2004-04-22 Jani Monoses * cdl/hal_mips_malta.cdl : Invoke tail with stricter syntax that works in latest coreutils. 2004-01-14 Nick Garnett * src/plf_misc.c (hal_platform_init): Changed capitalization of "eCos" displayed on ASCII display. (cyg_hal_plf_pci_init): Added call to cyg_pci_init() before call to cyg_pci_configure_bus(). * include/plf_io.h (HAL_PCI_TRANSLATE_INTERRUPT): Added special case for on-board Ethernet device. It doesn't seem it obey the rules. * include/plf_intr.h (HAL_INTERRUPT_ACKNOWLEDGE): Added acknowledgement for interrupts in interrupt controller. 2003-09-21 Gary Thomas * misc/redboot_RAM.ecm: * misc/redboot_RAM_5kc.ecm: * misc/redboot_ROM.ecm: * misc/redboot_ROM_5kc.ecm: Adjust for changes in RedBoot template - DNS now must be enabled manually. 2003-09-20 Gary Thomas * src/plf_misc.c: IDE init needs to return number of controllers found. 2003-07-18 Nick Garnett * cdl/hal_mips_malta.cdl: Changed values for CYGNUM_HAL_RTC_NUMERATOR, CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to "default_value" from "calculated". This makes it easier to change these values globally. 2002-08-06 Gary Thomas 2002-08-06 Motoya Kurotsu * src/ser16c550c.c: I/O channel data can't be constant - contains timeout information which can be changed. 2002-02-11 Jesper Skov * include/platform.inc: Added hal_intc_translate that knows about the special trampoline code. * include/plf_intr.h: Updated comment. 2002-02-05 Jesper Skov * include/plf_intr.h: Always define the vectors, regardless of chaining configuration. 2002-01-31 Jesper Skov * src/platform.S (hal_isr_springboard_southbridge): Apply mask to interrupt flags - I've seen requests set for masked interrupts. Also don't check the slave controller unless the cascade request is set. 2001-12-06 Nick Garnett * images/redboot_RAM_5kc.elf * images/redboot_RAM_5kc.srec * images/redboot_ROM_5kc.elf * images/redboot_ROM_5kc.fl * images/redboot_ROM_5kc.srec Added these images for 5kc target. * images/redboot_RAM.elf * images/redboot_RAM.srec * images/redboot_ROM.elf * images/redboot_ROM.fl * images/redboot_ROM.srec Updated these images to match the 5kc ones. These images are for Malta boards with the 4kc processor. These will actually run in a 5kc, but will treat it as a 32bit CPU, and will not provide 64bit state to GDB. 2001-12-04 Nick Garnett * misc/redboot_ROM.ecm: Commented out CYGSEM_REDBOOT_DISK_ISO9660 since its presence causes CDL and compilation errors. 2001-11-06 Mark Salter * misc/redboot_ROM.ecm: Cleanup to support both mips32 and mips64. * misc/redboot_RAM.ecm: Ditto. 2001-10-31 Jonathan Larmour * cdl/hal_mips_malta.cdl: Indicate support of variable baud rates. 2001-07-24 Mark Salter * src/plf_misc.c (cyg_hal_plf_ide_init): New function to enable IDE controllers. (cyg_hal_plf_pci_init): Move ISA bridge setup from cyg_hal_plf_pci_init * include/plf_io.h: Add IDE i/f macros. * cdl/hal_mips_malta.cdl: Now implements CYGINT_HAL_PLF_IF_IDE. 2001-07-17 David Woodhouse * src/redboot_cmds.c: Remove. Superseded by generic MIPS exec. * cdl/hal_mips_malta.cdl: Remove reference to $1 2001-07-13 Jesper Skov * include/plf_io.h (HAL_PCI_ALLOC_BASE_IO): Reserve 64kB for southbridge instead of 8kB. 2001-07-12 Jesper Skov * include/plf_io.h: Fix errors. 2001-07-05 Jesper Skov * include/plf_io.h: Added PCI/CPU address translation macros. 2001-06-27 Mark Salter * misc/redboot_RAM.ecm (CYGSEM_REDBOOT_BSP_SYSCALLS): Enable GNUPro syscalls. * misc/redboot_ROM.ecm (CYGSEM_REDBOOT_BSP_SYSCALLS): Ditto. 2001-06-06 Jesper Skov * include/plf_io.h (HAL_PCI_TRANSLATE_INTERRUPT): Defined. * include/plf_intr.h: Made safe to include from assembly files. * src/plf_mk_defs.c (main): Deleted interrupt vector definitions. * src/ser16c550c.c: Fix warning. * src/platform.S: Add .noreorder statements. 2001-06-05 Jesper Skov * src/platform.S (hal_isr_springboard_southbridge): Use delay slots, return 0 for spurious interrupts. 2001-06-01 Jesper Skov * src/plf_mk_defs.c: Added CYGNUM_HAL_INTERRUPT_CASCADE. * src/plf_misc.c (hal_init_irq): Fix enabling of cascading interrupts from secondary controller. * src/platform.S (hal_isr_springboard_southbridge): Fixed decoding of secondary sources. Bail out on spurious interrups. 2001-04-26 Mark Salter * include/plf_io.h (HAL_PCI_ALLOC_BASE_MEMORY): Fix typo. * cdl/hal_mips_malta.cdl (CYGNUM_HAL_RTC_PERIOD): Fix calculation to be based on one half of the CPU clock frequency. 2001-04-23 Mark Salter * include/plf_io.h: Adjust PCI memory and io base constants so that CPU/PCI addresses match the GT64120 setup. Change PCI memory alloc base to allow for memory used by south bridge. 2001-04-11 Jesper Skov * src/plf_mk_defs.c: Added a few more defs. * src/platform.S: Added southbridge springboard for interrupt decoding. * include/plf_io.h: Carve out a bit of memory at 0 in the PCI IO space. Otherwise PCI devices get assigned space which the lana southbridge is hardwired to. Also moved PCI register defs to this file. * src/plf_misc.c: Added PCI interrupt routing setup. 2001-04-10 Jesper Skov * src/ser16c550c.c (cyg_hal_plf_serial_init_channel): Allow interrupts. * include/plf_io.h (HAL_PIIX4_ELCR2): Fix typo. * src/plf_misc.c (hal_init_irq): Added. (hal_init_irq): Use byte access to SERIRQ. * include/plf_io.h: Replaced interrupt definitions. * include/plf_intr.h: Proper interrupt handling. * include/platform.inc: Removed hal_intc_decode. * misc/redboot_RAM.ecm: Added decompression support. * misc/redboot_ROM.ecm: Same. * include/pkgconf/mlt_mips_malta_ram.mlt: Give RedBoot even more space. * include/pkgconf/mlt_mips_malta_ram.ldi: Same. * include/pkgconf/mlt_mips_malta_ram.h: Same. 2001-04-09 Jesper Skov * include/pkgconf/mlt_mips_malta_ram.h: Changed base address. * include/pkgconf/mlt_mips_malta_ram.mlt: Same. * include/pkgconf/mlt_mips_malta_ram.ldi: Same. * misc/redboot_ROM.ecm: Updated. * include/pkgconf/mlt_mips_malta_rom.h: Updated. * include/pkgconf/mlt_mips_malta_rom.ldi: Same. * include/pkgconf/mlt_mips_malta_rom.mlt: Same. * include/pkgconf/mlt_mips_malta_ram.h: Updated. * include/pkgconf/mlt_mips_malta_ram.ldi: Same. * include/pkgconf/mlt_mips_malta_ram.mlt: Same. * src/plf_mk_defs.c: Added. * cdl/hal_mips_malta.cdl: Build mk_defs file. * src/platform.S: Get table size def from header. 2001-04-03 Jesper Skov * misc/redboot_RAM.ecm: Added net packages. * include/pkgconf/mlt_mips_malta_ram.h: Hacked in some PCI memory. * include/pkgconf/mlt_mips_malta_ram.ldi: Same. 2001-04-02 Jesper Skov * src/ser16c550c.c: Removed debug channel definitions, added second port. * include/plf_intr.h: Removed UART vector. * src/plf_misc.c: Moved SMSC superIO init code... * src/smsc37m81x.c (cyg_hal_init_superIO): to here. * cdl/hal_mips_malta.cdl: Compile new file. 2001-03-23 Jesper Skov * src/plf_misc.c (hal_platform_init): Initialize PIIX4 and set up COM1 for the SMSC SuperIO part. Now we have serial output. Wohoo! * include/plf_io.h: Added a few new definitions. * src/platform.S: Enable Galileo as PCI master. Make all PCI IO be offset from zero to make PIIX4 happy. * include/plf_intr.h (CYGNUM_HAL_INTERRUPT_EXTERNAL_BASE): Added. * misc/redboot_ROM.ecm: Updated. * src/platform.S: Use correct ISR count (hack). * include/platform.inc: Remove RAM SDRAM init hack. * src/platform.S: SDP: Fix sizing logic. * include/plf_io.h (HAL_SPD_GET_SDRAM_WIDTH): Changed to width of DIMM instead of width of individual SDRAM devices. 2001-03-22 Jesper Skov * src/platform.S: Remove some of the hacks. * include/plf_io.h (HAL_I2C_READ, HAL_I2C_WRITE): Get these right, and the code works. Sheesh! * src/platform.S: Minor tweaks to make I2C code match that in YAMON. Still doesn't work though. * include/platform.inc: Hacked to enable SDRAM init. * src/platform.S: Rewrote to use simpler macros. * src/plf_misc.c: Removed some CYGMON stuff. * include/plf_io.h: Added simpler definitions for I2C access. * src/plf_misc.c (hal_platform_init): Fix warning. * src/platform.S: Rewrote I2C code for FPGA controller. * include/pkgconf/mlt_mips_malta_rom.h: Updated. * include/pkgconf/mlt_mips_malta_rom.mlt: Same. * include/pkgconf/mlt_mips_malta_rom.ldi: Same. * include/plf_io.h: Added I2C definitions for FPGA I2C controller. * cdl/hal_mips_malta.cdl: Added clock option. 2001-03-21 Jesper Skov * misc/redboot_RAM.ecm: Updated. * src/plf_misc.c: Always init PCI. Wait for reset. 2001-03-20 Jesper Skov * src/ser16c550c.c: Work with either the debug UART (untested) or the SuperIO controllers. Clean up baud rate stuff. * src/plf_misc.c (cyg_hal_plf_pci_init): Disable init code for now. * include/platform.inc: Removed ROMRAM startup stuff. * cdl/hal_mips_malta.cdl: Changed some default settings. * src/plf_misc.c: Removed test code and CYGMON init code. * misc/redboot_RAM.ecm: Updated with new options. * src/ser16c550c.c: Changes to use SuperIO in PCI space. * cdl/hal_mips_malta.cdl: Replace old baud rate options with CYGNUM_HAL_VIRTUAL_VECTOR_CHANNELS_DEFAULT_BAUD. * src/redboot_cmds.c (do_exec): Use CYGNUM_HAL_VIRTUAL_VECTOR_CHANNELS_DEFAULT_BAUD. * Package cloned from Atlas package. //=========================================================================== // ####GPLCOPYRIGHTBEGIN#### // ------------------------------------------- // This file is part of eCos, the Embedded Configurable Operating System. // Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. // // This program is free software; you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation; either version 2 or (at your option) any // later version. // // This program is distributed in the hope that it will be useful, but // WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program; if not, write to the // Free Software Foundation, Inc., 51 Franklin Street, // Fifth Floor, Boston, MA 02110-1301, USA. // ------------------------------------------- // ####GPLCOPYRIGHTEND#### //===========================================================================