diff options
Diffstat (limited to 'include/configs/colibri_vf.h')
-rw-r--r-- | include/configs/colibri_vf.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h new file mode 100644 index 0000000000..aa0841b8ed --- /dev/null +++ b/include/configs/colibri_vf.h @@ -0,0 +1,211 @@ +/* + * Copyright 2013 Toradex, Inc. + * + * Configuration settings for the Toradex VF61 module. + * + * Based on vf610twr.h: + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <config_cmd_default.h> + +#define CONFIG_VF610 + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* Enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG + +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_FSL_LPUART +#define LPUART_BASE UART0_BASE + +/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 + +/* NAND support */ +#define CONFIG_CMD_WRITEBCB +#define CONFIG_CMD_NAND +#define CONFIG_NAND_VF610_NFC +#define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_USE_ARCH_MEMCPY +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR + +/* Dynamic MTD partition support */ +#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define MTDIDS_DEFAULT "nand0=fsl_nfc" +#define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \ + "128k(vf-bcb)ro," \ + "1408k(u-boot)ro," \ + "512k(u-boot-env)ro," \ + "8m(kernel-ubi)," \ + "-(rootfs-ubi)" + +#undef CONFIG_CMD_IMLS + +#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 + +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET1_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +#define CONFIG_IPADDR 192.168.10.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.10.1 + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_BOARD_LATE_INIT + +#define CONFIG_LOADADDR 0x82000000 +#define CONFIG_SYS_TEXT_BASE 0x3f408000 + +#define DEFAULT_BOOTCOMMAND \ + "run ubiboot; run nfsboot" + +#define MMC_BOOTCMD \ + "run setup; " \ + "setenv bootargs ${defargs} ${mmcargs} ${mtdparts} ${setupargs}; " \ + "echo Booting from MMC/SD card...; " \ + "mmc part 0; fatload mmc 0:1 ${loadaddr} uImage && bootm" + +#define NFS_BOOTCMD \ + "run setup; " \ + "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} ${setupargs}; " \ + "echo Booting from NFS...; " \ + "dhcp && bootm" + +#define UBI_BOOTCMD \ + "run setup; " \ + "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} ${setupargs}; " \ + "echo Booting from NAND...; " \ + "ubi part kernel-ubi && ubi read ${loadaddr} kernel && bootm" + +#define CONFIG_BOOTCOMMAND DEFAULT_BOOTCOMMAND +#define CONFIG_NFSBOOTCOMMAND NFS_BOOTCMD + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "defargs=vmalloc=64M usb_high_speed=1\0" \ + "mmcargs=root=/dev/mmcblk0p2 rw rootwait\0" \ + "sdboot=" MMC_BOOTCMD "\0" \ + "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ + "setup=setenv setupargs " \ + "fec_mac=${ethaddr} no_console_suspend=1 console=tty1 console=ttymxc0" \ + ",${baudrate}n8 ${memargs}\0" \ + "setupdate=fatload mmc 0:1 ${loadaddr} flash_mmc.img && " \ + "source ${loadaddr}\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "ubiargs=ubi.mtd=rootfs-ubi root=ubi0:rootfs rootfstype=ubifs\0" \ + "ubiboot=" UBI_BOOTCMD "\0" \ + "" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Colibri VFxx # " +#undef CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80010000 +#define CONFIG_SYS_MEMTEST_END 0x87C00000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 +#define CONFIG_CMDLINE_EDITING + +/* + * Stack sizes + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* Physical memory map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM (0x80000000) +#define PHYS_SDRAM_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment organization */ +#define CONFIG_SYS_NO_FLASH + +#ifdef CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (12 * 64 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) +#endif + +#ifdef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE (64 * 2048) +#define CONFIG_ENV_SECT_SIZE (64 * 2048) +#define CONFIG_ENV_OFFSET (12 * 64 * 2048) +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_SYS_NO_FLASH + +#endif |