/dts-v1/;

/memreserve/ 0x1c000000 0x04000000;
/include/ "../../nvidia/cardhu/tegra30.dtsi"

/ {
	model = "Toradex Colibri T30";
	compatible = "toradex,colibri_t30", "nvidia,tegra30";

	config {
		machine-arch-id = <4493>;
	};

	aliases {
		console = "/serial@70006000";
		usb0 = "/usb@0x7d004000";
		usb1 = "/usb@0x7d008000";
		usb2 = "/usb@0x7d000000";

		sdmmc0 = "/sdhci@78000600";
		sdmmc1 = "/sdhci@78000200";

		i2c0 = "/i2c@0x7000d000";
		i2c1 = "/i2c@0x7000c000";
		i2c2 = "/i2c@0x7000c400";
		i2c3 = "/i2c@0x7000c500";
		i2c4 = "/i2c@0x7000c700";
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0xc0000000>;
	};

	serial@70006000 {
		status = "ok";
		/*
		 * TBD - use CONFIG_SYS_PLLP_BASE_IS_408MHZ somehow here.
		 * Currently I put this back to 216MHz in fdt_decode.c
		 */
		clock-frequency = <408000000>;
	};

	sdhci@78000200 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <1>;
		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		cd-gpio = <&gpio 23 0>; /* card detect, gpio PC7 */
	};

	/* Internal eMMC - SDMMC4 */
	emmc: sdhci@78000600 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <0>;
	};

	lcd {
		compatible = "nvidia,tegra2-lcd";
		width = <640>;
		height = <480>;
		bits_per_pixel = <16>;
		pwfm = <&pwfm0>;
		display = <&display1>;
                /* frame-buffer location = top of memory - carveout - fb */
		frame-buffer = <0xbfb00000>;

		pixel_clock = <25175000>;

		/* Timing: ref_to_sync, sync_width, back_porch, front_porch */
		horiz_timing = <0 96 48 16>;
		vert_timing = <1 2 31 11>;

		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		backlight-vdd = <&gpio 255 3>;		/* PH0, LCD1_BL_PWM */
		backlight-enable = <&gpio 255 3>;	/* PH2, LCD1_BL_EN */
		lvds-shutdown = <&gpio 255 3>;		/* PL2, LVDS1_SHTDN */
		panel-vdd = <&gpio 255 3>;		/* PL4, EN_VDD_PNL1 */

		/*
		 * Panel required timings
		 * Timing 1: delay between panel_vdd-rise and data-rise
		 * Timing 2: delay between data-rise and backlight_vdd-rise
		 * Timing 3: delay between backlight_vdd and pwm-rise
		 * Timing 4: delay between pwm-rise and backlight_en-rise
		 */
		panel-timings = <0 0 0 0>;
	};

	/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
	usb@0x7d000000 {
		status = "ok";
		host-mode = <1>;
	};

	usbphya: usbphy@0 {
		compatible = "smsc,usb3315";
		status = "ok";
	};

	/* EHCI instance 1: USB2_DP/N -> ASIX ETH */
	usb@0x7d004000 {
		status = "ok";
		utmi = <&usbphya>;
		host-mode = <0>;
	};

	usbphyb: usbphy@0 {
		compatible = "smsc,usb3315";
		status = "ok";
	};

	/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
	usb@0x7d008000 {
		status = "ok";
		utmi = <&usbphyb>;
		host-mode = <0>;
		vbus-gpio = <&gpio 178 1>;	/* PW2, USBH_PEN */
	};
};