diff options
Diffstat (limited to 'arch/arm/mach-mvebu/cpu.c')
| -rw-r--r-- | arch/arm/mach-mvebu/cpu.c | 103 |
1 files changed, 86 insertions, 17 deletions
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 9496d5fc5b..ea83e21d43 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -18,19 +18,13 @@ #define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) static struct mbus_win windows[] = { - /* PCIE MEM address space */ - { DEFADR_PCI_MEM, 256 << 20, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_MEM }, - - /* PCIE IO address space */ - { DEFADR_PCI_IO, 64 << 10, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_IO }, - /* SPI */ - { DEFADR_SPIF, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, - CPU_ATTR_SPIFLASH }, + { MBUS_SPI_BASE, MBUS_SPI_SIZE, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_SPIFLASH }, /* NOR */ - { DEFADR_BOOTROM, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, - CPU_ATTR_BOOTROM }, + { MBUS_BOOTROM_BASE, MBUS_BOOTROM_SIZE, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI, CPU_ATTR_BOOTROM }, }; void reset_cpu(unsigned long ignored) @@ -177,17 +171,69 @@ static void set_cbar(u32 addr) asm("mcr p15, 4, %0, c15, c0" : : "r" (addr)); } +#define MV_USB_PHY_BASE (MVEBU_AXP_USB_BASE + 0x800) +#define MV_USB_PHY_PLL_REG(reg) (MV_USB_PHY_BASE | (((reg) & 0xF) << 2)) +#define MV_USB_X3_BASE(addr) (MVEBU_AXP_USB_BASE | BIT(11) | \ + (((addr) & 0xF) << 6)) +#define MV_USB_X3_PHY_CHANNEL(dev, reg) (MV_USB_X3_BASE((dev) + 1) | \ + (((reg) & 0xF) << 2)) -int arch_cpu_init(void) +static void setup_usb_phys(void) { -#ifndef CONFIG_SPL_BUILD + int dev; + + /* + * USB PLL init + */ + + /* Setup PLL frequency */ + /* USB REF frequency = 25 MHz */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(1), 0x3ff, 0x605); + + /* Power up PLL and PHY channel */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(2), 0, BIT(9)); + + /* Assert VCOCAL_START */ + clrsetbits_le32(MV_USB_PHY_PLL_REG(1), 0, BIT(21)); + + mdelay(1); + /* - * Only with disabled MMU its possible to switch the base - * register address on Armada 38x. Without this the SDRAM - * located at >= 0x4000.0000 is also not accessible, as its - * still locked to cache. + * USB PHY init (change from defaults) specific for 40nm (78X30 78X60) */ - mmu_disable(); + + for (dev = 0; dev < 3; dev++) { + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 3), 0, BIT(15)); + + /* Assert REG_RCAL_START in channel REG 1 */ + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), 0, BIT(12)); + udelay(40); + clrsetbits_le32(MV_USB_X3_PHY_CHANNEL(dev, 1), BIT(12), 0); + } +} + +int arch_cpu_init(void) +{ +#ifndef CONFIG_SPL_BUILD + if (mvebu_soc_family() == MVEBU_SOC_A38X) { + struct pl310_regs *const pl310 = + (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + + /* + * Only with disabled MMU its possible to switch the base + * register address on Armada 38x. Without this the SDRAM + * located at >= 0x4000.0000 is also not accessible, as its + * still locked to cache. + * + * So to fully release / unlock this area from cache, we need + * to first flush all caches, then disable the MMU and + * disable the L2 cache. + */ + icache_disable(); + dcache_disable(); + mmu_disable(); + clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); + } #endif /* Linux expects the internal registers to be at 0xf1000000 */ @@ -227,10 +273,33 @@ int arch_cpu_init(void) */ mvebu_mbus_probe(windows, ARRAY_SIZE(windows)); + if (mvebu_soc_family() == MVEBU_SOC_AXP) { + /* Enable GBE0, GBE1, LCD and NFC PUP */ + clrsetbits_le32(ARMADA_XP_PUP_ENABLE, 0, + GE0_PUP_EN | GE1_PUP_EN | LCD_PUP_EN | + NAND_PUP_EN | SPI_PUP_EN); + + /* Configure USB PLL and PHYs on AXP */ + setup_usb_phys(); + } + + /* Enable NAND and NAND arbiter */ + clrsetbits_le32(MVEBU_SOC_DEV_MUX_REG, 0, NAND_EN | NAND_ARBITER_EN); + + /* Disable MBUS error propagation */ + clrsetbits_le32(SOC_COHERENCY_FABRIC_CTRL_REG, MBUS_ERR_PROP_EN, 0); + return 0; } #endif /* CONFIG_ARCH_CPU_INIT */ +u32 mvebu_get_nand_clock(void) +{ + return CONFIG_SYS_MVEBU_PLL_CLOCK / + ((readl(MVEBU_CORE_DIV_CLK_CTRL(1)) & + NAND_ECC_DIVCKL_RATIO_MASK) >> NAND_ECC_DIVCKL_RATIO_OFFS); +} + /* * SOC specific misc init */ |