[SCSI] scsi_debug: error processing

After discussions in the thread titled:
    [PATCH] scsi_debug: illegal blocking memory allocation
here is a patch containing the discussed fix and some other
fixes and additions. The patch is against lk 2.6.20-rc3 .
The version is bumped to 1.81 .

ChangeLog:
  - Change several GFP_KERNEL allocations to GFP_ATOMIC
    as they can be called from queuecommand() context
  - check above allocation returns and if out of memory
    report DID_REQUEUE in two cases, DID_NO_CONNECT in
    another, and fail slave configure() in another
  - add support for WRITE BUFFER command
  - add aborted_command error injection support
    (opts mask 0x10), similar mechanism to
    recovered_error injection.

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 33 insertions, 9 deletions

diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 30ee3d72c021..5adbbeedec38 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -51,10 +51,10 @@
 #include "scsi_logging.h"
 #include "scsi_debug.h"
 
-#define SCSI_DEBUG_VERSION "1.80"
-static const char * scsi_debug_version_date = "20061018";
+#define SCSI_DEBUG_VERSION "1.81"
+static const char * scsi_debug_version_date = "20070104";
 
-/* Additional Sense Code (ASC) used */
+/* Additional Sense Code (ASC) */
 #define NO_ADDITIONAL_SENSE 0x0
 #define LOGICAL_UNIT_NOT_READY 0x4
 #define UNRECOVERED_READ_ERR 0x11
@@ -65,9 +65,13 @@ static const char * scsi_debug_version_date = "20061018";
 #define INVALID_FIELD_IN_PARAM_LIST 0x26
 #define POWERON_RESET 0x29
 #define SAVING_PARAMS_UNSUP 0x39
+#define TRANSPORT_PROBLEM 0x4b
 #define THRESHOLD_EXCEEDED 0x5d
 #define LOW_POWER_COND_ON 0x5e
 
+/* Additional Sense Code Qualifier (ASCQ) */
+#define ACK_NAK_TO 0x3
+
 #define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
 
 /* Default values for driver parameters */
@@ -95,15 +99,20 @@ static const char * scsi_debug_version_date = "20061018";
 #define SCSI_DEBUG_OPT_MEDIUM_ERR   2
 #define SCSI_DEBUG_OPT_TIMEOUT   4
 #define SCSI_DEBUG_OPT_RECOVERED_ERR   8
+#define SCSI_DEBUG_OPT_TRANSPORT_ERR   16
 /* When "every_nth" > 0 then modulo "every_nth" commands:
  *   - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
  *   - a RECOVERED_ERROR is simulated on successful read and write
  *     commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ *   - a TRANSPORT_ERROR is simulated on successful read and write
+ *     commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
  *
  * When "every_nth" < 0 then after "- every_nth" commands:
  *   - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
  *   - a RECOVERED_ERROR is simulated on successful read and write
  *     commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
+ *   - a TRANSPORT_ERROR is simulated on successful read and write
+ *     commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
  * This will continue until some other action occurs (e.g. the user
  * writing a new value (other than -1 or 1) to every_nth via sysfs).
  */
@@ -315,6 +324,7 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
 	int target = SCpnt->device->id;
 	struct sdebug_dev_info * devip = NULL;
 	int inj_recovered = 0;
+	int inj_transport = 0;
 	int delay_override = 0;
 
 	if (done == NULL)
@@ -352,6 +362,8 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
 			return 0; /* ignore command causing timeout */
 		else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
 			inj_recovered = 1; /* to reads and writes below */
+		else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
+			inj_transport = 1; /* to reads and writes below */
         }
 
 	if (devip->wlun) {
@@ -468,7 +480,11 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
 			mk_sense_buffer(devip, RECOVERED_ERROR,
 					THRESHOLD_EXCEEDED, 0);
 			errsts = check_condition_result;
-		}
+		} else if (inj_transport && (0 == errsts)) {
+                        mk_sense_buffer(devip, ABORTED_COMMAND,
+                                        TRANSPORT_PROBLEM, ACK_NAK_TO);
+                        errsts = check_condition_result;
+                }
 		break;
 	case REPORT_LUNS:	/* mandatory, ignore unit attention */
 		delay_override = 1;
@@ -531,6 +547,9 @@ int scsi_debug_queuecommand(struct scsi_cmnd * SCpnt, done_funct_t done)
 		delay_override = 1;
 		errsts = check_readiness(SCpnt, 0, devip);
 		break;
+	case WRITE_BUFFER:
+		errsts = check_readiness(SCpnt, 1, devip);
+		break;
 	default:
 		if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
 			printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
@@ -954,7 +973,9 @@ static int resp_inquiry(struct scsi_cmnd * scp, int target,
 	int alloc_len, n, ret;
 
 	alloc_len = (cmd[3] << 8) + cmd[4];
-	arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_KERNEL);
+	arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
+	if (! arr)
+		return DID_REQUEUE << 16;
 	if (devip->wlun)
 		pq_pdt = 0x1e;	/* present, wlun */
 	else if (scsi_debug_no_lun_0 && (0 == devip->lun))
@@ -1217,7 +1238,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd * scp,
 	alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
 		+ cmd[9]);
 
-	arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_KERNEL);
+	arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
+	if (! arr)
+		return DID_REQUEUE << 16;
 	/*
 	 * EVPD page 0x88 states we have two ports, one
 	 * real and a fake port with no device connected.
@@ -1996,6 +2019,8 @@ static int scsi_debug_slave_configure(struct scsi_device * sdp)
 	if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
 		sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
 	devip = devInfoReg(sdp);
+	if (NULL == devip)
+		return 1;	/* no resources, will be marked offline */
 	sdp->hostdata = devip;
 	if (sdp->host->cmd_per_lun)
 		scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING,
@@ -2044,7 +2069,7 @@ static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
 		}
 	}
 	if (NULL == open_devip) { /* try and make a new one */
-		open_devip = kzalloc(sizeof(*open_devip),GFP_KERNEL);
+		open_devip = kzalloc(sizeof(*open_devip),GFP_ATOMIC);
 		if (NULL == open_devip) {
 			printk(KERN_ERR "%s: out of memory at line %d\n",
 				__FUNCTION__, __LINE__);
@@ -2388,7 +2413,7 @@ MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
 MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
 MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
 MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
-MODULE_PARM_DESC(opts, "1->noise, 2->medium_error, 4->... (def=0)");
+MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
 MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
 MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
 MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
@@ -2943,7 +2968,6 @@ static int sdebug_add_adapter(void)
         struct list_head *lh, *lh_sf;
 
         sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
-
         if (NULL == sdbg_host) {
                 printk(KERN_ERR "%s: out of memory at line %d\n",
                        __FUNCTION__, __LINE__);