summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-30apalis_imx6: fix vidargs settingsOleksandr Suvorov
The default mxcfb devices were changed in the Toradex Linux kernel. Make the appropriate change in vidargs u-boot env variable. Realted-to: ELB-3240 Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-11-29colibri_imx6: adjust boot orderIgor Opaniuk
Remove duplicate of mmc0, set this boot order: 1) SD 2) eMMC 3) USB 4) DHCP boot Related-to: ELB-3041 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-10-29distro_bootcmd: set devtype for dhcp bootIgor Opaniuk
Set $devtype for DHCP boot, which can be handy for the boot.scr for detection of devtype used (for example, when the same boot.scr is used for both mmc/dhcp boot): if test ${devtype} = "dhcp"; then ... fi Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-10-29toradex: drop legacy nfsboot scriptIgor Opaniuk
Drop legacy nfsboot script in favor of distroboot DHCP boot. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-10-29toradex: set default dhcp distroboot scriptnameIgor Opaniuk
Use the same name of DHCP Distroboot script as in regular eMMC case. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-30colibri_imx7: boot linux kernel in secure modeMarcel Ziswiler
NXP i.MX 7 downstream requires the Linux kernel to boot in secure mode therefore set bootm_boot_mode to sec. We can/will override this in our OE recipe should we build for mainline/upstream. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-09-11apalis_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_imx7: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri_vf: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-11colibri-imx6ull: use preboot for fdtfile evaluationIgor Opaniuk
ENable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28toradex: globally disable video supportIgor Opaniuk
Disable video support for all modules, where it's supported. Relates-to: ELB-2875 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri_imx7: wrap video specific defines if DM_VIDEO ifdefsIgor Opaniuk
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28toradex: drop legacy show_boot_logo function and use splashscreenIgor Opaniuk
Drop show_boot_logo legacy function, as splashscreen functionality can be used instead. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri_imx7: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-28colibri-imx6ull: use splashcreen value instead of legacy functionIgor Opaniuk
Set proper splashscreen env value instead of calling legacy function to show embed boot logo. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-08-12configs: colibri-imx7-emmc: enable bootcmdPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-08-12configs: colibri-imx7: save defconfig using make savedefconfigPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-08-06gitlab-ci: make use of upstream CI on our local infrastracturePhilippe Schenker
And also adjust it to our needs so it runs faster Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-07-20verdin-imx8mm: add EEPROM support for carrier boardIgor Opaniuk
Enable these Kconfig symbols: TDX_CFG_BLOCK_EXTRA=y TDX_HAVE_EEPROM_EXTRA=y Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20ARM: dts: imx8mm-verdin: eeprom nodes adjustmentsIgor Opaniuk
Rename EEPROM nodes. Create aliases for EEPROM to unify their order: eeprom0 - on-module EEPROM eeprom1 - carrier-board EEPROM eeprom2 - MIPI-DSI to HDMI adapter EEPROM Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add carrier board info printingIgor Opaniuk
Add carrier board info printing during boot time: U-Boot 2020.07-rc4-02435-g1756e05 (Jun 22 2020 - 22:43:59 +0300) CPU: Freescale i.MX8MMQ rev1.0 at 1200 MHz .... Carrier: Toradex Verdin Development Board V1.0A, Serial# 10622780 Verdin iMX8MM # Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-clock: add migration routine from PID8Igor Opaniuk
Add migration routine from PID8 pre-stored values on EEPROM (including sane value checks). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add support for EEPROMIgor Opaniuk
This introduces support for EEPROM as a storage for the main Toradex config block and additional config blocks on extra EEPROM chips (on carrier board or video adapters). To enable EEPROM as a storage for the main config block: TDX_HAVE_EEPROM=y. For additional EEPROMs please enable this Kconfig symbol: TDX_CFG_BLOCK_EXTRA=y. Information about existing EEPROM chips is provided via Device Tree using aliases. You can also write configuration for the carrier board using create_carrier subcommand for cfgblock. Example: Verdin iMX8MM # cfgblock create_carrier Supported carrier boards: UNKNOWN CARRIER = [0] Verdin Carrier Board = [1] Choose your carrier board (provide ID): 1 Enter carrier board version (e.g. V1.1B): V1.0A Enter carrier board serial number: 10622780 Also with barcode: Verdin iMX8MM # cfgblock create carrier -y 0156100010622780 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add carrier boards and display adaptersIgor Opaniuk
Add defines for supported carrier boards and display adapters. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20toradex: tdx-cfg-block: add EEPROM read/store wrappersIgor Opaniuk
These functions wrap functionality for storing config blocks in EEPROM. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-20imx: mx7: fix DDRC size in A7-M4 mapping tableIgor Opaniuk
According to i.MX 7Solo Applications Processor Reference Manual, 2.1.3 Cortex-M4 Memory Map, M4 can address only 1536MB of DDRC (Start Address: 0x8000_0000; End Address: 0xDFFF_FFFF). Correct DDRC size to 0x60000000. Fixes: c0f037f6("mach-imx: bootaux: elf firmware support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15colibri-imx7: fix splash logo drawingIgor Opaniuk
1. Configure white on black for video console. 2. Enable printing bmp logo during late board init stage. 3. Use iomux configuration from device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15colibri-imx6ull: fix splash screen logo drawingIgor Opaniuk
Configure white on black for video console. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15colibri-imx6ull: show boot logoIgor Opaniuk
1. Show boot logo embed in U-Boot blob. 2. Drop iomux configration for LCD, and use the one provided in device tree. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15ARM: dts: imx7-colibri: multiple node updatesIgor Opaniuk
1. Move u-boot specific nodes to u-boot dts include: legacy lcdif node and aliases. 2. Add iomux configuration for LCD. 3. Drop un-needed u-boot,dm-pre-reloc for alias node. 4. Fix display-timings, use the one from Toradex downstream kernel [1] [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n206 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15toradex: common: show boot logoIgor Opaniuk
Add function for showing boot logo, embed into u-boot blob. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-15ARM: dts: imx6ull-colibri: move u-boot specific nodeIgor Opaniuk
1. Move aliases and legacy lcdif node to the u-boot specific dts include. 2. Provide proper display timings, as in the downstream Toradex kernel [1]. [1]: https://git.toradex.com/cgit/linux-toradex.git/tree/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi?h=toradex_4.9-2.3.x-imx#n183 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-07-06Prepare v2020.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-06configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-05Merge branch '2020-07-05-gpio-regression-fix'Tom Rini
- Merge a fix to the gpio uclass and a test for it.
2020-07-05sandbox, test: add test for GPIO_HOG functionHeiko Schocher
currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality. For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-07-05gpio-uclass.c: save the GPIOD flags also in the gpio descriptorHeiko Schocher
save the GPIOD_ flags also in the gpio descriptor. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Fixes: 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags") Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Walter Lozano <walter.lozano@collabora.com>
2020-07-03Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- sbi: Add newline to error message - fu540: dts: Correct reg size of otp and dmc nodes - Enhance reserved memory fixup about PMP information passed from OpenSBI - sifive: fu540: Add gpio-restart support - qemu-riscv: Update QEMU run command - Assorted fixes related to reserved memory - fu540: enable all cache ways from U-Boot proper - use log functions in fdt_fixup
2020-07-03riscv: use log functions in fdt_fixupHeinrich Schuchardt
Replace printf() and debug() by log_err() and log_debug(). "No reserved memory region found in source FDT\n" is not an error but a debug information. %s/can not/cannot/ - use the more common spelling. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-07-03riscv: sifive: fu540: enable all cache ways from U-Boot properPragnesh Patel
Add L2 cache node to enable all cache ways from U-Boot proper. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-03riscv: Use optimized version of fdtdec_get_addr_size_no_parentAtish Patra
fdtdec_get_addr_size_no_parent is not an optimized version if parent node is already available with the caller. Use fdtdec_get_addr_size_auto_parent to read the "reg" property Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-03riscv: Do not return error if reserved node already existsAtish Patra
Not all errors are fatal. If a reserved memory node already exists in the destination device tree, we can continue to boot without failing. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com>
2020-07-03doc: qemu-riscv: Update QEMU run commandBin Meng
Explicitly pass the "-bios" option to QEMU to run U-Boot, instead of the "-kernel" option, as we know that "-bios" behavior will be changed since QEMU 5.1.0. This also updates validated QEMU version to 5.0.0. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-07-03riscv: sifive: fu540: Add gpio-restart supportBin Meng
The HiFive Unleashed board wires GPIO pin#10 to the input of the system reset signal. This adds gpio reboot support. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Tested-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-03riscv: Do not build reset.c if SYSRESET is onBin Meng
SYSRESET uclass driver already provides all the reset APIs, hence exclude our own ad-hoc reset.c implementation. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Sagar Kadam <sagar.kadam@sifive.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
2020-07-02riscv: Enable CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATEBin Meng
Starting from OpenSBI v0.7, the SBI firmware inserts/fixes up the reserved memory node for PMP protected memory regions. All RISC-V boards need to copy the reserved memory node from the device tree provided by the firmware to the device tree used by U-Boot. Turn on CONFIG_OF_BOARD_FIXUP by default for OF_SEPARATE. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-07-02riscv: Expand the DT size before copy reserved memory nodeBin Meng
The FDT blob might not have sufficient space to hold a copy of reserved memory node. Expand it before the copy. Reported-by: Rick Chen <rick@andestech.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com>
2020-07-02riscv: Avoid the reserved memory fixup if src and dst point to the same placeBin Meng
The copy of reserved memory node from source dtb to destination dtb can be avoided if they point to the same place. This is useful when OF_PRIOR_STAGE is used. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2020-07-02riscv: fu540: dts: Correct reg size of otp and dmc nodesBin Meng
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Pragnesh Patel <pragnesh.patel@sifive.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-12 11:32:15 +0000