diff options
Diffstat (limited to 'include/configs/apalis-imx8.h')
| -rw-r--r-- | include/configs/apalis-imx8.h | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h new file mode 100644 index 0000000000..da5bd85d26 --- /dev/null +++ b/include/configs/apalis-imx8.h @@ -0,0 +1,314 @@ +/* + * Copyright 2017 NXP + * Copyright 2017 Toradex + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __APALIS_IMX8QM_H +#define __APALIS_IMX8QM_H + +#include <linux/sizes.h> +#include <asm/arch/imx-regs.h> + +#define CONFIG_REMAKE_ELF + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_ARCH_MISC_INIT + +/* Flat Device Tree Definitions */ +#define CONFIG_OF_BOARD_SETUP + +#undef CONFIG_CMD_EXPORTENV +#undef CONFIG_CMD_IMPORTENV +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_CRC32 +#undef CONFIG_BOOTM_NETBSD + +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define USDHC1_BASE_ADDR 0x5B010000 +#define USDHC2_BASE_ADDR 0x5B020000 +#define USDHC3_BASE_ADDR 0x5B030000 +#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_SCSI +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_CMD_SCSI +#define CONFIG_LIBATA +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) +#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_SATA_IMX + +#define CONFIG_FSL_HSIO +#define CONFIG_PCIE_IMX8X +#define CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +/* FUSE command */ +#define CONFIG_CMD_FUSE + +/* GPIO configs */ +#define CONFIG_MXC_GPIO + +/* ENET Config */ +#define CONFIG_MII + +#define CONFIG_FEC_MXC +#define CONFIG_FEC_XCV_TYPE RGMII +#define FEC_QUIRK_ENET_MAC + +#define CONFIG_PHY_GIGE /* Support for 1000BASE-X */ +#define CONFIG_PHYLIB +#define CONFIG_PHY_ATHEROS + +/* ENET0 connects AR8031 on CPU board, ENET1 connects to base board */ +#define CONFIG_FEC_ENET_DEV 0 + +#if (CONFIG_FEC_ENET_DEV == 0) +#define IMX_FEC_BASE 0x5B040000 +#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CONFIG_ETHPRIME "eth0" +#elif (CONFIG_FEC_ENET_DEV == 1) +#define IMX_FEC_BASE 0x5B050000 +#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CONFIG_FEC_ENABLE_MAX7322 +#define CONFIG_ETHPRIME "eth1" +#endif + +/* ENET0 MDIO are shared */ +#define CONFIG_FEC_MXC_MDIO_BASE 0x5B040000 + +/* MAX7322 */ +#ifdef CONFIG_FEC_ENABLE_MAX7322 +#define CONFIG_MAX7322_I2C_ADDR 0x68 +#define CONFIG_MAX7322_I2C_BUS 2 /* I2C2 */ +#endif + +/* Boot M4 */ +#define M4_BOOT_ENV \ + "m4_0_image=m4_0.bin\0" \ + "m4_1_image=m4_1.bin\0" \ + "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \ + "loadm4image_1=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_1_image}\0" \ + "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ + "m4boot_1=run loadm4image_1; dcache flush; bootaux ${loadaddr} 1\0" \ + +#ifdef CONFIG_NAND_BOOT +#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs) " +#else +#define MFG_NAND_PARTITION "" +#endif + +#define CONFIG_MFG_ENV_SETTINGS \ + "mfgtool_args=setenv bootargs console=${console},${baudrate} " \ + "rdinit=/linuxrc " \ + "g_mass_storage.stall=0 g_mass_storage.removable=1 " \ + "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\ + "g_mass_storage.iSerialNumber=\"\" "\ + MFG_NAND_PARTITION \ + "video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off " \ + "clk_ignore_unused "\ + "\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffff\0" \ + "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \ + +/* Initial environment variables */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_MFG_ENV_SETTINGS \ + M4_BOOT_ENV \ + "script=boot.scr\0" \ + "image=Image\0" \ + "panel=NULL\0" \ + "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200\0" \ + "fdt_addr=0x83000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "boot_fdt=try\0" \ + "fdt_file=fsl-imx8qm-lpddr4-arm2.dtb\0" \ + "initrd_addr=0x83800000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "mmcautodetect=yes\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} " \ + "video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "echo wait for boot; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ + "video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${loadaddr} ${image}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "booti ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "else " \ + "booti; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loadimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else booti ${loadaddr} - ${fdt_addr}; fi" + +/* Link Definitions */ +#define CONFIG_LOADADDR 0x80280000 +#define CONFIG_SYS_TEXT_BASE 0x80020000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 + + +/* Default environment is in SD */ +#define CONFIG_ENV_SIZE 0x1000 + +#define CONFIG_ENV_OFFSET (64 * SZ_64K) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ + +#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 + +/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board, USDHC3 is for SD on base board + * On DDR4 board, USDHC1 is mux for NAND, USDHC2 is for SD, USDHC3 is for SD on base board + */ +#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ +#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ +#define CONFIG_SYS_FSL_USDHC_NUM 3 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32*1024)) * 1024) + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_NR_DRAM_BANKS 3 +#define PHYS_SDRAM_1 0x80000000 +#define PHYS_SDRAM_2 0x880000000 +#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ +#define PHYS_SDRAM_2_SIZE 0x80000000 /* 2 GB */ + +/* Serial */ +#define CONFIG_BAUDRATE 115200 + +/* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_CMDLINE_EDITING + +/* Generic Timer Definitions */ +#define COUNTER_FREQUENCY 8000000 /* 8MHz */ + +#ifndef CONFIG_DM_PCA953X +#define CONFIG_PCA953X +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#endif + +#define CONFIG_IMX_SMMU + +/* MT35XU512ABA1G12 has only one Die, so QSPI0 B won't work */ +#ifdef CONFIG_FSL_FSPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 40000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define FSL_FSPI_FLASH_SIZE SZ_64M +#define FSL_FSPI_FLASH_NUM 1 +#define FSPI0_BASE_ADDR 0x5d120000 +#define FSPI0_AMBA_BASE 0 +#define CONFIG_SYS_FSL_FSPI_AHB +#endif + +/* USB Config */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +/* USB 3.0 controller configs */ +#ifdef CONFIG_USB_XHCI_IMX8 +#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 +#endif + +/* USB OTG controller configs */ +#ifdef CONFIG_USB_EHCI_HCD +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#endif +#endif /* CONFIG_CMD_USB */ + +#ifdef CONFIG_USB_GADGET +#define CONFIG_USBD_HS +#define CONFIG_USB_FUNCTION_MASS_STORAGE +#endif + +#if defined(CONFIG_ANDROID_SUPPORT) +#include "imx8qm_arm2_android.h" +#endif + +/* Framebuffer */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_IMXDPUV1 +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IMX_VIDEO_SKIP +#endif + +#define CONFIG_OF_SYSTEM_SETUP +#define BOOTAUX_RESERVED_MEM_BASE 0x88000000 +#define BOOTAUX_RESERVED_MEM_SIZE 0x08000000 /* Reserve from second 128MB */ + +#endif /* __APALIS_IMX8QM_H */ |