index
:
u-boot-toradex.git
2011.12-colibri_vf
2014.04-toradex
2014.10-toradex
2014.10-toradex-next
2015.04-imx7-1.1.0_ga-toradex-next
2015.04-toradex
2015.04-toradex-next
2016.11-toradex
2016.11-toradex-next
colibri
colibri-next
colibri_vf
toradex_2019.07
toradex_2019.07-next
toradex_2020.07
toradex_imx6
toradex_imx_lf_v2022.04
toradex_imx_v2017.03_4.9.123_imx8mm_ga-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta1-bring_up
toradex_imx_v2017.03_4.9.51_imx8_beta2-bring_up
toradex_imx_v2018.03_4.14.62_1.0.0_beta-bringup
toradex_imx_v2018.03_4.14.78_1.0.0_ga-bringup
toradex_imx_v2018.03_4.14.98_2.3.0_bringup
toradex_imx_v2020.04_5.4.24_2.1.0
toradex_imx_v2020.04_5.4.70_2.3.0
toradex_ti-u-boot-2021.01_bringup
toradex_ti-u-boot-2023.04
U-Boot bootloader for Apalis and Colibri modules
Marcel Ziswiler
summary
refs
log
tree
commit
diff
log msg
author
committer
range
Age
Commit message (
Expand
)
Author
2017-08-22
MLK-16238-2 imx: Update CPU info print to support TMU
Ye Li
2017-08-22
MLK-16238-1 thermal: Add TMU driver for i.MX8M
Ye Li
2017-08-18
MLK-16219 pca953x_gpio: Clear the polarity invert register at init
Ye Li
2017-08-18
MLK-16208-3 imx8qm/qxp: Enable the CPU thermal sensor to get temperature
Ye Li
2017-08-18
MLK-16208-2 imx8qm/qxp: add function to read ARM core part number
Ye Li
2017-08-18
MLK-16208-1 thermal: Add driver to support i.MX8QM/QXP CPU thermal sensor
Ye Li
2017-08-18
mmc: fsl_esdhc: fix build issue
Peng Fan
2017-08-17
MLK-16198-4 imx8qm/qxp: Update ARM2 boards to support xhci and ehci at same time
Ye Li
2017-08-17
MLK-16198-3 usb: xhci-imx8: Add core reset function
Ye Li
2017-08-17
MLK-16198-2 usb: xhci-imx8: Add clock init interface
Ye Li
2017-08-17
MLK-16198-1 usb: xhci-imx8: Add basic DM support
Ye Li
2017-08-17
MLK-16188-5 dts: imx8qxp arm2: add off-on-delay-us
Peng Fan
2017-08-17
MLK-16188-4: drivers: regulator: fixed: add off-on-delay-us
Peng Fan
2017-08-17
MLK-16188-3 mmc: fsl_esdhc: support tuning for hs200 and sdr104
Peng Fan
2017-08-17
MLK-16188-2 dts: imx8qm/qxp: sync usdhc from kernel
Peng Fan
2017-08-17
MLK-16188-1 mmc: add mmc_send_tuning function
Peng Fan
2017-08-17
mmc: Retry some MMC cmds on failure
Vignesh R
2017-08-17
mmc: Change mode when switching to a boot partition
Jean-Jacques Hiblot
2017-08-17
mmc: Add support for UHS modes
Jean-Jacques Hiblot
2017-08-17
mmc: Add a new callback function to check if the card is busy
Jean-Jacques Hiblot
2017-08-17
mmc: add HS200 support in MMC core
Jean-Jacques Hiblot
2017-08-17
mmc: Add a execute_tuning() callback to the mmc operations.
Jean-Jacques Hiblot
2017-08-17
mmc: disable the mmc clock during power off
Kishon Vijay Abraham I
2017-08-17
mmc: add a new mmc parameter to disable mmc clock
Jean-Jacques Hiblot
2017-08-17
mmc: add power cyle support in mmc core
Jean-Jacques Hiblot
2017-08-17
mmc: Add a new callback function to enable/disable vdd
Kishon Vijay Abraham I
2017-08-17
mmc: Enable signal voltage to be selected from mmc core
Kishon Vijay Abraham I
2017-08-17
mmc: make mmc_set_ios() return status
Jean-Jacques Hiblot
2017-08-17
mmc: refactor MMC startup to make it easier to support new modes
Jean-Jacques Hiblot
2017-08-17
mmc: refactor SD startup to make it easier to support new modes
Jean-Jacques Hiblot
2017-08-17
cmd: mmc: display the mode name and current bus speed in the mmc info
Jean-Jacques Hiblot
2017-08-17
mmc: use mmc modes to select the correct bus speed
Jean-Jacques Hiblot
2017-08-17
mmc: Add a fonction to dump the mmc capabilities
Jean-Jacques Hiblot
2017-08-17
mmc: introduces mmc modes.
Jean-Jacques Hiblot
2017-08-17
mmc: add a function to read and test the ext csd (mmc >= 4)
Jean-Jacques Hiblot
2017-08-17
mmc: make ext_csd part of struct mmc
Jean-Jacques Hiblot
2017-08-17
mmc: move the MMC startup for version above v4.0 in a separate function
Jean-Jacques Hiblot
2017-08-17
mmc: split mmc_startup()
Jean-Jacques Hiblot
2017-08-17
mmc: drop unnecessary send_status request
Xu Ziyuan
2017-08-15
MLK-16195: Add support for Mini SAS display boards
Oliver Brown
2017-08-14
MLK-16192 lpi2c: Fix bus stop problem in xfer
Ye Li
2017-08-13
MLK-16187: i.mx8qm/qxp: add flexspi configurations for QM/QXP
Han Xu
2017-08-13
MLK-16186: spi: flexspi: reset the flexspi DLL register to default value
Han Xu
2017-08-13
MLK-16190 DTS: imx8qxp_mek: Fix ioexp and i2c mux issue
Ye Li
2017-08-10
MLK-16181 imx8qm/qxp: Add dcache flush to M4 boot commands
Ye Li
2017-08-10
MLK-16175-2 imx8qm/qxp: Remove USB OTG power domain on function
Ye Li
2017-08-10
MLK-16175-1 usb: ehci-mx6: Turn on the power domain of USB PHY
Ye Li
2017-08-08
MLK-16034-03: support NAND on i.MX8QXP ARM2 board
Han Xu
2017-08-08
MLK-16034-02: enable GPMI NAND driver for i.MX8
Han Xu
2017-08-08
MLK-16034-01: change the maximum oob size
Han Xu
[prev]
[next]