diff options
Diffstat (limited to 'include/configs/apalis-imx8x.h')
| -rw-r--r-- | include/configs/apalis-imx8x.h | 199 |
1 files changed, 0 insertions, 199 deletions
diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h deleted file mode 100644 index 6fad7a1fa1..0000000000 --- a/include/configs/apalis-imx8x.h +++ /dev/null @@ -1,199 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2019 Toradex - */ - -#ifndef __APALIS_IMX8X_H -#define __APALIS_IMX8X_H - -#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> - -#define CONFIG_REMAKE_ELF - -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define USDHC1_BASE_ADDR 0x5B010000 -#define USDHC2_BASE_ADDR 0x5B020000 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -#define CONFIG_SKIP_RESOURCE_CHECKING - -/* Networking */ -#define FEC_QUIRK_ENET_MAC - -#define CONFIG_TFTP_TSIZE - -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 -#define CONFIG_ROOTPATH "/srv/nfs" - -#define FEC_ENET_ENABLE_TXC_DELAY - -/** - * SYS_SDRAM_BASE 0x80000000 0.125MiB - * SYS_TEXT_BASE 0x80020000 2.375MiB - * kernel_addr_r 0x80280000 45.5MiB - * fdt_addr_r 0x83000000 1MiB - * scriptaddr 0x83100000 15MiB - * __RESERVED__ 0x84000000 48MiB - * loadaddr 0x87000000 48MiB - * ramdisk_addr_r 0x8a000000 288MiB - * SYS_MEMTEST_START 0x90000000 - * SYS_MEMTEST_END 0xC0000000 - */ -#define MEM_LAYOUT_ENV_SETTINGS \ - "kernel_addr_r=0x80280000\0" \ - "fdt_addr_r=0x83100000\0" \ - "ramdisk_addr_r=0x8a000000\0" \ - "scriptaddr=0x83200000\0" - -#ifdef CONFIG_AHAB_BOOT -#define AHAB_ENV "sec_boot=yes\0" -#else -#define AHAB_ENV "sec_boot=no\0" -#endif - -/* Boot M4 */ -#define M4_BOOT_ENV \ - "m4_0_image=m4_0.bin\0" \ - "loadm4image_0=${load_cmd} ${loadaddr} " \ - "${m4_0_image}\0" \ - "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 1) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define FDT_FILE "imx8qxp-apalis-eval.dtb" - -#include <config_distro_bootcmd.h> - -#if defined(CONFIG_TDX_EASY_INSTALLER) -# define BOOT_SCRIPT "boot-tezi.scr" -#else -# define BOOT_SCRIPT "boot.scr" -#endif - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - BOOTENV \ - AHAB_ENV \ - M4_BOOT_ENV \ - MEM_LAYOUT_ENV_SETTINGS \ - "bootcmd_mfg=fastboot 0\0" \ - "boot_scripts=" BOOT_SCRIPT "\0" \ - "boot_script_dhcp=" BOOT_SCRIPT "\0" \ - "boot_file=Image\0" \ - "console=ttyLP1,115200\0" \ - "fdt_addr=0x83000000\0" \ - "fdtfile=" FDT_FILE "\0" \ - "fdt_high=\0" \ - "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ - "image=Image\0" \ - "initrd_addr=0x83800000\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=PARTUUID=${uuid} rootwait " \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "panel=NULL\0" \ - "setup=run mmcargs\0" \ - "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \ - "if test \"$confirm\" = \"y\"; then " \ - "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ - "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \ - "${blkcnt}; fi\0" \ - "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" - -/* Link Definitions */ -#define CONFIG_LOADADDR 0x89000000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - -#define CONFIG_SYS_MEMTEST_START 0x90000000 -#define CONFIG_SYS_MEMTEST_END 0xc0000000 - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -/* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 eMMC */ -#define CONFIG_SYS_MMC_ENV_PART 1 - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_2 0x880000000 -#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */ - -/* Serial */ -#define CONFIG_BAUDRATE 115200 - -/* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE SZ_2K -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY 8000000 /* 8MHz */ - -/* USB Config */ -#define CONFIG_USBD_HS - -#define CONFIG_CMD_USB_MASS_STORAGE -#define CONFIG_USB_GADGET_MASS_STORAGE -#define CONFIG_USB_FUNCTION_MASS_STORAGE - -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -/* USB OTG controller configs */ -#ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#endif - -/* Networking */ -#define CONFIG_FEC_ENET_DEV 0 - -#define IMX_FEC_BASE 0x5B040000 -#define CONFIG_FEC_MXC_PHYADDR 0x4 -#define CONFIG_ETHPRIME "eth0" - -#define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC -#define PHY_ANEG_TIMEOUT 20000 - -#ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_CMD_BMP -#define CONFIG_BMP_16BPP -#define CONFIG_BMP_24BPP -#define CONFIG_BMP_32BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#endif - -#endif /* __APALIS_IMX8X_H */ |