From be360d9824d653780ebd3ffc08f1938a8e3dd747 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 29 Oct 2005 23:50:20 +0200 Subject: More verbose CHANGELOG entry. --- CHANGELOG | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index 6b0a787d09..0211b02ee4 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -3,6 +3,26 @@ Changes for U-Boot 1.1.4: ====================================================================== * Add support for multiple PHYs. + Tested on the following boards: + cmcpu2 (at91rm9200/ether.c) + PPChameleon (ppc4xx/4xx_enet.c) + yukon (mpc8220/fec.c) + uc100 (mpc8xx/fec.c) + tqm834x (mpc834x/tsec.c) with EEPRO100 + lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c) + Main changes include: + common/miiphyutil.c + - miiphy_register routine was added to allow multiple PHYs to be registered + - miiphy_read and miiphy_write are now defined in this file, and + require additional argument (char *devname) + - other miiphy_* routines also require additional device name argument + ../lib_i386/board.c + ../lib_ppc/board.c + Calling reset_phy() was moved to be executed *after* eth_initialize(). + This is necessary as now some of the implementations of reset_phy() + may need to use miiphy_reset() which is not allowed before eth_initialize() + as eth_initialize registers all required miiphy_* routines. + Tested on IP860 and PHY initializes properly after this change. * Correct includes for flat tree builder. -- cgit v1.2.3