/dts-v1/;

/memreserve/ 0x1c000000 0x04000000;
/include/ "../../nvidia/cardhu/tegra30.dtsi"

/ {
	model = "Toradex Apalis T30";
	compatible = "toradex,apalis_t30", "nvidia,tegra30";

	config {
		machine-arch-id = <4513>;
	};

	aliases {
		console = "/serial@70006000";
		usb0 = "/usb@0x7d000000";
		usb1 = "/usb@0x7d004000";
		usb2 = "/usb@0x7d008000";

		sdmmc0 = "/sdhci@78000600";
		sdmmc1 = "/sdhci@78000400";
		sdmmc2 = "/sdhci@78000000";

		i2c0 = "/i2c@0x7000d000";
		i2c1 = "/i2c@0x7000c000";
		i2c2 = "/i2c@0x7000c400";
		i2c3 = "/i2c@0x7000c500";
		i2c4 = "/i2c@0x7000c700";
	};

	memory {
		device_type = "memory";
		reg = <0x80000000 0x80000000>;
	};

	serial@70006000 {
		status = "ok";
		/*
		 * TBD - use CONFIG_SYS_PLLP_BASE_IS_408MHZ somehow here.
		 * Currently I put this back to 216MHz in fdt_decode.c
		 */
		clock-frequency = <408000000>;
	};

	/* SD - SDMMC1 */
	sdhci@78000000 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <1>;
		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		cd-gpio = <&gpio 229 0>; /* card detect, gpio PCC5, SD1_CD_N */
	};

	/* MMC - SDMMC3 */
//8-bit support broken
	sdhci@78000400 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <1>;
		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		cd-gpio = <&gpio 171 0>; /* card detect, gpio PV3, MMC1_CD_N */
	};

	/* Internal eMMC - SDMMC4 */
//8-bit support broken
	emmc: sdhci@78000600 {
		status = "ok";
		width = <4>;	/* width of SDIO port */
		removable = <0>;
	};

	lcd {
		compatible = "nvidia,tegra2-lcd";
		width = <640>;
		height = <480>;
		bits_per_pixel = <16>;
		pwfm = <&pwfm0>;
		display = <&display1>;
                /* frame-buffer location = top of memory - carveout - fb */
		frame-buffer = <0xbfb00000>;

		pixel_clock = <25175000>;

		/* Timing: ref_to_sync, sync_width, back_porch, front_porch */
		horiz_timing = <0 96 48 16>;
		vert_timing = <1 2 31 11>;

		/* 800x480@60 (e.g. EDT ET070080DH6)
		pixel_clock = <32460000>;
		width = <800>;
		height = <480>;
		horiz_timing = <1 64 128 64>;
		vert_timing = <1 3 22 20>;
		*/

		/* 1024x768 timings
		pixel_clock = <72000000>;
		width = <1024>;
		height = <768>;
		horiz_timing = <0 136 160 24>;
		vert_timing = <1 6 29 3>;
		*/

		/* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */
		backlight-enable = <&gpio 170 1>; /* PV2 - SODIMM 71: BL_ON */
		backlight-vdd = <&gpio 255 1>;
		lvds-shutdown = <&gpio 255 1>;
		panel-vdd = <&gpio 255 1>;

		/*
		 * Panel required timings
		 * Timing 1: delay between panel_vdd-rise and data-rise
		 * Timing 2: delay between data-rise and backlight_vdd-rise
		 * Timing 3: delay between backlight_vdd and pwm-rise
		 * Timing 4: delay between pwm-rise and backlight_en-rise
		 */
		panel-timings = <0 0 0 0>;
	};

	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
//currently broken
	usb@0x7d000000 {
		status = "ok";
		host-mode = <1>;
		vbus-gpio = <&gpio 157 3>;	/* PT5, USBO1_EN */
	};

	usbphya: usbphy@0 {
		compatible = "smsc,usb3315";
		status = "ok";
	};

	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
	usb@0x7d004000 {
		status = "ok";
		utmi = <&usbphya>;
		host-mode = <0>;
		vbus-gpio = <&gpio 233 3>;	/* PDD1, USBH_EN */
	};

	usbphyb: usbphy@0 {
		compatible = "smsc,usb3315";
		status = "ok";
	};

	/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
	usb@0x7d008000 {
		status = "ok";
		utmi = <&usbphyb>;
		host-mode = <0>;
	};
};