summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-03-31Prepare v2010.03v2010.03Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-31net, doc: How to setup MAC address correctlyHeiko Schocher
As this seems unclear, document how the flow of setting up the MAC address is correct. Signed-off-by: Heiko Schocher <hs@denx.de> Text changed slightly, adding input from Mike Frysinger. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-31net, fec_mxc: only setup the device enetaddr with eeprom valueHeiko Schocher
Only fill the device enetaddr with the contents of the eeprom, do not program it in MAC address registers Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Ben Warren <biggerbadderben@gmail.com>
2010-03-31doc: Fix ramdisk examples in doc/uImage.FIT/multi.itsFelix Radensky
The ramdisk sections in doc/uImage.FIT/multi.its lack load address and entry point properties. Using examples from this file will result in unbootable image, u-boot will issue the following error messages: Can't get ramdisk subimage load address! Ramdisk image is corrupt or invalid This patch adds missing properties to ramdisk sections. Signed-off-by: Felix Radensky <felix@embedded-sol.com>
2010-03-31jffs2, suen3: Fix compiler warningHeiko Schocher
$ ./MAKEALL suen3 jffs2_1pass.c: In function 'get_fl_mem': jffs2_1pass.c:399: warning: unused variable 'id' jffs2_1pass.c: In function 'get_node_mem': jffs2_1pass.c:423: warning: unused variable 'id' Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Tom <Tom.Rix@windriver.com>
2010-03-30Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
2010-03-30Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk
2010-03-30mpc86xx: set the DDR BATs after calculating true DDR sizeTimur Tabi
After determining how much DDR is actually in the system, set DBAT0 and IBAT0 accordingly. This ensures that the CPU won't attempt to access (via speculation) addresses outside of actual memory. On 86xx systems, DBAT0 and IBAT0 (the BATs for DDR) are initialized to 2GB and kept that way. If the system has less than 2GB of memory (typical for an MPC8610 HPCD), the CPU may attempt to access this memory during speculation. The zlib code is notorious for generating such memory reads, and indeed on the MPC8610, uncompressing the Linux kernel causes a machine check (without this patch). Currently we are limited to power of two sized DDR since we only use a single bat. If a non-power of two size is used that is less than CONFIG_MAX_MEM_MAPPED u-boot will crash. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-3085xx: Fix enabling of L1 cache parity on secondary coresKumar Gala
Use the same code between primary and secondary cores to init the L1 cache. We were not enabling cache parity on the secondary cores. Also, reworked the L1 cache init code to match the e500mc L2 init code that first invalidates the cache and locks. Than enables the cache and makes sure its enabled before continuing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-30ppc4xx: Fix problem with I2C bus >= 1 initializationStefan Roese
This patch fixes a problem introduced with patch eb5eb2b0 [ppc4xx: Cleanup PPC4xx I2C infrastructure]. We need to assign the I2C base address to the "i2c" pointer inside of the controller loop. Otherwise controller 0 is initialized multiple times instead of initializing each I2C controller sequentially. Tested on Katmai. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
2010-03-29bootm, linux: fix booting Multi-File Image with "kernel+ramdisk+fdt"Heiko Schocher
Booting a "Multi-File Image" including a linux kernel, ramdisk and fdt, generated with mkimage -A ppc \ -O linux \ -T multi \ -C gzip \ -a 00000000 \ -e 00000000 \ -n "kernel-2.6+initrd+dtb" \ -d "vmlinux.bin.gz:ramdisk_image.gz:board.dtb" \ multi.bin actually fails, because ramdisk start and end addresses didn;t get initialized. This patch fixes this issue. Tested on the KUP4K board. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-28Prepare 2010.03-rc3v2010.03-rc3Wolfgang Denk
Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-28cmd_usb.c: print debug messages only when DEBUG is definedWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-28ml300: remove support for broken, orphaned boardWolfgang Denk
The ml300 board has a number of issues, but nobody cares about this long-orphaned board any more. Remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Michal Simek <monstr@monstr.eu>
2010-03-28Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
2010-03-28mkimage: fix Segmentation Fault when run without "-n name" optionWolfgang Denk
The restructuring of the mkimage command in commit 89a4d6b1 ("tools: mkimage: split code into core, default and FIT image specific") introduced a bug that caused mkimage to segfault when run without "-n name" option. Initialize the imagename entry to prevent that. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-28Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk
2010-03-25cfi_flash: precision and underflow problem in tout calculationRenato Andreola
With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000. Signed-off-by: Renato Andreola <renato.andreola@imagos.it> Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>
2010-03-24ppc4xx fix unstable 440EPx bootstrap optionsRupjyoti Sarmah
440EPx fixed bootstrap options A, B, D, and E sets PLL FWDVA to a value = 1. This results in the PLLOUTB being greater than the CPU clock frequency resulting unstable 440EPx operation resulting in various software hang conditions. This patch reprograms the FWDVA satisfying the requirement of setting FWDVB to a value greater than 1 while using one of the four deafult bootstrap options. Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> Acked-by : Victor Gallardo <vgallardo@appliedmicro.com> Signed-off-by: Stefan Roese <sr@denx.de>
2010-03-24Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
2010-03-24at91: Get rid of some warnings when building for otc570Matthias Fuchs
The soft-i2c code for AT91 defines I2C_SOFT_DECLARATIONS for direct access by dereferencing a pio pointer. The OTC570 platform uses the AT91 gpio API so it does not need the pio variable. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
2010-03-24lcd: make 16bpp workAlessandro Rubini
Support for 16bpp was supposed to be in the code but was not working. This makes it work and has been tested in the nhk8815 board. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-22Prepare v2010.03-rc2v2010.03-rc2Wolfgang Denk
Update CHANGELOG Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-22ep93xx timer: Fix resolution of get_ticks()Matthias Kaehlcke
ep93xx timer: Make get_ticks() return a value in CONFIG_SYS_HZ resolution, as announced by get_tbclk() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-03-22ep93xx timer: Fix possible overflow in usecs_to_ticks()Matthias Kaehlcke
ep93xx timer: Use 64-bit values in usecs_to_ticks() in order to avoid overflows in intermediate values Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
2010-03-21correct a syntax typo in at91_matrix.hAsen Dimov
Signed-off-by: Asen Dimov <dimov@ronetix.at>
2010-03-21env: fix endian ordering in crc tableJeff Angielski
The crc table was being built as little endian for big endian targets. This would cause fw_printenv to always fail with "Warning: Bad CRC, using default environment" messages. Signed-off-by: Jeff Angielski <jeff@theptrgroup.com> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-03-21mpc5121: cpu/mpc512x/diu.c: fix warningsAnatolij Gustschin
Fix warnings while compiling with CONFIG_VIDEO enabled: diu.c: In function 'video_hw_init': diu.c:158: warning: 'return' with no value, in function returning non-void diu.c:162: warning: format '%ld' expects type 'long int', but argument 6 has type 'int' diu.c:162: warning: format '%ld' expects type 'long int', but argument 7 has type 'int' Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-21console.c: fix problem with splashimageAnatolij Gustschin
If a board uses cfb_console driver and splash image and also defines CONFIG_SILENT_CONSOLE, the user is locked out even if "silent" is not set. It is not possible to get any output, neither on vga console device nor on serial console after redirecting the output to the serial console, since the GD_FLG_SILENT flag remains set. Fix the problem by redirecting the output from frame buffer to serial console if splashimage is used. Only suppress the output if "silent" environment variable was set and don't set the GD_FLG_SILENT flag arbitrarily. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-21mod change 755 => 644 for multiple filesThomas Weber
I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;' Signed-off-by: Thomas Weber <swirl@gmx.li> Add some more: neither Makefile nor config.mk need execute permissions. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-21mxcmmc: fix warnings due to access 32 bit registers with 16 bit accessorsStefano Babic
Some registers of the mxcmmc driver were accessed using 16 bit accessor functions, because only the LSB is significant. This is not needed and generates warnings. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-03-21TFTP: allow for adjustable retransmission timoutWolfgang Denk
So far, TFTP negotiated a fixed retransmission timeout of 5 seconds. In some cases (busy networks, slow TFTP servers) this caused very slow transfers. A new environment variable "tftptimeout" allows to set this timeout. Lowering this value may make downloads succeed faster in networks with high packet loss rates or with unreliable TFTP servers. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Ben Warren <biggerbadderben@gmail.com> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-03-21Fix PCI_BASE_ADDRESS_5 handling in pci_hose_config_device()Wolfgang Denk
Signed-off-by: FUJITA Kazutoshi <fujita@soum.co.jp> Signed-off-by: <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
2010-03-21cmd_mmc remove \nFrans Meulenbroeks
This patch removes the \n after the help message for mmcinfo. This resulted in an empty line being displayed after the mmcinfo line when the help command was given. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-03-16nios2: Added support to YANU UARTRenato Andreola
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-03-16nios2: use generic unaligned.hThomas Chou
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
2010-03-14Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
2010-03-14asm-blackfin/unaligned.h: add for zlib codeMike Frysinger
The new zlib code wants asm/unaligned.h, so have the Blackfin version pull in the asm-generic/unaligned.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-14asm-generic/unaligned.h: dynamic default unaligned accessesMike Frysinger
This is based on the asm-arm/unaligned.h, but made generic so all arches that cannot do unaligned accesses can utilize it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-13video: Fix console display when splashscreen is usedMatthias Weisser
If a splashscreen is used the console scrolling used the scroll size as needed when a logo was displayed. This patch sets the scroll size to the whole screen if a splashscreen is shown. Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de>
2010-03-12Prepare v2010.03-rc1v2010.03-rc1Wolfgang Denk
Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-12standalone eepro100_eeprom: fix build errorWolfgang Denk
Building examples/standalone/eepro100_eeprom triggers this error: In file included from include/common.h:629, from eepro100_eeprom.c:24: include/net.h: In function 'NetReadIP': include/net.h:430: warning: implicit declaration of function 'memcpy' eepro100_eeprom.c: At top level: eepro100_eeprom.c:81: error: conflicting types for 'memcpy' include/net.h:430: error: previous implicit declaration of 'memcpy' was here Fix this. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-12Update .gitignore's: add some generated filesWolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-03-12mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.Detlev Zundel
This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com>
2010-03-1285xx: Drop FIT support to allow u-boot image to fit in 512kKumar Gala
The 36-bit build exceeds the 512k size we have. Removing FIT type image support allows us to fit and we dont really use it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-12Cosmetic change - indentation correction.Michael Zaidman
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
2010-03-12cmd_mtdparts.c: prevent printbuffer overflowsAnatolij Gustschin
The length of configured MTDPARTS_DEFAULT string could be greater than console printbuffer size. Replace printf() by puts() to avoid potential buffer overflows. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-03-12Fix MPC8536DS documentationFrans Meulenbroeks
This patch corrects small mistake in the register list in doc/README.mpc8536ds. These registers are 32 bits and this one starts at ....c not ....e When using the ...c address I can boot from sd, when using the ...e address I cannot. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Acked-by: Hu Mingkai <B21284@freescale.com>
2010-03-12doc: add README for CONFIG_HWCONFIG optionHeiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2010-03-12TQM8xx: enable device tree support on all TQM8xx based boards.Heiko Schocher
Also enable support for CONFIG_HWCONFIG because we use this for configuring if this hardware has a FEC or not. syntax: hwconfig=fec:on if hardware has an fec hwconfig=fec:off if hardware has no fec Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 22:38:29 +0000