u-boot-toradex.git - U-Boot bootloader for Apalis and Colibri modules

Age	Commit message (Expand)	Author
2019-03-20	colibri-imx8qxp: clean-up configuration	Marcel Ziswiler
2019-03-20	colibri-imx8qxp: clean-up device tree	Marcel Ziswiler
2019-03-20	colibri-imx8qxp: fix top-level compatible	Marcel Ziswiler
2019-03-20	colibri-imx8qxp: adjust copyright/licensing headers	Marcel Ziswiler
2019-02-14	colibri-imx8qxp: add unused pins as gpio	Max Krummenacher
2019-01-30	apalis-imx8: forward port to 2018.03	Max Krummenacher
2019-01-30	colibri-imx8qxp: forward port to 2018.03	Max Krummenacher
2019-01-30	apalis-imx8.c: fix typo	Max Krummenacher
2019-01-30	pf8100: add pmic fusing command	Max Krummenacher
2019-01-30	scfw: add additional controls for pmic i2c access	Max Krummenacher
2019-01-30	colibri-imx8qxp: synchronize with imx8qxp-mek from beta2	Max Krummenacher
2019-01-30	colibri-imx8qxp: move debug uart to lpuart3	Max Krummenacher
2019-01-30	colibri-imx8qxp: initial add	Max Krummenacher
2019-01-30	Makefiles: add a i.MX8 flash.bin target	Max Krummenacher
2019-01-30	tdx-cfg-block.c: correct colibri imx8 string	Max Krummenacher
2019-01-30	apalis-imx8: config: remove pcie and sata	Max Krummenacher
2019-01-30	apalis-imx8: boot from SD card for now	Stefan Agner
2019-01-30	tdx-cfg-block: add Apalis iMX8 QuadMax support	Stefan Agner
2019-01-30	toradex: configblock: add an -y parameter to 'cfgblock create’	Dominik Sliwa
2019-01-30	toradex: configblock: initialize MMC before switching partition	Stefan Agner
2019-01-30	tdx-cfg-block: add config block support	Stefan Agner
2019-01-30	tdx-cfg-block: add new SKUs	Stefan Agner
2019-01-30	tdx-cfg-block: add new sku's	Max Krummenacher
2019-01-30	apalis-imx8: add default memory layout and network options	Stefan Agner
2019-01-30	apalis-imx8: use eMMC as environment location/default boot device	Stefan Agner
2019-01-30	apalis-imx8: load HDMI firmware	Stefan Agner
2019-01-30	apalis-imx8: set device tree to Apalis DT by default	Stefan Agner
2019-01-30	apalis-imx8: remove unused GPIOs	Stefan Agner
2019-01-30	apalis-imx8: use UART1 as console UART	Stefan Agner
2019-01-30	imx8: support UART1 as console UART for Apalis iMX8	Stefan Agner
2019-01-30	apalis-imx8: fix Ethernet	Stefan Agner
2019-01-30	apalis-imx8: remove PCA9557 GPIO controllers	Stefan Agner
2019-01-30	apalis-imx8: remove unavailable peripherals	Stefan Agner
2019-01-30	apalis-imx8: fix eMMC/MMC/SD interface muxing	Stefan Agner
2019-01-30	apalis-imx8: add Apalis iMX8 specific device tree	Stefan Agner
2019-01-30	apalis-imx8: initial add	Stefan Agner
2018-12-24	MA-13832 [Trusty] Support random rpmb key set	Ji Luo
2018-12-24	MA-13831-3 [trusty] Add command to generate rng with CAAM	Ji Luo
2018-12-21	MA-13303 fix the issue with 8qm boot from eMMC to flash SD	faqiang.zhu
2018-12-20	MLK-20635 imx8: clock: Fix GPR settings for FEC	Ye Li
2018-12-20	MA-13785 remove the fastboot command of ucmd and acmd	faqiang.zhu
2018-12-19	MLK-20583-2 imx: mx6sabreauto: Enable OCOTP CTRL clock in DCD and plugin	Breno Lima
2018-12-19	MLK-20583-1 imx: mx6sabresd: Enable OCOTP CTRL clock in DCD and plugin	Breno Lima
2018-12-19	MLK-20602 imx8mq: Change clock source of GIC	Bai Ping
2018-12-19	MA-13788 add defconfig for aiy_imx8mq uboot used by uuu	faqiang.zhu
2018-12-14	MA-13748 Pass BDADDR from uboot cmdline	yang.tian
2018-12-13	MLK-20553-4 doc: imx: hab: Remove extra hab directory for a cleaner documenta...	Breno Lima
2018-12-13	MLK-20553-3 doc: imx: ahab: Add Secure Boot documentation for i.MX8 and i.MX8...	Breno Lima
2018-12-13	MLK-20553-2 doc: imx: ahab: Add AHAB secure boot documentation for i.MX 8 and...	Clement Le Marquis
2018-12-13	MLK-20553-1 doc: imx: ahab: Add AHAB introduction	Breno Lima