summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-14apalis-imx8x: usb3 bringupVerdin-iMX8MM_Console-Image_3.0b4.254-20200421Colibri-iMX8X_Console-Image_3.0b4.254-20200421Apalis-iMX8_Console-Image_3.0b4.254-20200421Apalis-iMX8X_Console-Image_3.0b4.254-20200421Philippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-27verdin-imx8mm: add overlay capabilitiesStefan Eichenberger
All Toradex modules have OF_LIBFDT_OVERLAY enabled but not Verdin iMX8MM so far. This commit enables devicetree overlay capabilities on U-Boot for Verdin iMX8MM. Tested with ATF rel_imx_4.14.98_2.3.1_patch, firmware-imx-8.1.1 and imx-mkimage imx_4.14.98_2.3.0. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
2020-03-25verdin-imx8mm_defconfig: follow renamed dtb nameMax Krummenacher
Related-to: ELB-2322 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-24tdx-cfg-block: add proper defines for other Verdin SKUsIgor Opaniuk
1. Add support for these two modules: Verdin iMX8M Nano SoloLite 1GB Verdin iMX8M Mini DualLite 1GB 2. Rename VERDIN_IMX8MM define to VERDIN_IMX8MMQ_WIFI_BT_IT Relates-to: ELB-2602 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-03-24apalis-imx8x: sync with MEK platformIgor Opaniuk
1. Enable CONFIG_SNVS_SEC_SC_AUTO by default 2. Move BOOTAUX_* defines to defconfig Related-to: ELB-2605 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-03-24verdin-imx8mm: sync with EVK boardIgor Opaniuk
1. MMC_UHS/HS_ enable in defconfig by default 2. VDD_DRAM/VDD_SOC changes in SPL 3. FEC anatop clock fixes Related-to: ELB-2605 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-03-24apalis-imx8: sync with MEK platformIgor Opaniuk
1. Adding power-up of base board via SCFW 2. Moved BOOTAUX defines to defconfig Related-to: ELB-2605 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-03-23colibri-imx8qxp: sync with MEK platformIgor Opaniuk
1. Enable CONFIG_SNVS_SEC_SC_AUTO by default 2. Move BOOTAUX_* defines to defconfig Related-to: ELB-2605 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-03-18tdx-cfg-block: adjust verdin namingPhilippe Schenker
Related-to: ELB-2316 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-16apalis-imx8: Fix hardware version detection in recovery modeMarcel Ziswiler
Make sure recent version detection implementation is also used during recovery mode. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-13apalis-imx8: Remove fdt_file env variablePhilippe Schenker
This variable is deprecated, therefore remove it. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-13apalis-imx8: Implement hardware version detectionPhilippe Schenker
And select the correct devicetree to load. Related-to: ELB-1254 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-10mmc board code: add a weak common implementationMax Krummenacher
NXP common code now calls a board function mmc_map_to_kernel_blk(). Provide a weak function in common code for boards not requiring special handling. Taken from boards/freescale/common/mmc.c Related-to: ELB-2351 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-10config: apalis-imx8x: Enable fec txc delayPhilippe Schenker
Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit bad96834e65ae6364d8a9a8b3ba7756c61d6145c)
2020-03-10config: apalis-imx8: Enable FEC TXC delayPhilippe Schenker
Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit 3173b9aa17bc4c2580076376942a9ee1b6b8f636)
2020-03-10net: fec: Add possibility to enable TXC delayPhilippe Schenker
Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit f53846c29f76ccee0141f6902703bb6855b14b6a)
2020-03-10ARM64: dts: Remove RGMII RXC delay from MACPhilippe Schenker
Not needed as it is provided by the PHY. Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit a0ac1f6ca5d5eaf7b7b9833f5438c78ee11d9474)
2020-03-10board: verdin-imx8mm: Add KSZ9131 phy skew settingsPhilippe Schenker
This patch basically just enables both RXC and TXC delay lines in the PHY. This will compensate the missing delay from the MAC. Other skew settings are not needed as the traces on board are routed exactly the same length Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit 50e975e6ce4e4e88f8c5c943ef2ddc38b0a31997)
2020-03-10drivers: net: phy: micrel_ksz90x1.c: Add basic support for KSZ9131Philippe Schenker
This adds basic support for the new Micrel KSZ9131 phy. Related-to: ELB-1299 Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit cc96ed419f7585db15855dd53046562aadece3fb) (cherry picked from commit 150e6b7f6c9c8342997245be50f3bc58df78aaf3)
2020-03-10net: phy: micrel: Use defines for PHY_IDs and MASKPhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> (cherry picked from commit 28491c802d36accbb4d8562114ce8085ca53e1b0) (cherry picked from commit 9ee5759d22acc3406bca3b76cb24ed558b64d0df)
2020-03-05verdin-imx8mm.c: set eth phy skewMax Krummenacher
Set the Ethernet PHY's RGMII skew registers according to the needed skew. Related-to: ELB-1970 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05fsl-imx8mm-verdin.dts: fix eth phy power upMax Krummenacher
The PHY reset circuitry may keep the PHY in reset for up to 200ms after powerup. Use the regulator startup-delay-us property to wait that time before talking to the PHY. While at it unify that regulator with the Linux dts file. Related-to: ELB-1970 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05fsl-imx8mm-verdin.dts: remove fsl,rgmii_rxc_dly et. al.Max Krummenacher
The FEC in the i.MX8MM doesn't have this feature. So don't pretend one can use it. Additionally in the 2018.03 downstream U-Boot the property is not evaluated, not even for the i.MX8 and i.MX8X based machines. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05verdin-imx8: do not undef configs configured using KconfigMax Krummenacher
Do not undef CMD config defines which are set by Kconfig. This allows to enable those commands using Kconfig. (Taken from commit 26f0fb6c61e94f8ba52bcc0b4946d378e682ccff 'apalis-imx8: do not undef configs configured using Kconfig') Related-to: TOR-498 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05ARM: dts: apalis-imx8qm: update node fec1Philippe Schenker
It turned out that on the new Apalis iMX8 QuadPlus V1.1A the ethernet is no longer working. I suspect this due to missing muxing for 1.8V/3.3V. Due to that I copy the whole ethernet pinmux and node over from the Linux side. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05config: apalis-imx8: fix auto-negotiation timeout errorOleksandr Suvorov
Sometimes an ethernet PHY interface can’t complete auto-negotiation and returns “timeout” error. Overriding default timeout value fixes this issue. Related-to: #58999 Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
2020-03-05verdin-imx8mm: fix usb_1 device aka peripheral operationMarcel Ziswiler
With this e.g. fastboot or UMS work. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05verdin-imx8mm: lpddr4_timing.c: intial lpddr4 calibration dataMax Krummenacher
DDR calibration created with mscale_ddr_tool_v210_setup.exe using MX8M_Mini_LPDDR4_RPA_v14 Verdin iMX8MM V1.0.xlsx as of 1. Nov. 2019. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05board: toradex: add verdin imx8mm 2gb wb it v1.0a module supportMax Krummenacher
This commit adds initial support for the Toradex Verdin iMX8MM 2GB WB IT V1.0A module. They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports either booting from the on-module eMMC or may be used for recovery purpose using the universal update utility (uuu) aka mfgtools 3.0. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Gigabit Ethernet - GPIOs - I2C - USB_1 peripheral: fastboot or ums - USB_2 host: USB mass storage To prepare the program image for eMMC fastboot using imx-mkimage and subsequently flash it using U-Boot proceed as follows: cd imx-mkimage/ make SOC=iMX8MM flash_evk_emmc_fastboot load mmc 1:1 $loadaddr flash.bin setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 mmc dev 0 1 mmc write ${loadaddr} 0x2 ${blkcnt} To prepare the program image for use with USB recovery aka serial downloader using imx-mkimage and subsequently download using uuu with an uuu.auto script proceed as follows: cd imx-mkimage/ make SOC=iMX8MM flash_evk uuu_version 1.3.34 SDP: boot -f flash.bin CFG: SDPU: -vid 0x0525 -pid 0xb4a4 SDPU: delay 1000 SDPU: write -f flash.bin -offset 0x57c00 SDPU: jump Fusing i.MX 8MM SoC and configuring eMMC for fastboot (already done during manufacturing): fuse prog 1 3 0x100020d6 (BT_FUSE_SEL, eMMC boot, SD1, fast boot, 4-bit DDR, high speed, 1.8V) fuse prog 2 2 0x00000001 (enable boot ack) mmc bootbus 0 1 0 2 (4-bit, reset bus width, DDR) mmc partconf 0 1 1 0 (booting from boot area partition 1, send acknowledge) SD manufaccture boot: SD manufacture boot only works as long as the module is un-fused and SD_1_PWR_EN is bypassed on the carrier board. cd imx-mkimage/ make SOC=iMX8MM flash_evk sudo dd if=iMX8M/flash.bin of=/dev/mmcblk0 bs=1024 seek=33 Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05tdx-cfg-block: add verdin imx8mmMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05dt-bindings: pinctrl: imx8mm: add alternative uart muxingsMax Krummenacher
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05pins-imx8mm.h: add uart1 muxing on sai2 pinsMax Krummenacher
Copied from linux, branch nxp/imx_4.14.98_2.2.0 @ e6c2f6322962. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
2020-03-05imx8mm-evk, imx8mm-val: take changed sd/mmc spl boot order into accountMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05arm: mach-imx: hard-code emmc to mmc1 and sd to mmc2 for i.mx 8mmMarcel Ziswiler
Just like on any and all other i.MX 8 Series devices use MMC1 for eMMC and SD2 for SD card. This fixes previously reverted commit 6c6206ad1a5a ("MLK-18243-17: arm: mach-imx: fix sd to mmc1 and emmc to mmc2 for i.MX8MM"). Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05Revert "MLK-18243-17: arm: mach-imx: fix sd to mmc1 and emmc to mmc2 for ↵Marcel Ziswiler
i.MX8MM" Nope, hard-coding SD to mmc1 and eMMC to mmc2 is wrong in so many ways! This reverts commit 6c6206ad1a5a3c70118a3ecf526b0ff00088adf7.
2020-03-05net: dm: fec: Fix regulator enable when using DM_REGULATORAdam Ford
When DM_REGULATOR is enabled, the driver attempts to call regulator_autoset() which expects the regulators to be on at boot and/or always on and fails if they are not true. For a more generic approach, this patch just calls regulator_set_enable() which shouldn't have such restrictions. Fixes: ad8c43cbcafb ("net: dm: fec: Support the phy-supply binding") Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Acked-by: Joe Hershberger <joe.hershberger@ni.com> (cherry picked from commit 8f1a5ac797baac5b40f93eac80a7810f0a771ecf)
2020-03-05net: dm: fec: Support the phy-supply bindingMartin Fuzzey
Configure the phy regulator if defined by the "phy-supply" DT phandle. Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Acked-by: Joe Hershberger <joe.hershberger@ni.com> (cherry picked from commit ad8c43cbcafbbb21efc9e26bda7a6b1e37428adc)
2020-03-05tdx-cfg-block: fix while checking for uninitialised lenMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05tdx-cfg-block: fix colibri-imx8x defineMarcel Ziswiler
Fix CONFIG_TARGET_COLIBRI_IMX8QXP vs. CONFIG_TARGET_COLIBRI_IMX8X ifdefs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05apalis/colibri-imx8/8x: streamline hush shell promptsMarcel Ziswiler
Just like on any of our other modules also use the module type as hush shell prompt. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05apalis/colibri imx8/8x: unify kconfig descriptionsMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05apalis imx8: change kconfig spellingMarcel Ziswiler
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05config: apalis/colibri-imx8*: Add fdt_high variable without valuePhilippe Schenker
This will actually clear the value of a variable that is potentially still existing. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05ARM: dts: imx8qxp-apalis: Remove phy-reset-post-delayPhilippe Schenker
It was decided to get rid of the extra capacitor on the reset line so this is no longer needed Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05apalis-imx8/x/colibri-imx8qxp: skip resource checkingMarcel Ziswiler
Define CONFIG_SKIP_RESOURCE_CHECING which skips the downstream proprietary resource checking preventing us from booting any kind of mainline device tree based Linux kernels. While at it also fix some indentations/whitespaces. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2020-03-05apalis-imx8/x/colibri-imx8qxp: enable device tree overlay supportStefan Agner
Enable device tree overlay support which is used in the current dtconf implementation in TorizonCore. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2020-03-05configs: apalis/colibri-imx8: change bootdelay to one secondPhilippe Schenker
Use one second for the bootdelay like on all other toradex boards Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05include: apalis-imx8.h: change default devicetree filePhilippe Schenker
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05include: apalis-imx8.h: change tdxargs to defargs for pci_nomsiPhilippe Schenker
tdxargs are meant for temporary adjusting U-Boot. Use defargs that suits this purpose better. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
2020-03-05include: apalis-imx8.h: add default tdxargs pci=nomsiPhilippe Schenker
As we have issues with MSI enabled we will disable it in default environment. Issue: Kernel panic Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-23 22:53:50 +0000