diff options
Diffstat (limited to 'board/toradex/apalis_t30/apalis_t30.dts')
-rw-r--r-- | board/toradex/apalis_t30/apalis_t30.dts | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/board/toradex/apalis_t30/apalis_t30.dts b/board/toradex/apalis_t30/apalis_t30.dts new file mode 100644 index 0000000000..4004e494c8 --- /dev/null +++ b/board/toradex/apalis_t30/apalis_t30.dts @@ -0,0 +1,152 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "../../nvidia/cardhu/tegra30.dtsi" + +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + config { + machine-arch-id = <4513>; + }; + + aliases { + console = "/serial@70006000"; + usb0 = "/usb@0x7d000000"; + usb1 = "/usb@0x7d004000"; + usb2 = "/usb@0x7d008000"; + + sdmmc0 = "/sdhci@78000600"; + sdmmc1 = "/sdhci@78000400"; + sdmmc2 = "/sdhci@78000000"; + + i2c0 = "/i2c@0x7000d000"; + i2c1 = "/i2c@0x7000c000"; + i2c2 = "/i2c@0x7000c400"; + i2c3 = "/i2c@0x7000c500"; + i2c4 = "/i2c@0x7000c700"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + serial@70006000 { + status = "ok"; + /* + * TBD - use CONFIG_SYS_PLLP_BASE_IS_408MHZ somehow here. + * Currently I put this back to 216MHz in fdt_decode.c + */ + clock-frequency = <408000000>; + }; + + /* SD - SDMMC1 */ + sdhci@78000000 { + status = "ok"; + width = <4>; /* width of SDIO port */ + removable = <1>; + /* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */ + cd-gpio = <&gpio 229 0>; /* card detect, gpio PCC5, SD1_CD_N */ + }; + + /* MMC - SDMMC3 */ +//8-bit support broken + sdhci@78000400 { + status = "ok"; + width = <4>; /* width of SDIO port */ + removable = <1>; + /* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */ + cd-gpio = <&gpio 171 0>; /* card detect, gpio PV3, MMC1_CD_N */ + }; + + /* Internal eMMC - SDMMC4 */ +//8-bit support broken + emmc: sdhci@78000600 { + status = "ok"; + width = <4>; /* width of SDIO port */ + removable = <0>; + }; + + lcd { + compatible = "nvidia,tegra2-lcd"; + width = <640>; + height = <480>; + bits_per_pixel = <16>; + pwfm = <&pwfm0>; + display = <&display1>; + /* frame-buffer location = top of memory - carveout - fb */ + frame-buffer = <0xbfb00000>; + + pixel_clock = <25175000>; + + /* Timing: ref_to_sync, sync_width, back_porch, front_porch */ + horiz_timing = <0 96 48 16>; + vert_timing = <1 2 31 11>; + + /* 800x480@60 (e.g. EDT ET070080DH6) + pixel_clock = <32460000>; + width = <800>; + height = <480>; + horiz_timing = <1 64 128 64>; + vert_timing = <1 3 22 20>; + */ + + /* 1024x768 timings + pixel_clock = <72000000>; + width = <1024>; + height = <768>; + horiz_timing = <0 136 160 24>; + vert_timing = <1 6 29 3>; + */ + + /* Parameter 3 bit 0:1=output, 0=input; bit 1:1=high, 0=low */ + backlight-enable = <&gpio 170 1>; /* PV2 - SODIMM 71: BL_ON */ + backlight-vdd = <&gpio 255 1>; + lvds-shutdown = <&gpio 255 1>; + panel-vdd = <&gpio 255 1>; + + /* + * Panel required timings + * Timing 1: delay between panel_vdd-rise and data-rise + * Timing 2: delay between data-rise and backlight_vdd-rise + * Timing 3: delay between backlight_vdd and pwm-rise + * Timing 4: delay between pwm-rise and backlight_en-rise + */ + panel-timings = <0 0 0 0>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ +//currently broken + usb@0x7d000000 { + status = "ok"; + host-mode = <1>; + vbus-gpio = <&gpio 157 3>; /* PT5, USBO1_EN */ + }; + + usbphya: usbphy@0 { + compatible = "smsc,usb3315"; + status = "ok"; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@0x7d004000 { + status = "ok"; + utmi = <&usbphya>; + host-mode = <0>; + vbus-gpio = <&gpio 233 3>; /* PDD1, USBH_EN */ + }; + + usbphyb: usbphy@0 { + compatible = "smsc,usb3315"; + status = "ok"; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@0x7d008000 { + status = "ok"; + utmi = <&usbphyb>; + host-mode = <0>; + }; +}; |