1 files changed, 0 insertions, 79 deletions
diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c
index 0fbbc3456c..97fb902f8e 100644
--- a/board/altera/cyclone5-socdk/socfpga.c
+++ b/board/altera/cyclone5-socdk/socfpga.c
@@ -3,83 +3,4 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-
 #include <common.h>
-#include <asm/arch/reset_manager.h>
-#include <asm/io.h>
-
-#include <usb.h>
-#include <usb/dwc2_udc.h>
-#include <usb_mass_storage.h>
-
-#include <micrel.h>
-#include <netdev.h>
-#include <phy.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void s_init(void) {}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-int board_init(void)
-{
-	/* Address of boot parameters for ATAG (if ATAG is used) */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-	return 0;
-}
-
-/*
- * PHY configuration
- */
-#ifdef CONFIG_PHY_MICREL_KSZ9021
-int board_phy_config(struct phy_device *phydev)
-{
-	int ret;
-	/*
-	 * These skew settings for the KSZ9021 ethernet phy is required for ethernet
-	 * to work reliably on most flavors of cyclone5 boards.
-	 */
-	ret = ksz9021_phy_extended_write(phydev,
-					 MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
-					 0x0);
-	if (ret)
-		return ret;
-
-	ret = ksz9021_phy_extended_write(phydev,
-					 MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
-					 0x0);
-	if (ret)
-		return ret;
-
-	ret = ksz9021_phy_extended_write(phydev,
-					 MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
-					 0xf0f0);
-	if (ret)
-		return ret;
-
-	if (phydev->drv->config)
-		return phydev->drv->config(phydev);
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_USB_GADGET
-struct dwc2_plat_otg_data socfpga_otg_data = {
-	.regs_otg	= CONFIG_USB_DWC2_REG_ADDR,
-	.usb_gusbcfg	= 0x1417,
-};
-
-int board_usb_init(int index, enum usb_init_type init)
-{
-	return dwc2_udc_probe(&socfpga_otg_data);
-}
-
-int g_dnl_board_usb_cable_connected(void)
-{
-	return 1;
-}
-#endif