1 files changed, 41 insertions, 41 deletions

diff --git a/board/toradex/colibri_imx6/pf0100.c b/board/toradex/colibri_imx6/pf0100.c
index 618c571805..5fb7e45210 100644
--- a/board/toradex/colibri_imx6/pf0100.c
+++ b/board/toradex/colibri_imx6/pf0100.c
@@ -34,7 +34,7 @@ unsigned pmic_init(void)
 	uchar bus = 1;
 	uchar devid, revid, val;
 
-	puts("PMIC: ");
+	puts("PMIC:  ");
 	if (!((0 == i2c_set_bus_num(bus)) &&
 	      (0 == i2c_probe(PFUZE100_I2C_ADDR)))) {
 		puts("i2c bus failed\n");
@@ -49,7 +49,46 @@ unsigned pmic_init(void)
 		puts("i2c pmic revid read failed\n");
 		return 0;
 	}
-	printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+	printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid);
+
+	/* get device programmed state */
+	val = PFUZE100_PAGE_REGISTER_PAGE1;
+	if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
+		puts("i2c write failed\n");
+		return 0;
+	}
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return 0;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
+		puts("i2c fuse_por read failed\n");
+		return programmed;
+	}
+	if (val & PFUZE100_FUSE_POR_M)
+		programmed++;
+
+	switch (programmed) {
+	case 0:
+		puts("not programmed\n");
+		break;
+	case 3:
+		puts("programmed\n");
+		break;
+	default:
+		puts("undefined programming state\n");
+		break;
+	}
 
 #ifdef DEBUG
 	{
@@ -102,45 +141,6 @@ unsigned pmic_init(void)
 		printf("\n");
 	}
 #endif
-	/* get device programmed state */
-	val = PFUZE100_PAGE_REGISTER_PAGE1;
-	if (i2c_write(PFUZE100_I2C_ADDR, PFUZE100_PAGE_REGISTER, 1, &val, 1)) {
-		puts("i2c write failed\n");
-		return 0;
-	}
-	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR1, 1, &val, 1) < 0) {
-		puts("i2c fuse_por read failed\n");
-		return 0;
-	}
-	if (val & PFUZE100_FUSE_POR_M)
-		programmed++;
-
-	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR2, 1, &val, 1) < 0) {
-		puts("i2c fuse_por read failed\n");
-		return programmed;
-	}
-	if (val & PFUZE100_FUSE_POR_M)
-		programmed++;
-
-	if (i2c_read(PFUZE100_I2C_ADDR, PFUZE100_FUSE_POR3, 1, &val, 1) < 0) {
-		puts("i2c fuse_por read failed\n");
-		return programmed;
-	}
-	if (val & PFUZE100_FUSE_POR_M)
-		programmed++;
-
-	switch (programmed) {
-	case 0:
-		printf("PMIC: not programmed\n");
-		break;
-	case 3:
-		printf("PMIC: programmed\n");
-		break;
-	default:
-		printf("PMIC: undefined programming state\n");
-		break;
-	}
-
 	return programmed;
 }