link_status);
-
+ DP(NETIF_MSG_LINK, "duplex %x flow_ctrl 0x%x link_status 0x%x\n",
+ vars->duplex, vars->flow_ctrl, vars->link_status);
return rc;
}
@@ -2164,45 +2157,43 @@ static void bnx2x_link_int_enable(struct link_params *params)
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
}
-static void bnx2x_8481_rearm_latch_signal(struct bnx2x *bp, u8 port,
- u8 is_mi_int)
+static void bnx2x_rearm_latch_signal(struct bnx2x *bp, u8 port,
+ u8 exp_mi_int)
{
- u32 latch_status = 0, is_mi_int_status;
- /* Disable the MI INT ( external phy int )
- * by writing 1 to the status register. Link down indication
- * is high-active-signal, so in this case we need to write the
- * status to clear the XOR
+ u32 latch_status = 0;
+
+ /**
+ * Disable the MI INT ( external phy int ) by writing 1 to the
+ * status register. Link down indication is high-active-signal,
+ * so in this case we need to write the status to clear the XOR
*/
/* Read Latched signals */
latch_status = REG_RD(bp,
- NIG_REG_LATCH_STATUS_0 + port*8);
- is_mi_int_status = REG_RD(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0 + port*4);
- DP(NETIF_MSG_LINK, "original_signal = 0x%x, nig_status = 0x%x,"
- "latch_status = 0x%x\n",
- is_mi_int, is_mi_int_status, latch_status);
+ NIG_REG_LATCH_STATUS_0 + port*8);
+ DP(NETIF_MSG_LINK, "latch_status = 0x%x\n", latch_status);
/* Handle only those with latched-signal=up.*/
+ if (exp_mi_int)
+ bnx2x_bits_en(bp,
+ NIG_REG_STATUS_INTERRUPT_PORT0
+ + port*4,
+ NIG_STATUS_EMAC0_MI_INT);
+ else
+ bnx2x_bits_dis(bp,
+ NIG_REG_STATUS_INTERRUPT_PORT0
+ + port*4,
+ NIG_STATUS_EMAC0_MI_INT);
+
if (latch_status & 1) {
- /* For all latched-signal=up,Write original_signal to status */
- if (is_mi_int)
- bnx2x_bits_en(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0
- + port*4,
- NIG_STATUS_EMAC0_MI_INT);
- else
- bnx2x_bits_dis(bp,
- NIG_REG_STATUS_INTERRUPT_PORT0
- + port*4,
- NIG_STATUS_EMAC0_MI_INT);
+
/* For all latched-signal=up : Re-Arm Latch signals */
REG_WR(bp, NIG_REG_LATCH_STATUS_0 + port*8,
(latch_status & 0xfffe) | (latch_status & 1));
}
+ /* For all latched-signal=up,Write original_signal to status */
}
static void bnx2x_link_int_ack(struct link_params *params,
- struct link_vars *vars, u8 is_10g,
- u8 is_mi_int)
+ struct link_vars *vars, u8 is_10g)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
@@ -2213,12 +2204,6 @@ static void bnx2x_link_int_ack(struct link_params *params,
(NIG_STATUS_XGXS0_LINK10G |
NIG_STATUS_XGXS0_LINK_STATUS |
NIG_STATUS_SERDES0_LINK_STATUS));
- if ((params->phy[EXT_PHY1].type
- == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) ||
- (params->phy[EXT_PHY1].type
- == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) {
- bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int);
- }
if (vars->phy_link_up) {
if (is_10g) {
/* Disable the 10G link interrupt
@@ -2264,30 +2249,39 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 *len)
u32 mask = 0xf0000000;
u8 shift = 8*4;
u8 digit;
+ u8 remove_leading_zeros = 1;
if (*len < 10) {
/* Need more than 10chars for this format */
*str_ptr = '\0';
+ (*len)--;
return -EINVAL;
}
while (shift > 0) {
shift -= 4;
digit = ((num & mask) >> shift);
- if (digit < 0xa)
+ if (digit == 0 && remove_leading_zeros) {
+ mask = mask >> 4;
+ continue;
+ } else if (digit < 0xa)
*str_ptr = digit + '0';
else
*str_ptr = digit - 0xa + 'a';
+ remove_leading_zeros = 0;
str_ptr++;
+ (*len)--;
mask = mask >> 4;
if (shift == 4*4) {
- *str_ptr = ':';
+ *str_ptr = '.';
str_ptr++;
+ (*len)--;
+ remove_leading_zeros = 1;
}
}
- *str_ptr = '\0';
return 0;
}
+
static u8 bnx2x_null_format_ver(u32 spirom_ver, u8 *str, u16 *len)
{
str[0] = '\0';
@@ -2302,6 +2296,7 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
u32 spirom_ver = 0;
u8 status = 0;
u8 *ver_p = version;
+ u16 remain_len = len;
if (version == NULL || params == NULL)
return -EINVAL;
bp = params->bp;
@@ -2310,10 +2305,28 @@ u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
version[0] = '\0';
spirom_ver = REG_RD(bp, params->phy[EXT_PHY1].ver_addr);
- if (params->phy[EXT_PHY1].format_fw_ver)
+ if (params->phy[EXT_PHY1].format_fw_ver) {
status |= params->phy[EXT_PHY1].format_fw_ver(spirom_ver,
ver_p,
- &len);
+ &remain_len);
+ ver_p += (len - remain_len);
+ }
+ if ((params->num_phys == MAX_PHYS) &&
+ (params->phy[EXT_PHY2].ver_addr != 0)) {
+ spirom_ver = REG_RD(bp,
+ params->phy[EXT_PHY2].ver_addr);
+ if (params->phy[EXT_PHY2].format_fw_ver) {
+ *ver_p = '/';
+ ver_p++;
+ remain_len--;
+ status |= params->phy[EXT_PHY2].format_fw_ver(
+ spirom_ver,
+ ver_p,
+ &remain_len);
+ ver_p = version + (len - remain_len);
+ }
+ }
+ *ver_p = '\0';
return status;
}
@@ -2550,30 +2563,56 @@ u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed)
}
-u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars)
+/**
+ * This function comes to reflect the actual link state read DIRECTLY from the
+ * HW
+ */
+u8 bnx2x_test_link(struct link_params *params, struct link_vars *vars,
+ u8 is_serdes)
{
struct bnx2x *bp = params->bp;
u16 gp_status = 0, phy_index = 0;
+ u8 ext_phy_link_up = 0, serdes_phy_type;
+ struct link_vars temp_vars;
CL45_RD_OVER_CL22(bp, &params->phy[INT_PHY],
MDIO_REG_BANK_GP_STATUS,
MDIO_GP_STATUS_TOP_AN_STATUS1,
&gp_status);
/* link is up only if both local phy and external phy are up */
- if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) {
- u8 ext_phy_link_up = 1;
- struct link_vars temp_vars;
+ if (!(gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS))
+ return -ESRCH;
+
+ switch (params->num_phys) {
+ case 1:
+ /* No external PHY */
+ return 0;
+ case 2:
+ ext_phy_link_up = params->phy[EXT_PHY1].read_status(
+ &params->phy[EXT_PHY1],
+ params, &temp_vars);
+ break;
+ case 3: /* Dual Media */
for (phy_index = EXT_PHY1; phy_index < params->num_phys;
phy_index++) {
- if (params->phy[phy_index].read_status)
- ext_phy_link_up &=
+ serdes_phy_type = ((params->phy[phy_index].media_type ==
+ ETH_PHY_SFP_FIBER) ||
+ (params->phy[phy_index].media_type ==
+ ETH_PHY_XFP_FIBER));
+
+ if (is_serdes != serdes_phy_type)
+ continue;
+ if (params->phy[phy_index].read_status) {
+ ext_phy_link_up |=
params->phy[phy_index].read_status(
&params->phy[phy_index],
params, &temp_vars);
+ }
}
- if (ext_phy_link_up)
- return 0;
+ break;
}
+ if (ext_phy_link_up)
+ return 0;
return -ESRCH;
}
@@ -2619,6 +2658,19 @@ static u8 bnx2x_link_initialize(struct link_params *params,
if (!non_ext_phy)
for (phy_index = EXT_PHY1; phy_index < params->num_phys;
phy_index++) {
+ /**
+ * No need to initialize second phy in case of first
+ * phy only selection. In case of second phy, we do
+ * need to initialize the first phy, since they are
+ * connected.
+ **/
+ if (phy_index == EXT_PHY2 &&
+ (bnx2x_phy_selection(params) ==
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) {
+ DP(NETIF_MSG_LINK, "Not initializing"
+ "second phy\n");
+ continue;
+ }
params->phy[phy_index].config_init(
&params->phy[phy_index],
params, vars);
@@ -2816,6 +2868,40 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
if (!ext_phy_link_up) {
ext_phy_link_up = 1;
active_external_phy = phy_index;
+ } else {
+ switch (bnx2x_phy_selection(params)) {
+ case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ /**
+ * In this option, the first PHY makes sure to pass the
+ * traffic through itself only.
+ * Its not clear how to reset the link on the second phy
+ **/
+ active_external_phy = EXT_PHY1;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ /**
+ * In this option, the first PHY makes sure to pass the
+ * traffic through the second PHY.
+ **/
+ active_external_phy = EXT_PHY2;
+ break;
+ default:
+ /**
+ * Link indication on both PHYs with the following cases
+ * is invalid:
+ * - FIRST_PHY means that second phy wasn't initialized,
+ * hence its link is expected to be down
+ * - SECOND_PHY means that first phy should not be able
+ * to link up by itself (using configuration)
+ * - DEFAULT should be overriden during initialiazation
+ **/
+ DP(NETIF_MSG_LINK, "Invalid link indication"
+ "mpc=0x%x. DISABLING LINK !!!\n",
+ params->multi_phy_config);
+ ext_phy_link_up = 0;
+ break;
+ }
}
}
prev_line_speed = vars->line_speed;
@@ -2845,6 +2931,21 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
* the external phy.
*/
vars->link_status |= phy_vars[active_external_phy].link_status;
+
+ /**
+ * if active_external_phy is first PHY and link is up - disable
+ * disable TX on second external PHY
+ */
+ if (active_external_phy == EXT_PHY1) {
+ if (params->phy[EXT_PHY2].phy_specific_func) {
+ DP(NETIF_MSG_LINK, "Disabling TX on"
+ " EXT_PHY2\n");
+ params->phy[EXT_PHY2].phy_specific_func(
+ &params->phy[EXT_PHY2],
+ params, DISABLE_TX);
+ }
+ }
+
ext_phy_line_speed = phy_vars[active_external_phy].line_speed;
vars->duplex = phy_vars[active_external_phy].duplex;
if (params->phy[active_external_phy].supported &
@@ -2853,6 +2954,17 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
DP(NETIF_MSG_LINK, "Active external phy selected: %x\n",
active_external_phy);
}
+
+ for (phy_index = EXT_PHY1; phy_index < params->num_phys;
+ phy_index++) {
+ if (params->phy[phy_index].flags &
+ FLAGS_REARM_LATCH_SIGNAL) {
+ bnx2x_rearm_latch_signal(bp, port,
+ phy_index ==
+ active_external_phy);
+ break;
+ }
+ }
DP(NETIF_MSG_LINK, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x,"
" ext_phy_line_speed = %d\n", vars->flow_ctrl,
vars->link_status, ext_phy_line_speed);
@@ -2885,7 +2997,7 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
(vars->line_speed == SPEED_15000) ||
(vars->line_speed == SPEED_16000));
- bnx2x_link_int_ack(params, vars, link_10g, is_mi_int);
+ bnx2x_link_int_ack(params, vars, link_10g);
/**
* In case external phy link is up, and internal link is down
@@ -3898,11 +4010,11 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u32 val;
- u32 fw_resp;
+ u32 val, cmd;
+ u32 fw_resp, fw_cmd_param;
char vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE+1];
char vendor_pn[SFP_EEPROM_PART_NO_SIZE+1];
-
+ phy->flags &= ~FLAGS_SFP_NOT_APPROVED;
val = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
port_feature_config[params->port].config));
@@ -3912,15 +4024,27 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
return 0;
}
- /* Ask the FW to validate the module */
- if (!(params->feature_config_flags &
- FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY)) {
+ if (params->feature_config_flags &
+ FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY) {
+ /* Use specific phy request */
+ cmd = DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL;
+ } else if (params->feature_config_flags &
+ FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) {
+ /* Use first phy request only in case of non-dual media*/
+ if (DUAL_MEDIA(params)) {
+ DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
+ "verification\n");
+ return -EINVAL;
+ }
+ cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL;
+ } else {
+ /* No support in OPT MDL detection */
DP(NETIF_MSG_LINK, "FW does not support OPT MDL "
- "verification\n");
+ "verification\n");
return -EINVAL;
}
-
- fw_resp = bnx2x_fw_command(bp, DRV_MSG_CODE_VRFY_OPT_MDL);
+ fw_cmd_param = FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl);
+ fw_resp = bnx2x_fw_command(bp, cmd, fw_cmd_param);
if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) {
DP(NETIF_MSG_LINK, "Approved module\n");
return 0;
@@ -3947,6 +4071,7 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy,
netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected,"
" Port %d from %s part number %s\n",
params->port, vendor_name, vendor_pn);
+ phy->flags |= FLAGS_SFP_NOT_APPROVED;
return -EINVAL;
}
@@ -4092,6 +4217,27 @@ static u8 bnx2x_8727_set_limiting_mode(struct bnx2x *bp,
return 0;
}
+static void bnx2x_8727_specific_func(struct bnx2x_phy *phy,
+ struct link_params *params,
+ u32 action)
+{
+ struct bnx2x *bp = params->bp;
+
+ switch (action) {
+ case DISABLE_TX:
+ bnx2x_sfp_set_transmitter(bp, phy, params->port, 0);
+ break;
+ case ENABLE_TX:
+ if (!(phy->flags & FLAGS_SFP_NOT_APPROVED))
+ bnx2x_sfp_set_transmitter(bp, phy, params->port, 1);
+ break;
+ default:
+ DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n",
+ action);
+ return;
+ }
+}
+
static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy,
struct link_params *params)
{
@@ -4625,6 +4771,19 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy,
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1);
DP(NETIF_MSG_LINK, "1.7 = 0x%x\n", tmp1);
+ /**
+ * Power down the XAUI until link is up in case of dual-media
+ * and 1G
+ */
+ if (DUAL_MEDIA(params)) {
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_GP, &val);
+ val |= (3<<10);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_GP, val);
+ }
} else if ((phy->req_line_speed == SPEED_AUTO_NEG) &&
((phy->speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) &&
@@ -4766,7 +4925,15 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
u8 link_up = 0;
u16 link_status = 0;
- u16 rx_alarm_status, val1;
+ u16 rx_alarm_status, lasi_ctrl, val1;
+
+ /* If PHY is not initialized, do not check link status */
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL,
+ &lasi_ctrl);
+ if (!lasi_ctrl)
+ return 0;
+
/* Check the LASI */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM,
@@ -4837,7 +5004,8 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_ALARM_CTRL,
((1<<5) | (1<<2)));
}
-
+ DP(NETIF_MSG_LINK, "Enabling 8727 TX laser if SFP is approved\n");
+ bnx2x_8727_specific_func(phy, params, ENABLE_TX);
/* If transmitter is disabled, ignore false link up indication */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1);
@@ -4867,6 +5035,24 @@ static u8 bnx2x_8727_read_status(struct bnx2x_phy *phy,
}
if (link_up)
bnx2x_ext_phy_resolve_fc(phy, params, vars);
+
+ if ((DUAL_MEDIA(params)) &&
+ (phy->req_line_speed == SPEED_1000)) {
+ bnx2x_cl45_read(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_GP, &val1);
+ /**
+ * In case of dual-media board and 1G, power up the XAUI side,
+ * otherwise power it down. For 10G it is done automatically
+ */
+ if (link_up)
+ val1 &= ~(3<<10);
+ else
+ val1 |= (3<<10);
+ bnx2x_cl45_write(bp, phy,
+ MDIO_PMA_DEVAD,
+ MDIO_PMA_REG_8727_PCS_GP, val1);
+ }
return link_up;
}
@@ -4876,6 +5062,9 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
struct bnx2x *bp = params->bp;
/* Disable Transmitter */
bnx2x_sfp_set_transmitter(bp, phy, params->port, 0);
+ /* Clear LASI */
+ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0);
+
}
/******************************************************************/
@@ -4973,16 +5162,11 @@ static void bnx2x_848xx_set_led(struct bnx2x *bp,
}
static u8 bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
- struct link_params *params,
- struct link_vars *vars)
+ struct link_params *params,
+ struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u16 autoneg_val, an_1000_val, an_10_100_val;
- /**
- * This phy uses the NIG latch mechanism since link indication
- * arrives through its LED4 and not via its LASI signal, so we
- * get steady signal instead of clear on read
- */
bnx2x_wait_reset_complete(bp, phy);
bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
1 << NIG_LATCH_BC_ENABLE_MI_INT);
@@ -5122,7 +5306,11 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
+ u8 initialize = 1;
+ u16 val;
u16 temp;
+ u32 actual_phy_selection;
+ u8 rc = 0;
msleep(1);
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
@@ -5135,10 +5323,55 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
*/
temp = vars->line_speed;
vars->line_speed = SPEED_10000;
- bnx2x_set_autoneg(phy, params, vars, 0);
- bnx2x_program_serdes(phy, params, vars);
+ bnx2x_set_autoneg(&params->phy[INT_PHY], params, vars, 0);
+ bnx2x_program_serdes(&params->phy[INT_PHY], params, vars);
vars->line_speed = temp;
- return bnx2x_848xx_cmn_config_init(phy, params, vars);
+
+ /* Set dual-media configuration according to configuration */
+
+ bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_CTL_REG_84823_MEDIA, &val);
+ val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
+ MDIO_CTL_REG_84823_MEDIA_LINE_MASK |
+ MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN |
+ MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK |
+ MDIO_CTL_REG_84823_MEDIA_FIBER_1G);
+ val |= MDIO_CTL_REG_84823_CTRL_MAC_XFI |
+ MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L;
+
+ actual_phy_selection = bnx2x_phy_selection(params);
+
+ switch (actual_phy_selection) {
+ case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+ /* Do nothing. Essentialy this is like the priority copper */
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+ /* Do nothing here. The first PHY won't be initialized at all */
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+ val |= MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN;
+ initialize = 0;
+ break;
+ }
+ if (params->phy[EXT_PHY2].req_line_speed == SPEED_1000)
+ val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G;
+
+ bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+ MDIO_CTL_REG_84823_MEDIA, val);
+ DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
+ params->multi_phy_config, val);
+
+ if (initialize)
+ rc = bnx2x_848xx_cmn_config_init(phy, params, vars);
+ else
+ bnx2x_save_848xx_spirom_version(phy, params);
+ return rc;
}
static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
@@ -5426,7 +5659,8 @@ static struct bnx2x_phy phy_null = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_serdes = {
@@ -5461,7 +5695,8 @@ static struct bnx2x_phy phy_serdes = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_xgxs = {
@@ -5497,7 +5732,8 @@ static struct bnx2x_phy phy_xgxs = {
.config_loopback = (config_loopback_t)bnx2x_set_xgxs_loopback,
.format_fw_ver = (format_fw_ver_t)NULL,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_7101 = {
@@ -5527,7 +5763,8 @@ static struct bnx2x_phy phy_7101 = {
.config_loopback = (config_loopback_t)bnx2x_7101_config_loopback,
.format_fw_ver = (format_fw_ver_t)bnx2x_7101_format_ver,
.hw_reset = (hw_reset_t)bnx2x_7101_hw_reset,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_8073 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073,
@@ -5558,7 +5795,8 @@ static struct bnx2x_phy phy_8073 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_format_ver,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_8705 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705,
@@ -5586,7 +5824,8 @@ static struct bnx2x_phy phy_8705 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_null_format_ver,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_8706 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
@@ -5615,7 +5854,8 @@ static struct bnx2x_phy phy_8706 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_format_ver,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_8726 = {
@@ -5647,7 +5887,8 @@ static struct bnx2x_phy phy_8726 = {
.config_loopback = (config_loopback_t)bnx2x_8726_config_loopback,
.format_fw_ver = (format_fw_ver_t)bnx2x_format_ver,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_8727 = {
@@ -5677,12 +5918,14 @@ static struct bnx2x_phy phy_8727 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_format_ver,
.hw_reset = (hw_reset_t)bnx2x_8727_hw_reset,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)bnx2x_8727_specific_func
};
static struct bnx2x_phy phy_8481 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
.addr = 0xff,
- .flags = FLAGS_FAN_FAILURE_DET_REQ,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ |
+ FLAGS_REARM_LATCH_SIGNAL,
.def_md_devad = 0,
.reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
@@ -5711,13 +5954,15 @@ static struct bnx2x_phy phy_8481 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver,
.hw_reset = (hw_reset_t)bnx2x_8481_hw_reset,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
static struct bnx2x_phy phy_84823 = {
.type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823,
.addr = 0xff,
- .flags = FLAGS_FAN_FAILURE_DET_REQ,
+ .flags = FLAGS_FAN_FAILURE_DET_REQ |
+ FLAGS_REARM_LATCH_SIGNAL,
.def_md_devad = 0,
.reserved = 0,
.rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
@@ -5746,7 +5991,8 @@ static struct bnx2x_phy phy_84823 = {
.config_loopback = (config_loopback_t)NULL,
.format_fw_ver = (format_fw_ver_t)bnx2x_848xx_format_ver,
.hw_reset = (hw_reset_t)NULL,
- .set_link_led = (set_link_led_t)NULL
+ .set_link_led = (set_link_led_t)NULL,
+ .phy_specific_func = (phy_specific_func_t)NULL
};
/*****************************************************************/
@@ -5767,14 +6013,23 @@ static void bnx2x_populate_preemphasis(struct bnx2x *bp, u32 shmem_base,
* shmem. When num_phys is greater than 1, than this value
* applies only to EXT_PHY1
*/
+ if (phy_index == INT_PHY || phy_index == EXT_PHY1) {
+ rx = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].xgxs_config_rx[i<<1]));
+
+ tx = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].xgxs_config_tx[i<<1]));
+ } else {
+ rx = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].xgxs_config2_rx[i<<1]));
- rx = REG_RD(bp, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].xgxs_config_rx[i<<1]));
-
- tx = REG_RD(bp, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[port].xgxs_config_tx[i<<1]));
+ tx = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].xgxs_config2_rx[i<<1]));
+ }
phy->rx_preemphasis[i << 1] = ((rx>>16) & 0xffff);
phy->rx_preemphasis[(i << 1) + 1] = (rx & 0xffff);
@@ -5794,6 +6049,11 @@ static u32 bnx2x_get_ext_phy_config(struct bnx2x *bp, u32 shmem_base,
offsetof(struct shmem_region,
dev_info.port_hw_config[port].external_phy_config));
break;
+ case EXT_PHY2:
+ ext_phy_config = REG_RD(bp, shmem_base +
+ offsetof(struct shmem_region,
+ dev_info.port_hw_config[port].external_phy_config2));
+ break;
default:
DP(NETIF_MSG_LINK, "Invalid phy_index %d\n", phy_index);
return -EINVAL;
@@ -5844,6 +6104,7 @@ static u8 bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port,
static u8 bnx2x_populate_ext_phy(struct bnx2x *bp,
u8 phy_index,
u32 shmem_base,
+ u32 shmem2_base,
u8 port,
struct bnx2x_phy *phy)
{
@@ -5905,15 +6166,30 @@ static u8 bnx2x_populate_ext_phy(struct bnx2x *bp,
*/
config2 = REG_RD(bp, shmem_base + offsetof(struct shmem_region,
dev_info.shared_hw_config.config2));
-
- phy->ver_addr = shmem_base + offsetof(struct shmem_region,
- port_mb[port].ext_phy_fw_version);
+ if (phy_index == EXT_PHY1) {
+ phy->ver_addr = shmem_base + offsetof(struct shmem_region,
+ port_mb[port].ext_phy_fw_version);
/* Check specific mdc mdio settings */
if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK)
mdc_mdio_access = config2 &
SHARED_HW_CFG_MDC_MDIO_ACCESS1_MASK;
+ } else {
+ u32 size = REG_RD(bp, shmem2_base);
+ if (size >
+ offsetof(struct shmem2_region, ext_phy_fw_version2)) {
+ phy->ver_addr = shmem2_base +
+ offsetof(struct shmem2_region,
+ ext_phy_fw_version2[port]);
+ }
+ /* Check specific mdc mdio settings */
+ if (config2 & SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK)
+ mdc_mdio_access = (config2 &
+ SHARED_HW_CFG_MDC_MDIO_ACCESS2_MASK) >>
+ (SHARED_HW_CFG_MDC_MDIO_ACCESS2_SHIFT -
+ SHARED_HW_CFG_MDC_MDIO_ACCESS1_SHIFT);
+ }
phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port);
/**
@@ -5931,30 +6207,41 @@ static u8 bnx2x_populate_ext_phy(struct bnx2x *bp,
}
static u8 bnx2x_populate_phy(struct bnx2x *bp, u8 phy_index, u32 shmem_base,
- u8 port, struct bnx2x_phy *phy)
+ u32 shmem2_base, u8 port, struct bnx2x_phy *phy)
{
u8 status = 0;
phy->type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN;
if (phy_index == INT_PHY)
return bnx2x_populate_int_phy(bp, shmem_base, port, phy);
- status = bnx2x_populate_ext_phy(bp, phy_index, shmem_base,
+ status = bnx2x_populate_ext_phy(bp, phy_index, shmem_base, shmem2_base,
port, phy);
return status;
}
static void bnx2x_phy_def_cfg(struct link_params *params,
struct bnx2x_phy *phy,
- u8 actual_phy_idx)
+ u8 phy_index)
{
struct bnx2x *bp = params->bp;
u32 link_config;
/* Populate the default phy configuration for MF mode */
- link_config = REG_RD(bp, params->shmem_base +
- offsetof(struct shmem_region, dev_info.
- port_feature_config[params->port].link_config));
- phy->speed_cap_mask = REG_RD(bp, params->shmem_base +
+ if (phy_index == EXT_PHY2) {
+ link_config = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].link_config2));
+ phy->speed_cap_mask = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_hw_config[params->port].speed_capability_mask2));
+ } else {
+ link_config = REG_RD(bp, params->shmem_base +
+ offsetof(struct shmem_region, dev_info.
+ port_feature_config[params->port].link_config));
+ phy->speed_cap_mask = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
- port_hw_config[params->port].speed_capability_mask));
+ port_hw_config[params->port].speed_capability_mask));
+ }
+ DP(NETIF_MSG_LINK, "Default config phy idx %x cfg 0x%x speed_cap_mask"
+ " 0x%x\n", phy_index, link_config, phy->speed_cap_mask);
phy->req_duplex = DUPLEX_FULL;
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
@@ -6001,23 +6288,66 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
}
}
+u32 bnx2x_phy_selection(struct link_params *params)
+{
+ u32 phy_config_swapped, prio_cfg;
+ u32 return_cfg = PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT;
+
+ phy_config_swapped = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
+
+ prio_cfg = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SELECTION_MASK;
+
+ if (phy_config_swapped) {
+ switch (prio_cfg) {
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+ return_cfg = PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ break;
+ }
+ } else
+ return_cfg = prio_cfg;
+
+ return return_cfg;
+}
+
+
u8 bnx2x_phy_probe(struct link_params *params)
{
u8 phy_index, actual_phy_idx, link_cfg_idx;
-
+ u32 phy_config_swapped;
struct bnx2x *bp = params->bp;
struct bnx2x_phy *phy;
params->num_phys = 0;
DP(NETIF_MSG_LINK, "Begin phy probe\n");
+ phy_config_swapped = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
for (phy_index = INT_PHY; phy_index < MAX_PHYS;
phy_index++) {
link_cfg_idx = LINK_CONFIG_IDX(phy_index);
actual_phy_idx = phy_index;
-
+ if (phy_config_swapped) {
+ if (phy_index == EXT_PHY1)
+ actual_phy_idx = EXT_PHY2;
+ else if (phy_index == EXT_PHY2)
+ actual_phy_idx = EXT_PHY1;
+ }
+ DP(NETIF_MSG_LINK, "phy_config_swapped %x, phy_index %x,"
+ " actual_phy_idx %x\n", phy_config_swapped,
+ phy_index, actual_phy_idx);
phy = &params->phy[actual_phy_idx];
if (bnx2x_populate_phy(bp, phy_index, params->shmem_base,
- params->port,
+ params->shmem2_base, params->port,
phy) != 0) {
params->num_phys = 0;
DP(NETIF_MSG_LINK, "phy probe failed in phy index %d\n",
@@ -6031,7 +6361,7 @@ u8 bnx2x_phy_probe(struct link_params *params)
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN)
break;
- bnx2x_phy_def_cfg(params, phy, actual_phy_idx);
+ bnx2x_phy_def_cfg(params, phy, phy_index);
params->num_phys++;
}
@@ -6049,23 +6379,30 @@ u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx)
static void set_phy_vars(struct link_params *params)
{
struct bnx2x *bp = params->bp;
- u8 actual_phy_idx, phy_index;
-
+ u8 actual_phy_idx, phy_index, link_cfg_idx;
+ u8 phy_config_swapped = params->multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED;
for (phy_index = INT_PHY; phy_index < params->num_phys;
phy_index++) {
-
+ link_cfg_idx = LINK_CONFIG_IDX(phy_index);
actual_phy_idx = phy_index;
+ if (phy_config_swapped) {
+ if (phy_index == EXT_PHY1)
+ actual_phy_idx = EXT_PHY2;
+ else if (phy_index == EXT_PHY2)
+ actual_phy_idx = EXT_PHY1;
+ }
params->phy[actual_phy_idx].req_flow_ctrl =
- params->req_flow_ctrl;
+ params->req_flow_ctrl[link_cfg_idx];
params->phy[actual_phy_idx].req_line_speed =
- params->req_line_speed;
+ params->req_line_speed[link_cfg_idx];
params->phy[actual_phy_idx].speed_cap_mask =
- params->speed_cap_mask;
+ params->speed_cap_mask[link_cfg_idx];
params->phy[actual_phy_idx].req_duplex =
- params->req_duplex;
+ params->req_duplex[link_cfg_idx];
DP(NETIF_MSG_LINK, "req_flow_ctrl %x, req_line_speed %x,"
" speed_cap_mask %x\n",
@@ -6078,11 +6415,11 @@ static void set_phy_vars(struct link_params *params)
u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
- u32 val;
-
DP(NETIF_MSG_LINK, "Phy Initialization started\n");
- DP(NETIF_MSG_LINK, "req_speed %d, req_flowctrl %d\n",
- params->req_line_speed, params->req_flow_ctrl);
+ DP(NETIF_MSG_LINK, "(1) req_speed %d, req_flowctrl %d\n",
+ params->req_line_speed[0], params->req_flow_ctrl[0]);
+ DP(NETIF_MSG_LINK, "(2) req_speed %d, req_flowctrl %d\n",
+ params->req_line_speed[1], params->req_flow_ctrl[1]);
vars->link_status = 0;
vars->phy_link_up = 0;
vars->link_up = 0;
@@ -6196,21 +6533,23 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
(params->loopback_mode == LOOPBACK_EXT_PHY)) {
vars->link_up = 1;
- vars->line_speed = SPEED_10000;
- vars->duplex = DUPLEX_FULL;
vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
-
- vars->phy_flags = PHY_XGXS_FLAG;
-
- val = REG_RD(bp,
- NIG_REG_XGXS0_CTRL_PHY_ADDR+
- params->port*0x18);
+ vars->duplex = DUPLEX_FULL;
+ if (params->req_line_speed[0] == SPEED_1000) {
+ vars->line_speed = SPEED_1000;
+ vars->mac_type = MAC_TYPE_EMAC;
+ } else {
+ vars->line_speed = SPEED_10000;
+ vars->mac_type = MAC_TYPE_BMAC;
+ }
bnx2x_xgxs_deassert(params);
bnx2x_link_initialize(params, vars);
- vars->mac_type = MAC_TYPE_BMAC;
-
+ if (params->req_line_speed[0] == SPEED_1000) {
+ bnx2x_emac_program(params, vars);
+ bnx2x_emac_enable(params, vars, 0);
+ } else
bnx2x_bmac_enable(params, vars, 0);
if (params->loopback_mode == LOOPBACK_XGXS) {
@@ -6311,7 +6650,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
/****************************************************************************/
/* Common function */
/****************************************************************************/
-static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base, u8 phy_index)
{
struct bnx2x_phy phy[PORT_MAX];
struct bnx2x_phy *phy_blk[PORT_MAX];
@@ -6321,7 +6660,7 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
/* PART1 - Reset both phys */
for (port = PORT_MAX - 1; port >= PORT_0; port--) {
/* Extract the ext phy address for the port */
- if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base,
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
port, &phy[port]) !=
0) {
DP(NETIF_MSG_LINK, "populate_phy failed\n");
@@ -6419,7 +6758,8 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
return 0;
}
-static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base, u8 phy_index)
{
u32 val;
s8 port;
@@ -6435,7 +6775,7 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
msleep(5);
for (port = 0; port < PORT_MAX; port++) {
/* Extract the ext phy address for the port */
- if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base,
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
port, &phy) !=
0) {
DP(NETIF_MSG_LINK, "populate phy failed\n");
@@ -6455,10 +6795,10 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, u32 shmem_base)
return 0;
}
-
-static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base, u8 phy_index)
{
- s8 port, first_port, i;
+ s8 port;
u32 swap_val, swap_override;
struct bnx2x_phy phy[PORT_MAX];
struct bnx2x_phy *phy_blk[PORT_MAX];
@@ -6466,18 +6806,19 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
- bnx2x_ext_phy_hw_reset(bp, 1 ^ (swap_val && swap_override));
- msleep(5);
+ port = 1;
- if (swap_val && swap_override)
- first_port = PORT_0;
- else
- first_port = PORT_1;
+ bnx2x_ext_phy_hw_reset(bp, port ^ (swap_val && swap_override));
+
+ /* Calculate the port based on port swap */
+ port ^= (swap_val && swap_override);
+
+ msleep(5);
/* PART1 - Reset both phys */
- for (i = 0, port = first_port; i < PORT_MAX; i++, port = !port) {
+ for (port = PORT_MAX - 1; port >= PORT_0; port--) {
/* Extract the ext phy address for the port */
- if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base,
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
port, &phy[port]) !=
0) {
DP(NETIF_MSG_LINK, "populate phy failed\n");
@@ -6528,35 +6869,32 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base)
return 0;
}
-u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base, u8 phy_index,
+ u32 ext_phy_type)
{
u8 rc = 0;
- u32 ext_phy_type;
-
- DP(NETIF_MSG_LINK, "Begin common phy init\n");
-
- /* Read the ext_phy_type for arbitrary port(0) */
- ext_phy_type = XGXS_EXT_PHY_TYPE(
- REG_RD(bp, shmem_base +
- offsetof(struct shmem_region,
- dev_info.port_hw_config[0].external_phy_config)));
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
- {
- rc = bnx2x_8073_common_init_phy(bp, shmem_base);
+ rc = bnx2x_8073_common_init_phy(bp, shmem_base,
+ shmem2_base, phy_index);
break;
- }
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC:
- rc = bnx2x_8727_common_init_phy(bp, shmem_base);
+ rc = bnx2x_8727_common_init_phy(bp, shmem_base,
+ shmem2_base, phy_index);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
/* GPIO1 affects both ports, so there's need to pull
it for single port alone */
- rc = bnx2x_8726_common_init_phy(bp, shmem_base);
+ rc = bnx2x_8726_common_init_phy(bp, shmem_base,
+ shmem2_base, phy_index);
+ break;
+ case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
+ rc = -EINVAL;
break;
default:
DP(NETIF_MSG_LINK,
@@ -6568,14 +6906,38 @@ u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
return rc;
}
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base)
+{
+ u8 rc = 0;
+ u8 phy_index;
+ u32 ext_phy_type, ext_phy_config;
+ DP(NETIF_MSG_LINK, "Begin common phy init\n");
+
+ if (CHIP_REV_IS_EMUL(bp))
+ return 0;
+
+ /* Read the ext_phy_type for arbitrary port(0) */
+ for (phy_index = EXT_PHY1; phy_index < MAX_PHYS;
+ phy_index++) {
+ ext_phy_config = bnx2x_get_ext_phy_config(bp,
+ shmem_base,
+ phy_index, 0);
+ ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
+ rc |= bnx2x_ext_phy_common_init(bp, shmem_base,
+ shmem2_base,
+ phy_index, ext_phy_type);
+ }
+ return rc;
+}
-u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base)
+u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base)
{
u8 phy_index;
struct bnx2x_phy phy;
for (phy_index = INT_PHY; phy_index < MAX_PHYS;
phy_index++) {
- if (bnx2x_populate_phy(bp, phy_index, shmem_base,
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
0, &phy) != 0) {
DP(NETIF_MSG_LINK, "populate phy failed\n");
return 0;
@@ -6589,13 +6951,14 @@ u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base)
u8 bnx2x_fan_failure_det_req(struct bnx2x *bp,
u32 shmem_base,
+ u32 shmem2_base,
u8 port)
{
u8 phy_index, fan_failure_det_req = 0;
struct bnx2x_phy phy;
for (phy_index = EXT_PHY1; phy_index < MAX_PHYS;
phy_index++) {
- if (bnx2x_populate_phy(bp, phy_index, shmem_base,
+ if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base,
port, &phy)
!= 0) {
DP(NETIF_MSG_LINK, "populate phy failed\n");
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 35f665f97be6..9115c125aeaf 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -59,13 +59,18 @@
#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1)
/* Single Media board contains single external phy */
#define SINGLE_MEDIA(params) (params->num_phys == 2)
+/* Dual Media board contains two external phy with different media */
+#define DUAL_MEDIA(params) (params->num_phys == 3)
+#define FW_PARAM_MDIO_CTRL_OFFSET 16
+#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
+ (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
/***********************************************************/
/* Structs */
/***********************************************************/
#define INT_PHY 0
#define EXT_PHY1 1
-
-#define MAX_PHYS 2
+#define EXT_PHY2 2
+#define MAX_PHYS 3
/* Same configuration is shared between the XGXS and the first external phy */
#define LINK_CONFIG_SIZE (MAX_PHYS - 1)
@@ -91,6 +96,8 @@ typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len);
typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params);
typedef void (*set_link_led_t)(struct bnx2x_phy *phy,
struct link_params *params, u8 mode);
+typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy,
+ struct link_params *params, u32 action);
struct bnx2x_phy {
u32 type;
@@ -106,7 +113,9 @@ struct bnx2x_phy {
/* Fan failure detection required */
#define FLAGS_FAN_FAILURE_DET_REQ (1<<2)
/* Initialize first the XGXS and only then the phy itself */
-#define FLAGS_INIT_XGXS_FIRST (1<<3)
+#define FLAGS_INIT_XGXS_FIRST (1<<3)
+#define FLAGS_REARM_LATCH_SIGNAL (1<<6)
+#define FLAGS_SFP_NOT_APPROVED (1<<7)
u8 def_md_devad;
u8 reserved;
@@ -161,6 +170,11 @@ struct bnx2x_phy {
/* Set link led mode (on/off/oper)*/
set_link_led_t set_link_led;
+
+ /* PHY Specific tasks */
+ phy_specific_func_t phy_specific_func;
+#define DISABLE_TX 1
+#define ENABLE_TX 2
};
/* Inputs parameters to the CLC */
@@ -177,18 +191,18 @@ struct link_params {
#define LOOPBACK_EXT_PHY 4
#define LOOPBACK_EXT 5
- u16 req_duplex;
- u16 req_flow_ctrl;
- u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
- req_flow_ctrl is set to AUTO */
- u16 req_line_speed; /* Also determine AutoNeg */
-
/* Device parameters */
u8 mac_addr[6];
+ u16 req_duplex[LINK_CONFIG_SIZE];
+ u16 req_flow_ctrl[LINK_CONFIG_SIZE];
+
+ u16 req_line_speed[LINK_CONFIG_SIZE]; /* Also determine AutoNeg */
+
/* shmem parameters */
u32 shmem_base;
- u32 speed_cap_mask;
+ u32 shmem2_base;
+ u32 speed_cap_mask[LINK_CONFIG_SIZE];
u32 switch_cfg;
#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH
#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH
@@ -202,6 +216,7 @@ struct link_params {
u32 feature_config_flags;
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
+#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3)
/* Will be populated during common init */
struct bnx2x_phy phy[MAX_PHYS];
@@ -210,9 +225,12 @@ struct link_params {
u8 rsrv;
u16 hw_led_mode; /* part of the hw_config read from the shmem */
+ u32 multi_phy_config;
/* Device pointer passed to all callback functions */
struct bnx2x *bp;
+ u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
+ req_flow_ctrl is set to AUTO */
};
/* Output parameters */
@@ -233,12 +251,6 @@ struct link_vars {
u16 flow_ctrl;
u16 ieee_fc;
- u32 autoneg;
-#define AUTO_NEG_DISABLED 0x0
-#define AUTO_NEG_ENABLED 0x1
-#define AUTO_NEG_COMPLETE 0x2
-#define AUTO_NEG_PARALLEL_DETECTION_USED 0x3
-
/* The same definitions as the shmem parameter */
u32 link_status;
};
@@ -246,8 +258,6 @@ struct link_vars {
/***********************************************************/
/* Functions */
/***********************************************************/
-
-/* Initialize the phy */
u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output);
/* Reset the link. Should be called when driver or interface goes down
@@ -298,10 +308,11 @@ void bnx2x_handle_module_detect_int(struct link_params *params);
/* Get the actual link status. In case it returns 0, link is up,
otherwise link is down*/
-u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
+u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars,
+ u8 is_serdes);
/* One-time initialization for external phy after power up */
-u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
+u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base, u32 shmem2_base);
/* Reset the external PHY using GPIO */
void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
@@ -316,12 +327,19 @@ u8 bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
void bnx2x_hw_reset_phy(struct link_params *params);
/* Checks if HW lock is required for this phy/board type */
-u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base);
+u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base);
+
/* Returns the aggregative supported attributes of the phys on board */
u32 bnx2x_supported_attr(struct link_params *params, u8 phy_idx);
+
+/* Check swap bit and adjust PHY order */
+u32 bnx2x_phy_selection(struct link_params *params);
+
/* Probe the phys on board, and populate them in "params" */
u8 bnx2x_phy_probe(struct link_params *params);
/* Checks if fan failure detection is required on one of the phys on board */
-u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base, u8 port);
+u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
+ u32 shmem2_base, u8 port);
#endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 30618c7ed4ed..f0a788467fb1 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -1227,26 +1227,66 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
return 0;
}
+int bnx2x_get_link_cfg_idx(struct bnx2x *bp)
+{
+ u32 sel_phy_idx = 0;
+ if (bp->link_vars.link_up) {
+ sel_phy_idx = EXT_PHY1;
+ /* In case link is SERDES, check if the EXT_PHY2 is the one */
+ if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) &&
+ (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE))
+ sel_phy_idx = EXT_PHY2;
+ } else {
+
+ switch (bnx2x_phy_selection(&bp->link_params)) {
+ case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
+ sel_phy_idx = EXT_PHY1;
+ break;
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY:
+ case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY:
+ sel_phy_idx = EXT_PHY2;
+ break;
+ }
+ }
+ /*
+ * The selected actived PHY is always after swapping (in case PHY
+ * swapping is enabled). So when swapping is enabled, we need to reverse
+ * the configuration
+ */
+
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+ if (sel_phy_idx == EXT_PHY1)
+ sel_phy_idx = EXT_PHY2;
+ else if (sel_phy_idx == EXT_PHY2)
+ sel_phy_idx = EXT_PHY1;
+ }
+ return LINK_CONFIG_IDX(sel_phy_idx);
+}
+
void bnx2x_calc_fc_adv(struct bnx2x *bp)
{
+ u8 cfg_idx = bnx2x_get_link_cfg_idx(bp);
switch (bp->link_vars.ieee_fc &
MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
- bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
+ bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH:
- bp->port.advertising |= (ADVERTISED_Asym_Pause |
+ bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC:
- bp->port.advertising |= ADVERTISED_Asym_Pause;
+ bp->port.advertising[cfg_idx] |= ADVERTISED_Asym_Pause;
break;
default:
- bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
+ bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause |
ADVERTISED_Pause);
break;
}
@@ -1257,7 +1297,8 @@ u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
{
if (!BP_NOMCP(bp)) {
u8 rc;
-
+ int cfx_idx = bnx2x_get_link_cfg_idx(bp);
+ u16 req_line_speed = bp->link_params.req_line_speed[cfx_idx];
/* Initialize link parameters structure variables */
/* It is recommended to turn off RX FC for jumbo frames
for better performance */
@@ -1268,8 +1309,10 @@ u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
bnx2x_acquire_phy_lock(bp);
- if (load_mode == LOAD_DIAG)
+ if (load_mode == LOAD_DIAG) {
bp->link_params.loopback_mode = LOOPBACK_XGXS;
+ bp->link_params.req_line_speed[cfx_idx] = SPEED_10000;
+ }
rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
@@ -1281,7 +1324,7 @@ u8 bnx2x_initial_phy_init(struct bnx2x *bp, int load_mode)
bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
bnx2x_link_report(bp);
}
-
+ bp->link_params.req_line_speed[cfx_idx] = req_line_speed;
return rc;
}
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
@@ -1311,13 +1354,14 @@ static void bnx2x__link_reset(struct bnx2x *bp)
BNX2X_ERR("Bootcode is missing - can not reset link\n");
}
-u8 bnx2x_link_test(struct bnx2x *bp)
+u8 bnx2x_link_test(struct bnx2x *bp, u8 is_serdes)
{
u8 rc = 0;
if (!BP_NOMCP(bp)) {
bnx2x_acquire_phy_lock(bp);
- rc = bnx2x_test_link(&bp->link_params, &bp->link_vars);
+ rc = bnx2x_test_link(&bp->link_params, &bp->link_vars,
+ is_serdes);
bnx2x_release_phy_lock(bp);
} else
BNX2X_ERR("Bootcode is missing - can not test link\n");
@@ -1586,7 +1630,7 @@ static void bnx2x_pmf_update(struct bnx2x *bp)
*/
/* send the MCP a request, block until there is a reply */
-u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
+u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
{
int func = BP_FUNC(bp);
u32 seq = ++bp->fw_seq;
@@ -1595,6 +1639,7 @@ u32 bnx2x_fw_command(struct bnx2x *bp, u32 command)
u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
mutex_lock(&bp->fw_mb_mutex);
+ SHMEM_WR(bp, func_mb[func].drv_mb_param, param);
SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
@@ -1716,9 +1761,9 @@ static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
/* Report results to MCP */
if (dcc_event)
- bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_FAILURE, 0);
else
- bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK, 0);
}
/* must be called under the spq lock */
@@ -3848,6 +3893,7 @@ static void bnx2x_setup_fan_failure_detection(struct bnx2x *bp)
bnx2x_fan_failure_det_req(
bp,
bp->common.shmem_base,
+ bp->common.shmem2_base,
port);
}
@@ -4116,7 +4162,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
}
bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
- bp->common.shmem_base);
+ bp->common.shmem_base,
+ bp->common.shmem2_base);
bnx2x_setup_fan_failure_detection(bp);
@@ -4129,7 +4176,8 @@ static int bnx2x_init_common(struct bnx2x *bp)
if (!BP_NOMCP(bp)) {
bnx2x_acquire_phy_lock(bp);
- bnx2x_common_init_phy(bp, bp->common.shmem_base);
+ bnx2x_common_init_phy(bp, bp->common.shmem_base,
+ bp->common.shmem2_base);
bnx2x_release_phy_lock(bp);
} else
BNX2X_ERR("Bootcode is missing - can not initialize link\n");
@@ -4265,10 +4313,10 @@ static int bnx2x_init_port(struct bnx2x *bp)
bnx2x_init_block(bp, MCP_BLOCK, init_stage);
bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
bp->port.need_hw_lock = bnx2x_hw_lock_required(bp,
- bp->common.shmem_base);
-
+ bp->common.shmem_base,
+ bp->common.shmem2_base);
if (bnx2x_fan_failure_det_req(bp, bp->common.shmem_base,
- port)) {
+ bp->common.shmem2_base, port)) {
u32 reg_addr = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
val = REG_RD(bp, reg_addr);
@@ -5226,7 +5274,7 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
unload_error:
if (!BP_NOMCP(bp))
- reset_code = bnx2x_fw_command(bp, reset_code);
+ reset_code = bnx2x_fw_command(bp, reset_code, 0);
else {
DP(NETIF_MSG_IFDOWN, "NO MCP - load counts %d, %d, %d\n",
load_count[0], load_count[1], load_count[2]);
@@ -5251,7 +5299,7 @@ unload_error:
/* Report UNLOAD_DONE to MCP */
if (!BP_NOMCP(bp))
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
}
@@ -5816,13 +5864,14 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
- reset_code = bnx2x_fw_command(bp, reset_code);
+ reset_code = bnx2x_fw_command(bp, reset_code, 0);
/* if UNDI is loaded on the other port */
if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
/* send "DONE" for previous unload */
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bnx2x_fw_command(bp,
+ DRV_MSG_CODE_UNLOAD_DONE, 0);
/* unload UNDI on port 1 */
bp->func = 1;
@@ -5831,7 +5880,7 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
DRV_MSG_SEQ_NUMBER_MASK);
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
- bnx2x_fw_command(bp, reset_code);
+ bnx2x_fw_command(bp, reset_code, 0);
}
/* now it's safe to release the lock */
@@ -5873,7 +5922,7 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
/* send unload done to the MCP */
- bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
+ bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
/* restore our func and fw_seq */
bp->func = func;
@@ -5921,6 +5970,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
bp->common.shmem_base = REG_RD(bp, MISC_REG_SHARED_MEM_ADDR);
bp->common.shmem2_base = REG_RD(bp, MISC_REG_GENERIC_CR_0);
bp->link_params.shmem_base = bp->common.shmem_base;
+ bp->link_params.shmem2_base = bp->common.shmem2_base;
BNX2X_DEV_INFO("shmem offset 0x%x shmem2 offset 0x%x\n",
bp->common.shmem_base, bp->common.shmem2_base);
@@ -5963,8 +6013,11 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
"please upgrade BC\n", BNX2X_BC_VER, val);
}
bp->link_params.feature_config_flags |=
- (val >= REQ_BC_VER_4_VRFY_OPT_MDL) ?
+ (val >= REQ_BC_VER_4_VRFY_FIRST_PHY_OPT_MDL) ?
FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY : 0;
+ bp->link_params.feature_config_flags |=
+ (val >= REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL) ?
+ FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY : 0;
if (BP_E1HVN(bp) == 0) {
pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_PMC, &pmc);
@@ -5988,22 +6041,44 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
u32 switch_cfg)
{
- int port = BP_PORT(bp);
- bp->port.supported = 0;
+ int cfg_size = 0, idx, port = BP_PORT(bp);
+
+ /* Aggregation of supported attributes of all external phys */
+ bp->port.supported[0] = 0;
+ bp->port.supported[1] = 0;
switch (bp->link_params.num_phys) {
case 1:
- bp->port.supported = bp->link_params.phy[INT_PHY].supported;
- break;
+ bp->port.supported[0] = bp->link_params.phy[INT_PHY].supported;
+ cfg_size = 1;
+ break;
case 2:
- bp->port.supported = bp->link_params.phy[EXT_PHY1].supported;
- break;
+ bp->port.supported[0] = bp->link_params.phy[EXT_PHY1].supported;
+ cfg_size = 1;
+ break;
+ case 3:
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED) {
+ bp->port.supported[1] =
+ bp->link_params.phy[EXT_PHY1].supported;
+ bp->port.supported[0] =
+ bp->link_params.phy[EXT_PHY2].supported;
+ } else {
+ bp->port.supported[0] =
+ bp->link_params.phy[EXT_PHY1].supported;
+ bp->port.supported[1] =
+ bp->link_params.phy[EXT_PHY2].supported;
+ }
+ cfg_size = 2;
+ break;
}
- if (!(bp->port.supported)) {
+ if (!(bp->port.supported[0] || bp->port.supported[1])) {
BNX2X_ERR("NVRAM config error. BAD phy config."
- "PHY1 config 0x%x\n",
+ "PHY1 config 0x%x, PHY2 config 0x%x\n",
SHMEM_RD(bp,
- dev_info.port_hw_config[port].external_phy_config));
+ dev_info.port_hw_config[port].external_phy_config),
+ SHMEM_RD(bp,
+ dev_info.port_hw_config[port].external_phy_config2));
return;
}
@@ -6023,147 +6098,183 @@ static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
default:
BNX2X_ERR("BAD switch_cfg link_config 0x%x\n",
- bp->port.link_config);
+ bp->port.link_config[0]);
return;
}
- /* mask what we support according to speed_cap_mask */
- if (!(bp->link_params.speed_cap_mask &
+ /* mask what we support according to speed_cap_mask per configuration */
+ for (idx = 0; idx < cfg_size; idx++) {
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
- bp->port.supported &= ~SUPPORTED_10baseT_Half;
+ bp->port.supported[idx] &= ~SUPPORTED_10baseT_Half;
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL))
- bp->port.supported &= ~SUPPORTED_10baseT_Full;
+ bp->port.supported[idx] &= ~SUPPORTED_10baseT_Full;
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))
- bp->port.supported &= ~SUPPORTED_100baseT_Half;
+ bp->port.supported[idx] &= ~SUPPORTED_100baseT_Half;
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL))
- bp->port.supported &= ~SUPPORTED_100baseT_Full;
+ bp->port.supported[idx] &= ~SUPPORTED_100baseT_Full;
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G))
- bp->port.supported &= ~(SUPPORTED_1000baseT_Half |
+ bp->port.supported[idx] &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
- bp->port.supported &= ~SUPPORTED_2500baseX_Full;
+ bp->port.supported[idx] &= ~SUPPORTED_2500baseX_Full;
- if (!(bp->link_params.speed_cap_mask &
+ if (!(bp->link_params.speed_cap_mask[idx] &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10G))
- bp->port.supported &= ~SUPPORTED_10000baseT_Full;
+ bp->port.supported[idx] &= ~SUPPORTED_10000baseT_Full;
+
+ }
- BNX2X_DEV_INFO("supported 0x%x\n", bp->port.supported);
+ BNX2X_DEV_INFO("supported 0x%x 0x%x\n", bp->port.supported[0],
+ bp->port.supported[1]);
}
static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
{
- bp->link_params.req_duplex = DUPLEX_FULL;
-
- switch (bp->port.link_config & PORT_FEATURE_LINK_SPEED_MASK) {
+ u32 link_config, idx, cfg_size = 0;
+ bp->port.advertising[0] = 0;
+ bp->port.advertising[1] = 0;
+ switch (bp->link_params.num_phys) {
+ case 1:
+ case 2:
+ cfg_size = 1;
+ break;
+ case 3:
+ cfg_size = 2;
+ break;
+ }
+ for (idx = 0; idx < cfg_size; idx++) {
+ bp->link_params.req_duplex[idx] = DUPLEX_FULL;
+ link_config = bp->port.link_config[idx];
+ switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_AUTO:
- if (bp->port.supported & SUPPORTED_Autoneg) {
- bp->link_params.req_line_speed = SPEED_AUTO_NEG;
- bp->port.advertising = bp->port.supported;
+ if (bp->port.supported[idx] & SUPPORTED_Autoneg) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_AUTO_NEG;
+ bp->port.advertising[idx] |=
+ bp->port.supported[idx];
} else {
- /* force 10G, no AN */
- bp->link_params.req_line_speed = SPEED_10000;
- bp->port.advertising = (ADVERTISED_10000baseT_Full |
+ /* force 10G, no AN */
+ bp->link_params.req_line_speed[idx] =
+ SPEED_10000;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
+ continue;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_FULL:
- if (bp->port.supported & SUPPORTED_10baseT_Full) {
- bp->link_params.req_line_speed = SPEED_10;
- bp->port.advertising = (ADVERTISED_10baseT_Full |
+ if (bp->port.supported[idx] & SUPPORTED_10baseT_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_10;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_10baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_10M_HALF:
- if (bp->port.supported & SUPPORTED_10baseT_Half) {
- bp->link_params.req_line_speed = SPEED_10;
- bp->link_params.req_duplex = DUPLEX_HALF;
- bp->port.advertising = (ADVERTISED_10baseT_Half |
+ if (bp->port.supported[idx] & SUPPORTED_10baseT_Half) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_10;
+ bp->link_params.req_duplex[idx] =
+ DUPLEX_HALF;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_10baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_FULL:
- if (bp->port.supported & SUPPORTED_100baseT_Full) {
- bp->link_params.req_line_speed = SPEED_100;
- bp->port.advertising = (ADVERTISED_100baseT_Full |
+ if (bp->port.supported[idx] & SUPPORTED_100baseT_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_100;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_100baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
- if (bp->port.supported & SUPPORTED_100baseT_Half) {
- bp->link_params.req_line_speed = SPEED_100;
- bp->link_params.req_duplex = DUPLEX_HALF;
- bp->port.advertising = (ADVERTISED_100baseT_Half |
+ if (bp->port.supported[idx] & SUPPORTED_100baseT_Half) {
+ bp->link_params.req_line_speed[idx] = SPEED_100;
+ bp->link_params.req_duplex[idx] = DUPLEX_HALF;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_100baseT_Half |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_1G:
- if (bp->port.supported & SUPPORTED_1000baseT_Full) {
- bp->link_params.req_line_speed = SPEED_1000;
- bp->port.advertising = (ADVERTISED_1000baseT_Full |
+ if (bp->port.supported[idx] &
+ SUPPORTED_1000baseT_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_1000;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_1000baseT_Full |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
case PORT_FEATURE_LINK_SPEED_2_5G:
- if (bp->port.supported & SUPPORTED_2500baseX_Full) {
- bp->link_params.req_line_speed = SPEED_2500;
- bp->port.advertising = (ADVERTISED_2500baseX_Full |
+ if (bp->port.supported[idx] &
+ SUPPORTED_2500baseX_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_2500;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_2500baseX_Full |
ADVERTISED_TP);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
@@ -6171,16 +6282,19 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
case PORT_FEATURE_LINK_SPEED_10G_CX4:
case PORT_FEATURE_LINK_SPEED_10G_KX4:
case PORT_FEATURE_LINK_SPEED_10G_KR:
- if (bp->port.supported & SUPPORTED_10000baseT_Full) {
- bp->link_params.req_line_speed = SPEED_10000;
- bp->port.advertising = (ADVERTISED_10000baseT_Full |
+ if (bp->port.supported[idx] &
+ SUPPORTED_10000baseT_Full) {
+ bp->link_params.req_line_speed[idx] =
+ SPEED_10000;
+ bp->port.advertising[idx] |=
+ (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
} else {
BNX2X_ERROR("NVRAM config error. "
"Invalid link_config 0x%x"
" speed_cap_mask 0x%x\n",
- bp->port.link_config,
- bp->link_params.speed_cap_mask);
+ link_config,
+ bp->link_params.speed_cap_mask[idx]);
return;
}
break;
@@ -6188,23 +6302,28 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
default:
BNX2X_ERROR("NVRAM config error. "
"BAD link speed link_config 0x%x\n",
- bp->port.link_config);
- bp->link_params.req_line_speed = SPEED_AUTO_NEG;
- bp->port.advertising = bp->port.supported;
+ link_config);
+ bp->link_params.req_line_speed[idx] = SPEED_AUTO_NEG;
+ bp->port.advertising[idx] = bp->port.supported[idx];
break;
}
- bp->link_params.req_flow_ctrl = (bp->port.link_config &
+ bp->link_params.req_flow_ctrl[idx] = (link_config &
PORT_FEATURE_FLOW_CONTROL_MASK);
- if ((bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
- !(bp->port.supported & SUPPORTED_Autoneg))
- bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
+ if ((bp->link_params.req_flow_ctrl[idx] ==
+ BNX2X_FLOW_CTRL_AUTO) &&
+ !(bp->port.supported[idx] & SUPPORTED_Autoneg)) {
+ bp->link_params.req_flow_ctrl[idx] =
+ BNX2X_FLOW_CTRL_NONE;
+ }
- BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl 0x%x"
- " advertising 0x%x\n",
- bp->link_params.req_line_speed,
- bp->link_params.req_duplex,
- bp->link_params.req_flow_ctrl, bp->port.advertising);
+ BNX2X_DEV_INFO("req_line_speed %d req_duplex %d req_flow_ctrl"
+ " 0x%x advertising 0x%x\n",
+ bp->link_params.req_line_speed[idx],
+ bp->link_params.req_duplex[idx],
+ bp->link_params.req_flow_ctrl[idx],
+ bp->port.advertising[idx]);
+ }
}
static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
@@ -6228,14 +6347,20 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
- bp->link_params.speed_cap_mask =
+ bp->link_params.speed_cap_mask[0] =
SHMEM_RD(bp,
dev_info.port_hw_config[port].speed_capability_mask);
-
- bp->port.link_config =
+ bp->link_params.speed_cap_mask[1] =
+ SHMEM_RD(bp,
+ dev_info.port_hw_config[port].speed_capability_mask2);
+ bp->port.link_config[0] =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
+ bp->port.link_config[1] =
+ SHMEM_RD(bp, dev_info.port_feature_config[port].link_config2);
+ bp->link_params.multi_phy_config =
+ SHMEM_RD(bp, dev_info.port_hw_config[port].multi_phy_config);
/* If the device is capable of WoL, set the default state according
* to the HW
*/
@@ -6244,11 +6369,12 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
(config & PORT_FEATURE_WOL_ENABLED));
BNX2X_DEV_INFO("lane_config 0x%08x"
- " speed_cap_mask 0x%08x link_config 0x%08x\n",
+ "speed_cap_mask0 0x%08x link_config0 0x%08x\n",
bp->link_params.lane_config,
- bp->link_params.speed_cap_mask, bp->port.link_config);
+ bp->link_params.speed_cap_mask[0],
+ bp->port.link_config[0]);
- bp->link_params.switch_cfg |= (bp->port.link_config &
+ bp->link_params.switch_cfg = (bp->port.link_config[0] &
PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_phy_probe(&bp->link_params);
bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 398cf55b8e10..f0a69563b66a 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -4964,6 +4964,8 @@
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN 0x0001
#define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR 0x0040
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1 0x14
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII 0x0001
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK 0x0002
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX 0x0004
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK 0x0018
#define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT 3
@@ -5192,6 +5194,8 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_XS_8706_REG_BANK_RX3 0x80ec
#define MDIO_XS_8706_REG_BANK_RXA 0x80fc
+#define MDIO_XS_REG_8073_RX_CTRL_PCIE 0x80FA
+
#define MDIO_AN_DEVAD 0x7
/*ieee*/
#define MDIO_AN_REG_CTRL 0x0000
@@ -5227,6 +5231,27 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_AN_REG_8481_AUX_CTRL 0xfff8
#define MDIO_AN_REG_8481_LEGACY_SHADOW 0xfffc
+/* BCM84823 only */
+#define MDIO_CTL_DEVAD 0x1e
+#define MDIO_CTL_REG_84823_MEDIA 0x401a
+#define MDIO_CTL_REG_84823_MEDIA_MAC_MASK 0x0018
+ /* These pins configure the BCM84823 interface to MAC after reset. */
+#define MDIO_CTL_REG_84823_CTRL_MAC_XFI 0x0008
+#define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M 0x0010
+ /* These pins configure the BCM84823 interface to Line after reset. */
+#define MDIO_CTL_REG_84823_MEDIA_LINE_MASK 0x0060
+#define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L 0x0020
+#define MDIO_CTL_REG_84823_MEDIA_LINE_XFI 0x0040
+ /* When this pin is active high during reset, 10GBASE-T core is power
+ * down, When it is active low the 10GBASE-T is power up
+ */
+#define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN 0x0080
+#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK 0x0100
+#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER 0x0000
+#define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER 0x0100
+#define MDIO_CTL_REG_84823_MEDIA_FIBER_1G 0x1000
+
+
#define IGU_FUNC_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000