summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2012-09-14ENGR00224291:i.MX6Q/ARM2-LPDDR2:enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu
2012-09-14ENGR00224272: MFG:i.mx6q/ARM2 enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu
2012-09-13ENGR00223788 mx6sl_evk: change boot args to boot from mmc/sdRobby Cai
2012-09-11ENGR00223027 Add support for nand on MFG for IMX6QAlejandro Sierra
2012-09-06ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang
2012-09-06ENGR00222170: Add mx6sl_evk_android_config for mx6sl evk boardLiGang
2012-08-31ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing
2012-08-31ENGR00221503-1 cmd_imxotp: refine the help of this command.Zhang Jiejing
2012-08-30ENGR00222005 mfgtool can't work on mx6slTony LIU
2012-08-29ENGR00219316-2: mx6q sabreauto enable lvds backlight by defaultAdrian Alonso
2012-08-29ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso
2012-08-28ENGR00221013 MX6 SabreSD:Disable LVDS panel CABC functionLiu Ying
2012-08-24ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv
2012-08-24ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCRRobby Cai
2012-08-22ENGR00221150 Support spi-nor on manufacturing toolAlejandro Sierra
2012-08-21ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board.Ryan QIAN
2012-08-21ENGR00180538-1 MFG download burn sd,spi, nand, nor failed.Francisco Munoz
2012-08-20ENGR00217505-8 uboot: MX6Q-ARD: set the default gpmi clock to 20MHzHuang Shijie
2012-08-20ENGR00217505-7 uboot: gpmi: update the mtd->ecc_stats when reading page failedHuang Shijie
2012-08-20ENGR00217505-6 uboot: gpmi: set default value for busy_timeoutHuang Shijie
2012-08-20ENGR00217505-5 uboot: gpmi: update the ecc_strength codeHuang Shijie
2012-08-20ENGR00217505-4 uboot: gpmi: replace the gpmi_nfc_reset_block()Huang Shijie
2012-08-20ENGR00217505-3 uboot: gpmi: use the community's nand chip databaseHuang Shijie
2012-08-20ENGR00217505-2 uboot: mtd: update nand_get_flash_type()Huang Shijie
2012-08-20ENGR00217505-1 uboot: MX6Q-ARD: add a NAND boot configHuang Shijie
2012-08-20ENGR00220486 Modify ODT values for Solo AIAlejandro Sierra
2012-08-14ENGR00220161: imx6sl: Add MX6SL EVK SupportRobby Cai
2012-08-13ENGR00220164 pfuze:rise VDDARM_IN to 1.425V and work around pfuze1.0Robin Gong
2012-08-10ENGR00220076 fix the fastboot usb re-connect issueLiGang
2012-08-09ENGR00219854-1 Enable fastboot feature on mx6q-arm2 boardLiGang
2012-08-07ENGR00219636 MX6 UBOOT : Enlarge command line buffer sizeEric Sun
2012-08-03ENGR00218915-2 MX6 SabreSD:Use new 8bit bmp boot logoLiu Ying
2012-08-03ENGR00218915-1 FSL common:Add new boot logoLiu Ying
2012-08-01ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun
2012-07-31ENGR00218583-5 MX6DL SabreSD Android:Add splashimage uboot varLiu Ying
2012-07-31ENGR00218583-4 MX6Q SabreSD Android:Add splashimage uboot varLiu Ying
2012-07-31ENGR00218583-3 MX6DL SabreSD:Enable splashimage by defaultLiu Ying
2012-07-31ENGR00218583-2 MX6Q SabreSD:Enable splashimage by defaultLiu Ying
2012-07-31ENGR00218583-1 MX6Q/DL SabreSD:Support LVDS1 splashimageLiu Ying
2012-07-30ENGR00218805 imx6: print the silicon revision correctlyJason Liu
2012-07-30ENGR00218465 Android: mx6sl-arm2: fix fastboot crash issueLiGang
2012-07-26ENGR00217401 common: fix build warningXinyu Chen
2012-07-25ENGR00218282 MX6Q: fix linker error when more configure enabled.Zhang Jiejing
2012-07-24ENGR00218067 mx6sl LDO_BYPASS: enable LDO BYPASS in mx6sl by defaultRobin Gong
2012-07-23ENGR00217764 MX6 Secure Boot : Fix NAND BOOT Failure due to secure patchEric Sun
2012-07-19ENGR00217381-02: show sd/mmc clk freq for mmcinfoRyan QIAN
2012-07-19ENGR00217381-01: mx6sl add sd1 and sd2 to support SD3.0Ryan QIAN
2012-07-13ENGR00217114-2 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-07-13ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun
2012-07-13ENGR00216852 MX6SL ARM2, UBoot : Apply V0.93 LPDDR2 ScriptEric Sun