diff options
Diffstat (limited to 'drivers/ddr/imx8m/lpddr4_init.c')
| -rw-r--r-- | drivers/ddr/imx8m/lpddr4_init.c | 189 |
1 files changed, 0 insertions, 189 deletions
diff --git a/drivers/ddr/imx8m/lpddr4_init.c b/drivers/ddr/imx8m/lpddr4_init.c deleted file mode 100644 index d6422b9b0a..0000000000 --- a/drivers/ddr/imx8m/lpddr4_init.c +++ /dev/null @@ -1,189 +0,0 @@ -/* -* Copyright 2018 NXP -* -* SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <common.h> -#include <errno.h> -#include <asm/io.h> -#include <asm/arch/ddr.h> -#include <asm/arch/clock.h> -#include <asm/arch/imx8m_ddr.h> -#include <asm/arch/lpddr4_define.h> -#include <asm/arch/sys_proto.h> - -void lpddr4_cfg_umctl2(struct dram_cfg_param *ddrc_cfg, int num) -{ - int i = 0; - - for (i = 0; i < num; i++) { - reg32_write(ddrc_cfg->reg, ddrc_cfg->val); - ddrc_cfg++; - } -} - -void ddr_init(struct dram_timing_info *dram_timing) -{ - unsigned int tmp; - - printf("DDRINFO: start lpddr4 ddr init\n"); - /* step 1: reset */ - if (is_imx8mq()) { - reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F00000F); - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F); - reg32_write(SRC_DDRC_RCR_ADDR + 0x04, 0x8F000000); - } else { - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00001F); - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F00000F); - } - - mdelay(100); - - debug("DDRINFO: reset done\n"); - /* change the clock source of dram_apb_clk_root: source 4 800MHz /4 = 200MHz */ - clock_set_target_val(DRAM_APB_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(4) | - CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV4)); - - /* disable iso */ - reg32_write(0x303A00EC, 0x0000ffff); /* PGC_CPU_MAPPING */ - reg32setbit(0x303A00F8, 5); /* PU_PGC_SW_PUP_REQ */ - - debug("DDRINFO: cfg clk\n"); - if (is_imx8mq()) - dram_pll_init(DRAM_PLL_OUT_800M); - else - dram_pll_init(DRAM_PLL_OUT_750M); - - /* - * release [0]ddr1_preset_n, [1]ddr1_core_reset_n, - * [2]ddr1_phy_reset, [3]ddr1_phy_pwrokin_n - */ - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000006); - - /*step2 Configure uMCTL2's registers */ - debug("DDRINFO: ddrc config start\n"); - lpddr4_cfg_umctl2(dram_timing->ddrc_cfg, dram_timing->ddrc_cfg_num); - debug("DDRINFO: ddrc config done\n"); - - /* - * step3 de-assert all reset - * RESET: <core_ddrc_rstn> DEASSERTED - * RESET: <aresetn> for Port 0 DEASSERT(0)ED - */ - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000004); - reg32_write(SRC_DDRC_RCR_ADDR, 0x8F000000); - - reg32_write(DDRC_DBG1(0), 0x00000000); - /* step4 */ - /* [0]dis_auto_refresh=1 */ - reg32_write(DDRC_RFSHCTL3(0), 0x00000011); - - /* [8]--1: lpddr4_sr allowed; [5]--1: software entry to SR */ - reg32_write(DDRC_PWRCTL(0), 0x000000a8); - - do { - tmp = reg32_read(DDRC_STAT(0)); - } while ((tmp & 0x33f) != 0x223); - - reg32_write(DDRC_DDR_SS_GPR0, 0x01); /* LPDDR4 mode */ - - /* step5 */ - reg32_write(DDRC_SWCTL(0), 0x00000000); - - /* step6 */ - tmp = reg32_read(DDRC_MSTR2(0)); - if (tmp == 0x2) { - reg32_write(DDRC_DFIMISC(0), 0x00000210); - } else if (tmp == 0x1) { - reg32_write(DDRC_DFIMISC(0), 0x00000110); - } else { - reg32_write(DDRC_DFIMISC(0), 0x00000010); - } - - /* step7 [0]--1: disable quasi-dynamic programming */ - reg32_write(DDRC_SWCTL(0), 0x00000001); - - /* step8 Configure LPDDR4 PHY's registers */ - debug("DDRINFO:ddrphy config start\n"); - ddr_cfg_phy(dram_timing); - debug("DDRINFO: ddrphy config done\n"); - - /* - * step14 CalBusy.0 =1, indicates the calibrator is actively - * calibrating. Wait Calibrating done. - */ - do { - tmp = reg32_read(DDRPHY_CalBusy(0)); - } while ((tmp & 0x1)); - - printf("DDRINFO:ddrphy calibration done\n"); - - /* step15 [0]--0: to enable quasi-dynamic programming */ - reg32_write(DDRC_SWCTL(0), 0x00000000); - - /* step16 */ - tmp = reg32_read(DDRC_MSTR2(0)); - if (tmp == 0x2) { - reg32_write(DDRC_DFIMISC(0), 0x00000230); - } else if (tmp == 0x1) { - reg32_write(DDRC_DFIMISC(0), 0x00000130); - } else { - reg32_write(DDRC_DFIMISC(0), 0x00000030); - } - - /* step17 [0]--1: disable quasi-dynamic programming */ - reg32_write(DDRC_SWCTL(0), 0x00000001); - /* step18 wait DFISTAT.dfi_init_complete to 1 */ - do { - tmp = reg32_read(DDRC_DFISTAT(0)); - } while ((tmp & 0x1) == 0x0); - - /* step19 */ - reg32_write(DDRC_SWCTL(0), 0x00000000); - - /* step20~22 */ - tmp = reg32_read(DDRC_MSTR2(0)); - if (tmp == 0x2) { - reg32_write(DDRC_DFIMISC(0), 0x00000210); - /* set DFIMISC.dfi_init_complete_en again */ - reg32_write(DDRC_DFIMISC(0), 0x00000211); - } else if (tmp == 0x1) { - reg32_write(DDRC_DFIMISC(0), 0x00000110); - /* set DFIMISC.dfi_init_complete_en again */ - reg32_write(DDRC_DFIMISC(0), 0x00000111); - } else { - /* clear DFIMISC.dfi_init_complete_en */ - reg32_write(DDRC_DFIMISC(0), 0x00000010); - /* set DFIMISC.dfi_init_complete_en again */ - reg32_write(DDRC_DFIMISC(0), 0x00000011); - } - - /* step23 [5]selfref_sw=0; */ - reg32_write(DDRC_PWRCTL(0), 0x00000008); - /* step24 sw_done=1 */ - reg32_write(DDRC_SWCTL(0), 0x00000001); - - /* step25 wait SWSTAT.sw_done_ack to 1 */ - do { - tmp = reg32_read(DDRC_SWSTAT(0)); - } while ((tmp & 0x1) == 0x0); - -#ifdef DFI_BUG_WR - reg32_write(DDRC_DFIPHYMSTR(0), 0x00000001); -#endif - /* wait STAT.operating_mode([1:0] for ddr3) to normal state */ - do { - tmp = reg32_read(DDRC_STAT(0)); - } while ((tmp & 0x3) != 0x1); - - /* step26 */ - reg32_write(DDRC_RFSHCTL3(0), 0x00000010); - - /* enable port 0 */ - reg32_write(DDRC_PCTRL_0(0), 0x00000001); - printf("DDRINFO: ddrmix config done\n"); - - /* save the dram timing config into memory */ - dram_config_save(dram_timing, CONFIG_SAVED_DRAM_TIMING_BASE); -} |