1 files changed, 0 insertions, 99 deletions
diff --git a/board/amcc/bluestone/bluestone.c b/board/amcc/bluestone/bluestone.c
deleted file mode 100644
index 6520f75c68..0000000000
--- a/board/amcc/bluestone/bluestone.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Bluestone board support
- *
- * Copyright (c) 2010, Applied Micro Circuits Corporation
- * Author: Tirumala R Marri <tmarri@apm.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/apm821xx.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx-gpio.h>
-
-int board_early_init_f(void)
-{
-	/*
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC0ER, 0x00000000);	/* disable all */
-	mtdcr(UIC0CR, 0x00000005);	/* ATI & UIC1 crit are critical */
-	mtdcr(UIC0PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC0TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC0VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC0SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC1ER, 0x00000000);	/* disable all */
-	mtdcr(UIC1CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC1PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC1TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC1VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC1SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC2ER, 0x00000000);	/* disable all */
-	mtdcr(UIC2CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC2PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC2TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC2VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC2SR, 0xffffffff);	/* clear all */
-
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-	mtdcr(UIC3ER, 0x00000000);	/* disable all */
-	mtdcr(UIC3CR, 0x00000000);	/* all non-critical */
-	mtdcr(UIC3PR, 0xffffffff);	/* per ref-board manual */
-	mtdcr(UIC3TR, 0x00000000);	/* per ref-board manual */
-	mtdcr(UIC3VR, 0x00000000);	/* int31 highest, base=0x000 */
-	mtdcr(UIC3SR, 0xffffffff);	/* clear all */
-
-	/*
-	 * Configure PFC (Pin Function Control) registers
-	 * UART0: 2 pins
-	 */
-	mtsdr(SDR0_PFC1, 0x0000000);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char buf[64];
-	int i = getenv_f("serial#", buf, sizeof(buf));
-
-	puts("Board: Bluestone Evaluation Board");
-
-	if (i > 0) {
-		puts(", serial# ");
-		puts(buf);
-	}
-	putc('\n');
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	u32 sdr0_srst1 = 0;
-
-	/* Setup PLB4-AHB bridge based on the system address map */
-	mtdcr(AHB_TOP, 0x8000004B);
-	mtdcr(AHB_BOT, 0x8000004B);
-
-	/*
-	 * The AHB Bridge core is held in reset after power-on or reset
-	 * so enable it now
-	 */
-	mfsdr(SDR0_SRST1, sdr0_srst1);
-	sdr0_srst1 &= ~SDR0_SRST1_AHB;
-	mtsdr(SDR0_SRST1, sdr0_srst1);
-
-	return 0;
-}