if ARCH_IMX8

config RECOVER_SPL_DATA_SECTION
	bool
	help
	  Save SPL DATA section for cold boot, restore at warm boot

config AHAB_BOOT
	bool "Support i.MX8 AHAB features"
	imply CMD_DEKBLOB
	help
	  This option enables the support for AHAB secure boot.

config BOOTAUX_RESERVED_MEM_BASE
	hex "Define the reserved memory base address"
	default 0x0
	help
	  reserve DDR memory for bootaux

config BOOTAUX_RESERVED_MEM_SIZE
	hex "Define the reserved memory size"
	default 0x0
	help
	  This memory will be reserved by system and linux cannot access.

config IMX_LOAD_HDMI_FIMRWARE_RX
	bool "Enable HDMI rx firmware loading"
	depends on ARCH_IMX8 || VIDEO_IMX_HDP_LOAD
	help
	  This enable the hdmi rx firmware loading. It depends on the "hdprx" command.

config IMX_LOAD_HDMI_FIMRWARE_TX
	bool "Enable HDMI tx firmware loading"
	depends on ARCH_IMX8 || VIDEO_IMX_HDP_LOAD
	help
	  This enable the hdmi tx firmware loading. It depends on the "hdp" command.

config IMX8
	bool

config MU_BASE_SPL
	hex "MU base address used in SPL"
	default 0x5d1b0000
	help
	  SPL runs in EL3 mode, it use MU0_A to communicate with SCU.
	  So we could not reuse the one in dts which is for normal U-Boot.

config IMX8QM
	select IMX8
	select SUPPORT_SPL
	select RECOVER_SPL_DATA_SECTION
	bool

config IMX8QXP
	select IMX8
	select SUPPORT_SPL
	select RECOVER_SPL_DATA_SECTION
	bool

config IMX8DXL
	select IMX8
	select SUPPORT_SPL
	select RECOVER_SPL_DATA_SECTION
	bool

config SYS_SOC
	default "imx8"

config SPL_LOAD_IMX_CONTAINER
	bool "Enable SPL loading U-Boot as a i.MX Container image"
	depends on SPL
	help
	  This is to let SPL could load i.MX8 Container image

config IMX_CONTAINER_CFG
	string "i.MX Container config file"
	depends on SPL
	help
	  This is to specific the cfg file for generating container
	  image which will be loaded by SPL.

config PSCI_BOARD_REBOOT
	bool "Enable psci board reboot command"
	depends on ARM_PSCI_FW
	help
	  This is a optional command used to trigger system board reboot on imx8.

config IMX8_TRUSTY_XEN
	bool "Support Trusty Xen feature"

choice
	prompt "i.MX8 board select"
	optional

config TARGET_APALIS_IMX8
	bool "Support Apalis iMX8 module"
	select BOARD_LATE_INIT
	select IMX8QM

config TARGET_APALIS_IMX8X
	bool "Support Apalis iMX8X module"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_COLIBRI_IMX8X
	bool "Support Colibri iMX8X module"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_DENEB
	bool "Support i.MX8QXP Capricorn Deneb board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_GIEDI
	bool "Support i.MX8QXP Capricorn Giedi board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8QM_MEK
	bool "Support i.MX8QM MEK board"
	select BOARD_LATE_INIT
	select IMX8QM

config TARGET_IMX8QM_LPDDR4_VAL
	bool "Support i.MX8QM lpddr4 validation board"
	select BOARD_LATE_INIT
	select IMX8QM

config TARGET_IMX8QM_DDR4_VAL
	bool "Support i.MX8QM ddr4 validation board"
	select BOARD_LATE_INIT
	select IMX8QM

config TARGET_IMX8QM_ROM7720_A1
	bool "Support i.MX8QM ROM-7720-A1"
	select BOARD_LATE_INIT
	select SUPPORT_SPL
	select IMX8QM

config TARGET_IMX8QXP_MEK
	bool "Support i.MX8QXP MEK board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8QXP_LPDDR4_VAL
	bool "Support i.MX8QXP lpddr4 validation board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8QXP_DDR3_VAL
	bool "Support i.MX8QXP ddr3 validation board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8X_17X17_VAL
	bool "Support i.MX8QXP/DX 17x17 validation board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8DXL_PHANTOM_MEK
	bool "Support i.MX8DXL PHANTOM MEK board"
	select BOARD_LATE_INIT
	select IMX8QXP

config TARGET_IMX8DX_MEK
	bool "Support i.MX8DX MEK board"
	select BOARD_LATE_INIT
	select SUPPORT_SPL
	select IMX8QXP

config TARGET_IMX8DXL_EVK
	bool "Support i.MX8DXL EVK board"
	select BOARD_LATE_INIT
	select IMX8DXL

config TARGET_IMX8DXL_DDR3_EVK
	bool "Support i.MX8DXL EVK board"
	select BOARD_LATE_INIT
	select IMX8DXL

endchoice

source "board/freescale/imx8qm_mek/Kconfig"
source "board/freescale/imx8qxp_mek/Kconfig"
source "board/freescale/imx8qm_val/Kconfig"
source "board/freescale/imx8qxp_val/Kconfig"
source "board/freescale/imx8dxl_phantom_mek/Kconfig"
source "board/freescale/imx8dxl_evk/Kconfig"
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
source "board/toradex/apalis-imx8x/Kconfig"
source "board/toradex/colibri-imx8x/Kconfig"
source "board/siemens/capricorn/Kconfig"

config SNVS_SEC_SC
	bool "Support SNVS configuration"
	help
	  Allow to configure the SNVS via SCU API to configure tampers and secure
	  violation.

config SNVS_SEC_SC_AUTO
	bool "Support SNVS configuration command"
	depends on SNVS_SEC_SC
	help
	  This configuration will apply the selected configurations automatically
	  at boot.

endif