diff options
Diffstat (limited to 'arch/arm/dts/k3-am625-verdin.dts')
| -rw-r--r-- | arch/arm/dts/k3-am625-verdin.dts | 40 |
1 files changed, 0 insertions, 40 deletions
diff --git a/arch/arm/dts/k3-am625-verdin.dts b/arch/arm/dts/k3-am625-verdin.dts index 0c07cad51c..736c513f5f 100644 --- a/arch/arm/dts/k3-am625-verdin.dts +++ b/arch/arm/dts/k3-am625-verdin.dts @@ -5,9 +5,6 @@ /dts-v1/; -/* remove once our HW arrives */ -#define SKEVM - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/net/ti-dp83867.h> @@ -39,16 +36,11 @@ /* Verdin SD_1 Power Supply */ reg_sdhc1_vmmc: regulator-sdhci1 { compatible = "regulator-fixed"; -#ifdef SKEVM - enable-active-high; - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; -#else pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd1_pwr_en>; enable-active-high; /* Verdin SD_1_PWR_EN (SODIMM 76) */ gpio = <&main_gpio0 29 GPIO_ACTIVE_HIGH>; -#endif off-on-delay-us = <100000>; regulator-max-microvolt = <3300000>; regulator-min-microvolt = <3300000>; @@ -61,11 +53,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vsel_sd>; /* PMIC_VSEL_SD */ -#ifdef SKEVM - gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; -#else gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>; -#endif regulator-name = "LDO1-VSEL-SD (PMIC)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -139,7 +127,6 @@ &cpsw3g_mdio { cpsw3g_phy0: ethernet-phy@0 { reg = <0>; -#ifndef SKEVM assigned-clocks = <&k3_clks 157 20>; assigned-clock-parents = <&k3_clks 157 22>; assigned-clock-rates = <25000000>; @@ -150,7 +137,6 @@ reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_LOW>; reset-assert-us = <10>; reset-deassert-us = <1000>; -#endif ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; ti,min-output-impedance; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; @@ -181,28 +167,6 @@ &main_i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; -#ifdef SKEVM - clock-frequency = <400000>; - - exp1: gpio@22 { - compatible = "ti,tca6424"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", - "PRU_DETECT", "MMC1_SD_EN", - "VPP_LDO_EN", "EXP_PS_3V3_En", - "EXP_PS_5V0_En", "EXP_HAT_DETECT", - "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn", - "UART1_FET_BUF_EN", "WL_LT_EN", - "GPIO_HDMI_RSTn", "CSI_GPIO1", - "CSI_GPIO2", "PRU_3V3_EN", - "HDMI_INTn", "TEST_GPIO2", - "MCASP1_FET_EN", "MCASP1_BUF_BT_EN", - "MCASP1_FET_SEL", "UART1_FET_SEL", - "TSINT#", "IO_EXP_TEST_LED"; - }; -#endif /* EEPROM on display adapter (MIPI DSI Display Adapter) */ eeprom_display_adapter: eeprom@50 { @@ -230,11 +194,7 @@ /* PMIC_VSEL_SD */ pinctrl_vsel_sd: main-gpio0-21-pins-default { pinctrl-single,pins = < -#ifndef SKEVM AM62X_IOPAD(0x0054, PIN_INPUT, 7) /* (P21) GPMC0_AD6.GPIO0_21 */ -#else - AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */ -#endif >; }; |