summaryrefslogtreecommitdiff
path: root/board
AgeCommit message (Expand)Author
2018-08-13MLK-19157 imx8mm_evk: Disable dsi panel before booting kernelYe Li
2018-07-25MLK-19045 imx8mm_evk: enable the dispmix & mipi phy power domainBai Ping
2018-07-20MLK-18431-03 imx8mm_evk: use the more generic dram init flow on imx8mm evkBai Ping
2018-07-18MLK-18945-10 imx8mm_evk: Add splash screen support for MIPI DSIYe Li
2018-07-17MLK-18945-5 mx7ulp_evk: Update board codes for mipi displayYe Li
2018-07-16Revert "MLK-18502: board:imx8mm_evk enable tzasc"Silvano di Ninno
2018-07-05MLK-18623-2 imx8mm_val: use clock API to set DRAM APB clockYe Li
2018-07-05MLK-18623-1 imx8mm_evk: Fix NOC and NOC APB clocks issueYe Li
2018-07-04MA-12124 [Android] Fix build warnings for u-bootLuo Ji
2018-07-04[iot] Move i2c_setup calls to board_initBraden Kell
2018-07-04[iot] Add imx8m-phanbell supportHaoran.Wang
2018-06-25MLK-18654-4 imx8mm_evk: Enable SPL SDP for iMX8MM EVK boardYe Li
2018-06-21MLK-18639-3 imx8mm_val: Add board codes for iMX8MM DDR4 validation boardYe Li
2018-06-18MLK-18502: board:imx8mm_evk enable tzascSilvano di Ninno
2018-06-13MLK-18577-7 imx8qm: mek: support uboot in vmPeng Fan
2018-05-31MLK-18437-5 imx8mm_evk: Implement the board_ehci_usb_phy_modeYe Li
2018-05-31MLK-18437-4 tcpc: Enable DRP when setting DFP or UFPYe Li
2018-05-31MLK-18437-3 imx8mm_evk: Implement the PD switch callback for NX20P3483Ye Li
2018-05-31MLK-18437-2 tcpc: Add external PD switch call backYe Li
2018-05-29MLK-18346 imx: 8mm_evk: remove the duplicated performance settingsPeng Fan
2018-05-23MLK-18378 imx8mm_evk: Add mfgtool supportYe Li
2018-05-23MLK-18377 imx8mm_evk: Enable WDOG_B for SPL and u-boot resetYe Li
2018-05-18MLK-18344: add OP-TEE support for i.Mx 8MMSilvano di Ninno
2018-05-17MLK-18325 imx8mm_evk: add pmic BD71837/BD71840 support in splRobin Gong
2018-05-15MLK-18318: mx7ulp: Enable QSPI interrupt as a wakeup source on MX7ULPFabio Estevam
2018-05-15MA-11866-1[Android] Bring up imx8mm-evk board for androidZhang Bo
2018-05-11MLK-18290-5 imx8mm_evk: Add board codes for USBYe Li
2018-05-11MLK-18289-2 imx8mm_evk: Add codes to setup typec PD chargingYe Li
2018-05-11MLK-18289-1 tcpc: Update driver to support two ports logicYe Li
2018-05-11MLK-18288 imx8mm_evk: Fix USDHC2 CD issueYe Li
2018-05-10MLK-18243-18: arm: imx: add i.MX8MM EVK board supportPeng Fan
2018-05-08MLK-18240 imx8qxb0: change the i.MX8QXPB0 NAND iomux settingsHan Xu
2018-05-04MLK-18199: Power up HSIO GPIO before first accessTeo Hall
2018-04-27MLK-18129-2 imx8qxp: Add secure boot environmentYe Li
2018-04-12Add imx8m-phanbell supportHaoran.Wang
2018-04-01Convert CONFIG_CMD_BLOB to KconfigSimon Glass
2018-03-19MLK-17821-3 imx8qxp/qm: Add board codes to adapt CDNS3 USB gadget driverYe Li
2018-03-13MLK-17785 mx7ulp_evk: Update DDR freq to 352.8Mhz for ULP B0Ye Li
2018-02-24MLK-17573-3 imx8mq_evk: Enable USB host support on typec portYe Li
2018-02-24MLK-17573-1 tcpc: Add interface to set UFP modeYe Li
2018-02-13MLK-17346 board: imx8mq: Change the SW3A standby mode to offBai Ping
2018-02-13MLK-17590 board: imx8mq: update the lpddr4 training flowBai Ping
2018-02-13MLK-17404-5 board: freescale: Adding support for i.MX8MQ EVK displayOliver Brown
2018-02-10MLK-17585 imx8/imx8m: Disable TRUST_OF_CHAIN for secure bootYe Li
2018-01-25MA-10071 [iot] Add board support imx7d multafang hui
2018-01-25MA-10732[Android] Change pmic sw3 mode to avoid DDR power offZhang Bo
2018-01-17MLK-17402 imx8qm/qxp_arm2: Reset ENET1 PHY and MAX7322 at initYe Li
2018-01-17MA-10983-1 Load HDMI firmware from u-boot.binHaoran.Wang
2018-01-16MLK-17376 typec: support power source with 2 stages of capabilityJun Li
2018-01-09MLK-17313-3 imx8mq_evk: Add USB PD power sink supportYe Li
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-03 08:27:07 +0000