summaryrefslogtreecommitdiff
path: root/board/eric/init.S
diff options
context:
space:
mode:
Diffstat (limited to 'board/eric/init.S')
-rw-r--r--board/eric/init.S355
1 files changed, 355 insertions, 0 deletions
diff --git a/board/eric/init.S b/board/eric/init.S
new file mode 100644
index 0000000000..bdf90a5f25
--- /dev/null
+++ b/board/eric/init.S
@@ -0,0 +1,355 @@
+/*------------------------------------------------------------------------------+ */
+/* */
+/* This source code has been made available to you by IBM on an AS-IS */
+/* basis. Anyone receiving this source is licensed under IBM */
+/* copyrights to use it in any way he or she deems fit, including */
+/* copying it, modifying it, compiling it, and redistributing it either */
+/* with or without modifications. No license under IBM patents or */
+/* patent applications is to be implied by the copyright license. */
+/* */
+/* Any user of this software should understand that IBM cannot provide */
+/* technical support for this software and will not be responsible for */
+/* any consequences resulting from the use of this software. */
+/* */
+/* Any person who transfers this source code or any derivative work */
+/* must include the IBM copyright notice, this paragraph, and the */
+/* preceding two paragraphs in the transferred software. */
+/* */
+/* COPYRIGHT I B M CORPORATION 1995 */
+/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/*----------------------------------------------------------------------------- */
+/* Function: ext_bus_cntlr_init */
+/* Description: Initializes the External Bus Controller for the external */
+/* peripherals. IMPORTANT: For pass1 this code must run from */
+/* cache since you can not reliably change a peripheral banks */
+/* timing register (pbxap) while running code from that bank. */
+/* For ex., since we are running from ROM on bank 0, we can NOT */
+/* execute the code that modifies bank 0 timings from ROM, so */
+/* we run it from cache. */
+/* */
+/*----------------------------------------------------------------------------- */
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+
+ .globl ext_bus_cntlr_init
+ext_bus_cntlr_init:
+ mflr r4 /* save link register */
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+ mtlr r4 /* restore link register */
+ addi r4,0,14 /* set ctr to 10; used to prefetch */
+ mtctr r4 /* 10 cache lines to fit this function */
+ /* in cache (gives us 8x10=80 instrctns) */
+..ebcloop:
+ icbt r0,r3 /* prefetch cache line for addr in r3 */
+ addi r3,r3,32 /* move to next cache line */
+ bdnz ..ebcloop /* continue for 10 cache lines */
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure all accesses to ROM are complete before changing */
+ /* bank 0 timings. 200usec should be enough. */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 0 (Flash) initialization (from openbios) */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb0ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS0_AP@h
+ ori r4,r4,CS0_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb0cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS0_CR@h
+ ori r4,r4,CS0_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 1 (NVRAM/RTC) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb1ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS1_AP@h
+ ori r4,r4,CS1_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb1cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS1_CR@h
+ ori r4,r4,CS1_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 2 (A/D converter) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb2ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS2_AP@h
+ ori r4,r4,CS2_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb2cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS2_CR@h
+ ori r4,r4,CS2_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 3 (Ethernet PHY Reset) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb3ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS3_AP@h
+ ori r4,r4,CS3_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb3cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS3_CR@h
+ ori r4,r4,CS3_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb4ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS4_AP@h
+ ori r4,r4,CS4_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb4cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS4_CR@h
+ ori r4,r4,CS4_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb5ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS5_AP@h
+ ori r4,r4,CS5_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb5cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS5_CR@h
+ ori r4,r4,CS5_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 6 (CPU LED0) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb6ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS6_AP@h
+ ori r4,r4,CS6_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb6cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS6_CR@h
+ ori r4,r4,CS5_CR@l
+ mtdcr ebccfgd,r4
+
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank 7 (CPU LED1) initialization */
+ /*----------------------------------------------------------------------- */
+
+ addi r4,0,pb7ap
+ mtdcr ebccfga,r4
+ addis r4,0,CS7_AP@h
+ ori r4,r4,CS7_AP@l
+ mtdcr ebccfgd,r4
+
+ addi r4,0,pb7cr
+ mtdcr ebccfga,r4
+ addis r4,0,CS7_CR@h
+ ori r4,r4,CS7_CR@l
+ mtdcr ebccfgd,r4
+
+/* addis r4,r0,FPGA_BRDC@h */
+/* ori r4,r4,FPGA_BRDC@l */
+/* lbz r3,0(r4) //get FPGA board control reg */
+/* eieio */
+/* ori r3,r3,0x01 //set UART1 control to select CTS/RTS */
+/* stb r3,0(r4) */
+
+ nop /* pass2 DCR errata #8 */
+ blr
+
+/*----------------------------------------------------------------------------- */
+/* Function: sdram_init */
+/* Description: Configures SDRAM memory banks on ERIC. */
+/* We do manually init our SDRAM. */
+/* If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */
+/* It is assumed that a 32MB 12x8(2) SDRAM is used. */
+/*----------------------------------------------------------------------------- */
+ .globl sdram_init
+
+sdram_init:
+
+ mflr r31
+
+#ifdef CFG_SDRAM_MANUALLY
+ /*------------------------------------------------------------------- */
+ /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb0cf
+ mtdcr memcfga,r4
+ addis r4,0,MB0CF@h
+ ori r4,r4,MB0CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb1cf
+ mtdcr memcfga,r4
+ addis r4,0,MB1CF@h
+ ori r4,r4,MB1CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB2CF for bank 2. off */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb2cf
+ mtdcr memcfga,r4
+ addis r4,0,MB2CF@h
+ ori r4,r4,MB2CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set MB3CF for bank 3. off */
+ /*------------------------------------------------------------------- */
+
+ addi r4,0,mem_mb3cf
+ mtdcr memcfga,r4
+ addis r4,0,MB3CF@h
+ ori r4,r4,MB3CF@l
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */
+ /* To set the appropriate timings, we need to know the SDRAM speed. */
+ /* We can use the PLB speed since the SDRAM speed is the same as */
+ /* the PLB speed. The PLB speed is the FBK divider times the */
+ /* 405GP reference clock, which on the Walnut board is 33Mhz. */
+ /* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */
+ /* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */
+ /* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */
+ /* maybe 133Mhz. */
+ /*------------------------------------------------------------------- */
+
+ mfdcr r5,strap /* determine FBK divider */
+ /* via STRAP reg to calc PLB speed. */
+ /* SDRAM speed is the same as the PLB */
+ /* speed. */
+ rlwinm r4,r5,4,0x3 /* get FBK divide bits */
+
+..chk_66:
+ cmpi %cr0,0,r4,0x1
+ bne ..chk_100
+ addis r6,0,SDTR_66@h /* SDTR1 value for 66Mhz */
+ ori r6,r6,SDTR_66@l
+ addis r7,0,RTR_66 /* RTR value for 66Mhz */
+ b ..sdram_ok
+..chk_100:
+ cmpi %cr0,0,r4,0x2
+ bne ..chk_133
+ addis r6,0,SDTR_100@h /* SDTR1 value for 100Mhz */
+ ori r6,r6,SDTR_100@l
+ addis r7,0,RTR_100 /* RTR value for 100Mhz */
+ b ..sdram_ok
+..chk_133:
+ addis r6,0,0x0107 /* SDTR1 value for 133Mhz */
+ ori r6,r6,0x4015
+ addis r7,0,0x07F0 /* RTR value for 133Mhz */
+
+..sdram_ok:
+ /*------------------------------------------------------------------- */
+ /* Set SDTR1 */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_sdtr1
+ mtdcr memcfga,r4
+ mtdcr memcfgd,r6
+
+ /*------------------------------------------------------------------- */
+ /* Set RTR */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_rtr
+ mtdcr memcfga,r4
+ mtdcr memcfgd,r7
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure 200usec have elapsed since reset. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x0000
+ ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
+ mtctr r3
+..spinlp2:
+ bdnz ..spinlp2 /* spin loop */
+
+ /*------------------------------------------------------------------- */
+ /* Set memory controller options reg, MCOPT1. */
+ /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
+ /* read/prefetch. */
+ /*------------------------------------------------------------------- */
+ addi r4,0,mem_mcopt1
+ mtdcr memcfga,r4
+ addis r4,0,0x8080 /* set DC_EN=1 */
+ ori r4,r4,0x0000
+ mtdcr memcfgd,r4
+
+ /*------------------------------------------------------------------- */
+ /* Delay to ensure 10msec have elapsed since reset. This is */
+ /* required for the MPC952 to stabalize. Assume worst */
+ /* case that the core is running 200Mhz: */
+ /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
+ /* This delay should occur before accessing SDRAM. */
+ /*------------------------------------------------------------------- */
+ addis r3,0,0x001E
+ ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
+ mtctr r3
+..spinlp3:
+ bdnz ..spinlp3 /* spin loop */
+
+#else
+/*fixme: do SDRAM Autoconfig from EEPROM here */
+
+#endif
+ mtlr r31 /* restore lr */
+ blr