summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c2
-rw-r--r--board/LEOX/elpt860/README.LEOX1
-rw-r--r--board/palmtreo680/README17
-rw-r--r--board/sandpoint/README2
-rw-r--r--board/siemens/rut/board.c4
-rw-r--r--doc/README.gpt7
-rw-r--r--doc/README.p1010rdb1
-rw-r--r--doc/README.qemu-mips1
-rw-r--r--doc/driver-model/UDM-block.txt1
-rw-r--r--drivers/usb/gadget/f_mass_storage.c5
-rw-r--r--include/configs/T4240EMU.h4
-rw-r--r--tools/buildman/README1
12 files changed, 0 insertions, 46 deletions
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index 7a7caded03..764620d62a 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -526,8 +526,6 @@ struct prcm_regs const omap5_es2_prcm = {
.cm1_abe_timer8_clkctrl = 0x4a004580,
.cm1_abe_wdt3_clkctrl = 0x4a004588,
-
-
/* cm2.ckgen */
.cm_clksel_mpu_m3_iss_root = 0x4a008100,
.cm_clksel_usb_60mhz = 0x4a008104,
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
index fe3c0f1528..aa41ff8fd2 100644
--- a/board/LEOX/elpt860/README.LEOX
+++ b/board/LEOX/elpt860/README.LEOX
@@ -46,7 +46,6 @@ U-Boot, at the address of 0x03000000.
=============================================================================
-
##################################################
# Operation on the serial console (SMC1)
##############################
diff --git a/board/palmtreo680/README b/board/palmtreo680/README
index 46828eb84f..c8799c6ab1 100644
--- a/board/palmtreo680/README
+++ b/board/palmtreo680/README
@@ -30,7 +30,6 @@ go wrong, but please tell me what happened exactly. For that matter, I'd love
to hear from you if you succeed.
-
Details on the SPL
==================
@@ -51,7 +50,6 @@ IPL has already loaded to its correct SDRAM address, and then loads the
remainder of u-boot and jumps to it.
-
The docg4's "reliable mode"
===========================
@@ -79,7 +77,6 @@ module parameter), but not reading. However, the u-boot docg4_spl driver does
read in reliable mode, in the same fashion as the IPL.
-
Details on the IPL and its data format
======================================
@@ -105,7 +102,6 @@ For the sake of simplicity and uniformity, the u-boot SPL mimics the operation
of the IPL, and expects the image to be stored in the same format.
-
Instructions on Programming u-boot to flash
===========================================
@@ -117,7 +113,6 @@ remainder of this document describes in detail how to program u-boot to the
flash using Linux running on the Treo.
-
Hardware Prerequisites
======================
@@ -136,7 +131,6 @@ A Linux desktop PC.
to flash, you'll really want to use a Linux PC.
-
Treo-side Software Prerequisites
================================
@@ -152,7 +146,6 @@ Linux bootloader for PalmOS:
parameters passed to the kernel.
-
Linux kernel:
The kernel on the Treo 680 is still a little rough around the edges, and the
@@ -200,7 +193,6 @@ Linux kernel:
and /dev/mtd2 for these partitions, respectively. Ensure that your root file
system at least has /dev/mtd1 if you are not running udev or mdev.
-
Userspace Utilities:
In addition to everything necessary to provide a useful userspace environment
@@ -221,19 +213,16 @@ Userspace Utilities:
from the mtd-utils package.
-
Desktop PC-side Software Prerequisites
======================================
Terminal emulator application:
minicom, kermit, etc.
-
Linux kernel:
Compiled with CONFIG_USB_SERIAL enabled. Build this as a module.
-
Recommended (Not directly related to u-boot)
============================================
@@ -275,7 +264,6 @@ configure the usb0 interface on the desktop.) Use the nfs 'nolock' option when
mounting to avoid the need to run a portmapper like rpcbind.
-
Preliminaries
=============
@@ -397,7 +385,6 @@ forget to copy the file to permanent storage, such as an mmc card.
If all of the above went well, you can now program u-boot.
-
Programming u-boot
==================
@@ -438,7 +425,6 @@ four blocks in /dev/mtd1; i.e., at offsets 0x00000, 0x40000, 0x80000, 0xc0000.
Shutdown linux, remove and re-insert the battery, hold your breath...
-
Enjoying u-boot
===============
@@ -478,7 +464,6 @@ support for reliable mode in u-boot's docg4 flash driver. This should be
corrected soon.
-
Customizing
===========
@@ -511,7 +496,6 @@ in flash did not seem worth the cost of a 256k flash block. But adding this
should be straightforward.
-
Restoring PalmOS
================
@@ -568,7 +552,6 @@ modprobe docg4 ignore_badblocks=1 || exit 1
dd if=$1 bs=1 skip=$file_ofs count=540672 | nandwrite -o -n -s 0x80000 $2 - || exit 1
modprobe -r docg4
-
TODO
====
diff --git a/board/sandpoint/README b/board/sandpoint/README
index a2e0831f33..c9996a8c06 100644
--- a/board/sandpoint/README
+++ b/board/sandpoint/README
@@ -15,8 +15,6 @@ tkoeller@gmx.net.
Thomas Koeller
-
-
The port was tested on a Sandpoint 8240 X3 board, with U-Boot
installed in the flash memory of the CPU card. Please use the
following DIP switch settings:
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index f2b0476817..5de8fc6cbf 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -328,8 +328,6 @@ static int get_clk(struct dpll_regs *dpll_regs)
return f;
};
-
-
int clk_get(int clk)
{
return get_clk(&dpll_lcd_regs);
@@ -426,7 +424,5 @@ static int board_video_init(void)
return 0;
}
-
-
#endif /* ifdef CONFIG_VIDEO */
#include "../common/board.c"
diff --git a/doc/README.gpt b/doc/README.gpt
index 81dfe584c5..5c133f3321 100644
--- a/doc/README.gpt
+++ b/doc/README.gpt
@@ -6,7 +6,6 @@
#
# SPDX-License-Identifier: GPL-2.0+
-
Glossary:
========
- UUID -(Universally Unique Identifier)
@@ -22,7 +21,6 @@ Introduction:
This document describes the GPT partition table format and usage of
the gpt command in u-boot.
-
UUID introduction:
====================
@@ -78,7 +76,6 @@ GPT brief explanation:
LBA -1 |Secondary GPT Header |
----------------------------------------------------------
-
For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called
"protective MBR".
Its first partition entry ID has 0xEE value, and disk software, which is not
@@ -114,7 +111,6 @@ Offset Size Description
TOTAL: 512 B
-
IMPORTANT:
GPT headers and partition entries are protected by CRC32 (the POSIX CRC32).
@@ -132,7 +128,6 @@ sizeof(partition_entry_size (usually 128)))
Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect
of the Primary.
-
Partition Entry Format:
----------------------
Offset Size Description
@@ -150,7 +145,6 @@ of the Primary.
Bit 62 - Hidden
Bit 63 - Not mount
-
Creating GPT partitions in U-Boot:
==============
@@ -171,7 +165,6 @@ To restore GUID partition table one needs to:
2. From u-boot prompt type:
gpt write mmc 0 $partitions
-
Useful info:
============
diff --git a/doc/README.p1010rdb b/doc/README.p1010rdb
index dee63d713a..6b2b5ff3fb 100644
--- a/doc/README.p1010rdb
+++ b/doc/README.p1010rdb
@@ -185,7 +185,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz):
=> reset
-
Boot Linux from network using TFTP on P1010RDB
==============================================
Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area.
diff --git a/doc/README.qemu-mips b/doc/README.qemu-mips
index 1fdfbab677..a192752f4d 100644
--- a/doc/README.qemu-mips
+++ b/doc/README.qemu-mips
@@ -15,7 +15,6 @@ recent qemu versions. When using emulated flash, launch with
-pflash <filename> and erase mips_bios.bin.
-
Notes for the Qemu MIPS port
----------------------------
diff --git a/doc/driver-model/UDM-block.txt b/doc/driver-model/UDM-block.txt
index b42ec69c94..ffbbdf3a7a 100644
--- a/doc/driver-model/UDM-block.txt
+++ b/doc/driver-model/UDM-block.txt
@@ -218,7 +218,6 @@ II) Approach
in near future.
-
III) Analysis of in-tree drivers
--------------------------------
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index b34068a0bb..6ecdea3e14 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -9,7 +9,6 @@
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
-
/*
* The Mass Storage Function acts as a USB Mass Storage device,
* appearing to the host as a disk drive or as a CD-ROM drive. In
@@ -153,7 +152,6 @@
* <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
*/
-
/*
* Driver Design
*
@@ -264,7 +262,6 @@
static const char fsg_string_interface[] = "Mass Storage";
-
#define FSG_NO_INTR_EP 1
#define FSG_NO_DEVICE_STRINGS 1
#define FSG_NO_OTG 1
@@ -2629,8 +2626,6 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
return ret;
}
-
-
static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct fsg_dev *fsg = fsg_from_func(f);
diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h
index 9fa6b77ab1..5e228f3556 100644
--- a/include/configs/T4240EMU.h
+++ b/include/configs/T4240EMU.h
@@ -30,7 +30,6 @@
#define CONFIG_DDR_CLK_FREQ 133333333
#define CONFIG_FSL_TBCLK_EXTRA_DIV 100
-
/*
* DDR Setup
*/
@@ -76,7 +75,6 @@
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-
/* I2C */
#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */
#define CONFIG_SYS_FSL_I2C2_SPEED 4000000
@@ -104,8 +102,6 @@
#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-
-
#define CONFIG_BOOTDELAY 0
/*
diff --git a/tools/buildman/README b/tools/buildman/README
index f63f278673..090b653116 100644
--- a/tools/buildman/README
+++ b/tools/buildman/README
@@ -677,7 +677,6 @@ the build speed by building all commits for a board instead of the other
way around.
-
Simon Glass
sjg@chromium.org
Halloween 2012