summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStephen Hemminger <shemminger@linux-foundation.org>2007-10-16 12:15:49 -0700
committerJeff Garzik <jeff@garzik.org>2007-10-16 21:10:28 -0400
commit7fb7ac241162dc51ec0f7644d4a97b2855213c32 (patch)
treef16d164d20f4335a0f9fffd768b57cc18d68f932
parent298e1a9ebe37662f2145c07b678ebd09b86c020a (diff)
skge: fix ram buffer size calculation
This fixes problems with transmit hangs on older fiber based SysKonnect boards. Adjust ram buffer sizing calculation to make it correct on all boards and make it like the code in sky2 driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-rw-r--r--drivers/net/skge.c51
1 files changed, 24 insertions, 27 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 2aae9fe38c5a..e593585f8bf7 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2403,32 +2403,31 @@ static int skge_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
return err;
}
-static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, size_t len)
+/* Assign Ram Buffer allocation to queue */
+static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, u32 space)
{
u32 end;
- start /= 8;
- len /= 8;
- end = start + len - 1;
+ /* convert from K bytes to qwords used for hw register */
+ start *= 1024/8;
+ space *= 1024/8;
+ end = start + space - 1;
skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR);
skge_write32(hw, RB_ADDR(q, RB_START), start);
+ skge_write32(hw, RB_ADDR(q, RB_END), end);
skge_write32(hw, RB_ADDR(q, RB_WP), start);
skge_write32(hw, RB_ADDR(q, RB_RP), start);
- skge_write32(hw, RB_ADDR(q, RB_END), end);
if (q == Q_R1 || q == Q_R2) {
+ u32 tp = space - space/4;
+
/* Set thresholds on receive queue's */
- skge_write32(hw, RB_ADDR(q, RB_RX_UTPP),
- start + (2*len)/3);
- skge_write32(hw, RB_ADDR(q, RB_RX_LTPP),
- start + (len/3));
- } else {
- /* Enable store & forward on Tx queue's because
- * Tx FIFO is only 4K on Genesis and 1K on Yukon
- */
+ skge_write32(hw, RB_ADDR(q, RB_RX_UTPP), tp);
+ skge_write32(hw, RB_ADDR(q, RB_RX_LTPP), space/4);
+ } else if (hw->chip_id != CHIP_ID_GENESIS)
+ /* Genesis Tx Fifo is too small for normal store/forward */
skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD);
- }
skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD);
}
@@ -2456,7 +2455,7 @@ static int skge_up(struct net_device *dev)
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
int port = skge->port;
- u32 chunk, ram_addr;
+ u32 ramaddr, ramsize, rxspace;
size_t rx_size, tx_size;
int err;
@@ -2511,14 +2510,15 @@ static int skge_up(struct net_device *dev)
spin_unlock_bh(&hw->phy_lock);
/* Configure RAMbuffers */
- chunk = hw->ram_size / ((hw->ports + 1)*2);
- ram_addr = hw->ram_offset + 2 * chunk * port;
+ ramsize = (hw->ram_size - hw->ram_offset) / hw->ports;
+ ramaddr = hw->ram_offset + port * ramsize;
+ rxspace = 8 + (2*(ramsize - 16))/3;
- skge_ramset(hw, rxqaddr[port], ram_addr, chunk);
- skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean);
+ skge_ramset(hw, rxqaddr[port], ramaddr, rxspace);
+ skge_ramset(hw, txqaddr[port], ramaddr + rxspace, ramsize - rxspace);
+ skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean);
BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean);
- skge_ramset(hw, txqaddr[port], ram_addr+chunk, chunk);
skge_qset(skge, txqaddr[port], skge->tx_ring.to_use);
/* Start receiver BMU */
@@ -3450,15 +3450,12 @@ static int skge_reset(struct skge_hw *hw)
if (hw->chip_id == CHIP_ID_GENESIS) {
if (t8 == 3) {
/* special case: 4 x 64k x 36, offset = 0x80000 */
- hw->ram_size = 0x100000;
- hw->ram_offset = 0x80000;
+ hw->ram_size = 1024;
+ hw->ram_offset = 512;
} else
hw->ram_size = t8 * 512;
- }
- else if (t8 == 0)
- hw->ram_size = 0x20000;
- else
- hw->ram_size = t8 * 4096;
+ } else /* Yukon */
+ hw->ram_size = t8 ? t8 * 4 : 128;
hw->intr_mask = IS_HW_ERR;