1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/dts-v1/;
/memreserve/ 0x1c000000 0x04000000;
/include/ "../../nvidia/cardhu/tegra30.dtsi"
/ {
model = "Toradex Colibri T30";
compatible = "toradex,t30", "nvidia,tegra30";
config {
silent_console = <0>;
odmdata = <0x300d8011>;
hwid = "ARM CARDHU TEST 6666";
machine-arch-id = <3436>;
};
aliases {
console = "/serial@70006000";
usb0 = "/usb@0x7d004000";
usb1 = "/usb@0x7d008000";
usb2 = "/usb@0x7d000000";
sdmmc0 = "/sdhci@78000600";
sdmmc1 = "/sdhci@78000200";
i2c0 = "/i2c@0x7000d000";
i2c1 = "/i2c@0x7000c000";
i2c2 = "/i2c@0x7000c400";
i2c3 = "/i2c@0x7000c500";
i2c4 = "/i2c@0x7000c700";
};
chosen {
bootargs = "";
};
memory {
device_type = "memory";
reg = <0x80000000 0xc0000000>;
};
serial@70006000 {
status = "ok";
/*
* TBD - use CONFIG_SYS_PLLP_BASE_IS_408MHZ somehow here.
* Currently I put this back to 216MHz in fdt_decode.c
*/
clock-frequency = <408000000>;
};
sdhci@78000200 {
status = "ok";
width = <4>; /* width of SDIO port */
removable = <1>;
/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
cd-gpio = <&gpio 166 0>; /* card detect, gpio PU6 */
};
/* Internal eMMC - SDMMC4 */
emmc: sdhci@78000600 {
status = "ok";
width = <4>; /* width of SDIO port */
removable = <0>;
};
lcd {
compatible = "nvidia,tegra2-lcd";
width = <640>;
height = <480>;
bits_per_pixel = <16>;
pwfm = <&pwfm0>;
display = <&display1>;
/* frame-buffer location = top of memory - carveout - fb */
frame-buffer = <0xbfb00000>;
pixel_clock = <25175000>;
/* Timing: ref_to_sync, sync_width. back_porch, front_porch */
horiz_timing = <0 96 48 16>;
vert_timing = <1 2 31 11>;
/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
backlight-vdd = <&gpio 255 3>; /* PH0, LCD1_BL_PWM */
backlight-enable = <&gpio 255 3>; /* PH2, LCD1_BL_EN */
lvds-shutdown = <&gpio 255 3>; /* PL2, LVDS1_SHTDN */
panel-vdd = <&gpio 255 3>; /* PL4, EN_VDD_PNL1 */
/*
* Panel required timings
* Timing 1: delay between panel_vdd-rise and data-rise
* Timing 2: delay between data-rise and backlight_vdd-rise
* Timing 3: delay between backlight_vdd and pwm-rise
* Timing 4: delay between pwm-rise and backlight_en-rise
*/
panel-timings = <0 0 0 0>;
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@0x7d000000 {
status = "ok";
host-mode = <1>;
};
usbphya: usbphy@0 {
compatible = "smsc,usb3315";
status = "ok";
};
/* EHCI instance 1: USB2_DP/N -> ASIX ETH */
usb@0x7d004000 {
status = "ok";
utmi = <&usbphya>;
host-mode = <0>;
vbus-gpio = <&gpio 234 3>; /* PDD2, LAN_V_BUS */
vbus_pullup-gpio = <&gpio 232 3>; /* PDD0, LAN_RESET_N */
};
usbphyb: usbphy@0 {
compatible = "smsc,usb3315";
status = "ok";
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@0x7d008000 {
status = "ok";
utmi = <&usbphyb>;
host-mode = <0>;
vbus-gpio = <&gpio 178 1>; /* PW2, USBH_PEN */
};
};
|
