diff options
Diffstat (limited to 'include/configs/colibri_t20_sdboot.h')
| -rw-r--r-- | include/configs/colibri_t20_sdboot.h | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/include/configs/colibri_t20_sdboot.h b/include/configs/colibri_t20_sdboot.h index a23d1a6823..588419a5f9 100644 --- a/include/configs/colibri_t20_sdboot.h +++ b/include/configs/colibri_t20_sdboot.h @@ -34,17 +34,16 @@ SD-BOOT The sd sector numbers are used as follows: u-boot needs to find ENV and LNX to get to the environment and the kernel, the kernel needs to find the APP partition for the rootfs. ENV: colibri_t20_sdboot.h -Set CONFIG_ENV_MMC_OFFSET to the byte start address of ENV, take the sector address of Partid 6 (which is in 2024 byte sectors) +Set CONFIG_ENV_MMC_OFFSET to the byte start address of ENV, take the sector address of Partid 6 (which is in 2048 byte sectors) LNX: colibri_t20.h -Set the u-boot environment SDBOOTCMD below, mmc read RAMloadaddr, 512byte sector start, 512byte copy length -take the sector address of Partid 7 (which is in 2024 byte sectors) +Set the u-boot environment SDBOOTCMD below, mmc read RAMloadaddr, 512byte sector start, 512byte copy length. +Take the sector address of Partid 7 (which is in 2048 byte sectors). APP: colibri_t20.h Set the u-boot environment sdargs and the variable GPT_PRIMARY_PARTITION_TABLE_LBA below. The kernel finds the partition with the help of the GP1/GPT partitions. The kernel commandline must include "gpt gpt_sector=xxx" to force it to use GUID Partition Table (GPT) and to give the 512byte sector start address of the primary GUID. -Set this in Take the start address of Partid 8 (which is in 2048 byte sectors). add 1 to the resulting 512byte block. (at pos. 0 is the MBR) E.g. Output during nvflash procedure on serial console: @@ -53,12 +52,12 @@ SD Alloc Partid=3, start sector=1536,num=64 SD Alloc Partid=4, start sector=1600,num=960 SD Alloc Partid=5, start sector=2560,num=64 SD Alloc Partid=6, start sector=2624,num=64 -SD Alloc Partid=7, start sector=2688,num=2048 -SD Alloc Partid=8, start sector=4736,num=512 -SD Alloc Partid=9, start sector=5248,num=500032 -SD Alloc Partid=10, start sector=505280,num=460352 +SD Alloc Partid=7, start sector=2688,num=4096 +SD Alloc Partid=8, start sector=6784,num=512 +SD Alloc Partid=9, start sector=7296,num=3879808 +SD Alloc Partid=11, start sector=3887104,num=0 -sector start address 4736 * 2048 -> 18944 * 512 -> GPT start sector is 18945. +sector start address 6784 * 2048 -> 27137 * 512 -> GPT start sector is 27137. */ @@ -87,7 +86,8 @@ sector start address 4736 * 2048 -> 18944 * 512 -> GPT start sector is 18945. #if defined(CONFIG_ENV_IS_IN_MMC) #define CONFIG_SYS_MMC_ENV_DEV 0 /* use MMC0, slot on eval board and Iris */ -#define CONFIG_ENV_MMC_OFFSET (10496 * 512) /* Byteaddress of the beginning of the ENV partition */ +/* once the eMMC is detected the corresponding setting is taken */ +#define CONFIG_ENV_MMC_OFFSET (gd->env_offset * 512) #endif #endif /* __CONFIG_H */ |