diff options
Diffstat (limited to 'drivers/console')
-rw-r--r-- | drivers/console/aarch64/console.S | 106 | ||||
-rw-r--r-- | drivers/console/aarch64/deprecated_console.S | 110 | ||||
-rw-r--r-- | drivers/console/aarch64/multi_console.S | 260 | ||||
-rw-r--r-- | drivers/console/aarch64/skeleton_console.S | 184 |
4 files changed, 504 insertions, 156 deletions
diff --git a/drivers/console/aarch64/console.S b/drivers/console/aarch64/console.S index 7cc04ddd..f847ed59 100644 --- a/drivers/console/aarch64/console.S +++ b/drivers/console/aarch64/console.S @@ -1,105 +1,11 @@ /* - * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ -#include <asm_macros.S> - .globl console_init - .globl console_uninit - .globl console_putc - .globl console_getc - .globl console_flush - - /* - * The console base is in the data section and not in .bss - * even though it is zero-init. In particular, this allows - * the console functions to start using this variable before - * the runtime memory is initialized for images which do not - * need to copy the .data section from ROM to RAM. - */ -.section .data.console_base ; .align 3 - console_base: .quad 0x0 - - /* ----------------------------------------------- - * int console_init(uintptr_t base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. It saves - * the console base to the data section. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * out: return 1 on success else 0 on error - * Clobber list : x1 - x4 - * ----------------------------------------------- - */ -func console_init - /* Check the input base address */ - cbz x0, init_fail - adrp x3, console_base - str x0, [x3, :lo12:console_base] - b console_core_init -init_fail: - ret -endfunc console_init - - /* ----------------------------------------------- - * void console_uninit(void) - * Function to finish the use of console driver. - * It sets the console_base as NULL so that any - * further invocation of `console_putc` or - * `console_getc` APIs would return error. - * ----------------------------------------------- - */ -func console_uninit - mov x0, #0 - adrp x3, console_base - str x0, [x3, :lo12:console_base] - ret -endfunc console_uninit - - /* --------------------------------------------- - * int console_putc(int c) - * Function to output a character over the - * console. It returns the character printed on - * success or -1 on error. - * In : x0 - character to be printed - * Out : return -1 on error else return character. - * Clobber list : x1, x2 - * --------------------------------------------- - */ -func console_putc - adrp x2, console_base - ldr x1, [x2, :lo12:console_base] - b console_core_putc -endfunc console_putc - - /* --------------------------------------------- - * int console_getc(void) - * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_getc - adrp x1, console_base - ldr x0, [x1, :lo12:console_base] - b console_core_getc -endfunc console_getc - - /* --------------------------------------------- - * int console_flush(void) - * Function to force a write of all buffered - * data that hasn't been output. It returns 0 - * upon successful completion, otherwise it - * returns -1. - * Clobber list : x0, x1 - * --------------------------------------------- - */ -func console_flush - adrp x1, console_base - ldr x0, [x1, :lo12:console_base] - b console_core_flush -endfunc console_flush +#if MULTI_CONSOLE_API +#include "multi_console.S" +#else +#include "deprecated_console.S" +#endif diff --git a/drivers/console/aarch64/deprecated_console.S b/drivers/console/aarch64/deprecated_console.S new file mode 100644 index 00000000..c83e2467 --- /dev/null +++ b/drivers/console/aarch64/deprecated_console.S @@ -0,0 +1,110 @@ +/* + * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#include <asm_macros.S> + +/* + * This is the common console core code for the deprecated single-console API. + * New platforms should set MULTI_CONSOLE_API=1 and not use this file. + */ + + .globl console_init + .globl console_uninit + .globl console_putc + .globl console_getc + .globl console_flush + + /* + * The console base is in the data section and not in .bss + * even though it is zero-init. In particular, this allows + * the console functions to start using this variable before + * the runtime memory is initialized for images which do not + * need to copy the .data section from ROM to RAM. + */ +.section .data.console_base ; .align 3 + console_base: .quad 0x0 + + /* ----------------------------------------------- + * int console_init(uintptr_t base_addr, + * unsigned int uart_clk, unsigned int baud_rate) + * Function to initialize the console without a + * C Runtime to print debug information. It saves + * the console base to the data section. + * In: x0 - console base address + * w1 - Uart clock in Hz + * w2 - Baud rate + * out: return 1 on success else 0 on error + * Clobber list : x1 - x4 + * ----------------------------------------------- + */ +func console_init + /* Check the input base address */ + cbz x0, init_fail + adrp x3, console_base + str x0, [x3, :lo12:console_base] + b console_core_init +init_fail: + ret +endfunc console_init + + /* ----------------------------------------------- + * void console_uninit(void) + * Function to finish the use of console driver. + * It sets the console_base as NULL so that any + * further invocation of `console_putc` or + * `console_getc` APIs would return error. + * ----------------------------------------------- + */ +func console_uninit + mov x0, #0 + adrp x3, console_base + str x0, [x3, :lo12:console_base] + ret +endfunc console_uninit + + /* --------------------------------------------- + * int console_putc(int c) + * Function to output a character over the + * console. It returns the character printed on + * success or -1 on error. + * In : x0 - character to be printed + * Out : return -1 on error else return character. + * Clobber list : x1, x2 + * --------------------------------------------- + */ +func console_putc + adrp x2, console_base + ldr x1, [x2, :lo12:console_base] + b console_core_putc +endfunc console_putc + + /* --------------------------------------------- + * int console_getc(void) + * Function to get a character from the console. + * It returns the character grabbed on success + * or -1 on error. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_getc + adrp x1, console_base + ldr x0, [x1, :lo12:console_base] + b console_core_getc +endfunc console_getc + + /* --------------------------------------------- + * int console_flush(void) + * Function to force a write of all buffered + * data that hasn't been output. It returns 0 + * upon successful completion, otherwise it + * returns -1. + * Clobber list : x0, x1 + * --------------------------------------------- + */ +func console_flush + adrp x1, console_base + ldr x0, [x1, :lo12:console_base] + b console_core_flush +endfunc console_flush diff --git a/drivers/console/aarch64/multi_console.S b/drivers/console/aarch64/multi_console.S new file mode 100644 index 00000000..15c3ba43 --- /dev/null +++ b/drivers/console/aarch64/multi_console.S @@ -0,0 +1,260 @@ +/* + * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <asm_macros.S> +#include <assert_macros.S> +#include <console.h> + + .globl console_register + .globl console_unregister + .globl console_set_scope + .globl console_switch_state + .globl console_putc + .globl console_getc + .globl console_flush + + /* + * The console list pointer is in the data section and not in + * .bss even though it is zero-init. In particular, this allows + * the console functions to start using this variable before + * the runtime memory is initialized for images which do not + * need to copy the .data section from ROM to RAM. + */ +.section .data.console_list ; .align 3 + console_list: .quad 0x0 +.section .data.console_state ; .align 0 + console_state: .byte CONSOLE_FLAG_BOOT + + /* ----------------------------------------------- + * int console_register(console_t *console) + * Function to insert a new console structure into + * the console list. Should usually be called by + * console_<driver>_register implementations. The + * data structure passed will be taken over by the + * console framework and *MUST* be allocated in + * persistent memory (e.g. the data section). + * In : x0 - address of console_t structure + * Out: x0 - Always 1 (for easier tail calling) + * Clobber list: x0, x1, x14 + * ----------------------------------------------- + */ +func console_register +#if ENABLE_ASSERTIONS + cmp x0, #0 + ASM_ASSERT(ne) + adrp x1, __STACKS_START__ + add x1, x1, :lo12:__STACKS_START__ + cmp x0, x1 + b.lo not_on_stack + adrp x1, __STACKS_END__ + add x1, x1, :lo12:__STACKS_END__ + cmp x0, x1 + ASM_ASSERT(hs) +not_on_stack: +#endif /* ENABLE_ASSERTIONS */ + adrp x14, console_list + ldr x1, [x14, :lo12:console_list] /* X1 = first struct in list */ + str x0, [x14, :lo12:console_list] /* list head = new console */ + str x1, [x0, #CONSOLE_T_NEXT] /* new console next ptr = X1 */ + mov x0, #1 + ret +endfunc console_register + + /* ----------------------------------------------- + * int console_unregister(console_t *console) + * Function to find a specific console in the list + * of currently active consoles and remove it. + * In: x0 - address of console_t struct to remove + * Out: x0 - removed address, or NULL if not found + * Clobber list: x0, x1, x14 + * ----------------------------------------------- + */ +func console_unregister + adrp x14, console_list + add x14, x14, :lo12:console_list /* X14 = ptr to first struct */ + ldr x1, [x14] /* X1 = first struct */ + +unregister_loop: + cbz x1, unregister_not_found + cmp x0, x1 + b.eq unregister_found + ldr x14, [x14] /* X14 = next ptr of struct */ + ldr x1, [x14] /* X1 = next struct */ + b unregister_loop + +unregister_found: + ldr x1, [x1] /* X1 = next struct */ + str x1, [x14] /* prev->next = cur->next */ + ret + +unregister_not_found: + mov x0, #0 /* return NULL if not found */ + ret +endfunc console_unregister + + /* ----------------------------------------------- + * void console_switch_state(unsigned int new_state) + * Function to switch the current console state. + * The console state determines which of the + * registered consoles are actually used at a time. + * In : w0 - global console state to move to + * Clobber list: x0, x1 + * ----------------------------------------------- + */ +func console_switch_state + adrp x1, console_state + strb w0, [x1, :lo12:console_state] + ret +endfunc console_switch_state + + /* ----------------------------------------------- + * void console_set_scope(console_t *console, + * unsigned int scope) + * Function to update the states that a given console + * may be active in. + * In : x0 - pointer to console_t struct + * : w1 - new active state mask + * Clobber list: x0, x1, x2 + * ----------------------------------------------- + */ +func console_set_scope +#if ENABLE_ASSERTIONS + tst w1, #~CONSOLE_FLAG_SCOPE_MASK + ASM_ASSERT(eq) +#endif /* ENABLE_ASSERTIONS */ + ldr w2, [x0, #CONSOLE_T_FLAGS] + and w2, w2, #~CONSOLE_FLAG_SCOPE_MASK + orr w2, w2, w1 + str w2, [x0, #CONSOLE_T_FLAGS] + ret +endfunc console_set_scope + + /* --------------------------------------------- + * int console_putc(int c) + * Function to output a character. Calls all + * active console's putc() handlers in succession. + * In : x0 - character to be printed + * Out: x0 - printed character on success, or < 0 + if at least one console had an error + * Clobber list : x0, x1, x2, x12, x13, x14, x15 + * --------------------------------------------- + */ +func console_putc + mov x15, x30 + mov w13, #ERROR_NO_VALID_CONSOLE /* W13 = current return value */ + mov w12, w0 /* W12 = character to print */ + adrp x14, console_list + ldr x14, [x14, :lo12:console_list] /* X14 = first console struct */ + +putc_loop: + cbz x14, putc_done + adrp x1, console_state + ldrb w1, [x1, :lo12:console_state] + ldr x2, [x14, #CONSOLE_T_FLAGS] + tst w1, w2 + b.eq putc_continue + ldr x2, [x14, #CONSOLE_T_PUTC] + cbz x2, putc_continue + mov w0, w12 + mov x1, x14 + blr x2 + cmp w13, #ERROR_NO_VALID_CONSOLE /* update W13 if it's NOVALID */ + ccmp w0, #0, #0x8, ne /* else update it if W0 < 0 */ + csel w13, w0, w13, lt +putc_continue: + ldr x14, [x14] /* X14 = next struct */ + b putc_loop + +putc_done: + mov w0, w13 + ret x15 +endfunc console_putc + + /* --------------------------------------------- + * int console_getc(void) + * Function to get a character from any console. + * Keeps looping through all consoles' getc() + * handlers until one of them returns a + * character, then stops iterating and returns + * that character to the caller. Will stop looping + * if all active consoles report real errors + * (other than just not having a char available). + * Out : x0 - read character, or < 0 on error + * Clobber list : x0, x1, x13, x14, x15 + * --------------------------------------------- + */ +func console_getc + mov x15, x30 +getc_try_again: + mov w13, #ERROR_NO_VALID_CONSOLE /* W13 = current return value */ + adrp x14, console_list + ldr x14, [x14, :lo12:console_list] /* X14 = first console struct */ + cbnz x14, getc_loop + mov w0, w13 /* If no consoles registered */ + ret x15 /* return immediately. */ + +getc_loop: + adrp x0, console_state + ldrb w0, [x0, :lo12:console_state] + ldr x1, [x14, #CONSOLE_T_FLAGS] + tst w0, w1 + b.eq getc_continue + ldr x1, [x14, #CONSOLE_T_GETC] + cbz x1, getc_continue + mov x0, x14 + blr x1 + cmp w0, #0 /* if X0 >= 0: return */ + b.ge getc_found + cmp w13, #ERROR_NO_PENDING_CHAR /* may update W13 (NOCHAR has */ + csel w13, w13, w0, eq /* precedence vs real errors) */ +getc_continue: + ldr x14, [x14] /* X14 = next struct */ + cbnz x14, getc_loop + cmp w13, #ERROR_NO_PENDING_CHAR /* Keep scanning if at least */ + b.eq getc_try_again /* one console returns NOCHAR */ + mov w0, w13 + +getc_found: + ret x15 +endfunc console_getc + + /* --------------------------------------------- + * int console_flush(void) + * Function to force a write of all buffered + * data that hasn't been output. Calls all + * console's flush() handlers in succession. + * Out: x0 - 0 on success, < 0 if at least one error + * Clobber list : x0, x1, x2, x3, x4, x5, x13, x14, x15 + * --------------------------------------------- + */ +func console_flush + mov x15, x30 + mov w13, #ERROR_NO_VALID_CONSOLE /* W13 = current return value */ + adrp x14, console_list + ldr x14, [x14, :lo12:console_list] /* X14 = first console struct */ + +flush_loop: + cbz x14, flush_done + adrp x1, console_state + ldrb w1, [x1, :lo12:console_state] + ldr x2, [x14, #CONSOLE_T_FLAGS] + tst w1, w2 + b.eq flush_continue + ldr x1, [x14, #CONSOLE_T_FLUSH] + cbz x1, flush_continue + mov x0, x14 + blr x1 + cmp w13, #ERROR_NO_VALID_CONSOLE /* update W13 if it's NOVALID */ + ccmp w0, #0, #0x8, ne /* else update it if W0 < 0 */ + csel w13, w0, w13, lt +flush_continue: + ldr x14, [x14] /* X14 = next struct */ + b flush_loop + +flush_done: + mov w0, w13 + ret x15 +endfunc console_flush diff --git a/drivers/console/aarch64/skeleton_console.S b/drivers/console/aarch64/skeleton_console.S index 9db6157d..1b5d7393 100644 --- a/drivers/console/aarch64/skeleton_console.S +++ b/drivers/console/aarch64/skeleton_console.S @@ -4,99 +4,171 @@ * SPDX-License-Identifier: BSD-3-Clause */ #include <asm_macros.S> +#include <console_macros.S> /* - * This file contains a skeleton console implementation that can - * be used as basis for a real console implementation by platforms - * that do not contain PL011 hardware. + * This file contains a skeleton console driver that can be used as + * basis for a real console driver. Console drivers in Trusted Firmware + * can be instantiated multiple times. Each instance is described by a + * separate console_t structure which must be registered with the common + * console framework via console_register(). Console drivers should + * define a console_xxx_register() function that initializes a new + * console_t structure passed in from the caller and registers it after + * initializing the console hardware. Drivers may define their own + * structures extending console_t to store private driver information. + * Console drivers *MUST* take care that the console callbacks they + * implement only change registers allowed in the clobber lists defined + * in this file. (Note that in addition to the explicit clobber lists, + * any function may always clobber the intra-procedure-call registers + * X16 and X17, but may never depend on them retaining their values + * across any function call.) + * Platforms using drivers based on this template need to enable + * MULTI_CONSOLE_API := 1 in their platform.mk. */ - .globl console_core_init - .globl console_core_putc - .globl console_core_getc - .globl console_core_flush + .globl console_xxx_register + .globl console_xxx_putc + .globl console_xxx_getc + .globl console_xxx_flush /* ----------------------------------------------- - * int console_core_init(uintptr_t base_addr, - * unsigned int uart_clk, unsigned int baud_rate) - * Function to initialize the console without a - * C Runtime to print debug information. This - * function will be accessed by console_init and - * crash reporting. - * In: x0 - console base address - * w1 - Uart clock in Hz - * w2 - Baud rate - * Out: return 1 on success else 0 on error - * Clobber list : x1, x2 + * int console_xxx_register(console_xxx_t *console, + * ...additional parameters as desired...) + * Function to initialize and register the console. + * The caller needs to pass an empty console_xxx_t + * structure in which *MUST* be allocated in + * persistent memory (e.g. a global or static local + * variable, *NOT* on the stack). + * In : x0 - pointer to empty console_t structure + * x1 through x7: additional parameters as desired + * Out: x0 - 1 on success, 0 on error + * Clobber list : x0 - x7 * ----------------------------------------------- */ -func console_core_init - /* Check the input base address */ - cbz x0, core_init_fail - /* Check baud rate and uart clock for sanity */ - cbz w1, core_init_fail - cbz w2, core_init_fail - /* Insert implementation here */ - mov w0, #1 - ret -core_init_fail: - mov w0, wzr +func console_xxx_register + /* + * Store parameters (e.g. hardware base address) in driver-specific + * console_xxx_t structure field if they will need to be retrieved + * by later console callback (e.g. putc). + * Example: + */ + str x1, [x0, #CONSOLE_T_XXX_BASE] + str x2, [x0, #CONSOLE_T_XXX_SOME_OTHER_VALUE] + + /* + * Initialize console hardware, using x1 - x7 parameters as needed. + * Keep console_t pointer in x0 for later. + */ + + /* Macro to finish up registration and return (needs valid x0 + x30). */ + finish_console_register xxx + + /* Jump here if hardware init fails or parameters are invalid. */ +register_fail: + mov w0, #0 ret -endfunc console_core_init +endfunc console_xxx_register /* -------------------------------------------------------- - * int console_core_putc(int c, uintptr_t base_addr) + * int console_xxx_putc(int c, console_xxx_t *console) * Function to output a character over the console. It * returns the character printed on success or -1 on error. * In : w0 - character to be printed - * x1 - console base address - * Out : return -1 on error else return character. - * Clobber list : x2 + * x1 - pointer to console_t struct + * Out: w0 - printed character on success, < 0 on error. + * Clobber list : x0, x1, x2 * -------------------------------------------------------- */ -func console_core_putc - /* Check the input parameter */ - cbz x1, putc_error - /* Insert implementation here */ +func console_xxx_putc + /* + * Retrieve values we need (e.g. hardware base address) from + * console_xxx_t structure pointed to by x1. + * Example: + */ + ldr x1, [x1, #CONSOLE_T_XXX_BASE] + + /* + * Write w0 to hardware. + */ + ret + + /* Jump here if output fails for any reason. */ putc_error: mov w0, #-1 ret -endfunc console_core_putc +endfunc console_xxx_putc /* --------------------------------------------- - * int console_core_getc(uintptr_t base_addr) + * int console_xxx_getc(console_xxx_t *console) * Function to get a character from the console. - * It returns the character grabbed on success - * or -1 on error. - * In : x0 - console base address + * Even though console_getc() is blocking, this + * callback has to be non-blocking and always + * return immediately to allow polling multiple + * drivers concurrently. + * Returns the character grabbed on success, + * ERROR_NO_PENDING_CHAR if no character was + * available at this time, or any value + * between -2 and -127 if there was an error. + * In : x0 - pointer to console_t struct + * Out: w0 - character on success, + * ERROR_NO_PENDING_CHAR if no char, + * < -1 on error * Clobber list : x0, x1 * --------------------------------------------- */ -func console_core_getc - cbz x0, getc_error - /* Insert implementation here */ +func console_xxx_getc + /* + * Retrieve values we need (e.g. hardware base address) from + * console_xxx_t structure pointed to by x0. + * Example: + */ + ldr x1, [x0, #CONSOLE_T_XXX_BASE] + + /* + * Try to read character into w0 from hardware. + */ + ret + + /* Jump here if there is no character available at this time. */ +getc_no_char: + mov w0, #ERROR_NO_PENDING_CHAR + ret + + /* Jump here if there was any hardware error. */ getc_error: - mov w0, #-1 + mov w0, #-2 /* may pick error codes between -2 and -127 */ ret -endfunc console_core_getc +endfunc console_xxx_getc /* --------------------------------------------- - * int console_core_flush(uintptr_t base_addr) + * int console_xxx_flush(console_xxx_t *console) * Function to force a write of all buffered * data that hasn't been output. - * In : x0 - console base address - * Out : return -1 on error else return 0. - * Clobber list : x0, x1 + * In : x0 - pointer to console_xxx_t struct + * Out: w0 - 0 on success, < 0 on error + * Clobber list : x0, x1, x2, x3, x4, x5 * --------------------------------------------- */ -func console_core_flush - cbz x0, flush_error - /* Insert implementation here */ +func console_xxx_flush + /* + * Retrieve values we need (e.g. hardware base address) from + * console_xxx_t structure pointed to by x0. + * Example: + */ + ldr x1, [x0, #CONSOLE_T_XXX_BASE] + + /* + * Flush all remaining output from hardware FIFOs. Do not return until + * all data has been flushed or there was an unrecoverable error. + */ + mov w0, #0 ret + + /* Jump here if an unrecoverable error has been encountered. */ flush_error: mov w0, #-1 ret -endfunc console_core_flush +endfunc console_xxx_flush |