diff options
| -rw-r--r-- | arch/nios2/cpu/cpu.c | 8 | ||||
| -rw-r--r-- | configs/10m50_defconfig | 1 | ||||
| -rw-r--r-- | configs/3c120_defconfig | 1 | ||||
| -rw-r--r-- | doc/driver-model/serial-howto.txt | 2 | ||||
| -rw-r--r-- | drivers/mtd/altera_qspi.c | 1 | ||||
| -rw-r--r-- | include/configs/10m50_devboard.h | 33 | ||||
| -rw-r--r-- | include/configs/3c120_devboard.h | 33 |
7 files changed, 47 insertions, 32 deletions
diff --git a/arch/nios2/cpu/cpu.c b/arch/nios2/cpu/cpu.c index f6d5cd399a..be7f99c1de 100644 --- a/arch/nios2/cpu/cpu.c +++ b/arch/nios2/cpu/cpu.c @@ -21,6 +21,14 @@ int print_cpuinfo(void) } #endif /* CONFIG_DISPLAY_CPUINFO */ +#ifdef CONFIG_ALTERA_SYSID +int checkboard(void) +{ + display_sysid(); + return 0; +} +#endif + int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { disable_interrupts(); diff --git a/configs/10m50_defconfig b/configs/10m50_defconfig index 0d18e8da8c..a0d29a087b 100644 --- a/configs/10m50_defconfig +++ b/configs/10m50_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_CONFIG_NAME="10m50_devboard" CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard" +CONFIG_FIT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set diff --git a/configs/3c120_defconfig b/configs/3c120_defconfig index 8bc13f34c7..9d249c74f5 100644 --- a/configs/3c120_defconfig +++ b/configs/3c120_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_CONFIG_NAME="3c120_devboard" CONFIG_DM_SERIAL=y CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard" +CONFIG_FIT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_CPU=y # CONFIG_CMD_BOOTD is not set diff --git a/doc/driver-model/serial-howto.txt b/doc/driver-model/serial-howto.txt index 76ad629ef9..4706d56ea7 100644 --- a/doc/driver-model/serial-howto.txt +++ b/doc/driver-model/serial-howto.txt @@ -4,8 +4,6 @@ How to port a serial driver to driver model About 16 of 33 serial drivers have been converted as at September 2015. It is time for maintainers to start converting over the remaining serial drivers: - altera_jtag_uart.c - altera_uart.c arm_dcc.c lpc32xx_hsuart.c mcfuart.c diff --git a/drivers/mtd/altera_qspi.c b/drivers/mtd/altera_qspi.c index 617bf5d72d..c7e37add01 100644 --- a/drivers/mtd/altera_qspi.c +++ b/drivers/mtd/altera_qspi.c @@ -81,6 +81,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last) int ret; memset(&instr, 0, sizeof(instr)); + instr.mtd = mtd; instr.addr = mtd->erasesize * s_first; instr.len = mtd->erasesize * (s_last + 1 - s_first); ret = mtd_erase(mtd, &instr); diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index 8a91cdbd22..8dfe2a8e5a 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -54,19 +54,6 @@ #define CONFIG_LMB /* - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the - * reset address, no? This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - */ -#define CONFIG_ENV_IS_IN_FLASH - -#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR 0xf4040000 - -/* * MEMORY ORGANIZATION * -Monitor at top of sdram. * -The heap is placed below the monitor @@ -76,13 +63,26 @@ #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */ +#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ CONFIG_SYS_SDRAM_SIZE - \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MALLOC_LEN 0x20000 /* + * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above + * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + */ +#define CONFIG_ENV_IS_IN_FLASH + +#define CONFIG_ENV_SIZE 0x10000 /* 64k, 1 sector */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CONFIG_ENV_ADDR (0xf4000000 + CONFIG_SYS_MONITOR_LEN) + +/* * MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ @@ -92,12 +92,15 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + \ 16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */ +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \ CONFIG_ENV_SIZE - \ CONFIG_SYS_MALLOC_LEN - \ 0x10000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #endif /* __CONFIG_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index 2ecdd5d896..2e94b69f87 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -57,19 +57,6 @@ #define CONFIG_LMB /* - * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above - * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the - * reset address, no? This will keep the environment in user region - * of flash. NOTE: the monitor length must be multiple of sector size - * (which is common practice). - */ -#define CONFIG_ENV_IS_IN_FLASH - -#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */ -#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ -#define CONFIG_ENV_ADDR 0xe2840000 - -/* * MEMORY ORGANIZATION * -Monitor at top of sdram. * -The heap is placed below the monitor @@ -79,13 +66,26 @@ #define CONFIG_SYS_SDRAM_SIZE 0x08000000 #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256k */ +#define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ CONFIG_SYS_SDRAM_SIZE - \ CONFIG_SYS_MONITOR_LEN) #define CONFIG_SYS_MALLOC_LEN 0x20000 /* + * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above + * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + */ +#define CONFIG_ENV_IS_IN_FLASH + +#define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CONFIG_ENV_ADDR (0xe2800000 + CONFIG_SYS_MONITOR_LEN) + +/* * MISC */ #define CONFIG_SYS_LONGHELP /* Provide extended help */ @@ -95,12 +95,15 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + \ 16) /* Print buf size */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */ +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \ CONFIG_ENV_SIZE - \ CONFIG_SYS_MALLOC_LEN - \ 0x10000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING #endif /* __CONFIG_H */ |